<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>61476</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Neutron Diffraction Based Residual Stress Analysis of Additively Manufactured Alloys</title>
    <abstract language="eng">Additive manufacturing methods such as laser powder bed fusion offer an enormous flexibility in the efficient design of parts. In this process, a laser locally melts feedstock powder to build up a part layer-by-layer. It is this localized processing manner imposing large temperature gradients, resulting in the formation of internal stress and characteristic microstructures. Produced parts inherently contain high levels of residual stress accompanied by columnar grain growth and crystallographic texture. On a smaller scale, the microstructure is characterized by competitive cell-like solidification with micro segregation and dislocation entanglement. In this context, it is crucial to understand the interplay between microstructure, texture, and residual stress to take full advantage of the freedom in design. In fact, X-ray and neutron diffraction are considered as the benchmark for the non-destructive characterization of surface and bulk residual stress. The latter, characterized by a high penetration power in most engineering alloys, allows the use of diffraction angle close to 90°, enabling the employment of a nearly cubic gauge volume. However, the complex hierarchical microstructures produced by additive manufacturing present significant challenges towards the reliable characterization of residual stress by neutron diffraction. Since residual stress is not the direct quantity being measured, the peak shift imposed by the residual stress present in a material must be converted into a macroscopic stress. First, an appropriate lattice plane must be selected that is easily accessible (i.e., high multiplicity) and insensitive to micro strain accumulation. Second, a stress-free reference must be known to calculate a lattice strain, which can be difficult to define for the heterogeneous microstructures produced by additive manufacturing. Third, an appropriate set of diffraction elastic constants that relate the lattice strain to the macroscopic stress must be known. In this presentation, advancements in the field of residual stress analysis using neutron diffraction are presented on the example of the Ni-based superalloy Inconel 718. The effect of the complex microstructure on the determination of residual stress by neutron diffraction is presented. It is shown, how to deal with the determination of the stress-free reference. It is also shown that the selection of an appropriate set of diffraction elastic constants depends on the microstructure. Finally, the role of the crystallographic texture in the determination of the residual stress is shown.</abstract>
    <enrichment key="eventName">Deutsche Neutronenstreutagung</enrichment>
    <enrichment key="eventPlace">Aachen, Germany</enrichment>
    <enrichment key="eventStart">16.09.2024</enrichment>
    <enrichment key="eventEnd">18.09.2024</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Jakob Schröder</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron Backscatter Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed Fusion</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>58285</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Evolution of Creep Damage of 316L Produced by Laser Powder Bed Fusion</title>
    <abstract language="eng">The damage mechanisms of metallic components produced by process laser powder bed fusion differ significantly from those typically observed in conventionally manufactured variants of the same alloy. This is due to the unique microstructures of additively manufactured materials. Herein, the focus is on the study of the evolution of creep damage in stainless steel 316L specimens produced by laser powder bed fusion. X-ray computed tomography is used to unravel the influence of the process-specific microstructure from the influence of the initial void distribution on creep damage mechanisms. The void distribution of two specimens tested at 600 °C and 650 °C is analyzed before a creep test, after an interruption, and after fracture. The results indicate that the formation of damage is not connected to the initial void distribution. Instead, damage accumulation at grain boundaries resulting from intergranular cracking is observed.</abstract>
    <enrichment key="eventName">Annual International Solid Freeform Fabrication Symposium</enrichment>
    <enrichment key="eventPlace">Austin, TX, USA</enrichment>
    <enrichment key="eventStart">14.08.2023</enrichment>
    <enrichment key="eventEnd">16.08.2023</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Alexander Ulbricht</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AISI 316L</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Computed Tomography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Creep</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed Fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PBF-LB/M/316L</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>60295</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Formation of Creep Damage of 316L Produced by Laser Powder Bed Fusion</title>
    <abstract language="eng">The damage mechanisms of metallic components produced by process laser powder bed fusion differ significantly from those typically observed in conventionally manufactured variants of the same alloy. This is due to the unique microstructures of additively manufactured materials. Herein, the focus is on the study of the evolution of creep damage in stainless steel 316L specimens produced by laser powder bed fusion. X-ray computed tomography is used to unravel the influence of the process-specific microstructure from the influence of the initial void distribution on creep damage mechanisms. The void distribution of two specimens tested at 600 °C and 650 °C is analyzed before a creep test, after an interruption, and after fracture. The results indicate that the formation of damage is not connected to the initial void distribution. Instead, damage accumulation at grain boundaries resulting from intergranular cracking is observed.</abstract>
    <enrichment key="eventName">4th Symposium on Materials and Additive Manufacturing - Additive 2024</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">12.06.2024</enrichment>
    <enrichment key="eventEnd">14.06.2024</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Alexander Ulbricht</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AISI 316L</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Computed Tomography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Creep</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed Fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PBF-LB/M/316L</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>60289</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Diffraction and Single-Crystal Elastic Constants of Laser Powder Bed Fused Inconel 718</title>
    <abstract language="eng">Laser powder bed fusion (PBF-LB/M) of metallic alloys is a layer-wise additive manufacturing process that provides significant scope for more efficient designs of components, benefiting performance and weight, leading to efficiency improvements for various sectors of industry. However, to benefit from these design freedoms, knowledge of the high produced induced residual stress and mechanical property anisotropy associated with the unique microstructures is critical. X-ray and neutron diffraction are considered the benchmark for non-destructive characterization of surface and bulk internal residual stress. The latter, characterized by the high penetration power in most engineering alloys, allows for the use of a diffraction angle close to 90° enabling a near cubic sampling volume to be specified. However, the complex microstructures of columnar growth with inherent crystallographic texture typically produced during PBF-LB/M of metallics present significant challenges to the assumptions typically required for time efficient determination of residual stress. These challenges include the selection of an appropriate set of diffraction elastic constants and a representative lattice plane suitable for residual stress analysis. In this contribution, the selection of a suitable lattice plane family for residual stress analysis is explored. Furthermore, the determination of an appropriate set of diffraction and single-crystal elastic constants depending on the underlying microstructure is addressed.&#13;
In-situ loading experiments have been performed at the Swiss Spallation Neutron Source with the main scope to study the deformation behaviour of laser powder bed fused Inconel 718. Cylindrical tensile bars have been subjected to an increasing mechanical load. At pre-defined steps, neutron diffraction data has been collected. After reaching the yield limit, unloads have been performed to study the accumulation of intergranular strain among various lattice plane families.</abstract>
    <enrichment key="eventName">11th European Conference on Residual Stresses</enrichment>
    <enrichment key="eventPlace">Prag, Czech Republic</enrichment>
    <enrichment key="eventStart">03.06.2024</enrichment>
    <enrichment key="eventEnd">07.06.2024</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Jakob Schröder</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffraction Elastic Constants</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron Backscatter Diffraction</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>59900</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Diffraction and Single-Crystal Elastic Constants of Laser Powder Bed Fused Inconel 718</title>
    <abstract language="eng">In this presentation, the results of the determination of the diffraction and single-crystal elastic constants of laser powder bed fused Inconel 718 are presented. The analysis is based on high-energy synchrotron diffraction experiments performed at the Deutsches Elektronen-Synchrotron. It is shown that the characteristic microstructure of laser powder bed fused Inconel 718 impacts the elastic anisotropy and therefore the diffraction and single-crystal elastic constants. Finally, the consequences on the diffraction-based residual stress determination of laser powder bed fused Inconel 718 are discussed.</abstract>
    <enrichment key="eventName">AWT-Fachausschuss 13 "Eigenspannungen"</enrichment>
    <enrichment key="eventPlace">Wolfsburg, Germany</enrichment>
    <enrichment key="eventStart">19.03.2024</enrichment>
    <enrichment key="eventEnd">20.03.2024</enrichment>
    <enrichment key="RelatedIdentifier">https://doi.org/10.1016/j.matlet.2023.135305</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Jakob Schröder</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>In-Situ Testing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffraction Elastic Constants</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>61475</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Influence of Microstructure on the Diffraction-Based Residual Stress Determination in Laser Powder Bed Fused Inconel 718</title>
    <abstract language="eng">Additive manufacturing processes such as laser powder bed fusion (PBF-LB) offer the ability to produce parts in a single manufacturing step. On the one hand, this manufacturing technique offers immense geometric freedom in part design due to its layer-by-layer manufacturing strategy. On the other hand, the localized melting and solidification impose the presence of large temperature gradients in the process. From a microstructural perspective, this inevitably results in micro-segregation and a columnar grain structure, often paired with a significant crystallographic texture. Even worse, these large temperature gradients can lead to internal stress-induced deformation or cracking during processing. At the very least, residual stress is retained in the final structures as a footprint of this internal stress. In this context, diffraction-based methods allow the non-destructive characterization of the residual stress field in a non-destructive fashion. However, the accuracy of these methods is directly related to the microstructural characteristics of the material of interest. First, diffraction-based methods access microscopic lattice strains. To relate these lattice strains to a macroscopic stress, so-called diffraction elastic constants must be known. The deformation behavior is directly linked to the microstructure. Therefore, the diffraction elastic constants also depend on the microstructure. Second, the presence of crystallographic texture should be considered in the residual stress determination, as variations in crystal orientations contribute differently to the diffraction signal.&#13;
Here we present the influence of the microstructure on the determination of residual stress by diffraction-based methods in as-built PBF-LB Inconel 718 parts. We obtained different microstructures by employing two different scanning strategies. In particular, different crystallographic textures were obtained by changing the relative angle of the scan vectors to the geometric axes of the part. The texture-based characterization of the residual stress field was carried out by surface, sub-surface, and bulk residual stress measurements. It was found that the residual stress determination significantly depends on the microstructure for strong crystallographic textures.</abstract>
    <enrichment key="eventName">Material Science and Engineering Congress</enrichment>
    <enrichment key="eventPlace">Darmstadt, Germany</enrichment>
    <enrichment key="eventStart">24.09.2024</enrichment>
    <enrichment key="eventEnd">26.09.2024</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <author>Jakob Schröder</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron Backscatter Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual Stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>X-ray Diffraction</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>56789</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Ermüdung von additiv gefertigtem Stahl AISI 316L: Zyklische plastische Verformung</title>
    <abstract language="deu">Das zyklische plastische Verformungsverhalten von additiv gefertigtem Edelstahl AISI 316L wurde in dehnungsgeregelten Kurzzeitfestigkeitsversuchen (LCF-Versuchen) untersucht. Dabei wurden zwei Wärmebehandlungszustände betrachtet: Beim ersten Zustand war die fertigungsbedingte zelluläre Struktur vorhanden, während sie durch die zweite Wärmebehandlung aufgelöst wurde. Untersuchungen im Transmissions-Elektronen-Mikroskop (TEM) zeigten, dass die zyklische Verformung die Zellstruktur lokal zerstörte und Gleitbänder entstanden, was die Entfestigung in diesem Fall erklärt. Für Material ohne Zellstrukturen resultierten nach zyklischer Verformung ähnliche Versetzungsstrukturen wie in konventionell gefertigtem (warmgewalzten) Material.</abstract>
    <enrichment key="eventName">OVGU-Kolloquium (BMDK des IWF)</enrichment>
    <enrichment key="eventPlace">Magdeburg, Germany</enrichment>
    <enrichment key="eventStart">23.06.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Tiago Werner</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Additive Fertigung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Kurzzeitfestigkeit</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Mikrostrukturentwicklung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Versetzungsstrukturen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>TEM</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>64688</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>15</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>945</volume>
    <type>article</type>
    <publisherName>Elsevier B.V.</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Microstructure-based modelling of the anisotropic creep behaviour in additively manufactured INCONEL 718</title>
    <abstract language="eng">The existing gap in the adequate prediction of the microstructure-property relationships remains a significant barrier to the safe application of the additively manufactured materials. This challenge is fundamentally tied to the intricate microstructural defects that emerge during the processing. Systematic microstructure-based modelling can offer solutions to address this bottleneck.&#13;
In this work, we utilize a crystal plasticity model, developed for gamma''-strengthened Ni-base alloys and calibrated with single crystal tensile and creep tests of Inconel 718. By systematically refining the representative volume element complexity---from equiaxed to elongated grain morphologies, and from unimodal to bimodal orientation and grain size distributions---we demonstrate how each layer of structural realism contributes to the model’s predictive capacity.&#13;
Creep tests of laser-based powder bed fusion (PBF-LB/M) manufactured samples in three orientations (with the tensile axis parallel, perpendicular, and 45° tilted relative to the building direction) were performed at 650° C, accompanied by electron backscatter secondary diffraction measurements. The results of our simulations reveal that the bimodal grain morphology and crystallographical texture significantly influence the observed creep anisotropy. We show that the elongated grain structure combined with grain boundary sliding plays a major role in the creep response, specifically in tilted specimens.</abstract>
    <parentTitle language="eng">Materials Science &amp; Engineering A</parentTitle>
    <identifier type="doi">10.1016/j.msea.2025.149029</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-646884</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Kaveh Kianinejad</author>
    <author>Fabian Czediwoda</author>
    <author>U. Glatzel</author>
    <author>R. Völkl</author>
    <author>B. Stöhr</author>
    <author>Luis Ávila Calderón</author>
    <author>Sina Schriever</author>
    <author>Romeo Saliwan Neumann</author>
    <author>Bernard Fedelich</author>
    <author>Reza Darvishi Kamachali</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufactured Ni-base superalloys</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Creep Anisotropy</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Crystal plasticity</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">5.5 Materialmodellierung</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/64688/Manuscript.pdf</file>
  </doc>
  <doc>
    <id>65095</id>
    <completedYear/>
    <publishedYear>2026</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>593</pageFirst>
    <pageLast>608</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>41</volume>
    <type>article</type>
    <publisherName>Elsevier B.V.</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">The impact of scanning strategy on cell structures in PBF-LB/M/IN718: an in situ synchrotron x-ray diffraction study</title>
    <abstract language="eng">In additive manufacturing, any change of the process parameters, such as scanning strategy, directly affects the cooling rates, heat accumulation, and overall thermal history of the build. Consequently, parts built with different process parameters tend to have different levels of crystallographic texture, residual stress, and dislocation density. These features can influence the properties of the material and their development during post-processing operations. In this study, IN718 prisms were built by laser powder bed fusion (PBF-LB/M) using two different scanning strategies (continuous 67° rotations around the build direction, ROT, and alternating 0°/67° scans, ALT) to provide two different as-built conditions. In situ time-resolved synchrotron diffraction was performed during a solution heat treatment at 1027 °C for 1 h. Ex situ scanning electron microscopy was used to support and complement the in situ observations. An approach to quantify the effect of elemental microsegregation at the cell walls is developed based on the deconvolution of asymmetric γ-nickel matrix peaks. Following this approach, the scanning strategies are shown to affect the as-built fraction of cell walls in the material, resulting in a difference of approximately 5 %, in weight fraction, between ROT and ALT (19 % vs. 24 %, respectively). This microsegregation was observed to be rapidly homogenized during the heating ramp, and no significant changes to the peak shape in the γ peaks occurred during the isothermal part of the heat treatment, regardless of the scanning strategy.</abstract>
    <parentTitle language="eng">Journal of Materials Research and Technology</parentTitle>
    <identifier type="issn">2238-7854</identifier>
    <identifier type="doi">10.1016/j.jmrt.2025.11.214</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-650958</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_crossrefLicence">https://www.elsevier.com/tdm/userlicense/1.0/</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorIdentifierOrcid_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorIdentifierOrcid_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorIdentifierOrcid_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,PersonAuthorIdentifierOrcid_5,PersonAuthorFirstName_6,PersonAuthorLastName_6,PersonAuthorFirstName_7,PersonAuthorLastName_7,PersonAuthorFirstName_8,PersonAuthorLastName_8,PersonAuthorIdentifierOrcid_8,PersonAuthorFirstName_9,PersonAuthorLastName_9,PersonAuthorIdentifierOrcid_9,PersonAuthorFirstName_10,PersonAuthorLastName_10,PersonAuthorIdentifierOrcid_10,PersonAuthorFirstName_11,PersonAuthorLastName_11,PersonAuthorFirstName_12,PersonAuthorLastName_12,PersonAuthorFirstName_13,PersonAuthorLastName_13,PersonAuthorIdentifierOrcid_13,PersonAuthorFirstName_14,PersonAuthorLastName_14,PublisherName,TitleMain_1,Language,TitleParent_1,PageFirst,PageLast,Volume,PublishedYear,IdentifierIssn,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="date_peer_review">29.12.2025</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Bruno Ferrari</author>
    <author>Andrea Fantin</author>
    <author>D. Said</author>
    <author>A. N. Fitch</author>
    <author>Patricia Suárez Ocano</author>
    <author>Tatiana Mishurova</author>
    <author>Ilaria Roveda</author>
    <author>Arne Kromm</author>
    <author>Reza Darvishi Kamachali</author>
    <author>Giovanni Bruno</author>
    <author>Alexander Evans</author>
    <author>G. Requena</author>
    <author>Leonardo Agudo Jácome</author>
    <author>Itziar Serrano Munoz</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Inconel 718</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Synchrotron x-ray diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Heat treatment</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Cellular microstructure</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">5.5 Materialmodellierung</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">5.0 Abteilungsleitung und andere</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/65095/Ferrari_impact_of_scanning_stratgy_on_cell_structures.pdf</file>
  </doc>
  <doc>
    <id>54676</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Manufacturing a safer world: Diffraction based residual stress analysis for metal additive manufacturing</title>
    <abstract language="eng">Metal Additive Manufacturing (AM) technologies such as Laser Powder Bed Fusion (LPBF) are characterized by layer wise construction, which enable advancements of component design, with associated potential gains in performance and efficiency. However, high magnitude residual stresses (RS) are often a product of the rapid thermal cycles typical of the layerwise process.  Therefore, a deep understanding of the formation of RS, the influence of process parameters on their magnitude and the impact on mechanical performance is crucial for widespread application. The experimental characterisation of these RS is essential for safety related engineering application and supports the development of reliable numerical models. Diffraction-based methods for RS analysis using neutrons and high energy X-rays enable non-destructive spatially resolved characterisation of both surface and bulk residual stresses in complex components. This presentation will provide an overview of recent research by the BAM at large scale facilities for the characterization of residual stresses in LPBF metallic alloys as a function of process parameters. In addition, the challenges posed by the textured and hierarchical microstructures of LPBF materials on diffraction-based RS analysis in AM materials will be discussed. This will include the question of the d0 reference lattice spacing and the appropriate choice of the diffraction elastic constants (DECs) to calculate the level of RS in LPBF manufactured alloys.</abstract>
    <enrichment key="eventName">11th INternational Conference on Residual Stress (ICRS11)</enrichment>
    <enrichment key="eventPlace">Online meeting</enrichment>
    <enrichment key="eventStart">28.03.2021</enrichment>
    <enrichment key="eventEnd">30.03.2021</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Alexander Evans</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress analysis</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>X-ray diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>54106</id>
    <completedYear/>
    <publishedYear>2021</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Ageing behaviour of laser powder bed fused 316L: a powder to failure approach</title>
    <abstract language="eng">Laser powder bed fusion (LPBF) is an additive manufacturing process for materials which inherently tends to yield various degrees of metastable hierarchical microstructures, defects and high residual stresses in the as-built condition depending on the process parameters. The understanding of the evolution of these typical features during heat treatment and subsequent thermal and mechanical ageing is crucial for the wider acceptance for safety critical structures. A multi-disciplinary research project at BAM studying the development of the microstructure, defects, residual stresses typical of LPBF 316L and their evolution during thermal and mechanical ageing has led to insights into the stability of these inherent features. This presentation aims to give a broad overview of the project with a few specific cases of investigation. Firstly, the formation of residual stresses, the nature of the initial microstructure, the tensile properties and a modelling approach to understand the anisotropy will be presented. This will be followed by examples of studies of their evolution during heat treatment, long term thermal exposure, and room temperature and high temperature mechanical testing compared to a baseline of conventional wrought variant of the same alloy.</abstract>
    <enrichment key="eventName">International Conference on Additive Manufacturing 2021 (ICAM 2021)</enrichment>
    <enrichment key="eventPlace">Online meeting</enrichment>
    <enrichment key="eventStart">01.11.2021</enrichment>
    <enrichment key="eventEnd">05.11.2021</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Alexander Evans</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Ageing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">5.5 Materialmodellierung</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>55584</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>15036</pageFirst>
    <pageLast>15058</pageLast>
    <pageNumber/>
    <edition/>
    <issue>57</issue>
    <volume>2022</volume>
    <type>article</type>
    <publisherName>Springer Science + Business Media B.V.</publisherName>
    <publisherPlace>Dordrecht</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Understanding the impact of texture on the micromechanical anisotropy of laser powder bed fused Inconel 718</title>
    <abstract language="eng">The manufacturability of metallic alloys using laser-based additive manufacturing methods such as laser powder bed fusion has substantially improved within the last decade. However, local melting and solidification cause hierarchically structured and crystallographically textured microstructures possessing large residual stress. Such microstructures are not only the origin of mechanical anisotropy but also pose metrological challenges for the diffraction-based residual stress determination. Here we demonstrate the influence of the build orientation and the texture on the microstructure and consequently the mechanical anisotropy of as-built Inconel 718. For this purpose, we manufactured specimens with [001]/[011]-, [001]- and [011]/[111]-type textures along their loading direction. In addition to changes in the Young’s moduli, the differences in the crystallographic textures result in variations of the yield and ultimate tensile strengths. With this in mind, we studied the anisotropy on the micromechanical scale by subjecting the specimens to tensile loads along the different texture directions during in situ neutron diffraction experiments. In this context, the response of multiple lattice planes up to a tensile strain of 10% displayed differences in the load partitioning and the residual strain accumulation for the specimen with [011]/[111]-type texture. However, the relative behavior of the specimens possessing an [001]/[011]- and [001]-type texture remained qualitatively similar. The consequences on the metrology of residual stress determination methods are discussed.</abstract>
    <parentTitle language="eng">Journal of materials science</parentTitle>
    <identifier type="doi">10.1007/s10853-022-07499-9</identifier>
    <identifier type="issn">1573-4803</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-555840</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">29.08.2022</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Jakob Schröder</author>
    <author>Alexander Evans</author>
    <author>E. Polatidis</author>
    <author>J. Čapek</author>
    <author>Gunther Mohr</author>
    <author>Itziar Serrano-Munoz</author>
    <author>Giovanni Bruno</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron backscatter diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Tensile testing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffraction</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/55584/Understanding the impact of texture on the micromechanical anisotropy of L-PBF Inconel 718.pdf</file>
  </doc>
  <doc>
    <id>57833</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1076</pageFirst>
    <pageLast>1090</pageLast>
    <pageNumber/>
    <edition/>
    <issue>Pt 4</issue>
    <volume>56</volume>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Texture-based residual stress analysis of laser powder bed fused Inconel 718 parts</title>
    <abstract language="eng">Although layer-based additive manufacturing methods such as laser powder bed fusion (PBF-LB) offer an immense geometrical freedom in design, they are typically subject to a build-up of internal stress (i.e. thermal stress) during manufacturing. As a consequence, significant residual stress (RS) is retained in the final part as a footprint of these internal stresses. Furthermore, localized melting and solidification inherently induce columnar-type grain growth accompanied by crystallographic texture. Although diffraction-based methods are commonly used to determine the RS distribution in PBF-LB parts, such features pose metrological challenges in their application. In theory, preferred grain orientation invalidates the hypothesis of isotropic material behavior underlying the common methods to determine RS. In this work, more refined methods are employed to determine RS in PBF-LB/M/IN718 prisms, based on crystallographic texture data. In fact, the employment of direction-dependent elastic constants (i.e. stress factors) for the calculation of RS results in insignificant differences from conventional approaches based on the hypothesis of isotropic mechanical properties. It can be concluded that this result is directly linked to the fact that the {311} lattice planes typically used for RS analysis in nickel-based alloys have high multiplicity and less strong texture intensities compared with other lattice planes. It is also found that the length of the laser scan vectors determines the surface RS distribution in prisms prior to their removal from the baseplate. On removal from the baseplate the surface RS considerably relaxes and/or redistributes; a combination of the geometry and the scanning strategy dictates the sub-surface RS distribution.</abstract>
    <parentTitle language="eng">Journal of Applied Crystallography</parentTitle>
    <identifier type="doi">10.1107/S1600576723004855</identifier>
    <identifier type="issn">1600-5767</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-578331</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">14.08.2023</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Jakob Schröder</author>
    <author>Alexander Evans</author>
    <author>V. Luzin</author>
    <author>G. Abreu Faria</author>
    <author>Sebastian Degener</author>
    <author>E. Polatidis</author>
    <author>J. Čapek</author>
    <author>Arne Kromm</author>
    <author>G. Dovzhenko</author>
    <author>Giovanni Bruno</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron backscattered diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Principal stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <collection role="ddc" number="543">Analytische Chemie</collection>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Chemie und Prozesstechnik</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/57833/xx5022.pdf</file>
  </doc>
  <doc>
    <id>57412</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>9</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Wiley-VCH GmbH</publisherName>
    <publisherPlace>Weinheim</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Evolution of Creep Damage of 316L Produced by Laser Powder Bed Fusion</title>
    <abstract language="eng">The damage mechanisms of metallic components produced by process laser powder bed fusion differ significantly from those typically observed in conventionally manufactured variants of the same alloy. This is due to the unique microstructures of additively manufactured materials. Herein, the focus is on the study of the evolution of creep damage in stainless steel 316L specimens produced by laser powder bed fusion. X-ray computed tomography is used to unravel the influence of the process-specific microstructure from the influence of the initial void distribution on creep damage mechanisms. The void distribution of two specimens tested at 600 °C and 650 °C is analyzed before a creep test, after an interruption, and after fracture. The results indicate that the formation of damage is not connected to the initial void distribution. Instead, damage accumulation at grain boundaries resulting from intergranular cracking is observed.</abstract>
    <parentTitle language="eng">Advanced Engineering Materials</parentTitle>
    <identifier type="doi">10.1002/adem.202201581</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-574127</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">31.05.2023</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Alexander Ulbricht</author>
    <author>Luis Ávila Calderón</author>
    <author>Konstantin Sommer</author>
    <author>Gunther Mohr</author>
    <author>Alexander Evans</author>
    <author>Birgit Skrotzki</author>
    <author>Giovanni Bruno</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Creep</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Computed Tomography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PBF-LB/M/316L</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed Fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AISI 316L</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/57412/AdvEngMater_Evolution_of_Creep_Damage_of_316L_Produced_by_LPBF.pdf</file>
  </doc>
  <doc>
    <id>55786</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Entwicklung der Mikrostruktur der mechanischen Eigenschaften und der Eigenspannungen in L-PBF 316L</title>
    <abstract language="deu">Die additive Fertigung (AM) metallischer Werkstoffe mittels Laser Powder Bed Fusion (L-PBF) ermöglicht einzigartige hierarchische Mikrostrukturen, die zu Verbesserungen bestimmter mechanischer Eigenschaften gegenüber konventionell hergestellten Varianten derselben Legierung führen können.  Allerdings ist das L-PBF-Verfahren häufig durch das Vorhandensein hoher Eigenspannungen gekennzeichnet, die es zu verstehen und zu mindern gilt.  Daher ist das Verständnis der Mikrostrukturen, der Eigenspannungen und der daraus resultierenden mechanischen Eigenschaften entscheidend für eine breite Akzeptanz bei sicherheitskritischen Anwendungen.  Die BAM hat ein multidisziplinäres Forschungsprogramm gestartet, um diese Aspekte bei LPBF 316L zu untersuchen. Der vorliegende Beitrag stellt einige der wichtigsten Ergebnisse vor: der Einfluss von Prozessparametern auf die Mikrostruktur, der Einfluss von Mikrostruktur und Textur auf die Festigkeit, Kriechverhalten und Schädigung und die Stabilität von Eigenspannungen und Mikrostruktur unter Wärmebehandlungsbedingungen.</abstract>
    <enrichment key="eventName">DGM 3. Fachtagung Werkstoffe und Additive Fertigung</enrichment>
    <enrichment key="eventPlace">Dresden, Germany</enrichment>
    <enrichment key="eventStart">11.05.2022</enrichment>
    <enrichment key="eventEnd">13.05.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Alexander Evans</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Mechanische Eigenschaften</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Additive Fertigung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>L-PBF 316L</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Entwicklung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Mikrostruktur</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Eigenspannung</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">5.5 Materialmodellierung</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>56376</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Texture Dependent Micromechanical Anisotropy of Laser Powder Bed Fused Inconel 718</title>
    <abstract language="eng">Additive manufacturing methods such as laser powder bed fusion (LPBF) allow geometrically complex parts to be manufactured within a single step. However, as an aftereffect of the localized heat input, the rapid cooling rates are the origin of the large residual stress (RS) retained in as-manufactured parts. With a view on the microstructure, the rapid directional cooling leads to a cellular solidification mode which is accompanied by columnar grown grains possessing crystallographic texture. The solidification conditions can be controlled by the processing parameters and the scanning strategy. Thus, the process allows one to tailor the microstructure and the texture to the specific needs. Yet, such microstructures are not only the origin of the mechanical anisotropy but also pose metrological challenges for the diffraction-based RS determination. In that context the micromechanical elastic anisotropy plays an important role: it translates the measured microscopic strain to macroscopic stress. Therefore, it is of uttermost importance to understand the influence of the hierarchical microstructures and the texture on the elastic anisotropy of LPBF manufactured materials.&#13;
This study reveals the influence of the build orientation and the texture on the micro-mechanical anisotropy of as-built Inconel 718. Through variations of the build orientation and the scanning strategy, we manufactured specimens possessing [001]/[011]-, [001]-, and [011]/[111]-type textures. The resulting microstructures lead to differences in the macroscopic mechanical properties. Even further, tensile in-situ loading experiments during neutron diffraction measurements along the different texture components revealed differences in the microstrain response of multiple crystal lattice planes. In particular, the load partitioning and the residual strain accumulation among the [011]/[111] textured specimen displayed distinct differences measured up to a macroscopic strain of 10 %. However, the behavior of the specimens possessing [001]/[011]-and [001]-type texture was only minorly affected. The consequences on the metrology of RS analysis by diffraction-based methods are discussed.</abstract>
    <enrichment key="eventName">International Conference on Additive Manufacturing ICAM 2022</enrichment>
    <enrichment key="eventPlace">Orlando, FL, USA</enrichment>
    <enrichment key="eventStart">31.10.2022</enrichment>
    <enrichment key="eventEnd">04.11.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Jakob Schröder</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron backscatter diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Mechanical behavior</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>56804</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Fundamentals of diffraction-based residual stress and texture analysis of PBF-LB Inconel 718</title>
    <abstract language="eng">Laser powder bed fusion (PBF-LB/M) of metallic alloys is a layer wise additive manufacturing process which provides significant scope for more efficient designs of components, benefiting performance and weight, leading to efficiency improvements for various sectors of industry. However, to benefit from these design freedoms, knowledge of the high produced induced residual stress and mechanical property anisotropy associated with the unique microstructures is critical. X-ray and neutron diffraction are considered the benchmark for non-destructive characterization of surface and bulk internal residual stress. The latter, characterized by the high penetration power in most engineering alloys, allows for the use of diffraction angle close to 90° enabling a near cubic sampling volume to be specified. However, the complex microstructures of columnar growth with inherent crystallographic texture typically produced during PBF-LB/M of metallics present significant challenges to the assumptions typically required for time efficient determination of residual stress. These challenges include the selection of an appropriate set of diffraction elastic constants and a representative strain-free reference for the material of interest. In this presentation advancements in the field of diffraction-based residual stress analysis of L-PBF Inconel 718 will be presented. The choice of an appropriate set of diffraction-elastic constants depending on the underlying microstructure will be described.</abstract>
    <enrichment key="eventName">MLZ User Meeting 2022</enrichment>
    <enrichment key="eventPlace">Munich, Germany</enrichment>
    <enrichment key="eventStart">08.12.2022</enrichment>
    <enrichment key="eventEnd">09.12.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="InvitedTalks">1</enrichment>
    <author>Jakob Schröder</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual Stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Texture</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Mechanical behavior</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>59931</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>17</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Wiley</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature</title>
    <abstract language="eng">This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.</abstract>
    <parentTitle language="eng">Advanced Engineering Materials</parentTitle>
    <identifier type="doi">10.1002/adem.202302122</identifier>
    <identifier type="issn">1527-2648</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-599316</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="opus_import_data">{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,4,19]],"date-time":"2024-04-19T01:05:00Z","timestamp":1713488700891},"reference-count":43,"publisher":"Wiley","license":[{"start":{"date-parts":[[2024,4,17]],"date-time":"2024-04-17T00:00:00Z","timestamp":1713312000000},"content-version":"vor","delay-in-days":0,"URL":"http:\/\/creativecommons.org\/licenses\/by\/4.0\/"}],"content-domain":{"domain":["onlinelibrary.wiley.com"],"crossmark-restriction":true},"short-container-title":["Adv Eng Mater"],"abstract":"&lt;jats:p&gt;This study investigates the room\u2010 and high\u2010temperature (650\u2009\u00b0C) tensile and low\u2010cycle\u2010fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF\u2010LB\/M) with a four\u2010step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF\u2010LB\/M variant at room temperature is slightly lower than that of the wrought material, while at 650\u2009\u00b0C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (\u22650.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF\u2010LB\/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local  crystallite clusters.&lt;\/jats:p&gt;","DOI":"10.1002\/adem.202302122","type":"journal-article","created":{"date-parts":[[2024,2,3]],"date-time":"2024-02-03T02:39:35Z","timestamp":1706927975000},"update-policy":"http:\/\/dx.doi.org\/10.1002\/crossmark_policy","source":"Crossref","is-referenced-by-count":0,"title":["Tensile and Low\u2010Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature"],"prefix":"10.1002","author":[{"ORCID":"http:\/\/orcid.org\/0000-0002-9115-5475","authenticated-orcid":false,"given":"Nadja","family":"Sonntag","sequence":"first","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"given":"Benjamin","family":"Piesker","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-0012-2414","authenticated-orcid":false,"given":"Luis Alexander","family":"\u00c1vila Calder\u00f3n","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0009-0009-9763-9137","authenticated-orcid":false,"given":"Gunther","family":"Mohr","sequence":"additional","affiliation":[{"name":"Component Safety Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0002-9189-1595","authenticated-orcid":false,"given":"Birgit","family":"Rehmer","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0001-8839-8815","authenticated-orcid":false,"given":"Leonardo","family":"Agudo J\u00e1come","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0001-8875-6547","authenticated-orcid":false,"given":"Kai","family":"Hilgenberg","sequence":"additional","affiliation":[{"name":"Component Safety Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0002-0365-8639","authenticated-orcid":false,"given":"Alexander","family":"Evans","sequence":"additional","affiliation":[{"name":"Non\u2010Destructive Testing Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-0727-5499","authenticated-orcid":false,"given":"Birgit","family":"Skrotzki","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]}],"member":"311","published-online":{"date-parts":[[2024,4,17]]},"reference":[{"key":"e_1_2_8_2_1","doi-asserted-by":"publisher","DOI":"10.1007\/978-3-319-58205-4"},{"key":"e_1_2_8_3_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.actamat.2021.117240"},{"key":"e_1_2_8_4_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.pmatsci.2017.10.001"},{"key":"e_1_2_8_5_1","unstructured":"B.Merz K.Poka R.Nilsson G.Mohr K.Hilgenberg in Lasers in Manufacturing (LiM) 2023 WLT 1."},{"key":"e_1_2_8_6_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.mser.2020.100596"},{"key":"e_1_2_8_7_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.pmatsci.2022.101051"},{"key":"e_1_2_8_8_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.msea.2016.05.089"},{"key":"e_1_2_8_9_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.matchar.2019.01.028"},{"key":"e_1_2_8_10_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.pmatsci.2023.101108"},{"key":"e_1_2_8_11_1","first-page":"20","volume":"6","author":"Schneider J.","year":"2022","journal-title":"J. Manuf. Mater. Process."},{"key":"e_1_2_8_12_1","doi-asserted-by":"publisher","DOI":"10.1007\/s10853-022-07499-9"},{"key":"e_1_2_8_13_1","doi-asserted-by":"crossref","first-page":"270","DOI":"10.1007\/s11661-022-06867-z","volume":"54","author":"Sharma S.","year":"2023","journal-title":"Metall. Mater. Trans. A"},{"key":"e_1_2_8_14_1","doi-asserted-by":"crossref","first-page":"1897","DOI":"10.3390\/met11121897","volume":"11","author":"Mukhopadhyay S.","year":"2021","journal-title":"Metals"},{"key":"e_1_2_8_15_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.msea.2011.10.014"},{"key":"e_1_2_8_16_1","doi-asserted-by":"crossref","first-page":"281","DOI":"10.7449\/1994\/Superalloys_1994_281_291","volume-title":"Superalloys 718, 625, 706 and Various Derivatives","author":"Desvall\u00e9es Y.","year":"1994"},{"key":"e_1_2_8_17_1","doi-asserted-by":"crossref","first-page":"545","DOI":"10.7449\/1994\/Superalloys_1994_545_555","volume-title":"Superalloys 718, 625, 706 and Various Derivatives","author":"Li S.","year":"1994"},{"key":"e_1_2_8_18_1","doi-asserted-by":"crossref","unstructured":"B.Rehmer F.Bayram L. A.\u00c1vila Calder\u00f3n G.Mohr B.Skrotzki. BAM reference data: Temperature\u2010dependent Young's and shear modulus data for additively and conventionally manufactured variants of Ni\u2010based alloy Inconel IN718. Zenodo 2023.","DOI":"10.1038\/s41597-023-02387-6"},{"key":"e_1_2_8_19_1","volume-title":"Standard for Additive Manufacturing \u2013 Post Processing Methods \u2013 Standard Specification for Thermal Post\u2010Processing Metal Parts Made Via Powder Bed Fusion","author":"ASTM F 3301a","year":"2018"},{"key":"e_1_2_8_20_1","volume-title":"Nickel Alloy, Corrosion\u2010 and Heat\u2010Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings, 52.5Ni \u2013 19Cr \u2013 3.0Mo \u2013 5.1Cb (Nb) \u2013 0.90Ti \u2013 0.50Al \u2013 18Fe, Consumable Electrode or Vacuum Induction Melted, 1775\u2009\u00b0F (968\u2009\u00b0C) Solution and Precipitation Heat Treated","author":"SAE AMS 5663P","year":"2022"},{"key":"e_1_2_8_21_1","volume-title":"Standard Specification for Precipitation\u2010Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service","author":"ASTM B 637","year":"2018"},{"key":"e_1_2_8_22_1","volume-title":"Metallische Werkstoffe \u2013 Zugversuch \u2013 Teil 1: Pr\u00fcfverfahren bei Raumtemperatur","author":"ISO 6892\u20101","year":"2019"},{"key":"e_1_2_8_23_1","volume-title":"Metallische Werkstoffe \u2013 Zugversuch \u2013 Teil 2: Pr\u00fcfverfahren bei Erh\u00f6hter Temperatur","author":"ISO 6892\u20102","year":"2018"},{"key":"e_1_2_8_24_1","volume-title":"Metallische Werkstoffe \u2013 Erm\u00fcdungspr\u00fcfung \u2013 Einachsige Pr\u00fcfung mit der Dehnungskontrollierten Methode","author":"ISO 12106","year":"2017"},{"key":"e_1_2_8_25_1","volume-title":"Metallische Werkstoffe \u2013 Kalibrierung von L\u00e4ngen\u00e4nderungs\u2010Messeinrichtungen f\u00fcr die Pr\u00fcfung mit Einachsiger Beanspruchung (ISO 9513:2012 + Cor. 1:2013); Deutsche Fassung EN ISO 9513:2012","author":"DIN EN ISO 9513","year":"2013"},{"key":"e_1_2_8_26_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.msea.2020.140154"},{"key":"e_1_2_8_27_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.msea.2021.142223"},{"key":"e_1_2_8_28_1","volume-title":"Microbeam Analysis \u2013 Electron Backscatter Diffraction \u2013 Measurement of Average Grain Size","author":"DIN ISO 13067","year":"2021"},{"key":"e_1_2_8_29_1","doi-asserted-by":"publisher","DOI":"10.1002\/adem.202201581"},{"key":"e_1_2_8_30_1","doi-asserted-by":"publisher","DOI":"10.1002\/adem.202300819"},{"key":"e_1_2_8_31_1","doi-asserted-by":"crossref","first-page":"474","DOI":"10.1038\/s41597-023-02387-6","volume":"10","author":"Rehmer B.","year":"2023","journal-title":"Sci. Data"},{"key":"e_1_2_8_32_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.actamat.2018.08.028"},{"key":"e_1_2_8_33_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.matdes.2021.110246"},{"key":"e_1_2_8_34_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.matdes.2020.108481"},{"key":"e_1_2_8_35_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.addma.2021.101875"},{"key":"e_1_2_8_36_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.addma.2021.102347"},{"key":"e_1_2_8_37_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.matlet.2015.10.136"},{"key":"e_1_2_8_38_1","doi-asserted-by":"publisher","DOI":"10.1016\/0001-6160(88)90139-3"},{"key":"e_1_2_8_39_1","doi-asserted-by":"publisher","DOI":"10.1007\/BF02667395"},{"key":"e_1_2_8_40_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.scriptamat.2004.11.023"},{"key":"e_1_2_8_41_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.ijfatigue.2020.105598"},{"key":"e_1_2_8_42_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.ijplas.2019.09.010"},{"key":"e_1_2_8_43_1","volume-title":"Fatigue of Materials","author":"Suresh S.","year":"2004"},{"key":"e_1_2_8_44_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.addma.2022.103301"}],"container-title":["Advanced Engineering Materials"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/onlinelibrary.wiley.com\/doi\/pdf\/10.1002\/adem.202302122","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2024,4,18]],"date-time":"2024-04-18T06:00:20Z","timestamp":1713420020000},"score":1,"resource":{"primary":{"URL":"https:\/\/onlinelibrary.wiley.com\/doi\/10.1002\/adem.202302122"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2024,4,17]]},"references-count":43,"alternative-id":["10.1002\/adem.202302122"],"URL":"http:\/\/dx.doi.org\/10.1002\/adem.202302122","archive":["Portico"],"relation":{},"ISSN":["1438-1656","1527-2648"],"issn-type":[{"value":"1438-1656","type":"print"},{"value":"1527-2648","type":"electronic"}],"subject":[],"published":{"date-parts":[[2024,4,17]]},"assertion":[{"value":"2023-12-11","order":0,"name":"received","label":"Received","group":{"name":"publication_history","label":"Publication History"}},{"value":"2024-04-17","order":2,"name":"published","label":"Published","group":{"name":"publication_history","label":"Publication History"}}]}}</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">06.05.2024</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Nadja Sonntag</author>
    <author>Benjamin Piesker</author>
    <author>Luis Ávila Calderón</author>
    <author>Gunther Mohr</author>
    <author>Birgit Rehmer</author>
    <author>Leonardo Agudo Jácome</author>
    <author>Kai Hilgenberg</author>
    <author>Alexander Evans</author>
    <author>Birgit Skrotzki</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fatigue damage</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Heat treatment</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Inconel 718</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Low-cycle fatigue</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Tensile strength</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/59931/Adv_Eng_Mater_2024_2302122.pdf</file>
  </doc>
  <doc>
    <id>63456</id>
    <completedYear/>
    <publishedYear>2025</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Creep Behavior of Stainless Steel 316L Manufactured by Laser Powder Bed Fusion</title>
    <abstract language="eng">The broader industrial adoption of metal AM in safety-critical applications is limited, among others, by the still in-sufficient understanding of process–structure–property relationships and a lack of reliable mate-rial data. The content presented here approaches this limitation regarding the creep behavior of one of the most studied AM alloys: PBF-LB/M/316L stainless steel. A nearly as-built and a condition heat treated at 900 °C for 1 h, along with a conventionally manufactured variant are investigated. The creep behavior until reaching the minimum creep rate is mainly determined by the solidification cell structure. The damage is overall mainly intergranular, independent of the heat treated condition. The heat treatment at 900 °C for 1 h partially influenced the microstructure (mainly in terms of cell&#13;
structure). The creep behavior until reaching the minimum creep rate remained nearly unchanged. The creep lifetime and ductility were enhanced. The crystallographic texture evolved after creep deformation.</abstract>
    <enrichment key="eventName">TMS 2025 Annual Meeting &amp; Exhibition</enrichment>
    <enrichment key="eventPlace">Las Vegas, NV, USA</enrichment>
    <enrichment key="eventStart">23.03.2025</enrichment>
    <enrichment key="eventEnd">27.03.2025</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Luis Ávila Calderón</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Creep</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>316L</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>51176</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>14645</pageFirst>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>1</issue>
    <volume>10</volume>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">The residual stress in as‑built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure</title>
    <abstract language="eng">The effect of two types of scanning strategies on the grain structure and build-up of Residual Stress (RS) has been investigated in an as-built IN718 alloy produced by Laser Powder Bed Fusion (LPBF). The RS state has been investigated by X-ray diffraction techniques. The microstructural characterization was performed principally by Electron Backscatter Diffraction (EBSD), where the application of a post-measurement refinement technique enables small misorientations (&lt; 2°) to be resolved. Kernel average misorientation (KAM) distributions indicate that preferably oriented columnar grains contain higher levels of misorientation, when compared to elongated grains with lower texture. The KAM distributions combined with X-ray diffraction stress maps infer that the increased misorientation is induced via plastic deformation driven by the thermal stresses, acting to self-relieve stress. The possibility of obtaining lower RS states in the build direction as a consequence of the influence of the microstructure should be considered when envisaging scanning strategies aimed at the mitigation of RS.</abstract>
    <parentTitle language="eng">Scientific reports</parentTitle>
    <identifier type="doi">10.1038/s41598-020-71112-9</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-511769</identifier>
    <enrichment key="date_peer_review">14.09.2020</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Itziar Serrano-Munoz</author>
    <author>Tatiana Mishurova</author>
    <author>Tobias Thiede</author>
    <author>Maximilian Sprengel</author>
    <author>Arne Kromm</author>
    <author>Naresh Nadammal</author>
    <author>Gert Nolze</author>
    <author>Romeo Saliwan Neumann</author>
    <author>Alexander Evans</author>
    <author>Giovanni Bruno</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>LPBF</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Inconel 718</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Kernel average misorientation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Texture</value>
    </subject>
    <collection role="ddc" number="62">Ingenieurwissenschaften</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/51176/Serrano_etal_SciRep.pdf</file>
  </doc>
</export-example>
