<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>57993</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>357</pageFirst>
    <pageLast>365</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>12</volume>
    <type>conferenceobject</type>
    <publisherName>Shaker</publisherName>
    <publisherPlace>Düren</publisherPlace>
    <creatingCorporation>Clausthaler Zentrum für Materialtechnik</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Einfluss der Schweiß- und Prüfparameter bei der Heißrissbewertung hochfester Schweißzusatzwerkstoffe</title>
    <abstract language="deu">Die Heißrissneigung beim Schweißen kann mittels einer ganzen Reihe von Prüfverfahren ermittelt werden. Eine etablierte Methode ist die sogenannte Varestraint-Prüfung, welche auch an der Bundesanstalt für Materialforschung und -prüfung (BAM) als modifizierter Varestraint/Transvarestraint-Test (MVT) zum Einsatz kommt. Die Ergebnisse von Varestraint-Prüfungen hängen jedoch stets in unter-schiedlichem Maße von der individuellen Prüfmaschinenauslegung und den verwendeten Prüfparametern ab. Dies kann zu einer uneinheitlichen Bewertung des Rissverhaltens führen, wenn die Risslänge konventionell als Kriterium für die Rissneigung herangezogen wird. Scheinbare Abhängigkeiten von Prozessparametern erschweren dann die Interpretation der Ergebnisse. Eine neuartige Bewertungsmethodik entkoppelt den Maschineneinfluss vom Materialverhalten und verwendet die Dehnrate als Risskriterium.</abstract>
    <parentTitle language="deu">Fortschrittsberichte der Materialforschung und Werkstofftechnik</parentTitle>
    <identifier type="issn">2364-0804</identifier>
    <identifier type="isbn">978-3-8440-9105-2</identifier>
    <enrichment key="eventName">5. Symposium Materialtechnik</enrichment>
    <enrichment key="eventPlace">Clausthal-Zellerfeld, Germany</enrichment>
    <enrichment key="eventStart">23.02.2023</enrichment>
    <enrichment key="eventEnd">24.02.2023</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Arne Kromm</author>
    <author>Maximilian Thomas</author>
    <author>Philipp Liepold</author>
    <author>Thomas Kannengießer</author>
    <author>Dirk Schröpfer</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Heißrisse</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Varestraint-Test</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
  </doc>
  <doc>
    <id>60673</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Repair welding of pressurized in-service hydrogen pipelines: A review on current challenges and strategies</title>
    <abstract language="eng">As energy carrier of the future, green hydrogen can make a decisive contribution to a sustainable energy supply. In Europe concrete plans for a hydrogen pipeline grid already exist, as the so called “European Hydrogen backbone”. As building a completely new pipeline grid is economically not justifiable, a dual-way strategy of repurposing natural gas (NG) pipelines and newly built pipelines is intended. Long distance pipeline grids require regular maintenance and repairs. In that conection, for natural gas (NG) pipelines in-service welding is state of the art. Concepts such as hot-tapping (drilling into pressurized pipelines) and “stoppling” (sealing off pipeline sections after installing bypasses or pressure relieves) allow the repair of damaged pipeline sections or the installation of new branches without shutting the pipeline down. The EIGA 121/14 guideline already pointed out in 2014 that “a hydrogen hot-tap shall not be considered a routine procedure”. This shows that the determination of the transferability of these repair concepts to hydrogen pipelines is of utmost importance. Due to the degrading effects of hydrogen on mechanical proper-ties, commonly referred to as “hydrogen embrittlement” it is necessary to understand and investigate the occurring effects. In the special case of repair welding on in-service hydrogen pipelines an increased hydro-gen uptake due to a large heat input and microstructural changes in the material needs to be considered. For this reason, this paper gives an overview on existing weld repair concepts and its risks and limitations in terms of hydrogen absorption and possible embrittlement effects when transferred to hydrogen pipelines. The complexity lies in a large variety of materials (low alloyed steels), pipeline diameters and corresponding welded joints. The material compatibility of materials in used (repurposed NG-pipelines) and new condition must be investigated. Particularly for repurposed/used pipelines the effect of a pre-matured/corroded inner surface and sometimes insufficient documentation of the material “history” needs to be considered. An overview on ongoing and completed R&amp;D-projects with respect to repair concepts for hydrogen pipelines and hydrogen effects on pipeline materials is given.</abstract>
    <enrichment key="eventName">77th IIW Annual Assembly and International Conference, Meeting of Commission XI "Pressure Vessels and Piping"</enrichment>
    <enrichment key="eventPlace">Ixia, Rhodes, Greece</enrichment>
    <enrichment key="eventStart">07.07.2024</enrichment>
    <enrichment key="eventEnd">12.07.2024</enrichment>
    <enrichment key="InvitedTalks">1</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Michael Rhode</author>
    <author>Sebastian Kaiser</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Repair welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Pipelines</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Study</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>60050</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Effiziente Reparaturkonzepte mittels geregelter MSG Hochleistungsprozesse bei der Fertigung hochfester Dickblechverbindungen für Offshore Windenergieanlagen P1629</title>
    <abstract language="deu">Der Bau von Gründungs- und Turmstrukturen für Windkraftanlagen erfordert den Einsatz moderner, nachhaltiger und ressourcenschonender hochfester Feinkornbaustähle. Durch den Schweißprozess verursachte Schweißnahtfehler sind nicht akzeptabel. Um diese zu beheben, ist das lokale thermische Fugenhobeln mit anschließendem Reparaturschweißen ein gängiges und wirtschaftliches Verfahren. Die hohe Schrumpfbehinderung um die ausgefugte Nut durch das umgebende Gefüge kann zu Rissbildung führen, wenn sich konstruktiv bedingte Spannungen und Eigenspannungen aus der Reparaturschweißung überlagern. Diese Gefahr wird durch die Verschlechterung der Mikrostruktur und der mechanischen Eigenschaften hochfester Stähle während des Schweißreparaturprozesses noch verstärkt.</abstract>
    <enrichment key="eventName">Bachelor-, Master-, Doktoranden-Kolloquium</enrichment>
    <enrichment key="eventPlace">Magdeburg, Germany</enrichment>
    <enrichment key="eventStart">16.05.2024</enrichment>
    <enrichment key="eventEnd">16.05.2024</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Levin Reichel</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reparaturschweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Thermisches Ausfugen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Offshore</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Sprühlichtbogen</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>57411</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Fügetechnik in Wasserstofftechnologien Ein aktueller Überblick</title>
    <abstract language="deu">Der Vortrag gibt einen kurzen Überblick über die Bedeutung der Fügetechnik in Wasserstofftechnologien und über zukünftige Herausforderungen. Fügetechnologien, insbesondere die Schweißtechnik, haben dabei wesentliche Bedeutung für die  Umsetzung von technischen Komponenten der Wasserstofftechnologien. Forschungsschwerpunkte ergeben sich insbesondere für die Erzeugung und den Transport des Wasserstoffs.</abstract>
    <enrichment key="eventName">Vortragsreihe des DVS Bezirksverbandes Mannheim-Ludwigshafen</enrichment>
    <enrichment key="eventPlace">Online meeting</enrichment>
    <enrichment key="eventStart">27.04.2023</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Schweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Studie</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.0 Abteilungsleitung und andere</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>57222</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Welding (and joining) technologies for the hydrogen economy - a short overview</title>
    <abstract language="eng">This study gives an overview on the important field of joining processes for component fabrication in hydrogen technologies. The current main issues and future perspectives are highlighted for the different technological field of hydrogen generation, storage, transport and use. In addition, the emerging field of additive manufacturing is included. Some remarks are given for standardization and regulations.</abstract>
    <enrichment key="eventName">Meeting of the European Welding Association (EWA), Executive Committee (EC) 1</enrichment>
    <enrichment key="eventPlace">Frankfurt am Main, Germany</enrichment>
    <enrichment key="eventStart">22.03.2023</enrichment>
    <enrichment key="eventEnd">22.03.2023</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="InvitedTalks">1</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Research</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Study</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="ddc" number="624">Ingenieurbau</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Infrastruktur</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>57517</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Bewertung und Vermeidung von schweißverarbeitungsbedingten Rissen in hochfesten Baustählen</title>
    <abstract language="deu">Die vorliegende Präsentation fasst die Ergebnisse von drei laufenden bzw. beendeten AiF/IGF-Projekten zusammen, die über die Forschungsvereinigung Stahlanwendung FOSTA e.V. an der BAM bearbeitet wurden zum Thema: Bewertung und Vermeidung von schweißverarbeitungsbedingten Rissen in hochfesten Baustählen.</abstract>
    <enrichment key="eventName">FOSTA Tagung: Hochfester Stahl im Stahl und Anlagenbau</enrichment>
    <enrichment key="eventPlace">Essen, Germany</enrichment>
    <enrichment key="eventStart">16.05.2023</enrichment>
    <enrichment key="eventEnd">17.05.2023</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Studie</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Schweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Hochfester Stahl</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Riss</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Forschung</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.0 Abteilungsleitung und andere</collection>
  </doc>
  <doc>
    <id>57289</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Eigenspannungen in mittels DED-Arc gefertigten Bauteilen aus hochfestem Stahl</title>
    <abstract language="deu">Der Vortrag gibt einen Überblick über die mittels XRD und Neutronenbeugung ermittelten Eigenspannungen in additiv gefertigten Bauteilen. Zusätzlich wird der Einfluss der Prozessparameter auf die Härte betrachtet.</abstract>
    <enrichment key="eventName">Frühjahrssitzung des Fachausschusses 13 Eigenspannungen der AWT</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">28.03.2023</enrichment>
    <enrichment key="eventEnd">29.03.2023</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Arne Kromm</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Eigenspannungen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>DED-arc</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Hochfester Stahl</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Neutronenbeugung</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>57546</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Hot Cracking Behavior of LTT Alloys under Variable Conditions in the Varestraint Test</title>
    <abstract language="eng">The use of Low Transformation Temperature (LTT) filler materials is an innovative way to reduce welding residual stresses. The generation of compressive residual stresses in the weld and heat-affected zone can lead to an improvement of the fatigue life of high-strength welds. However, high-alloy filler metals can be prone to solidification cracking. Two important LTT alloys were evaluated under variable welding and loading parameters using the Modified Varestraint/Transvarestraint (MVT) test. Initially conflicting results were interpreted using a newly developed image-based crack detection routine [1]. Based on the melt pool dimensions, the shape of the isotherms is reconstructed, and the theoretical crack growth along numerically determined crystallization paths is considered in relation to the cracks observed. Decreasing welding speeds with simultaneously higher heat input promote crack formation with increasing strain rate.</abstract>
    <enrichment key="eventName">International Joint Conference EMPOrIA 2023</enrichment>
    <enrichment key="eventPlace">Aachen, Germany</enrichment>
    <enrichment key="eventStart">16.05.2023</enrichment>
    <enrichment key="eventEnd">17.05.2023</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Arne Kromm</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>LTT</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Solidification cracking</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Varestraint test</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>63124</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Experimental determination of hydrogen diffusion in high-strength submerged arc welded joints by electrochemical permeation</title>
    <abstract language="eng">High-strength structural steels are increasingly used in modern steel construction for economic and design reasons, e.g., in building, plant or mobile crane construction. By using steels with higher yield strengths (≥690 MPa), significant weight reductions and lower processing costs can be achieved by reducing the wall thickness. For example, substituting S235J2 with S960QL can reduce weight by up to 78%. Current efforts in lightweight design result from the goal of reducing greenhouse gas emissions by up to 65% by 2030 compared to 1990. These demands mean a significant reduction in process emissions in industry by increasing the efficiency of energy and raw materials. Submerged arc welding (SAW) offers high deposition rates and the welding of sheet thicknesses of up to 200 mm. Due to their special microstructure to achieve strength, high strength steels have reduced ductility and are susceptible to hydrogen-assisted cold cracking (HACC), which can also form with delay. In addition, large plate thicknesses lead to high residual welding stresses and long diffusion paths for hydrogen introduced via the welding process, for example. Furthermore, H-diffusion coefficients for submerged arc multi-layer weld metal are very limited as a basis for estimating the time interval of a possible delayed cold cracking (thus HACC) or for post-heating procedures for hydrogen reduction (no HACC). Reliable H-diffusion coefficients are therefore an adequate tool for assessing the risk of delayed HACC. This study characterizes the hydrogen diffusion behavior in submerged arc multi-pass weld metal, heat-affected zone and base metal of a two different S690 steels (TM and QT condition). Samples were extracted from the weld metal, heat-affected zone and base material to investigate the microstructure-specific influence on the diffusion of hydrogen. Using electrochemical permeation at room temperature and carrier gas hot extraction in the temperature range up to 400 °C, the corresponding diffusion coefficients were determined. From the experimental data, hydrogen diffusion coefficients and absorbed hydrogen concentrations had been calculated. In contrast e.g. to GMA welds, the hydrogen diffusion coefficients did not exhibit significant differences in the two base materials (TM and QT) or the heat-affected zone or weld metal, although quite different welding heat inputs were investigated. From the practical viewpoint, thick-walled SAW joints can be assessed for delayed hydrogen diffusion only by the base material coefficients. The calculated diffusion coefficients will be further used for numerical modelling of the hydrogen diffusion in welded joints.</abstract>
    <enrichment key="eventName">IIW Intermediate Meeting 2025</enrichment>
    <enrichment key="eventPlace">Trollhätten, Sweden</enrichment>
    <enrichment key="eventStart">10.03.2025</enrichment>
    <enrichment key="eventEnd">12.03.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Denis Czeskleba</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen Cracking</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Submerged Arc Welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen Diffusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Cold Cracking</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>62941</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Assessment of in-service welding conditions for pressurized hydrogen pipelines via component test</title>
    <abstract language="eng">Hydrogen is the energy carrier of tomorrow for a fossil-free future. This requires a reliable transport infrastructure capable of transporting large quantities of hydrogen. In addition to the construction of new pipelines, the conversion of existing natural gas (NG) networks is an essential part of global hydrogen strategies. The transport of hydrogen is fundamentally different from that of NG, as hydrogen can be absorbed into the pipeline material. Given the known effects of hydrogen embrittlement, the compatibility of the materials for the proposed pipelines (typically low alloy steels in a wide range of strengths and thicknesses) must be investigated. However, pipelines require frequent maintenance, repair, or the need to install additional outlets. In some cases, it is necessary to perform welding on or to the pipelines while they are in-service, i.e. with active gas flow under high pressure. This in-service welding poses challenges for hydrogen operations in terms of additional hydrogen absorption during welding and material compatibility. The challenge can be roughly divided into the possible austenitization of the inner pipe material exposed to hydrogen, which can lead to sufficient hydrogen absorption, and the welding itself, which causes an increased temperature range. Both lead to a significant increase in hydrogen solubility of the respective materials compared to room temperature. In this context, knowledge about welding on hydrogen pipelines is scarce due to the lack of operational experience. Fundamental experimental investigations are required to investigate the transferability from natural gas to hydrogen pipeline networks. For this reason, the present study presents a specially designed demonstrator concept for the realistic assessment of the welding process conditions. The demonstrator was designed ex-post sample extraction for quantification of the absorbed hydrogen concentration. For safety reasons, the required volume of pressurized hydrogen was limited by inserting a solid cylinder. Welding experiments on the DN50 and DN200 pressurized demonstrators showed  an increased hydrogen uptake in the welded area of several ppm.</abstract>
    <enrichment key="eventName">Materials Week/Steel Innovation</enrichment>
    <enrichment key="eventPlace">Frankfurt am Main, Germany</enrichment>
    <enrichment key="eventStart">02.04.2025</enrichment>
    <enrichment key="eventEnd">04.04.2025</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Kjell Erxleben</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>In-service</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Pipeline</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Repair welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Component test</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>63041</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>15</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Springer</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Effect of heat control on mechanical properties and residual stresses at the transition zone of component and substrate in hybrid DED‑arc manufacturing</title>
    <abstract language="eng">In hybrid additive manufacturing, components or semi-finished products manufactured by conventional primary forming are enhanced or modified by additive manufactured structures. However, systematic investigations focusing on the critical transition area between the specific properties of the substrate (like high-strength) and the additively manufactured component, made of specific filler material, are still lacking. The focus of the present study was to determine the influence of heat control on the Δt8/5 cooling time, the distortion, the mechanical properties, and the residual stresses in the transition area of hybrid-additive components. This contributed to the knowledge regarding the safe avoidance of cold cracking, excessive distortion, a reduction in yield stress, and the implementation of hybrid DED-arc manufacturing. The heat control was varied by means of heat input and working temperature such that the Δt8/5 cooling times corresponded to the recommended processing range. The heat input has a greater influence on the cooling time in the transition area than the working temperature. Working temperature and the total energy applied per layer have a significant effect on component distortion. The lowest working temperature of 100 °C in combination with the highest total energy per layer leads to significantly greater distortion compared to manufacturing with a high working temperature of 300 °C and low total energy per layer. In addition, the longitudinal residual compressive stresses in the sensitive transition area are reduced from − 500 MPa to approx. − 200 MPa by adjusting the working temperature from 100 to 300 °C. Such complex interactions must be clarified comprehensively to provide users with easily applicable processing recommendations and standard specifications for an economical hybrid additive manufacturing of components made, for example, of high-strength steels in the transition area.</abstract>
    <parentTitle language="eng">Welding in the World</parentTitle>
    <identifier type="issn">1878-6669</identifier>
    <identifier type="doi">10.1007/s40194-025-02036-z</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-630415</identifier>
    <enrichment key="eventName">IIW Annual Assembly and International Conference</enrichment>
    <enrichment key="eventPlace">Rhodes Island, Greece</enrichment>
    <enrichment key="eventStart">07.07.2024</enrichment>
    <enrichment key="eventEnd">12.07.2024</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">07.05.2025</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>R. Scharf-Wildenhain</author>
    <author>Lorenz Engelking</author>
    <author>A. Hälsig</author>
    <author>Dirk Schröpfer</author>
    <author>Thomas Kannengießer</author>
    <author>J. Hensel</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hybrid additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DED-arc</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Heat control</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High-strength metals</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/63041/Scharf-Wildenhain_Engelking_Effect of heat control.pdf</file>
  </doc>
  <doc>
    <id>64337</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Ti and Nb microalloying of HSLA steels and its effect on hydrogen diffusion and trapping</title>
    <abstract language="eng">Fine-grain, high-strength, low-alloy (HSLA) structural steels with yield strengths &gt; 600 MPa are now the state of the art in construction applications such as mobile cranes and civil engineering. HSLA grades derive their strength from a combination of specific heat treatment and the underlying chemical composition. In this context, Ti or Nb are essential to obtain a fine-grained microstructure as well as the necessary carbides or nitrides for precipitation strengthening. In this context, the specific effect of Ti or Nb-rich compounds on hydrogen trapping and diffusion is well known for special laboratory cast alloys, but unknown for realistic steel compositions. For this reason, a series of S690Q-based alloys were synthesized, close to a real steel composition, but with well controlled Ti or Nb additions in different amounts. Specimens were obtained from these alloys by electrochemical discharge machining (EDM). The specimens were tested using the well-established electrochemical permeation technique. From the experimental results, the hydrogen diffusion coefficients and the analytical subsurface hydrogen concentration were calculated. In addition, the hydrogen trapping behavior at elevated temperatures was interpreted by thermal desorption analysis (TDA) using different heating rates of hydrogen charged samples. The results showed that in contrast to metallurgically "pure" laboratory  cast alloys, realistic chemical compositions were similar in their hydrogen trapping behavior, despite some small differences. All investigated steel grades exhibited shallow and reversible hydrogen trapping, regardless of their chemical composition. Of course, the experiments only allowed the calculation of effective diffusion coefficients and trapping energies, which represent an average of the entire microstructure. Nevertheless, HSLA steels are typically joined by arc welding, which includes the risk of delayed hydrogen assisted cracking. From the point of view of welding practice, however, a more or less identical hydrogen diffusion behavior means that no special "metallurgically specific", justifiable measures need to be considered, despite the well-established processes such as "soaking" or dehydrogenation heat treatment.</abstract>
    <enrichment key="eventName">MPAC 2025</enrichment>
    <enrichment key="eventPlace">Stuttgart, Germany</enrichment>
    <enrichment key="eventStart">06.10.2025</enrichment>
    <enrichment key="eventEnd">08.10.2025</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Michael Rhode</author>
    <author>Niloufar Masoud Nia</author>
    <author>Jonathen Nietzke</author>
    <author>Thomas Kannengiesser</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>HACC</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>HSLA</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>64347</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Stress-Optimised Welding Repair for High-Strength Offshore Steel Joints</title>
    <abstract language="eng">The successful energy transition in Germany will require offshore wind turbines with outputs &gt;10 MW in the future. To achieve these high outputs, turbines far from the coast are required, featuring large subsea jacket structures (30 m up to 50 m) and tall towers (up to 200 m). High-strength steels with a yield strengths up to 500 MPa and wall thicknesses of up to 120 mm are increasingly being used for these structures. During manufacture, weld defects detected by non-destructive testing (NDT) require localized repair (gouging and rewelding). To date, there is a lack of repair concepts and information in standards and guidelines. Therefore, BAM initiated the FOSTA project P1629 (IGF 01IF22746N) to investigate the stress-optimized repair (local gouging and welding) of high-strength thick plate joints made of offshore grades in the yield strength range off 355 to 460 MPa and similar weld metal. This research aims to develop a stress-optimized repair concept for thick plate joints, using controlled high-performance GMAW processes and optimized, narrow gouging grooves. Thermal and mechanical gouging are performed, allowing the groove configuration to be modified. Modern welding processes provide deep root penetration and focused energy input capable of welding narrow seams. The aimed residual stress reduction can be attributed to the lower input of weld metal due to the changes in groove configuration and to the reduction in heat input per layer due to the controlled arc process. The experimental analyses take into account the interaction of process, material, and design-related influences on the formation of weld induced stresses. Concluding with recommendations for guidelines elaborated for steel-processing SMEs.</abstract>
    <enrichment key="eventName">MPA Stuttgart 2025</enrichment>
    <enrichment key="eventPlace">Stuttgart, Germany</enrichment>
    <enrichment key="eventStart">06.10.2025</enrichment>
    <enrichment key="eventEnd">08.10.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Levin Reichel</author>
    <author>Dirk Schroepfer</author>
    <author>Arne Kromm</author>
    <author>Thomas Kannengiesser</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Repair welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High-strength steels</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Gouging</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Modern welding processes</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>64355</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>17</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Springer Nature</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Effect of Ti microalloying on the local strain behavior of cross-weld tensile samples determined by digital image correlation</title>
    <abstract language="eng">High-strength low-alloyed (HSLA) steels with yield strength / proof stress ≥ 600 MPa are the basis of modern light-weight steel constructions. Indeed, the economic and ecological benefits strongly depend on their processability in terms of welding. In this context, the use of highly productive welding processes and suitable welding consumables is of vital interest and requires a fundamental understanding of the microstructural changes in the HSLA steel and especially the heat-affected zone (HAZ) of the welded joint. Microalloying elements, such as Ti or Nb, are essential to achieve the desired mechanical properties. To analyse the weldability, three-layer welds were performed using gas metal arc welding (GMAW) and critical microstructures, such as areas of the HAZ that exhibit significant softening or hardening, were identified. The effect of the softened HAZ region on failure was evaluated using cross-weld tensile specimens. Digital image correlation (DIC) was used for in-situ monitoring of the development and accumulation of the local strains in different HAZ regions during tensile testing. Using a specially designed mirror system, the local strains of the microstructure zones on the top and bottom of the weld were recorded simultaneously. In addition, the analysis of the local deformation helps to understand the effects of the softened HAZ on the global strain, the reduction in area, the fracture position, and the overall fracture behavior.</abstract>
    <parentTitle language="eng">Welding in the World</parentTitle>
    <identifier type="doi">10.1007/s40194-025-02185-1</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-643558</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">20.10.2025</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Nina Schröder</author>
    <author>Michael Rhode</author>
    <author>Thomas Kannengießer</author>
    <author>Arne Kromm</author>
    <author>Daniel Kadoke</author>
    <author>Julius Kruse</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High-strength structural steel</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microalloying influences</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>HAZ-softening</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Digital Image Correlation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Constraint effect</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Thermodynamic simulation</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.1 Sensorik, mess- und prüftechnische Verfahren</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/64355/s40194-025-02185-1.pdf</file>
  </doc>
  <doc>
    <id>64317</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Component test for simulation of in-service welding on hydrogen pipelines</title>
    <abstract language="eng">Hydrogen is set as the energy carrier of tomorrow and most countries will achieve large-scale hydrogen transport through the conversion of the natural gas (NG) grid and the construction of new pipelines. The interaction between hydrogen and the pipeline materials differs fundamentally from that of NG, as hydrogen is readily absorbed into the material. Considering the possible hydrogen embrittlement (HE), the compatibility of the pipeline materials (low-alloyed steels with a wide strength/thickness range) must be investigated. However, pipelines require intervention for maintenance, repair, or grid expansion with welding on/onto the pipelines while in service, i.e. the well-known "hot tapping" and "stoppling". The challenges compared to NG can be broadly divided into the possible austenitization of the inner pipe material exposed to hydrogen and the welding itself. Both result in a significant increase in hydrogen solubility and could potentially pose challenges in terms of HE. Emphasis is placed on the word "could" because knowledge of "hot tapping" on hydrogen pipelines is scarce due a lack of service experience. To this end, this study proposes a concept for a component-like demonstrator with the objectives: (1) safe feasibility of "hot tapping" on pressurized model hydrogen pipeline sections, (2) facilitate ex-post sample extraction for the purpose of quantifying the absorbed hydrogen concentrations, and (3) ensure in-situ temperature measurement during welding to monitor the pipeline surface temperature. For safety reasons in the event of an unintentional "burn-through", a solid cylinder was inserted in the demonstrator to restrict the hydrogen gas volume to a small, pressurized layer. Reference pipeline surface temperature measurements were ensured on comparable, unpressurized geometries. The investigated range of welding conditions was investigated for representative material/thickness combinations (DN60 to DN300), suggesting the feasibility of the demonstrator for the determination of reliable in-service welding conditions for both installed and new pipelines for hydrogen service.</abstract>
    <enrichment key="eventName">49th MPA Conference</enrichment>
    <enrichment key="eventPlace">Stuttgart, Germany</enrichment>
    <enrichment key="eventStart">06.10.2025</enrichment>
    <enrichment key="eventEnd">08.10.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Pipeline</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>In-service welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Component test</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>64451</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">In situ Measurement of Hydrogen in Steel using Laser-induced Breakdown Spectroscopy (LIBS)</title>
    <abstract language="eng">Laser-induced breakdown spectroscopy (LIBS) is an analysis technique that allows contactless and fast in situ measurements of hydrogen in welded steels. The surface does not need necessarily be prepared as the laser can ablate material before the measurement. Depth profiling, point measurements as well as scanning of areas (mapping) can be utilized and automated. The method can be used for quantitative measurements, which requires a calibration with standards of similar material containing known hydrogen concentrations. LIBS is a candidate for ISO 3690, determination of diffusible hydrogen in martensitic, bainitic, and ferritic steel weld metal using arc welding processes with filler material. The capability of the method is shown in a hydrogen diffusion experiment.</abstract>
    <enrichment key="eventName">Tagung Steel &amp; Hydrogen 2025</enrichment>
    <enrichment key="eventPlace">Genth, Belgium</enrichment>
    <enrichment key="eventStart">14.10.2025</enrichment>
    <enrichment key="eventEnd">16.10.2025</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Axel Griesche</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>LIBS</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen measurement</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser spectroscopy</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Steel</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>64887</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Reduction of residual stress by narrowing the repair groove: Optimising repair welding with modern welding processes for high strength offshore steels</title>
    <abstract language="eng">The ongoing German energy transition will require offshore wind turbines with outputs of &gt;10 MW in the future. Turbines with these high outputs must be located far from the coast, with up to 50 m large subsea jacket structures and tall towers. These structures are increasingly fabricated of high-strength steels with a yield strength up to 500 MPa and wall thicknesses of up to 120 mm. During production, weld defects identified through non-destructive testing (NDT) must be locally repaired by gouging and rewelding. Standards and guidelines lack sufficient concepts and information regarding such repair procedures. To address this gap, BAM launched the FOSTA project P1629 (IGF 01IF22746N) to explore stress-optimised repair concepts, specifically local gouging and welding, for high-strength thick plate joints made from offshore-grade steels with yield strengths between 355 MPa and 460 MPa, including matching weld metals. This research aims to develop a stress-optimised repair concept for thick plate joints, utilising controlled high-performance GMAW techniques and narrow gouging grooves. Both thermal and mechanical gouging methods are applied, enabling adjustments to the groove geometry. Modern welding processes offer deep root penetration and concentrated energy input, making them suitable for narrow seams. The intended reduction in residual stress results from the decreased weld metal volume, due to modified groove shapes and the lower heat input per layer achieved through controlled arc processes. Experimental investigations examine how process parameters, material properties, and design factors interact to influence the development of welding-induced stresses. The project concludes with practical recommendations for guidelines tailored to steel-processing SMEs.</abstract>
    <enrichment key="eventName">4th International Conference on Advanced Joining Processes (AJP 2025)</enrichment>
    <enrichment key="eventPlace">Coimbra, Portugal</enrichment>
    <enrichment key="eventStart">16.10.2025</enrichment>
    <enrichment key="eventEnd">17.10.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Levin Reichel</author>
    <author>Dirk Schroepfer</author>
    <author>Arne Kromm</author>
    <author>Thomas Kannengiesser</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Repair welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Modern welding processes</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High-strength offshore steel</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Narrow groove</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65051</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of Ultrasonic-Assisted Milling on Surface Integrity of Additively Manufactured Components Using DED-Arc/GMAW</title>
    <abstract language="eng">Additive manufacturing (AM) is increasingly used for producing complex metallic com-ponents. Subsequent machining is essential to achieve final geometries and surface conditions. The resulting surface integrity, particularly the near-surface residual stress state, plays a crucial role in component performance and fatigue life. This study inves-tigates the potential of ultrasonic-assisted milling (USAM), a hybrid machining process, to improve surface integrity and machinability compared to conventional milling (CM). Three materials were investigated, two difficult-to-cut materials CoCr26Ni9Mo5W and FeNi36 and a low-alloy steel S355J2C. The CoCr26Ni9Mo5W and FeNi36 were addi-tively manufactured via DED-Arc and then machined with varying cutting speeds and feed rates within a Design of Experiments. USAM exhibited enhanced machinability and surface integrity, particularly at low cutting speeds, by reducing cutting forces up to 40% and shifting near-surface residual stresses from tensile to compressive. For S355J2C, USAM reduced cutting forces by approximately 45% and induced surface-near compressive residual stresses up to approximately -700 MPa, leading to a 11% higher fatigue strength compared to CM. These findings highlight the advantages of ultrasonic assistance in post-AM machining, offering enhanced fatigue performance and surface quality for various metallic materials.</abstract>
    <enrichment key="eventName">4th International Conference on Advanced Joining Processes 2025</enrichment>
    <enrichment key="eventPlace">Coimbra, Portugal</enrichment>
    <enrichment key="eventStart">16.10.2025</enrichment>
    <enrichment key="eventEnd">17.10.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Dirk Schröpfer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Ultrasonic-assisted milling</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Surface integrity</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fatigue strength</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65048</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of Substrate Design on Properties and Residual Stresses in Hybrid AM/DED-Arc of High-Strength Steels</title>
    <abstract language="eng">High-strength, fine-grained structural steels are increasingly used in modern steel construction to meet economic and environmental demands through lightweight design and reduced material usage. Additive manufacturing (AM), in particularly direct energy deposition with gas metal arc welding (DED-Arc), offers significant advantages in flex-ibility, production speed, and cost efficiency. In hybrid AM, conventionally manufac-tured parts are extended or modified using AM processes. Welding-induced residual stresses, especially in the transition area, pose challenges to structural integrity. This study investigates the influence of substrate design and thermal pretreatment on the residual stress state of hybrid AM components made from base material steel S690QL and a welding filler, a modified solid wire G79. Two substrate geometries (I- and T-substrate) are analysed, which are additively and conventionally manufactured, re-spectively. Results show that substrate geometry significantly affects local residual stresses, microstructure and hardness, particularly in the transition are. The findings contribute to a better understanding of the evolution of welding stresses in hybrid AM components to achieve reliable, crack-resistant and economic high-strength steel structures.</abstract>
    <enrichment key="eventName">4th International Conference on Advanced Joining Processes 2025</enrichment>
    <enrichment key="eventPlace">Coimbra, Portugal</enrichment>
    <enrichment key="eventStart">16.10.2025</enrichment>
    <enrichment key="eventEnd">17.10.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Dirk Schröpfer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DED-Arc</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hybrid additive manufacturing</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65046</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of build-up height on residual stresses in additive repair and modification of multi-material composites using DED-Arc</title>
    <abstract language="eng">The application of steels with a higher yield strength allows reductions in wall thickness, component weight and production costs. Hybrid additive manufacturing based on Gas Metal Arc Welding (GMAW) processes (DED-Arc) can be used to realise highly effi-cient component modifications and repairs on semi-finished products and additively manufactured structures. There are still a number of key issues preventing widespread implementation, particularly for SMEs. In addition to the manufacturing design, detailed information about assembly strategy and geometric adaptation of the component for modifications or repairs are missing. These include the welding-related stresses associ-ated with the microstructural influences caused by the additive manufacturing steps, particularly in the transition area of the substrate and filler material interface. The present research focuses the effect of component height on residual stress distribution. Defined specimens were welded fully automatically with a high-strength solid wire (yield strength &gt; 790 MPa) especially adapted for DED-Arc on S690QL substrate.</abstract>
    <enrichment key="eventName">IIW intermediate meeting for commission IX</enrichment>
    <enrichment key="eventPlace">Trollhätten, Sweden</enrichment>
    <enrichment key="eventStart">12.03.2025</enrichment>
    <enrichment key="eventEnd">14.03.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>R. Scharf-Wildenhain</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DED-Arc</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Component height</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65090</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Improvement of Fatigue Resistance through the Application of a Low-Transformation-Temperature Welding Consumable</title>
    <abstract language="eng">Low transformation temperature (LTT) welding consumables are an innovative approach to reduce tensile residual stress in weld seams and the surrounding heat affected zone (HAZ). The reduced tensile stress can lead to an improvement in fatigue strength of welded components. LTT alloys are characterized by a chemical composition which reduce the martensite start temperature (Ms) close to room temperature. This article focuses on a hybrid use of LTT filler metals, where the LTT filler is applied as an additional layer to conventional welds on fatigue-critical spots. Conventional gas metal arc welded longitudinal stiffeners are used as specimens. At the face ends of the stiffeners, a second LTT layer was added with various modifications in weld shapes. These different shapes were achieved by changing the welding parameters such as welding speed and offset to the first layer. These samples were used to analyze shape, dilution, resulting Ms, residual stress and fatigue strength. The dilatometer verified Ms and dilution did not change significant, although the area of the 2nd LTT weld seam was varying clear with each modification. However, the weld modification had a significant effect on the residual stress state and the fatigue strength. The X-ray determined residual stress in the HAZ became lower when the weld toe of the LTT layer was further away from the stiffener. All samples with LTT weld exhibit significantly higher fatigue strength values than conventionally single and double-layer welded samples. The lower the residual stress at weld toe, the higher the fatigue strength. The results show that on the one hand LTT filler metals increase the fatigue strength, and on the other hand the impact of LTT fillers materials is not restricted to the dilution and Ms, the shape of the weld seam must also be considered.</abstract>
    <enrichment key="eventName">4th international Conference on Advanced Joining Processes AJP</enrichment>
    <enrichment key="eventPlace">Combria, Portugal</enrichment>
    <enrichment key="eventStart">16.10.2025</enrichment>
    <enrichment key="eventEnd">17.10.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Martin Hübner</author>
    <author>Florian Dittmann</author>
    <author>Arne Kromm</author>
    <author>Igor Varfolomeev</author>
    <author>Thomas Kannengiesser</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Low transformation temperature (LTT)</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress reduction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fatigue strength</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Longitudenal stiffener</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65089</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Bericht zum Fortschritt des laufenden Projekts: "Hybrider Einsatz von LTT-Schweißzusätzen zur Schwingfestigkeitsverbesserung hochfester Stahlbauteile"</title>
    <abstract language="deu">Low Transformation Temperature (LTT) Schweißzusätze erzeugen während der Abkühlung Druckeigenspannungen in die Schweißnaht und Wärmeeinflusszone durch eine Volumenexpansion, wodurch die Ermüdungsfestigkeit erhöht werden kann.  Um das Potential dieser neuartigen Schweißzusätze besser zu quantifizieren, wurden konventionelle Längssteifen als Probenkörper verwendet, welche an den Stirnseiten mit einer LTT-Zusatznaht geschweißt wurden. Durch Variation der Schweißparameter konnten unterschiedliche Nahtformen realisiert werden. Es konnte, je nach Nahtausführung, eine Erhöhung der Ermüdungsfestigkeit bei 2 Millionen Lastwechseln von 140% festgestellt werden. Somit sind LTT-Zusätze grundsätzlich geeignet, um die Ermüdungsfestigkeit zu erhöhen. Weiterhin wurde festgestellt, dass das Reparaturschweißen mit LTT Schweißzusätzen als Decklage ebenfalls zu einem deutlichen Ermüdungsfestigkeitsanstieg führte.</abstract>
    <enrichment key="eventName">Sitzung des DVS Fachausschuss FA09 - Konstruktion und Festigkeit</enrichment>
    <enrichment key="eventPlace">Düsseldorf, Germany</enrichment>
    <enrichment key="eventStart">10.12.2025</enrichment>
    <enrichment key="eventEnd">10.12.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Martin Hübner</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Low transformation temperature (LTT)</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Eigenspannungen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Ermüdungsfestigkeit</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>hochfeste Stähle</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Mikroproben</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>57168</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Die Hohlzugprobentechnik - Eine neue Methodik zur Untersuchung der Materialverträglichkeit unter Wasserstoffeinfluss</title>
    <abstract language="deu">Die schädigende Wirkung von Wasserstoff auf die mechanischen Eigenschaften von Stählen ist zwar bekannt, aber noch immer nicht ausreichend erforscht. Die schnelle und sichere Markteinführung von Wasserstofftechnologien macht es erforderlich, dieses Thema genauer zu untersuchen. Im Allgemeinen wird dies oft als Wasserstoffversprödung bezeichnet. Daher ist es wünschenswert, eine Prüfmethode zu entwickeln, die auf einfache Weise die Materialeigenschaften unter Wasserstoffatmosphäre ermitteln kann. Derzeit werden mechanische Prüfungen unter Wasserstoffatmosphäre in Autoklaven durchgeführt. Für diese Technik ist eine aufwendige Hardware erforderlich, daher sind die Prüfungen teuer und die Prüfkapazitäten nur in geringem Umfang verfügbar. Die hier vorgestellte Prüfmethode verspricht einen zukunftsweisenden Ansatz zur Reduzierung von Kosten und Bearbeitungszeiten durch die Verwendung von Hohlkörpern, d.h. die Probe selbst stellt den Autoklav dar.</abstract>
    <enrichment key="eventName">Sitzung des DIN-Gemeinschaftsarbeitsausschusses NA 092 00 05 GA, NAS/NMP: Zerstörende Prüfung von Schweißverbindungen</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">15.03.2023</enrichment>
    <enrichment key="eventEnd">15.03.2023</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Arne Kromm</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Prüfung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Probengeometrie</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Hochdruck</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.0 Abteilungsleitung und andere</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>65238</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Reparaturschweißen in der schweißtechnischen Montage: Moderne Schweißverfahren für hochfeste Offshore-Stähle</title>
    <abstract language="deu">Der Ausbau der Offshore-Windenergie mit Anlagenleistungen von über 10 MW er-fordert zunehmend den Einsatz hochfester Stähle mit Streckgrenzen ab 460 MPa bei Wanddicken von bis zu 150 mm. Inakzeptable Defekte, die während bzw. nach der schweißtechnischen Montage solcher dickwandigen Verbindungen im Nahtbereich detektiert werden, können wirtschaftlich durch lokales Ausfugen und anschließendes Schweißen noch in der Fertigung repariert werden. Insbesondere bei hochfesten Baustählen stellt dies hohe Anforderungen an die schweißtechnische Fertigung, da bislang keine standardisierten Reparaturkonzepte oder normativen Vorgaben existie-ren. Praxisnahe Empfehlungen sind hier vor allem für kleine und mittlere Unterneh-men (KMU) notwendig, damit diese Reparaturschweißungen sicher und wirtschaft-lich durchführen können.&#13;
Die laufende Untersuchung (FOSTA P1629/IGF 01IF22746N) legt daher den Schwerpunkt auf die Optimierung der Reparaturverfahren mit dem Ziel, schweißbe-dingte Beanspruchungen zu reduzieren, weil diese häufig zu erneuten Bildung Fehl-stellen führen. Hierfür werden hochfeste, dickwandige Verbindungen aus Offshore-Stahlgüten im Streckgrenzenbereich von 355 MPa bis 460 MPa untersucht. Die ex-perimentellen Analysen berücksichtigen dabei die komplexen Wechselwirkungen zwischen werkstoff- und prozess- sowie konstruktionsbedingten Einflüssen auf den Beanspruchungszustand nach dem Schweißzyklus (Verbindungsschweißen, Ausfu-gen, Reparaturschweißen). Diese Faktoren, wie z. B. die Steifigkeitsverhältnisse der Schweißnaht, sind von entscheidender Bedeutung für die resultierenden Eigenspan-nungen, die sich infolge der schweißtechnischen Reparatur ausbildet. Um die Bau-teilsicherheit und Leistungsfähigkeit zu gewährleisten, sind insbesondere risskriti-sche, mehrachsige Eigenspannungszustände zu vermeiden. So lassen sich moderne Hochleistungs-MAG-Schweißprozesse mit hierfür optimierten, schmaleren Fugen-geometrien in bauteilbezogenen Schweißversuchen auf Großprüfanlagen untersu-chen, um hierfür angepasste Prozess- und Wärmeführungsparameter zu identifizie-ren und angepasste Reparaturkonzepte abzuleiten. Ziel ist es, Handlungsempfehlun-gen für Richtlinien und Normen zu erarbeiten, die das Potenzial hochfester Stähle voll ausschöpfen und die Anwendbarkeit im Offshore-Stahlbau, insbesondere für KMU, substanziell stärken. Auf diese Weise leistet das Projekt einen entscheiden-den Beitrag zur erfolgreichen Umsetzung der Energiewende in Deutschland.</abstract>
    <enrichment key="eventName">Forschungsseminar OVGU-Magdeburg</enrichment>
    <enrichment key="eventPlace">Magdeburg, Germany</enrichment>
    <enrichment key="eventStart">18.06.2025</enrichment>
    <enrichment key="eventEnd">18.06.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Levin Reichel</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Moderne Schweißprozesse</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Offshore</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reparaturschweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Thermisches Ausfugen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Eigenspannungen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Gefügedegradation</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65239</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Optimising repair welding: narrower groove design for modern welding processes on high-strength offshore steels</title>
    <abstract language="eng">The ongoing energy transition in Germany requires large offshore wind turbines with outputs over 10 MW and suitable deep-water subsea structures. Large towers made of high-strength steel with a yield strength of up to 500 MPa are needed to use the mate-rial more efficiently, enabling thinner wall sections without compromising structural integrity. This places high demands on manufacturers, especially regarding welding high-strength offshore steels. Weld defects detected through non-destructive testing (NDT) must be repaired by gouging and rewelding during fabrication. For thick plate joints, there is a notable lack of research, repair strategies, and guidance in standards and guidelines. Safe and cost-effective repairs are urgently necessary to support manufacturers, particularly SMEs. This study focuses on high-strength thick plate joints made of offshore grades with a yield strength of 355 to 460 MPa, repaired us-ing optimised narrow gouging grooves and controlled high-performance GMAW pro-cesses. Experimental analyses examine the complex interaction between the welding process, material properties, and design influences on the formation of weld-induced residual stresses in high-strength fine-grain structural steels. To ensure the safety and performance of components, it is essential to prevent repair welding-related material degradation and the development of crack-critical residual tensile stresses.&#13;
In this investigation, gouging was carried out using milling to ensure reproducibility. The restraint intensity of the groove significantly increases with a shorter groove length and a thicker substrate. The relaxation caused by the gouging process was ana-lysed using X-ray diffraction (XRD) to examine the initial conditions for the subse-quent repair welding. The residual stresses induced by the repair welding were ana-lysed, and different groove configurations have been compared. With shorter groove lengths and wider opening angles, the residual stresses after the repair weld increase markedly for this analysed offshore steel. The lowest residual stresses can be achieved by increasing the groove length and reducing the opening angle for a repair weld with a modern, controlled welding process. Adapting the repair process and boundary conditions allows for the full utilisation of the material's potential. This makes a valuable contribution to the energy transition in Germany, especially for SMEs in the steel processing industry.</abstract>
    <enrichment key="eventName">Forschungsseminar OVGU-Magdeburg</enrichment>
    <enrichment key="eventPlace">Magdeburg, Germany</enrichment>
    <enrichment key="eventStart">10.12.2025</enrichment>
    <enrichment key="eventEnd">10.12.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Levin Reichel</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Repair welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Narrow groove</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Controlled arc</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High-strength offshore steel</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>63236</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Mechanische Eigenschaften der Längschweißnaht einer X65-Pipeline in Druckwasserstoffatmosphäre</title>
    <abstract language="deu">Im folgenden Beitrag werden die Ergebnisse der mechanischen Eigenschaften unter 200 bar Druckwasserstoff des Werkstoffes 316L (1.4404) vorgestellt. Dazu wurden Hohlzugproben aus konventionellem, kaltgezogenem Material herausgearbeitet und per SLM-PBF additiv gefertigten Hohlzugproben gegenübergestellt. Die Proben wurden da-bei unter Druckwasserstoff einer SSRT-Prüfung mit einer Dehnrate von 1E-5/s unterzogen. Zusätzlich zum Werkstoffzustand wurde der Einfluss des Oberflächenzustandes charakterisiert: (1) additiv gefertigten Proben mit endkonturnaher Form „as-printed“ oh-ne zusätzliche Bohrung, (2) Bohren und (3) zusätzliches Honen. Die gemessene Degradation der mechanischen Eigenschaften unter Wasserstoff hing dabei in erster Linie von der Oberfläche ab und damit indirekt vom Werkstoffzustand „as-printed“ oder kaltgezogen ab. Während die Proben mit gebohrter und/oder gehonter Oberfläche eine RRA (Relative Reduction of Area) 78 % aufwiesen, zeigten die AM-Proben eine deutlich höhere RRA von 90 %. Ein möglicher Grund dafür sind während der Fertigung ausbildende Oxidschichten, die sich durch geringe Mengen an Restsauerstoff während des AM-Prozesses ausbilden. Zur abschließenden Charakterisierung sind weitere Untersuchungen erforderlich, insbesondere für ein größeres Parameterfeld an Prüftemperaturen (Oxideinwirkung) und Dehnraten (mechanische Beständigkeit der Oxidschicht ähnlich den Einflüssen auf „klassische“ Spannungsrisskorrosion).</abstract>
    <enrichment key="eventName">DGM Arbeitskreis Wasserstoff</enrichment>
    <enrichment key="eventPlace">Neu-Isenburg, Germany</enrichment>
    <enrichment key="eventStart">26.05.2025</enrichment>
    <enrichment key="eventEnd">27.05.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Pipeline</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Hohlzugprobe</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.1 Komponenten für Energieträger</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>65246</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>290</pageFirst>
    <pageLast>298</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>2026</volume>
    <type>bookpartcollection</type>
    <publisherName>DVS Media GmbH</publisherName>
    <publisherPlace>Düsseldorf</publisherPlace>
    <creatingCorporation>DVS - Deutscher Verband für Schweißen und verwandte Verfahren e. V.</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Herstellung beanspruchungsgerechter Oberflächen durch Kombination innovativer additiver und abtragender Fertigungsschritte an hochbelasteten Komponenten</title>
    <abstract language="deu">Die additive Fertigung mittels Schweißverfahren bietet große ökonomische Vorteile für eine ressourceneffiziente Bauteilherstellung. Offene Fragen bezüglich Homogenität, Anisotropie der Schweißgefüge und den damit verbundenen Bauteileigenschaften stehen einer wirtschaftlichen Verarbeitung oftmals im Wege. Finale Bauteilgeometrie und Oberflächengüte erfordern meist komplementäre subtraktive Fertigungsschritte. Werkstoffe für hochbelastbare Komponenten sind oftmals schwer span bar. In einem Vorhaben der BAM und des ISAF wurde untersucht, wie die Modifikation der AM-Schweißzusätze und das ultraschallunterstützte Fräsen (US) die Zerspanungssituation verbessern. Der vorliegende Artikel stellt wesentliche Zusammenhänge zwischen Legierung, Gefüge und Zerspanung zweier schwer spanbarer Hochleistungslegierungen (FeNi und CoCr) dar. Großes Potenzial zeigte neben dem US die Modifikation mit Zr und Hf bei Zulegierung in das Schweißgut mittels Beschichtung von Massivdrähten bzw. Herstellung von Fülldrähten.</abstract>
    <parentTitle language="deu">Jahrbuch Schweißtechnik 2026 - Ein Leitfaden durch die Branche der Füge-, Trenn- und Beschichtungstechnik</parentTitle>
    <identifier type="isbn">978-3-96144-304-8</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Loenz Engelking</author>
    <author>Dirk Schröpfer</author>
    <author>Thomas Kannengießer</author>
    <author>Antonia Eissel</author>
    <author>Kai Treutler</author>
    <author>Volker Wesling</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Additive Fertigung (AM)</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Ultraschallunterstütztes Fräsen (US)</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Werkstoffmodifikation</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Oberflächenintegrität</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Zerspanbarkeit schwer spanbarer Legierungen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Ressourceneffizienz in Prozessketten</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Hochleistungslegierungen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Technologietransfer für KMU</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="ddc" number="624">Ingenieurbau</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Infrastruktur</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <collection role="themenfelder" number="">Leichtbau</collection>
  </doc>
  <doc>
    <id>63239</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Additive gefertigte 316L-Hohlzugproben unter Druckwasserstoff  - Einfluss der Oberfläche und des Werkstoffzustandes</title>
    <abstract language="deu">Im folgenden Beitrag werden die Ergebnisse der mechanischen Eigenschaften unter 200 bar Druckwasserstoff des Werkstoffes 316L (1.4404) vorgestellt. Dazu wurden Hohlzugproben aus konventionellem, kaltgezogenem Material herausgearbeitet und per SLM-PBF additiv gefertigten Hohlzugproben gegenübergestellt. Die Proben wurden da-bei unter Druckwasserstoff einer SSRT-Prüfung mit einer Dehnrate von 1E-5/s unterzogen. Zusätzlich zum Werkstoffzustand wurde der Einfluss des Oberflächenzustandes charakterisiert: (1) additiv gefertigten Proben mit endkonturnaher Form „as-printed“ oh-ne zusätzliche Bohrung, (2) Bohren und (3) zusätzliches Honen. Die gemessene Degra-dation der mechanischen Eigenschaften unter Wasserstoff hing dabei in erster Linie von der Oberfläche ab und damit indirekt vom Werkstoffzustand „as-printed“ oder kaltgezogen ab. Während die Proben mit gebohrter und/oder gehonter Oberfläche eine RRA (Relative Reduction of Area) 78 % aufwiesen, zeigten die AM-Proben eine deutlich höhere RRA von 90 %. Ein möglicher Grund dafür sind während der Fertigung ausbildende Oxidschichten, die sich durch geringe Mengen an Restsauerstoff während des AM-Prozesses ausbilden. Zur abschließenden Charakterisierung sind weitere Untersuchungen erforderlich, insbesondere für ein größeres Parameterfeld an Prüftemperaturen (Oxideinwirkung) und Dehnraten (mechanische Beständigkeit der Oxidschicht ähnlich den Einflüssen auf „klassische“ Spannungsrisskorrosion).</abstract>
    <enrichment key="eventName">DGM Arbeitskreis Wasserstoff</enrichment>
    <enrichment key="eventPlace">Neu-Isenburg, Germany</enrichment>
    <enrichment key="eventStart">26.05.2025</enrichment>
    <enrichment key="eventEnd">27.05.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Additive Fertigung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Hohlzugprobe</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Austentitischer Stahl</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.1 Komponenten für Energieträger</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>65244</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Werkstoffsichere Dickblechschweißung und KI - Ressourceneffizienz für die Energiewende</title>
    <abstract language="deu">Die Energiewende erfordert sichere und beanspruchungsgerechte Schweißverbindungen für Windenergieanlagen, Wasserstoff-Pipelines und Speicher. Hochfeste Stähle ermöglichen leichtere Strukturen und reduzieren den Materialverbrauch, was zu einer ressourceneffizienten Fertigung mit geringeren CO₂-Emissionen führt. Das Projekt fokussiert auf KI-gestützte Fertigungs- und Reparaturstrategien, insbesondere beim Unterpulverschweißen, um fehlerfreie Verbindungen und Kaltrissvermeidung sicherzustellen. Ergänzend werden Prüf- und Bewertungskonzepte für die H₂-Readiness sowie Normungsgrundlagen entwickelt, um die Ergebnisse in Richtlinien und Regelwerke wie DIN, DVS und DVGW zu integrieren.</abstract>
    <enrichment key="eventName">Mitgliederversammlung 2025 der Forschungsvereinigung Stahlanwendung e. V.</enrichment>
    <enrichment key="eventPlace">Essen, Germany</enrichment>
    <enrichment key="eventStart">17.12.2025</enrichment>
    <enrichment key="eventEnd">17.12.2025</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Dirk Schröpfer</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Werkstoffsicherheit</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kaltrissvermeidung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>H₂-Readiness</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>KI-gestützte Fertigung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Prozessüberwachung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Normung und Regelwerke</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Ressourceneffizienz</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Prüf- und Bewertungskonzepte</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Hochfeste Stähle</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Schweißtechnische Reparatur</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.3 Schweißtechnische Fertigungsverfahren</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65452</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>14</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Springer Nature</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Enhancement of the fatigue strength by application of a low transformation temperature (LTT) welding consumable</title>
    <abstract language="eng">Low transformation temperature (LTT) welding consumables offer a possibility to enhance fatigue strength in welded components without post-treatment. By lowering the martensite start temperature (MS), the volume expansion during transformation near ambient temperature reduces welding related tensile residual stresses in fatigue-critical areas. To evaluate this effect, longitudinal stiffeners were used, a LTT and conventional filler serve as welding consumable, also high frequency mechanical impact (HFMI) treatment was carried out. Three single-pass and six additional-pass sample series were investigated on residual stress and fatigue strength. The additional welds were applied in fatigue crack critical areas with different weld shapes, achieved by varying welding parameters. Mechanical tests on reference samples evaluated the properties of the diluted LTT welds. Although reduced toughness was observed, no fatigue cracks occurred in LTT single-pass weld roots. The fatigue strength at two million cycles increased from 81 MPa to 121 MPa compared to conventional welds, while HFMI reached 146 MPa. With an additional LTT weld pass the results varied from 138 MPa to 196 MPa, depending to the shape and residual stress state. The results show that LTT fillers effectively enhance fatigue performance, and that weld geometry and parameter selection are as critical as the chemical composition for maximizing the LTT effect.</abstract>
    <parentTitle language="eng">Welding in the World</parentTitle>
    <identifier type="doi">10.1007/s40194-026-02356-8</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-654520</identifier>
    <enrichment key="eventPlace">Genua, Italy</enrichment>
    <enrichment key="eventStart">22.06.2025</enrichment>
    <enrichment key="eventEnd">27.06.2025</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">02.02.2026</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Martin Hübner</author>
    <author>Florian Dittmann</author>
    <author>Arne Kromm</author>
    <author>Igor Varfolomeev</author>
    <author>Thomas Kannengiesser</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Low transformation temperature (LTT)</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Martensite start temperature</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Longitudenal stiffener</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fatigue strength</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65452/Huebner_Enhancement of the fatigue strength with LTT 2026.pdf</file>
  </doc>
  <doc>
    <id>65523</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>18</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>SAGE</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Residual stress distribution of a large component manufactured by AM-DED-Arc from high-strength weld filler material X90</title>
    <abstract language="eng">Currently, DED-Arc manufactured components are not covered by design guidelines, and design factors such as residual stress factors are not defined for such components. This hinders industrial use, especially for components with a remaining surface waviness required by industry. For the first time the stress state of a high-strength, low-alloy, large-scale DED-Arc component was characterised in the as-built state and after cutting off the component from the  substrate plate. Complementary methods of residual stress analyses were applied to gain a holistic insight into the residual stress distributions of a thick-walled part. In the as-built state, direction-dependent and position-dependent tensile residual stresses were found for the component at the level of the yield strength of the part. The additive manufacturing strategy  continuous spiral deposition has no significant influence on the residual stresses in bead threshold area compared to the residual stresses of the remaining component. For this case, bead threshold is no structural imperfection. By removing the part from the substrate plate, the residual stresses are significantly redistributed. Tensile residual stresses are then present at a moderate level. Compressive residual stresses were determined in the volume of the deposited material. The general consideration of ‘‘high’’ tensile residual stresses in such thick-walled components is rather conservative. Therefore, design guidelines should take the manufacturing condition into account.</abstract>
    <parentTitle language="eng">Journal of Strain Analysis</parentTitle>
    <identifier type="doi">10.1177/03093247251406876</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-655239</identifier>
    <identifier type="issn">2041-3130</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">23.02.2026</enrichment>
    <licence>Creative Commons - CC BY-NC - Namensnennung - Nicht kommerziell 4.0 International</licence>
    <author>J. Dixneit</author>
    <author>J. Gibmeier</author>
    <author>Arne Kromm</author>
    <author>J. Schubnell</author>
    <author>F. Lang</author>
    <author>F. Loebich</author>
    <author>E.-R. Carl</author>
    <author>W. Ya</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AM-DED-Arc</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High strength steel</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65523/dixneit-et-al-2026-residual-stress-distributio.pdf</file>
  </doc>
  <doc>
    <id>65565</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>mul</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="mul">Bestimmung des Temperaturfeldes beim Schweißen im Betrieb an Wasserstoff-Ferngasleitungen</title>
    <abstract language="deu">Grüner Wasserstoff wird als zukünftiger Energieträger eine wichtige Rolle bei der Dekarbonisierung spielen. Sein großtechnischer Transport über große Entfernungen wird über ein Wasserstoff-Pipelinennetz erfolgen. Ein solches Netz erfordert regelmäßig Schweißarbeiten zu Reparatur-, Wartungs- oder Erweiterungszwecken. Im Erdgasnetz ist es gängige Praxis, Schweißarbeiten während des Betriebs auszuführen, da es technisch und wirtschaftlich äußerst schwierig ist, eine Pipeline außer Betrieb zu nehmen. Im Fall von Wasserstoffpipelines ist hierbei jedoch zu beachten, dass Wasserstoff in den Pipelinestahl absorbiert werden kann. Dies kann zu einer Beeinträchtigung der Materialeigenschaften oder sogar zum Versagen der Pipeline führen, da die bekannten Effekte der wasserstoffinduzierten Versprödung und der wasserstoffunterstützten Rissbildung auftreten können. Die Wasserstoffaufnahme ist dabei wesentlich von den beim Schweißen auftretenden erhöhten Temperaturen abhängig. Um genaue Kenntnisse der zu erwartenden Temperaturen zu erlangen, wurden Schweißversuche an Ersatzgeometrien durchgeführt und Temperaturverläufe an diesen gemessen.&#13;
Basierend auf den Temperaturmessungen sollen im weiteren Verlauf in Zusammenarbeit mit der TU Graz Temperaturfelder sowie die resultierende Wasserstoffaufnahme und -diffusion mittels FEM berechnet werden.</abstract>
    <enrichment key="eventName">Forschungsseminar OvGU-Magdeburg</enrichment>
    <enrichment key="eventPlace">Magdeburg, Germany</enrichment>
    <enrichment key="eventStart">18.02.2026</enrichment>
    <enrichment key="eventEnd">18.02.2026</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Sebastian Kaiser</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Pipeline</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Schweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>59975</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Processing and application properties of multiple principal element alloys (MPEA)</title>
    <abstract language="eng">The presentation gives an overview of BAM's activities on processing influences and application properties of MPEAs in the form of joined and machined high and medium entropy alloys (CoCrFeMnNi and CoCrNi). In the case of welding, the focus is on defect-free welded joints with sufficient mechanical properties. In the case of machining, the focus is on the possible influence on the surface quality of the materials through adequate milling parameters. In addition, the hydrogen absorption and diffusion properties as well as the electrochemical corrosion behavior are fundamentally examined.</abstract>
    <enrichment key="eventName">FAU-Department Werkstoffwissenschaften, Seminar: Aktuelle Probleme der Werkstoffwissenschaften</enrichment>
    <enrichment key="eventPlace">Erlangen, Germany</enrichment>
    <enrichment key="eventStart">25.04.2024</enrichment>
    <enrichment key="eventEnd">25.04.2024</enrichment>
    <enrichment key="InvitedTalks">1</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Application properties</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Machining</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High-entropy alloy</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">6 Materialchemie</collection>
    <collection role="institutes" number="">6.2 Material- und Oberflächentechnologien</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="themenfelder" number="">Chemie und Prozesstechnik</collection>
    <collection role="themenfelder" number="">Chemische Charakterisierung und Spurenanalytik</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.0 Abteilungsleitung und andere</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
    <collection role="themenfelder" number="">Materialdesign</collection>
  </doc>
  <doc>
    <id>61268</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">In situ bragg edge imaging with neutrons for crystallographic phase and temperature field mapping during tig welding</title>
    <abstract language="eng">In Neutron-Bragg-Edge Imaging (NBEI) experiments, we studied the phase transition during butt-welding of martensitic Low Temperature Transformation (LTT) Steel [1]. Tungsten inert gas (TIG) welding was used with a moveable torch allowing for automated weldments. The austenitization in the heat affected zone (HAZ) underneath the welding head could be clearly visualized at λ = 0.39 nm, a wavelength smaller than the Bragg edge wavelengths of both austenite and martensite. Also, the re-transformation upon cooling from austenite into martensitic phase was detected. However, we observed an unexpected additional change in transmission at λ = 0.44 nm that is a wavelength larger than the wavelength of the Bragg edges of both the martensitic and austenitic phases. We attribute this change to the Deybe-Waller-Factor that describes the temperature dependence of coherent scattering at a crystal lattice [2]. The observed two-dimensional attenuation map corresponds well with a temperature distribution modelling by software macros in ANSYS [3]. Here, the absolute temperature values could be achieved by calibrating the modelled attenuation with help of a thermocouple placed at the steel sample plate. This allows in return for a direct two-dimensional temperature reading based on the Debye-Waller-relation between neutron attenuation and sample temperature.</abstract>
    <enrichment key="eventName">MSE 2024</enrichment>
    <enrichment key="eventPlace">Darmstadt, Germany</enrichment>
    <enrichment key="eventStart">24.09.2024</enrichment>
    <enrichment key="eventEnd">26.09.2024</enrichment>
    <enrichment key="InvitedTalks">1</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Axel Griesche</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>In situ neutron Bragg edge imaging</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Temperature field mapping</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Crystallographic phase mapping</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>TIG welding</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Kerntechnische Entsorgung</collection>
    <collection role="institutes" number="">9.0 Abteilungsleitung und andere</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>55716</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Quantification of hydrogen in metals applying neutron imaging techniques</title>
    <abstract language="eng">Hydrogen interaction with metals is well known to have severe detrimental effects on their mechanical properties. The use of modern high-strength steels, which are attractive to improve fuel economy by reducing weight as well as candidates for H storage cylinders and other components, is currently being severely limited by the fact that the presence of H can cause embrittlement of the material. In addition to steel, several other metals and alloys used in the nuclear industry, like Ti and Zr, are susceptible to H degradation through hydride formation and subsequent cracking.&#13;
&#13;
Microstructure-specific H mapping has been recognized as the most important challenge on the pathway towards a better understanding of the nature of H embrittlement in metallic alloys as well as the development of H storage solutions based on metal hydrides. Unfortunately, the characterization of H interactions with metals is an extremely challenging task and neutron-based techniques are of exceptional importance in this matter because – contrary to X-rays and electrons – thermal and cold neutrons interact strongly with the H nuclei, while the neutron beam is only weakly attenuated by the relevant metallic materials. Therefore, hydrogen distributions can be measured and quantified even in 3D by tomographic methods.&#13;
&#13;
Here we present several neutron imaging investigations of embrittlement and cracking in Fe and Zr based metal alloys and optimization studies of hydrogen storage systems containing metal hydrides as an active substance. The advantages and the limitations of the experimental methods as well as the attempts for hydrogen quantification will be discussed in detail.</abstract>
    <identifier type="doi">10.1017/S1431927622006638</identifier>
    <enrichment key="eventName">M&amp;M 2022 Annual Meeting (Microscopy &amp; Microanalysis)</enrichment>
    <enrichment key="eventPlace">Portland, Oregon, USA</enrichment>
    <enrichment key="eventStart">31.07.2022</enrichment>
    <enrichment key="eventEnd">04.08.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>N. Kardjilov</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron imaging techniques</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen in metals</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>65192</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of build up height on residual stresses in additive repair and modification using DED Arc</title>
    <abstract language="eng">Directed Energy Deposition (DED)-Arc is suitable for the hybrid additive manufacturing, modification and repair of large metal components with high deposition rates. Residual stresses and distortion are of central importance when characterizing the manufactured components and the sensitive transition area between AM component and semi-finished product. Residual stresses caused by the thermal cycles during the manufacturing process can impair the mechanical properties of the manufactured parts and can lead component failure. Therefore, understanding and controlling residual stresses, especially when combining different base and filler materials, is critical to improving the quality and efficiency of the hybrid DED-Arc process. This article deals with the influence of the build-up height on the residual stress distribution of additively manufactured components with a selected base and filler material combination. Using a robot-assisted DEDsystem and a controlled short arc, systematic step cancellation tests were carried out at a selected working temperature (200 C°) and heat input (600 kJ/m). In a 5-stage termination experiment, straight walls were produced using a one bead per layer strategy and selected increasing component heights between 15 mm and 300 mm. The influence of the build height on the longitudinal residual stress in the process direction was analyzed and discussed. All experiments showed a comparable stress distribution in the area of the substrate plate up to the heat-affected zone (HAZ) and the transition zone, regardless of the buliding height. However, the height showed a significant influence on the of residual stress distribution of the deposited AM-component. High positive stress gradients with a maximum range between 300 MPa to 400 MPa were always found in the last approx. 18 component layers (upper 40 mm), which can be explained by the shrinkage of the nonheat- treated top layer. Underlying layers, where present, showed a homogeneous residual stress distribution characterized by low compressive stresses. This can be explained by the process related tempering during the deposition of the upper layers. A constant boundary layer number was determined for all specimens. Once this number was exceeded, the distribution of residual stresses no longer changed, but merely shifted with the increasing height of the component in the direction of build-up. These correlations contribute to the understanding of residual stress development with increasing structure height. This study is part of a running research project on the properties of hybrid additive components and processes. It aims the stress optimized hybrid additive manufacturing of high-strength components and the necessary recommendations for application.</abstract>
    <enrichment key="eventName">78th IIW Annual Assembly  and International Conference on Welding and Joining</enrichment>
    <enrichment key="eventPlace">Genoa, Italy</enrichment>
    <enrichment key="eventStart">22.06.2025</enrichment>
    <enrichment key="eventEnd">27.06.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>R. Scharf-Wildenhain</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DED-Arc</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65189</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Wear resistance of modified Ni based claddings in relation to the resulting machinability via ultrasonic-assisted milling</title>
    <abstract language="eng">In the field of plastics processing, extruder screws are subjected to significant wear stresses. The extruder screw is the main wear component in those production machines and is usually coated with intermetallic wear protection alloys composed of Ni-based alloys, specifically Colmonoy C56 PTA (NiMoCrSi). There is a growing demand for providing an economic machinability of these alloys to achieve defined contours with a sufficient surface integrity. Recent investigations exhibit promising results applying ultrasonic milling for such hard-to-cut materials. The Colmonoy C56 is modified by various alloying additions Ti, Nb, Mo, Hf, and Al, and then cladded on a steel S355 via Plasma Transferred Arc process. The effect of alloying additions on the microstructure is analyzed regarding their resistance to abrasive and adhesive wear. With Miller test ASTM G75 the influence of alloying elements on resistance to abrasive wear for two abrasive materials is investigated (high-grade corundum F220 and quartz powder). The wear loss is not increased for additions of Nb and Ti compared to the base material C56. Modifications with Hf or Al reduces the resistance to abrasive wear and significantly increases material loss. The extruder screw is also subject to adhesive wear, which can be quantified by means of the pin-roll test. It is demonstrated that the addition of Hf, for example, contributes to a reduction in wear loss. Aim of the investigations is to find suitable modifications for the wear claddings of C56 for a sufficient machineability, without compemising the wear resistant. The machinability is considerably affected by the alloy additions, and is determined using ultrasonic-assisted milling. The addition of hafnium reduces machinability, i.e. significantly increases cutting forces. The incorporation of Nb exhibits a significant reduction of cutting forces, and results in reduced tool wear and an enhanced of surface integrity (roughness, density of defects, residual stresses).</abstract>
    <enrichment key="eventName">Wear of Materials 2025</enrichment>
    <enrichment key="eventPlace">Sitges, Spain</enrichment>
    <enrichment key="eventStart">13.04.2025</enrichment>
    <enrichment key="eventEnd">17.04.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Dirk Schröpfer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Abrasive wear</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Adhesive wear</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Colmonoy C56</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PTA welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Service life and efficiency</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Substitution of critical raw materials</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Surface integrity</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Ultrasonic-assisted milling process</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65210</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Werkstoffsichere Dickblechschweißung und KI</title>
    <abstract language="deu">Der Vortrag zeigt, welche Herausforderungen beim Schweißen sogenannter Dickblechverbindungen bestehen und welche Strategien zur Lösung genutzt werden können. Ansätze zur Fehlerprävention werden vorgestellt. Es wird dargestellt, wie KI-basierte Methoden die Fehlererkennung erleichtern. Letztlich werden Potentiale zur effizienten Fehlerbeseitigung aufgezeigt und der Anwendernutzen herausgestellt.</abstract>
    <enrichment key="eventName">Mitgliederversammlung der Forschungsvereinigung Stahlanwendung e. V.</enrichment>
    <enrichment key="eventPlace">Essen, Germany</enrichment>
    <enrichment key="eventStart">17.12.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Arne Kromm</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>UP-Schweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Eigenspannungen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Künstliche Intelligenz</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Reparatur</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.3 Schweißtechnische Fertigungsverfahren</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65209</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Residual stress evaluation using the contour method of an additive manufactured high-strength steel solid cuboid</title>
    <abstract language="eng">Direct Energy Deposition with Arc (DED-Arc) enables the weight-optimized and near-net-shape manufacturing of complex structures. Lightweight construction principles allow a reduction of CO2 emissions by saving time, costs, and resources. Further optimisations can be achieved by using high-strength steel. This allows for a reduction in wall thickness and optimisation of weight. However, manufacturing intricate geometries using high-strength steels poses challenges in managing residual stresses (RS), which are essential for ensuring the structural integrity of welded components. High residual stresses can increase the risk of cold cracking, arising from the complex interactions between material properties, process conditions, and component design. Despite the availability of suitable filler metals, the lack of comprehensive knowledge and guidelines on residual stress formation limits the industrial application. &#13;
Therefore, in the present study, the contour method (CM) was used to analyse the full field longitudinal residual stresses in an solid cuboid component (dimensions: 120 × 50 × 35 mm³) manufactured by DED-Arc. The CM enables the analysis of the two-dimensional map of residual stresses normal to a cutting plane using a finite element model. For this purpose, a solid cuboid component was welded fully automatically with a high-strength solid wire specially adapted for DED-Arc (yield strength &gt; 790 MPa) onto conventionally manufactured substrates made of S690QL. The residual stresses from CM in the volume are compared with residual stress analyses using X-Ray diffraction on the surface. Additionally, comparative data from previous studies on hollow cuboid structures was included in order to identify similarities and differences in the resulting stress state, and to complement and validate the CM results. These results demonstrate the significant influence of the geometry on the residual stress profiles within the solid cuboid in relation to the open hollow.</abstract>
    <enrichment key="eventName">4th International Conference on Advanced Joining Processes 2026</enrichment>
    <enrichment key="eventPlace">Coimbra, Portugal</enrichment>
    <enrichment key="eventStart">16.10.2025</enrichment>
    <enrichment key="eventEnd">17.10.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Dirk Schröpfer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Contour method</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DED-Arc/M</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High-strength steel</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Filler metals</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron diffraction</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Infrastruktur</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <collection role="themenfelder" number="">Leichtbau</collection>
  </doc>
  <doc>
    <id>65153</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>10</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>571</volume>
    <type>article</type>
    <publisherName>Elsevier B.V.</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Wear resistance of modified NiMoCrSi claddings in relation to the resulting surface machinability via ultrasonic-assisted milling</title>
    <abstract language="eng">In the field of plastics processing, extruder screws are subjected to significant wear stresses. The extruder screw is the main wear component in those production machines and is usually coated with intermetallic wear protection alloys composed of Ni-based alloys, specifically Colmonoy C56 PTA (NiMoCrSi). There is a growing demand for providing an economic machinability of these alloys to achieve defined contours with a sufficient surface integrity. Recent investigations exhibit promising results applying ultrasonic milling for such hard-to-cut materials. The Colmonoy C56 is modified by various alloying additions Ti, Nb, Mo, Hf, and Al, and then cladded on a steel S355 via Plasma Transferred Arc process. The effect of alloying additions on the microstructure is analyzed regarding their resistance to abrasive and adhesive wear. With Miller test ASTM G75 the influence of alloying elements on resistance to abrasive wear for two abrasive materials is investigated (high-grade corundum F220 and quartz powder). The wear loss is not increased for additions of Nb and Ti compared to the base material C56. Modifications with Hf or Al reduces the resistance to abrasive wear and significantly increases material loss. The extruder screw is also subject to adhesive wear, which can be quantified by means of the pin-roll test. It is demonstrated that the addition of Hf, for example, contributes to a reduction in wear loss. Aim of the investigations is to find suitable modifications for the wear claddings of C56 for a sufficient machineability, without compemising the wear resistant. The machinability is considerably affected by the alloy additions, and is determined using ultrasonic-assisted milling. The addition of hafnium reduces machinability, i.e. significantly increases cutting forces. The incorporation of Nb exhibits a significant reduction of cutting forces, and results in reduced tool wear and an enhanced of surface integrity (roughness, density of defects, residual stresses).</abstract>
    <parentTitle language="eng">Wear</parentTitle>
    <identifier type="issn">0043-1648</identifier>
    <identifier type="doi">10.1016/j.wear.2025.205830</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-651530</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_crossrefLicence">https://www.elsevier.com/tdm/userlicense/1.0/</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorIdentifierOrcid_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorIdentifierOrcid_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,PersonAuthorFirstName_6,PersonAuthorLastName_6,PersonAuthorFirstName_7,PersonAuthorLastName_7,PersonAuthorIdentifierOrcid_7,PublisherName,TitleMain_1,Language,TitleParent_1,ArticleNumber,Volume,PublishedYear,IdentifierIssn,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="date_peer_review">17.12.2025</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Maraike Graebner</author>
    <author>Marcel Giese</author>
    <author>Svenja Lorenz</author>
    <author>Kai Treutler</author>
    <author>Dirk Schröpfer</author>
    <author>Volker Wesling</author>
    <author>Thomas Kannengießer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Colmonoy C56</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PTA welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Adhesive wear</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Abrasive wear</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Ultrasonic-assisted milling process</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Surface integrity</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Service life and efficiency</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Substitution of critical raw materials</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65153/1-s2.0-S0043164825000997-main.pdf</file>
  </doc>
  <doc>
    <id>65571</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>15</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Springer Science and Business Media LLC</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Hydrogen diffusion in thick-walled S690 saw joints: part 1—experimental determination of microstructure-dependent diffusion coefficients</title>
    <abstract language="eng">High-strength low-alloyed steel S690 is widely used in heavy-duty applications, such as structural components, mobile cranes, and industrial plant construction, owing to their high strength and weldability. However, thick-plate submerged arc welding (SAW) can introduce elevated hydrogen levels and residual stresses that promote time-delayed hydrogen-assisted&#13;
cold cracking (HACC). Accurate, microstructure-specific diffusion data are scarce, limiting predictive HACC assessments. This study presents an experimental determination of hydrogen diffusion coefficients (DH) in two S690 variants: thermomechanically rolled (S690MC) and quenched and tempered (S690Q). Multi-layer SAW welds were produced from 30 mm thick plate material at three heat input levels, and diffusion membranes were extracted from weld metal (WM), heat-affected zone (HAZ), and base material (BM). Hydrogen permeation tests, conducted in accordance with DIN En ISO 17081, yielded flux curves normalized in time from which DH was derived using the inflection-point method. At room temperature, DH values ranged from 6 × 10−5 mm2/s to 9 × 10−5 mm2/s across all regions and heat inputs, with no significant difference between S690MC and S690Q. Weld metal exhibited marginally lower DH, attributed to enhanced hydrogen trapping, while base material measurements showed greater variability. These microstructure-resolved diffusion coefficients add quantitative data for modern S690 SAW welds and provide internally consistent input parameters for the numerical simulations presented in part 2. The results support improved parameterization for subsequent assessments of HACC risk through the optimization of welding parameters.</abstract>
    <parentTitle language="eng">Welding in the World</parentTitle>
    <identifier type="issn">0043-2288</identifier>
    <identifier type="doi">10.1007/s40194-026-02400-7</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-655711</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_crossrefLicence">https://creativecommons.org/licenses/by/4.0</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorIdentifierOrcid_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,PublisherName,TitleMain_1,Language,TitleAbstract_1,TitleParent_1,PublishedYear,IdentifierIssn,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="date_peer_review">09.03.2026</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Denis Czeskleba</author>
    <author>Michael Rhode</author>
    <author>Karsten Wandtke</author>
    <author>Muhammad Dary Irfan</author>
    <author>Thomas Kannengiesser</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen assisted cracking</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Submerged arc welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electrochemical permeation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65571/s40194-026-02400-7.pdf</file>
  </doc>
  <doc>
    <id>65572</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>16</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Springer Science and Business Media LLC</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Hydrogen diffusion in thick-walled S690 SAW joints: part 2 – predictive modeling of heat input and microstructure influence</title>
    <abstract language="eng">High-strength low-alloy (HSLA) steels such as S690 are widely employed in thick-walled welded structures, where hydrogen-assisted cold cracking (HACC) remains a persistent concern. While microstructure-specific hydrogen diffusion coefficients (DH) for weld metal (WM), heat-affected zone (HAZ), and base material (BM) were experimentally established in Part 1 of this study, their quantitative influence on hydrogen accumulation and effusion has not yet been fully clarified. This work presents a transient, spatially resolved numerical model for simulating hydrogen transport in multi-pass submerged arc welds. The model integrates experimentally determined DH values with realistic thermal cycles and temperature-dependent boundary conditions. Developed in Python, the simulation tool is purpose-built for hydrogen diffusion in welded joints. It offers a focused, transparent alternative. It offers a focused, transparent alternative to general-purpose finite element platforms. Parametric analyses demonstrate that, although the diffusion coefficients vary by up to 50%, their impact on overall hydrogen retention is minor. In contrast, plate thickness, bead geometry, cooling time (t₈/₅), and interpass temperature exert a dominant influence on hydrogen distribution. Despite clear microstructural differences between the thermomechanically rolled (S690MC) and quenched and tempered (S690Q) variants, including opposite HAZ hardness responses (softening in S690MC, hardening in S690Q) in the (pen)ultimate weld bead, the simulations confirm that their diffusion behavior and hydrogen solubility are closely aligned. Consequently, differences in DH and solubility exert only a minor influence on hydrogen retention compared to thermal exposure and joint geometry. These findings support the interchangeable use of both steel grades in terms of HACC risk due to hydrogen diffusion kinetics under comparable welding conditions.</abstract>
    <parentTitle language="eng">Welding in the World</parentTitle>
    <identifier type="issn">0043-2288</identifier>
    <identifier type="doi">10.1007/s40194-026-02395-1</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-655721</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_crossrefLicence">https://creativecommons.org/licenses/by/4.0</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorIdentifierOrcid_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,PublisherName,TitleMain_1,Language,TitleAbstract_1,TitleParent_1,PublishedYear,IdentifierIssn,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="date_peer_review">09.03.2026</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Denis Czeskleba</author>
    <author>Michael Rhode</author>
    <author>Karsten Wandtke</author>
    <author>Muhammad Dary Irfan</author>
    <author>Thomas Kannengiesser</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen assisted cracking</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Numerical simulation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Submerged arc welding</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65572/s40194-026-02395-1.pdf</file>
  </doc>
  <doc>
    <id>65682</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>12</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Sage Journals</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of ultrasonic-assisted milling on surface integrity of additively manufactured components using MSG processes</title>
    <abstract language="eng">Additive manufacturing (AM) is increasingly used for producing complex metallic components. Subsequent machining is essential to achieve final geometries and surface conditions. The resulting surface integrity, particularly the near-surface residual stress state, plays a crucial role in component performance and fatigue life. This study investigates the potential of ultrasonic-assisted milling (USAM), a hybrid machining process, to improve surface integrity and machinability compared to conventional milling (CM). Three materials were investigated, two difficult-to-cut materials CoCr26Ni9Mo5W and FeNi36 and a low-alloy steel S355J2C. The CoCr26Ni9Mo5W and FeNi36 were additively manufactured via Directed Energy Deposition (DED)-Arc and then machined with varying cutting speeds and feed rates within a Design of Experiments. USAM exhibited enhanced machinability and surface integrity, particularly at low cutting speeds, by reducing cutting forces up to 40% and shifting near-surface residual stresses from tensile to compressive. For S355J2C, USAM reduced cutting forces by approximately 45% and induced near-surface compressive residual stresses up to approximately −700 MPa. Rotating bending tests (DIN50100) show that USAM increases the technical fatigue limit from 307 MPa (CM) to 341 MPa (USAM), i.e., by ∼11%. These findings highlight the advantages of ultrasonic assistance in post-AM machining, offering enhanced fatigue performance and surface quality for various metallic materials.</abstract>
    <parentTitle language="eng">Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications</parentTitle>
    <identifier type="doi">10.1177/14644207261416395</identifier>
    <enrichment key="eventName">4th International Conference on Advanced Joining Processes 2025</enrichment>
    <enrichment key="eventPlace">Coimbra, Portugal</enrichment>
    <enrichment key="eventStart">16.10.2025</enrichment>
    <enrichment key="eventEnd">17.10.2025</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">18.03.2026</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Lorenz Engelking</author>
    <author>A. Eissel</author>
    <author>Mauro Madia</author>
    <author>Dirk Schröpfer</author>
    <author>K. Treutler</author>
    <author>Julius Kruse</author>
    <author>Thomas Kannengießer</author>
    <author>V. Wesling</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Ultrasonic-assisted milling</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Surface integrity</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
  </doc>
  <doc>
    <id>65679</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>12</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Spriner</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of build‑up height on residual stresses in additive repair and modification using DED‑Arc with high‑strength filler metals</title>
    <abstract language="eng">Directed energy deposition (DED)-Arc is suitable for the hybrid additive manufacturing, modification and repair of large metal components with high deposition rates. Residual stresses and distortion are of central importance when characterizing the manufactured components and the sensitive transition area between additive manufactured (AM) component and semifinished product. Residual stresses caused by the thermal cycles during the manufacturing process can impair the mechanical properties of the manufactured parts and can lead to component failure, especially for high-strength steels. Therefore, understanding and controlling residual stresses, when combining different base and feedstock materials, is critical to improve the quality and efficiency of the hybrid DED-Arc process. This article deals with the influence of the build-up height on the residual stress distribution of additively manufactured components with a selected base and feedstock material from commercial high-strength steels. Using a robot-assisted DED-system and a controlled short arc, AM welding experiments were carried out with close to the application parameters at working temperature (200 °C) and heat input (650 kJ/m). Five hybrid AM specimens (AM wall on upright structural steel plate) were produced using a one bead per layer strategy and selected AM-wall heights between 15 and 300 mm. The influence of the AM build height on the longitudinal residual stress in the whole hybrid AM specimen (in welding direction) was analyzed and discussed. All experiments exhibit comparable stress distributions in the area of the substrate plate up to the heat-affected zone (HAZ) and the transition zone, regardless of the building height. The height significantly influences the residual stress distribution of the deposited AM-component. Tensile residual stresses with a maximum range between 300and 400 MPa were always found in the last approx. 18 component layers (upper 40 mm). This is due to restraint of the shrinking of the top layers by the layers below. The lower layers show homogeneous residual stress distributions characterized by low compressive stresses due to the process-related tempering during the deposition of each layer on top of each other. As a result, the significant difference between the various AM build-up heights of the hybrid AM specimens is the extent (or height) of this tempered zone with low compressive stresses. These correlations contribute to the understanding of residual stress development with increasing structure height or ratio of component heights of substrate semi-finished product and AM component in hybrid additive manufacturing.</abstract>
    <parentTitle language="eng">Welding in the World</parentTitle>
    <identifier type="doi">10.1007/s40194-026-02417-y</identifier>
    <identifier type="issn">1878-6669</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-656793</identifier>
    <enrichment key="eventName">78th  IIW Annual Assembly and International Conference</enrichment>
    <enrichment key="eventPlace">Genoa, Italy</enrichment>
    <enrichment key="eventStart">22.06.2025</enrichment>
    <enrichment key="eventEnd">27.06.2025</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">18.03.2026</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>R. Scharf-Wildenhain</author>
    <author>Lorenz Engelking</author>
    <author>A. Hälsig</author>
    <author>Dirk Schröpfer</author>
    <author>Thomas Kannengießer</author>
    <author>J. Hensel</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>DED-Arc</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Heat control</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65679/Influence of buildup height on residual stresses in additive repair and modification.pdf</file>
  </doc>
  <doc>
    <id>65699</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>13</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Springer Science and Business Media LLC</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of microstructure on the machinability and surface integrity of additively manufactured iron aluminides</title>
    <abstract language="eng">The increasing global focus on energy and resource efficiency has stimulated a growing interest in additive manufacturing. AM offers economic advantages and enables an efficient use of materials. However, AM components often require subsequent mechanical post-processing, such as machining (e.g., milling), to achieve the final contours or surfaces. This is a particular challenge due to the heterogeneous and anisotropic nature of AM structures, which affect machining and the resulting component properties. High-performance materials such as iron aluminide represent a promising alternative to conventional high-temperature materials with a significant economic advantage. However, the strength and hardness properties, which are advantageous for applications in highly stressed lightweight components, pose a challenge for economical machining in addition to the AM microstructure properties. The difficult-to-cut material causes accelerated tool wear and insufficient surface quality. This study shows that crack-free additive manufacturing of the three-component system of iron-nickel-aluminum is possible, and advantages in terms of machinability compared to FeAl-AM components are achieved. The more homogeneous microstructure leads to a reduction in cutting forces, with positive effects on the machinability and optimized surface integrity. Ultrasonic assisted milling (USAM) offers great potential to address the major challenges posed by difficult-to-cut materials and additively manufactured weld structures. Therefore, this study focuses on assessing the transferability of previous positive results by USAM to the selected iron aluminide alloys. The machinability of the aluminides is analyzed by varying significant influencing variables in finish milling experiments and evaluated in terms of the loads on the tool and the resulting surface integrity.</abstract>
    <parentTitle language="eng">Welding in the World</parentTitle>
    <identifier type="issn">0043-2288</identifier>
    <identifier type="doi">10.1007/s40194-026-02382-6</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-656993</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_crossrefLicence">https://creativecommons.org/licenses/by/4.0</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,PublisherName,TitleMain_1,Language,TitleAbstract_1,TitleParent_1,PublishedYear,IdentifierIssn,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="date_peer_review">18.03.2026</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Julien Witte</author>
    <author>Kai Treutler</author>
    <author>Dirk Schroepfer</author>
    <author>Thomas Kannengiesser</author>
    <author>Volker Wesling</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Iron aluminide</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Machinability</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Surface integrity</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Ultrasonic-assisted milling process</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="ddc" number="624">Ingenieurbau</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Infrastruktur</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Materialdesign</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <collection role="themenfelder" number="">Leichtbau</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65699/s40194-026-02382-6.pdf</file>
  </doc>
  <doc>
    <id>65716</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Determination, Assessment and Quantification of Hydrogen in Multi-pass / Multi-layer Weld Joints by Adapted ISO 3690 Samples - DEAQuade -</title>
    <abstract language="eng">High-strength, low-alloy (HSLA) structural steels, such as S690 and higher grades, are used in numerous applications, enabling sustainable, lightweight structural construction. However, the welded joints of these steels can be susceptible to hydrogen-assisted cold cracking (HACC), especially in the hardened weld metal (WM) or heat-affected zone (HAZ). HACC in high-strength welds basically involves a critical combination of local, mutually dependent parameters consisting of: (1) a crack-critical microstructure; (2) sufficiently high mechanical stress; and (3) a diffusible hydrogen concentration (HD). In this context, thick-walled steel weld joints typically involve multi-layer welding with several passes. This leads to an effective, empirically known reduction in the global HD in the weld seam. This reduction is due to the repeated reheating of subsequently welded beads or layers, which reduces the local HD in the individual weld beads or layers. However, this has not yet been adequately quantified or described. Bead-on-plate tests, such as ISO 3690, cannot correctly reproduce the local HD distribution in individual welding passes (and thus, the global HD in the entire seam). Therefore, these tests lead to an extremely conservative evaluation of hydrogen ingress and the potential for "self-reduction" of HD due to increased interpass temperature during multi-layer welding, which has not yet been adequately addressed in the literature. Ideally, the local HD in each pass and the global (average) HD of the multi-layer weld would be known immediately after welding. For this reason, the study proposes an approach to address the local, track-, and layer-dependent, as well as global, hardness (HD) of multi-layer welds via a modified ISO 3690 test. To this end, representative welding parameter combinations for selected practical welding processes (e.g., SAW, GMAW, or SMAW) will be carried out as conventional bead-on-plate samples. These samples will be systematically extended by an increasing number of welding passes. Several sample series with an increasing number of beads or layers will be examined. Additionally, the initial HD is varied by methods such as targeted shielding gas variation (e.g., addition of hydrogen in GMAW) or moistened flux/coating (e.g., SAW/SMAW). Based on experimental data (temperature field measurements during welding and determination of temperature-dependent HD coefficients), a numerical hydrogen diffusion model is created. This model calculates the local HD (in the beads) and the HD across the weld cross-section. Additional variation calculations represent heat transfer conditions that were not recorded experimentally and their influence on HD distribution. Finally, we investigate the potential use of the modified ISO 3690 multi-layer geometry for application cases such as (1) predicting the effectiveness and necessity of hydrogen removal heat treatment procedures for given welding parameter sets and (2) extending the HD classification definition (e.g., allowing HD10 use for HSLA steels with RP0.2 &gt; 690 MPa instead of HD5). Finally, an international round robin should be initiated once the concept has been successfully confirmed and verified.</abstract>
    <enrichment key="eventName">IIW Intermediate Meeting, Com. II-A</enrichment>
    <enrichment key="eventPlace">Bangkok, Thailand</enrichment>
    <enrichment key="eventStart">17.03.2026</enrichment>
    <enrichment key="eventEnd">17.03.2026</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydrogen assisted cracking</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Multi-pass welding</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Cold cracking test</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>65774</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">(K)ein explosives Thema? - Schweißen an und auf zukünftigen Wasserstoffpipelines im Betrieb unter Druckgasfluss</title>
    <abstract language="deu">Das Schweißen an druckführenden Leitungen im Betrieb ist beim Erdgas-Fernleitungsnetz Stand der Technik, beispielsweise beim Setzen von Abgängen durch „Hot-Tapping“. Diese Technik wird auch beim zukünftigen Wasserstoff-Kernnetz eine bedeutende Rolle spielen. Verfahrensbedingt ist daher eine bestimmte Wasserstoffaufnahme während des Schweißens unvermeidbar. Aus diesem Grund werden derzeit in mehreren Forschungsprojekten wie umfassende Erkenntnisse zum Schweißen an Rohrleitungen unter Druckwasserstoff gewonnen. Die grundsätzliche Übertragbarkeit des „Hot-Tapping“ auf zukünftige Wasserstoff-Rohrleitungen wurde bereits bestätigt (u. a. DNV-Projekt und HyTap). Allerdings besteht allein das zukünftige Wasserstoff-Kernnetz in Deutschland aus einer Vielzahl von Bestands- und Neuwerkstoffen mit unterschiedlichen Festigkeiten, Durchmessern und Wandstärken. Für diese ist eine umfassende Betrachtung notwendig. In diesem Bereich leistet das Projekt H2-SuD wesentliche Beiträge, insbesondere zur Frage der Anpassung der Mindestwandstärke für sicheres Schweißen. Hierzu bieten die Demonstratoren eine ideale Grundlage zum Screening vieler Schweißparameter-Werkstoff-Kombinationen. Eine erhöhte Wasserstoffkonzentration beim Schweißen wurde experimentell belegt (DNV-Projekt und H2-SuD), allerdings im allgemein nicht als kritisch erachteten Bereich. Zudem wurde eine Wasserstoffversprödung der Schweißnaht während des Schweißens an druckwasserstoffführenden Demonstratoren bisher nicht beobachtet. Dies liegt u.a. an den mechanischen Eigenschaften der Rohrleitungswerkstoffe (gute Dehnfähigkeit, auch im geschweißten Zustand).</abstract>
    <enrichment key="eventName">Vortragsreihe des Bezirksverbandes Berlin des Deutschen Verbandes für Schweißen und verwandte Verfahren (DVS) e.V.</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">25.03.2026</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Martin Hübner</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Rohrleitung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Schweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Demonstrator</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Bauteilprüfung</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>65784</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Praktikable Prüfung der Wasserstoffverteilung in Mehrlagenschweißungen in Anlehnung an die DIN EN ISO 3690</title>
    <abstract language="deu">Das Forschungsvorhaben adressiert eine zentrale Lücke und damit einhergehende Einschränkung für geschweißte hochfeste Werkstoffe in der aktuellen Normung: Die DIN EN ISO 3690 erlaubt ausschließlich die Bestimmung des diffusiblen Wasserstoffs in einlagigen Prüfraupen und bildet damit die realen Bedingungen in mehrlagigen Schweißnähten hochfester Stähle nicht ab. Durch das mehrfache wiederholte Aufwärmen wird die eingebrachte Wasserstoffkonzentration deutlich unter die konservativen, einlagigen Prüfraupen bereits während des Schweißens abgesenkt. Hierzu fehlt jedoch eine einfache, experimentelle Methoden, um die tatsächliche lokale lagenabhängige bzw. globale Wasserstoffverteilung quantifizieren zu können. Das Vorhaben entwickelt daher erstmals eine Versuchsmethodik, der reale Diffusions- und Entgasungsbedingungen von Mehrlagenschweißungen experimentell reproduziert. Dadurch werden die Nachteile der ISO 3690 (einlagige Prüfraupe, konservative Bewertung) aufgehoben und mit dem Hauptvorteil (robuste, einfache Handhabung) kombiniert. Durch gezielte Variation von Wärmeführung, Zwischenlagentemperaturen und Wasserstoffangebot werden lokale und globale Wasserstoffverteilungen quantifiziert. Ergänzt durch ein numerisches Diffusionsmodell entsteht ein skalierbares Bewertungswerkzeug, das die experimentellen Daten generalisiert und auf reale Schweißnähte überträgt. Die Ergebnisse ermöglichen: (1) eine realitätsnahe Bewertung verbleibender Wasserstoffgehalte,  Kaltrisssicherheit, damit die (2) die mögliche Ausweitung der HD Klassifizierung hochfester Schweißzusätze, und (3) die Beurteilung der Effektivität und Notwendigkeit von Wärmenachbehandlungs-maßnahmen (wie „Wasserstoffarmglühen“).</abstract>
    <enrichment key="eventName">Sitzung des NA 092-00-05 GA Gemeinschaftsarbeitsausschuss NAS/NMP: Zerstörende Prüfung von Schweißverbindungen (DVS AG Q 4/Q 4.1)</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">24.03.2026</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Michael Rhode</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Schweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>ISO 3690</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Prüfung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Mehrlagennaht</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>65765</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Sichere Wasserstoffnetze ModuH2Pipe</title>
    <abstract language="deu">Modulare Testplattform für den sicheren Transport von Wasserstoff in neuen und vorhandenen Gasverteilnetzen Die BAM schafft mit der modularen Testplattform ModuH2Pipe erstmals in Europa eine Testinfrastruktur, welche die Betrachtung sicherheitstechnischer Fragestellungen im Realmaßstab und zugleich unter kritischen Bedingungen erlaubt, die sich im Zusammenhang mit Wasserstoff-und Wasserstoff-Erdgas-Pipelines stellen. Ziel ist, Gasnetzbetreibern u. a. ein Dienstleistungsangebot zur Verfügung zu stellen, welches die umfassende Beantwortung dieser und weiterer sicherheitstechnischer Fragestellungen ermöglicht. Die Testplattform ModuH2Pipe wird auf dem BAM Testgelände Technische Sicherheit (BAM TTS) stehen und integriert zwei Module, die für die experimentelle Untersuchung von Pipelinesegmenten, -komponenten (Dichtungen, Ventile etc.) und Polymerkomponenten im Originalmaßstab ausgelegt sind. Aber auch digitale Aspekte für Wasserstoffnetze können betrachtet werden.</abstract>
    <enrichment key="eventName">1. Fachtagung für Anlagen- und Prozesstechnik</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">24.03.2026</enrichment>
    <enrichment key="eventEnd">26.03.2026</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Peter Hartwig</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>ModuH2Pipe</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Testplattform</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Realmaßstab</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoffkernnetz</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="ddc" number="660">Chemische Verfahrenstechnik</collection>
    <collection role="institutes" number="">2 Prozess- und Anlagensicherheit</collection>
    <collection role="institutes" number="">2.1 Sicherheit von Energieträgern</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.1 Komponenten für Energieträger</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Chemie und Prozesstechnik</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
    <collection role="themenfelder" number="">Anlagensicherheit und Prozesssimulation</collection>
  </doc>
  <doc>
    <id>65744</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Schweißen an druckführenden Wasserstoff-Ferngasleitungen im Betrieb – Ein Überblick über aktuelle FuE-Ergebnisse</title>
    <abstract language="deu">Grüner Wasserstoff wird als zukünftiger Energieträger eine wichtige Rolle bei der Dekarbonisierung der Energieversorgung spielen. Der Transport über große Entfernungen wird mittels eines Wasserstoff-Fernleitungsnetzes erfolgen. Ein solches Netz erfordert regelmäßig Schweißarbeiten zu Reparatur-, Wartungs- oder Erweiterungszwecken. Im Erdgasnetz ist das Schweißen im laufenden Betrieb gängige Praxis, da eine Außerbetriebnahme der Leitung technisch und wirtschaftlich sehr schwierig ist. Wasserstoff kann jedoch in den Rohrleitungsstahl eindringen, insbesondere bei erhöhten Temperaturen. Dies könnte zu einer Degradation der Materialeigenschaften oder sogar zu einem Versagen führen, bedingt durch die bekannten Effekte der wasserstoffinduzierten Versprödung und der wasserstoffunterstützten Rissbildung. Im Forschungsprojekt H2-SuD wird dies gezielt untersucht. Hierfür werden unter anderem Druckgasbeladung, Schweißversuche an vereinfachten Ersatzgeometrien und an realitätsnahen Demonstratoren, sowie numerische Simulation auf Basis gewonnener experimenteller Daten eingesetzt.</abstract>
    <enrichment key="eventName">Sitzung DIN NA 092-00-05 GA</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">24.03.2026</enrichment>
    <enrichment key="eventEnd">24.03.2026</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Sebastian Kaiser</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Pipeline</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Schweißen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Wasserstoff</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Ferngasleitung</value>
    </subject>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Wasserstoff</collection>
  </doc>
  <doc>
    <id>65735</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>11</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Wiley</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of Ultrasonic-Assisted Milling on Surface  Integrity and Fatigue Strength of a Low Alloy Steel</title>
    <abstract language="eng">The milling process significantly influences the surface integrity of metallic components through machining induced near surface residual stresses. Modern hybrid machining processes, such as ultrasonic-assisted milling (USAM), offer the potential to induce beneficial near-surface compressive residual stresses compared to the near-surface tensile residual stresses typically resulting from conventional milling (CM). This study investigates the effects of USAM compared to CM on the near-surface residual stress state and fatigue performance of a S355J2C low-alloy steel. Milling experiments and subsequent rotating bending tests revealed that USAM significantly reduces cutting force by approximately 45% and induces near-surface compressive re sidual stresses as low as −733MPa. This leads to a significant improvement in fatigue strength estimated in approximately 34% compared to polished specimens and 11% compared to the CM. These findings highlight the potential of USAM to enhance the fatigue performance of components made of steel.</abstract>
    <parentTitle language="eng">Fatigue &amp; Fracture of Engineering Materials &amp; Structures</parentTitle>
    <identifier type="doi">10.1111/ffe.70259</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-657358</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">07.04.2026</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Lorenz Engelking</author>
    <author>Mauro Madia</author>
    <author>Dirk Schröpfer</author>
    <author>Julius Kruse</author>
    <author>Romeo Saliwan Neumann</author>
    <author>Thomas Kannengießer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fatigue strength</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Surface integrity</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Surface roughness</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Ultrasonic-assisted milling</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="ddc" number="621">Angewandte Physik</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.2 Versuchsanlagen und Prüftechnik</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Energie</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Windenergie</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65735/Influence of Ultrasonic_Assisted Milling on Surface Integrity and Fatigue Strength.pdf</file>
  </doc>
</export-example>
