44169 2017 eng lecture 0 -- -- -- Several Additive Manufacturing (AM) processes are based on the deposition of a powder to form a powder bed layer-by-layer, which typically has a low packing density (35-50%) and consequently hinders the ability of sintering ceramic parts to full density. The layerwise slurry deposition (LSD) is an innovative process for the deposition of layers in AM. In the LSD, a slurry with no or small organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition, the ceramic particles settle to form thin layers with a high packing density (55-60%). When coupled with a printing head or with a laser, the LSD enables novel AM technologies inspired to the 3D printing or selective laser sintering, but taking advantage of having a highly dense powder-bed. The LSD combined with inkjet binder printing (LSD-print) was applied to a submicron Al2O3 powder to produce samples which had a comparable density to uniaxially pressed samples, both in the green and in the sintered state. 92nd DKG Annual Meeting & Symposium on High-Performance Ceramics 2017 Berlin, Germany 19.03.2017 22.03.2017 0 Andrea Zocca eng uncontrolled Layerwise slurry deposition eng uncontrolled Ceramic eng uncontrolled Additive Manufacturing eng uncontrolled 3D Printing Ingenieurwissenschaften und zugeordnete Tätigkeiten Datei im Netzwerk der BAM verfügbar ("Closed Access") Präsentation