<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>54676</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Manufacturing a safer world: Diffraction based residual stress analysis for metal additive manufacturing</title>
    <abstract language="eng">Metal Additive Manufacturing (AM) technologies such as Laser Powder Bed Fusion (LPBF) are characterized by layer wise construction, which enable advancements of component design, with associated potential gains in performance and efficiency. However, high magnitude residual stresses (RS) are often a product of the rapid thermal cycles typical of the layerwise process.  Therefore, a deep understanding of the formation of RS, the influence of process parameters on their magnitude and the impact on mechanical performance is crucial for widespread application. The experimental characterisation of these RS is essential for safety related engineering application and supports the development of reliable numerical models. Diffraction-based methods for RS analysis using neutrons and high energy X-rays enable non-destructive spatially resolved characterisation of both surface and bulk residual stresses in complex components. This presentation will provide an overview of recent research by the BAM at large scale facilities for the characterization of residual stresses in LPBF metallic alloys as a function of process parameters. In addition, the challenges posed by the textured and hierarchical microstructures of LPBF materials on diffraction-based RS analysis in AM materials will be discussed. This will include the question of the d0 reference lattice spacing and the appropriate choice of the diffraction elastic constants (DECs) to calculate the level of RS in LPBF manufactured alloys.</abstract>
    <enrichment key="eventName">11th INternational Conference on Residual Stress (ICRS11)</enrichment>
    <enrichment key="eventPlace">Online meeting</enrichment>
    <enrichment key="eventStart">28.03.2021</enrichment>
    <enrichment key="eventEnd">30.03.2021</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Alexander Evans</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress analysis</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>X-ray diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>51937</id>
    <completedYear/>
    <publishedYear>2021</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>121</volume>
    <type>article</type>
    <publisherName>Elsevier</publisherName>
    <publisherPlace>Amsterdam</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges</title>
    <abstract language="eng">This article is an outcome of a workshop on Fatigue of Additive Manufactured Metallic Components jointly organized by the Federal Institute for Materials Research and Testing (BAM) Berlin, Germany and the National Institute of Standards and Technology (NIST) Boulder, CO, U.S.A. The aim of the workshop was a comprehensive discussion of the specific aspects of additively manufactured (AM) components in regard to failure under cyclic loading. Undoubtedly, a better understanding and the further development of approaches for damage tolerant component design of AM parts are among the most significant challenges currently facing the use of these new technologies.&#13;
This article presents a thorough overview of the workshop discussions. It aims to provide a review of the parameters affecting the damage tolerance of AM parts with special emphasis on the process parameters intrinsic to the AM technologies, the resulting defects and residual stresses. Based on these aspects, concepts for damage tolerant component design for AM are reviewed and critically discussed.</abstract>
    <parentTitle language="eng">Progress in materials science</parentTitle>
    <identifier type="issn">0079-6425</identifier>
    <identifier type="doi">10.1016/j.pmatsci.2021.100786</identifier>
    <enrichment key="date_peer_review">12.08.2021</enrichment>
    <author>Uwe Zerbst</author>
    <author>Giovanni Bruno</author>
    <author>J.-Y. Buffière</author>
    <author>T. Wegener</author>
    <author>T. Niendorf</author>
    <author>T. Wu</author>
    <author>X. Zhang</author>
    <author>N. Kashaev</author>
    <author>G. Meneghetti</author>
    <author>Nik Hrabe</author>
    <author>Mauro Madia</author>
    <author>Tiago Werner</author>
    <author>Kai Hilgenberg</author>
    <author>M. Koukolikova</author>
    <author>R. Prochazka</author>
    <author>J. Dzugan</author>
    <author>B. Möller</author>
    <author>S. Beretta</author>
    <author>Alexander Evans</author>
    <author>R. Wagener</author>
    <author>K. Schnabel</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fatigue loading</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Component assessment</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Damage tolerance</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Defects</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stresses</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>52582</id>
    <completedYear/>
    <publishedYear>2021</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>709</pageFirst>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>5</issue>
    <volume>11</volume>
    <type>article</type>
    <publisherName>MDPI</publisherName>
    <publisherPlace>Basel</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Towards a Methodology for Component Design of Metallic AM Parts Subjected to Cyclic Loading</title>
    <abstract language="eng">The safe fatigue design of metallic components fabricated by additive manufacturing (AM) is still a largely unsolved problem. This is primarily due to (a) a significant inhomogeneity of the material properties across the component; (b) defects such as porosity and lack of fusion as well as pronounced surface roughness of the asuilt components; and (c) residual stresses, which are very often present in the as‐built parts and need to be removed by post‐fabrication treatments. Such morphological and microstructural features are very different than in conventionally manufactured parts and play a much bigger role in determining the fatigue life. The above problems require specific solutions with respect to the identification of the critical (failure) sites in AM fabricated components. Moreover, the generation of representative test specimens characterized by similar temperature cycles needs to be guaranteed if one wants to reproducibly identify the critical sites and establish fatigue assessment methods taking into account the effect of defects on crack initiation and early propagation. The latter requires fracture mechanics‐based approaches which, unlike common methodologies, cover the specific characteristics of so‐called short fatigue cracks. This paper provides a discussion of all these aspects with special focus on components manufactured by laser powder bed fusion (L‐PBF). It shows how to adapt existing solutions, identifies fields where there are still gaps, and discusses proposals for potential improvement of the damage tolerance design of L‐PBF components</abstract>
    <parentTitle language="eng">Metals</parentTitle>
    <identifier type="doi">10.3390/met11050709</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-525822</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">05.07.2021</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Uwe Zerbst</author>
    <author>Mauro Madia</author>
    <author>Giovanni Bruno</author>
    <author>Kai Hilgenberg</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>L‐PBF</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fatigue</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fracture</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Defects</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/52582/Methology for Damage Tolerance of AM Metals.pdf</file>
  </doc>
  <doc>
    <id>52877</id>
    <completedYear/>
    <publishedYear>2021</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1012</pageFirst>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue>7</issue>
    <volume>11</volume>
    <type>article</type>
    <publisherName>MDPI</publisherName>
    <publisherPlace>Basel</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Can Potential Defects in LPBF Be Healed from the Laser Exposure of Subsequent Layers? A Quantitative Study</title>
    <abstract language="eng">Additive manufacturing (AM) of metals and in particular laser powder bed fusion (LPBF) enables a degree of freedom in design unparalleled by conventional subtractive methods. To ensure that the designed precision is matched by the produced LPBF parts, a full understanding of the interaction between the laser and the feedstock powder is needed. It has been shown that the laser also melts subjacent layers of material underneath. This effect plays a key role when designing small cavities or overhanging structures, because, in these cases, the material underneath is feed-stock powder. In this study, we quantify the extension of the melt pool during laser illumination of powder layers and the defect spatial distribution in a cylindrical specimen. During the LPBF process, several layers were intentionally not exposed to the laser beam at various locations, while the build process was monitored by thermography and optical tomography. The cylinder was finally scanned by X-ray computed tomography (XCT). To correlate the positions of the unmolten layers in the part, a staircase was manufactured around the cylinder for easier registration. The results show that healing among layers occurs if a scan strategy is applied, where the orientation of the hatches is changed for each subsequent layer. They also show that small pores and surface roughness of solidified material below a thick layer of unmolten material (&gt;200 µm) serve as seeding points for larger voids. The orientation of the first two layers fully exposed after a thick layer of unmolten powder shapes the orientation of these voids, created by a lack of fusion.</abstract>
    <parentTitle language="eng">Metals</parentTitle>
    <identifier type="doi">10.3390/met11071012</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-528778</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">05.08.2021</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Alexander Ulbricht</author>
    <author>Gunther Mohr</author>
    <author>Simon Altenburg</author>
    <author>Simon Oster</author>
    <author>Christiane Maierhofer</author>
    <author>Giovanni Bruno</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Computed tomography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed Fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>In situ monitoring</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>infrared Thermography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Optical Tomography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AISI 316L</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">8.3 Thermografische Verfahren</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/52877/metals-11-01012.pdf</file>
  </doc>
  <doc>
    <id>54106</id>
    <completedYear/>
    <publishedYear>2021</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Ageing behaviour of laser powder bed fused 316L: a powder to failure approach</title>
    <abstract language="eng">Laser powder bed fusion (LPBF) is an additive manufacturing process for materials which inherently tends to yield various degrees of metastable hierarchical microstructures, defects and high residual stresses in the as-built condition depending on the process parameters. The understanding of the evolution of these typical features during heat treatment and subsequent thermal and mechanical ageing is crucial for the wider acceptance for safety critical structures. A multi-disciplinary research project at BAM studying the development of the microstructure, defects, residual stresses typical of LPBF 316L and their evolution during thermal and mechanical ageing has led to insights into the stability of these inherent features. This presentation aims to give a broad overview of the project with a few specific cases of investigation. Firstly, the formation of residual stresses, the nature of the initial microstructure, the tensile properties and a modelling approach to understand the anisotropy will be presented. This will be followed by examples of studies of their evolution during heat treatment, long term thermal exposure, and room temperature and high temperature mechanical testing compared to a baseline of conventional wrought variant of the same alloy.</abstract>
    <enrichment key="eventName">International Conference on Additive Manufacturing 2021 (ICAM 2021)</enrichment>
    <enrichment key="eventPlace">Online meeting</enrichment>
    <enrichment key="eventStart">01.11.2021</enrichment>
    <enrichment key="eventEnd">05.11.2021</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Alexander Evans</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Ageing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">5.5 Materialmodellierung</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>55584</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>15036</pageFirst>
    <pageLast>15058</pageLast>
    <pageNumber/>
    <edition/>
    <issue>57</issue>
    <volume>2022</volume>
    <type>article</type>
    <publisherName>Springer Science + Business Media B.V.</publisherName>
    <publisherPlace>Dordrecht</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Understanding the impact of texture on the micromechanical anisotropy of laser powder bed fused Inconel 718</title>
    <abstract language="eng">The manufacturability of metallic alloys using laser-based additive manufacturing methods such as laser powder bed fusion has substantially improved within the last decade. However, local melting and solidification cause hierarchically structured and crystallographically textured microstructures possessing large residual stress. Such microstructures are not only the origin of mechanical anisotropy but also pose metrological challenges for the diffraction-based residual stress determination. Here we demonstrate the influence of the build orientation and the texture on the microstructure and consequently the mechanical anisotropy of as-built Inconel 718. For this purpose, we manufactured specimens with [001]/[011]-, [001]- and [011]/[111]-type textures along their loading direction. In addition to changes in the Young’s moduli, the differences in the crystallographic textures result in variations of the yield and ultimate tensile strengths. With this in mind, we studied the anisotropy on the micromechanical scale by subjecting the specimens to tensile loads along the different texture directions during in situ neutron diffraction experiments. In this context, the response of multiple lattice planes up to a tensile strain of 10% displayed differences in the load partitioning and the residual strain accumulation for the specimen with [011]/[111]-type texture. However, the relative behavior of the specimens possessing an [001]/[011]- and [001]-type texture remained qualitatively similar. The consequences on the metrology of residual stress determination methods are discussed.</abstract>
    <parentTitle language="eng">Journal of materials science</parentTitle>
    <identifier type="doi">10.1007/s10853-022-07499-9</identifier>
    <identifier type="issn">1573-4803</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-555840</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">29.08.2022</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Jakob Schröder</author>
    <author>Alexander Evans</author>
    <author>E. Polatidis</author>
    <author>J. Čapek</author>
    <author>Gunther Mohr</author>
    <author>Itziar Serrano-Munoz</author>
    <author>Giovanni Bruno</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron backscatter diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Tensile testing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffraction</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/55584/Understanding the impact of texture on the micromechanical anisotropy of L-PBF Inconel 718.pdf</file>
  </doc>
  <doc>
    <id>57833</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1076</pageFirst>
    <pageLast>1090</pageLast>
    <pageNumber/>
    <edition/>
    <issue>Pt 4</issue>
    <volume>56</volume>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Texture-based residual stress analysis of laser powder bed fused Inconel 718 parts</title>
    <abstract language="eng">Although layer-based additive manufacturing methods such as laser powder bed fusion (PBF-LB) offer an immense geometrical freedom in design, they are typically subject to a build-up of internal stress (i.e. thermal stress) during manufacturing. As a consequence, significant residual stress (RS) is retained in the final part as a footprint of these internal stresses. Furthermore, localized melting and solidification inherently induce columnar-type grain growth accompanied by crystallographic texture. Although diffraction-based methods are commonly used to determine the RS distribution in PBF-LB parts, such features pose metrological challenges in their application. In theory, preferred grain orientation invalidates the hypothesis of isotropic material behavior underlying the common methods to determine RS. In this work, more refined methods are employed to determine RS in PBF-LB/M/IN718 prisms, based on crystallographic texture data. In fact, the employment of direction-dependent elastic constants (i.e. stress factors) for the calculation of RS results in insignificant differences from conventional approaches based on the hypothesis of isotropic mechanical properties. It can be concluded that this result is directly linked to the fact that the {311} lattice planes typically used for RS analysis in nickel-based alloys have high multiplicity and less strong texture intensities compared with other lattice planes. It is also found that the length of the laser scan vectors determines the surface RS distribution in prisms prior to their removal from the baseplate. On removal from the baseplate the surface RS considerably relaxes and/or redistributes; a combination of the geometry and the scanning strategy dictates the sub-surface RS distribution.</abstract>
    <parentTitle language="eng">Journal of Applied Crystallography</parentTitle>
    <identifier type="doi">10.1107/S1600576723004855</identifier>
    <identifier type="issn">1600-5767</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-578331</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">14.08.2023</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Jakob Schröder</author>
    <author>Alexander Evans</author>
    <author>V. Luzin</author>
    <author>G. Abreu Faria</author>
    <author>Sebastian Degener</author>
    <author>E. Polatidis</author>
    <author>J. Čapek</author>
    <author>Arne Kromm</author>
    <author>G. Dovzhenko</author>
    <author>Giovanni Bruno</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron backscattered diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Principal stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <collection role="ddc" number="543">Analytische Chemie</collection>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Chemie und Prozesstechnik</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/57833/xx5022.pdf</file>
  </doc>
  <doc>
    <id>54941</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>21</pageLast>
    <pageNumber/>
    <edition/>
    <issue>6</issue>
    <volume>12</volume>
    <type>article</type>
    <publisherName>MDPI</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">On the Registration of Thermographic In Situ Monitoring Data and Computed Tomography Reference Data in the Scope of Defect Prediction in Laser Powder Bed Fusion</title>
    <abstract language="eng">The detection of internal irregularities is crucial for quality assessment in metal-based additive manufacturing (AM) technologies such as laser powder bed fusion (L-PBF). The utilization of in-process thermography as an in situ monitoring tool in combination with post-process X-ray micro computed tomography (XCT) as a reference technique has shown great potential for this aim. Due to the small irregularity dimensions, a precise registration of the datasets is necessary as a&#13;
requirement for correlation. In this study, the registration of thermography and XCT reference datasets of a cylindric specimen containing keyhole pores is carried out for the development of a porosity prediction model. The considered datasets show variations in shape, data type and dimensionality, especially due to shrinkage and material elevation effects present in the manufactured part. Since the resulting deformations are challenging for registration, a novel preprocessing methodology is introduced that involves an adaptive volume adjustment algorithm which is based on the porosity distribution in the specimen. Thus, the implementation of a simple three-dimensional image-to-image registration is enabled. The results demonstrate the influence of the part deformation on the resulting porosity location and the importance of registration in terms of irregularity prediction.</abstract>
    <parentTitle language="eng">Metals</parentTitle>
    <identifier type="doi">10.3390/met12060947</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-549412</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">04.07.2022</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Simon Oster</author>
    <author>Tobias Fritsch</author>
    <author>Alexander Ulbricht</author>
    <author>Gunther Mohr</author>
    <author>Giovanni Bruno</author>
    <author>Christiane Maierhofer</author>
    <author>Simon Altenburg</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Selective laser melting (SLM)</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion (L-PBF)</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing (AM)</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Process monitoring</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Infrared thermography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>X-ray computed tomography (XCT)</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Defect detection</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Image registration</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">8.3 Thermografische Verfahren</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/54941/metals-12-00947.pdf</file>
  </doc>
  <doc>
    <id>54262</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>13</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Wiley-VCH GmbH</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Triaxial Residual Stress in Laser Powder Bed Fused 316L: Effects of Interlayer Time and Scanning Velocity</title>
    <abstract language="eng">The triaxial distribution of the residual stress in laser powder bed fused austenitic steel 316L was determined by X-ray and neutron diffraction. The residual stress analysis results were linked to the thermal history of the specimens, which were manufactured with varying inter-layer-times and scanning velocities. A clear link between the in-process temperature of the specimens and the residual stress was found, based on in-situ monitoring data.</abstract>
    <parentTitle language="eng">Advanced Engineering Materials</parentTitle>
    <identifier type="doi">10.1002/adem.202101330</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-542620</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">14.02.2022</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Maximilian Sprengel</author>
    <author>Gunther Mohr</author>
    <author>Simon Altenburg</author>
    <author>Alexander Evans</author>
    <author>Itziar Serrano-Munoz</author>
    <author>Arne Kromm</author>
    <author>T. Pirling</author>
    <author>Giovanni Bruno</author>
    <author>Thomas Kannengießer</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Stainless Steel</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual Stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>X-ray and Neutron Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">8.3 Thermografische Verfahren</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/54262/ADEM_Sprengel_Inter_Layer_Time.pdf</file>
  </doc>
  <doc>
    <id>57412</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>9</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Wiley-VCH GmbH</publisherName>
    <publisherPlace>Weinheim</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Evolution of Creep Damage of 316L Produced by Laser Powder Bed Fusion</title>
    <abstract language="eng">The damage mechanisms of metallic components produced by process laser powder bed fusion differ significantly from those typically observed in conventionally manufactured variants of the same alloy. This is due to the unique microstructures of additively manufactured materials. Herein, the focus is on the study of the evolution of creep damage in stainless steel 316L specimens produced by laser powder bed fusion. X-ray computed tomography is used to unravel the influence of the process-specific microstructure from the influence of the initial void distribution on creep damage mechanisms. The void distribution of two specimens tested at 600 °C and 650 °C is analyzed before a creep test, after an interruption, and after fracture. The results indicate that the formation of damage is not connected to the initial void distribution. Instead, damage accumulation at grain boundaries resulting from intergranular cracking is observed.</abstract>
    <parentTitle language="eng">Advanced Engineering Materials</parentTitle>
    <identifier type="doi">10.1002/adem.202201581</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-574127</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">31.05.2023</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Alexander Ulbricht</author>
    <author>Luis Ávila Calderón</author>
    <author>Konstantin Sommer</author>
    <author>Gunther Mohr</author>
    <author>Alexander Evans</author>
    <author>Birgit Skrotzki</author>
    <author>Giovanni Bruno</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Creep</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Computed Tomography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PBF-LB/M/316L</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed Fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AISI 316L</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/57412/AdvEngMater_Evolution_of_Creep_Damage_of_316L_Produced_by_LPBF.pdf</file>
  </doc>
  <doc>
    <id>55786</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Entwicklung der Mikrostruktur der mechanischen Eigenschaften und der Eigenspannungen in L-PBF 316L</title>
    <abstract language="deu">Die additive Fertigung (AM) metallischer Werkstoffe mittels Laser Powder Bed Fusion (L-PBF) ermöglicht einzigartige hierarchische Mikrostrukturen, die zu Verbesserungen bestimmter mechanischer Eigenschaften gegenüber konventionell hergestellten Varianten derselben Legierung führen können.  Allerdings ist das L-PBF-Verfahren häufig durch das Vorhandensein hoher Eigenspannungen gekennzeichnet, die es zu verstehen und zu mindern gilt.  Daher ist das Verständnis der Mikrostrukturen, der Eigenspannungen und der daraus resultierenden mechanischen Eigenschaften entscheidend für eine breite Akzeptanz bei sicherheitskritischen Anwendungen.  Die BAM hat ein multidisziplinäres Forschungsprogramm gestartet, um diese Aspekte bei LPBF 316L zu untersuchen. Der vorliegende Beitrag stellt einige der wichtigsten Ergebnisse vor: der Einfluss von Prozessparametern auf die Mikrostruktur, der Einfluss von Mikrostruktur und Textur auf die Festigkeit, Kriechverhalten und Schädigung und die Stabilität von Eigenspannungen und Mikrostruktur unter Wärmebehandlungsbedingungen.</abstract>
    <enrichment key="eventName">DGM 3. Fachtagung Werkstoffe und Additive Fertigung</enrichment>
    <enrichment key="eventPlace">Dresden, Germany</enrichment>
    <enrichment key="eventStart">11.05.2022</enrichment>
    <enrichment key="eventEnd">13.05.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Alexander Evans</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Mechanische Eigenschaften</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Additive Fertigung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>L-PBF 316L</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Entwicklung</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Mikrostruktur</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Eigenspannung</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">5.5 Materialmodellierung</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>54582</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Surface and bulk residual stress in laser powder bed fused 316L: Influence of inter layer time and scanning velocity</title>
    <abstract language="eng">The influence of the inter-layer-time and the scanning velocity on the surface and bulk residual stress in laser powder bed fused 316L specimens was investigated. This study combines X-ray and neutron diffraction results with the thermal history of the specimens acquired through in-situ process monitoring. The process parameter variations were observed to directly influence the thermal history, which gave new insights in the assessment of the residual stress results.</abstract>
    <enrichment key="eventName">The 11th International Conference on Residual Stress</enrichment>
    <enrichment key="eventPlace">Nancy, Frankreich</enrichment>
    <enrichment key="eventStart">28.03.2022</enrichment>
    <enrichment key="eventEnd">30.03.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Maximilian Sprengel</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual Stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>X-ray and Neutron Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Stainless Steel</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">8.0 Abteilungsleitung und andere</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
  </doc>
  <doc>
    <id>56376</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Texture Dependent Micromechanical Anisotropy of Laser Powder Bed Fused Inconel 718</title>
    <abstract language="eng">Additive manufacturing methods such as laser powder bed fusion (LPBF) allow geometrically complex parts to be manufactured within a single step. However, as an aftereffect of the localized heat input, the rapid cooling rates are the origin of the large residual stress (RS) retained in as-manufactured parts. With a view on the microstructure, the rapid directional cooling leads to a cellular solidification mode which is accompanied by columnar grown grains possessing crystallographic texture. The solidification conditions can be controlled by the processing parameters and the scanning strategy. Thus, the process allows one to tailor the microstructure and the texture to the specific needs. Yet, such microstructures are not only the origin of the mechanical anisotropy but also pose metrological challenges for the diffraction-based RS determination. In that context the micromechanical elastic anisotropy plays an important role: it translates the measured microscopic strain to macroscopic stress. Therefore, it is of uttermost importance to understand the influence of the hierarchical microstructures and the texture on the elastic anisotropy of LPBF manufactured materials.&#13;
This study reveals the influence of the build orientation and the texture on the micro-mechanical anisotropy of as-built Inconel 718. Through variations of the build orientation and the scanning strategy, we manufactured specimens possessing [001]/[011]-, [001]-, and [011]/[111]-type textures. The resulting microstructures lead to differences in the macroscopic mechanical properties. Even further, tensile in-situ loading experiments during neutron diffraction measurements along the different texture components revealed differences in the microstrain response of multiple crystal lattice planes. In particular, the load partitioning and the residual strain accumulation among the [011]/[111] textured specimen displayed distinct differences measured up to a macroscopic strain of 10 %. However, the behavior of the specimens possessing [001]/[011]-and [001]-type texture was only minorly affected. The consequences on the metrology of RS analysis by diffraction-based methods are discussed.</abstract>
    <enrichment key="eventName">International Conference on Additive Manufacturing ICAM 2022</enrichment>
    <enrichment key="eventPlace">Orlando, FL, USA</enrichment>
    <enrichment key="eventStart">31.10.2022</enrichment>
    <enrichment key="eventEnd">04.11.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Jakob Schröder</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Electron backscatter diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Mechanical behavior</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>56804</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Fundamentals of diffraction-based residual stress and texture analysis of PBF-LB Inconel 718</title>
    <abstract language="eng">Laser powder bed fusion (PBF-LB/M) of metallic alloys is a layer wise additive manufacturing process which provides significant scope for more efficient designs of components, benefiting performance and weight, leading to efficiency improvements for various sectors of industry. However, to benefit from these design freedoms, knowledge of the high produced induced residual stress and mechanical property anisotropy associated with the unique microstructures is critical. X-ray and neutron diffraction are considered the benchmark for non-destructive characterization of surface and bulk internal residual stress. The latter, characterized by the high penetration power in most engineering alloys, allows for the use of diffraction angle close to 90° enabling a near cubic sampling volume to be specified. However, the complex microstructures of columnar growth with inherent crystallographic texture typically produced during PBF-LB/M of metallics present significant challenges to the assumptions typically required for time efficient determination of residual stress. These challenges include the selection of an appropriate set of diffraction elastic constants and a representative strain-free reference for the material of interest. In this presentation advancements in the field of diffraction-based residual stress analysis of L-PBF Inconel 718 will be presented. The choice of an appropriate set of diffraction-elastic constants depending on the underlying microstructure will be described.</abstract>
    <enrichment key="eventName">MLZ User Meeting 2022</enrichment>
    <enrichment key="eventPlace">Munich, Germany</enrichment>
    <enrichment key="eventStart">08.12.2022</enrichment>
    <enrichment key="eventEnd">09.12.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="InvitedTalks">1</enrichment>
    <author>Jakob Schröder</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual Stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Texture</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Mechanical behavior</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>58626</id>
    <completedYear/>
    <publishedYear>2023</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>10</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>2605</volume>
    <type>article</type>
    <publisherName>IOP Publishing Ltd.</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Temperature distribution during welding measured by neutron imaging</title>
    <abstract language="eng">This study was carried out to investigate the neutron transmission signal as a function of sample temperature during a welding process. A theoretical description that includes the Debye-Waller factor was used to describe the temperature influence on the neutron crosssections. Neutron imaging using a monochromatic beam helps to observe transmission variations related to the material temperature. In-situ neutron imaging of welding experiments show the distribution of the temperature in bulk steel samples. The performed finite element modelling of expected temperature distributions shows good agreement with the obtained experimental data.</abstract>
    <parentTitle language="eng">Journal of Physics: Conference Series</parentTitle>
    <identifier type="doi">10.1088/1742-6596/2605/1/012026</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-586268</identifier>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>R. Jamro</author>
    <author>Tobias Mente</author>
    <author>N. Kardjilov</author>
    <author>Henning Markötter</author>
    <author>Ala'A. M. Al-Falahat</author>
    <author>R. Woracek</author>
    <author>I. Manke</author>
    <author>Axel Griesche</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron imaging</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Debye-Waller-Faktor</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Advanced Materials</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/58626/Jamro_2023_J._Phys.__Conf._Ser._2605_012026.pdf</file>
  </doc>
  <doc>
    <id>60432</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Microstructure Based Study on the Low Cycle Fatigue Behavior of Stainless Steel 316L manufactured by Laser Powder Bed Fusion</title>
    <abstract language="eng">Due to the advantages of Laser Powder Bed Fusion (PBF-LB), i.e., design freedom and the possibility to manufacture parts with filigree structures, and the considerable amount of knowledge available for 316L in its conventional variant, the mechanical behavior, and related microstructure-property relationships of PBF-LB/316L are increasingly subject of research. However, many aspects regarding the - application-relevant - mechanical behavior at high temperatures are not yet fully understood. Here, we present the results of an experimental study on the LCF behavior of PBF-LB/316L featuring a low defect population, which makes this study more microstructure-focused than most of the studies in the literature. The LCF tests were performed between room temperature (RT) and 600 °C. The mechanical response is characterized by strain-life curves, and hysteresis and cyclic deformation curves. The damage and deformation mechanisms are studied with X-ray computed tomography, and optical and electron microscopy. The PBF-LB/M/316L was heat treated at 450 °C for 4 h, and a hot‑rolled (HR) 316L variant with a fully recrystallized equiaxed microstructure was tested as a reference. Besides, selected investigations were performed after a subsequent heat treatment at 900 °C for 1 h. The PBF-LB/316L exhibits higher cyclic stresses than HR/316L for most of the fatigue life, especially at room temperature. At the smallest strain amplitudes, the fatigue lives of PBF-LB/M/316L are markedly shorter than in HR/316L. The main damage mechanisms are multiple cracking at slip bands (RT) and intergranular cracking (600 °C). Neither the melt pool boundaries nor the gas porosity have a significant influence on the LCF damage mechanism. The cyclic stress-strain deformation behavior of PBF-LB/M/316L features an initial hardening followed by a continuous softening. The additional heat treatment at 900 °C for 1 h led to decreased cyclic stresses, and a longer fatigue life.</abstract>
    <enrichment key="eventName">4th Symposium on Materials and Additive Manufacturing</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">12.06.2024</enrichment>
    <enrichment key="eventEnd">14.06.2024</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Luis Ávila Calderón</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>316L</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Microstructure</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Low Cycle Fatigue</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Heat Treatment</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Poeder Bed Fusion</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
  <doc>
    <id>60934</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>3737</pageFirst>
    <pageLast>3749</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>32</volume>
    <type>article</type>
    <publisherName>Elsevier B.V.</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Fatigue and fracture in dual-material specimens of nickel-based alloys fabricated by hybrid additive manufacturing</title>
    <abstract language="eng">The integration of additive manufacturing with traditional processes, termed hybrid additive manufacturing, has expanded its application domain, particularly in the repair of gas turbine blade tips. However, process-related defects in additively manufactured materials, interface formation, and material property mismatches in dual-material structures can significantly impact the fatigue performance of components. This investigation examines the low cycle fatigue and fatigue crack growth behaviors in dual-material specimens of nickel-based alloys, specifically the additively manufactured STAL15 and the cast alloy 247DS, at elevated temperatures. Low cycle fatigue experiments were conducted at temperatures of 950 °C and 1000 °C under a range of strain levels (0.3%–0.8%) and fatigue crack growth tests were conducted at 950 °C with stress ratios of 0.1 and −1. Fractographic and microscopic analyses were performed to comprehend fatigue crack initiation and crack growth mechanisms in the dual-material structure. The results consistently indicated crack initiation and fatigue fracture in the additively manufactured STAL15 material. Notably, fatigue crack growth retardation was observed near the interface when the crack extended from the additively manufactured STAL15 material to the perpendicularly positioned interface. This study highlights the importance of considering yield strength mismatch, as well as the potential effects of residual stresses and grain structure differences, in the interpretation of fatigue crack growth behavior at the interface.</abstract>
    <parentTitle language="eng">Journal of Materials Research and Technology</parentTitle>
    <identifier type="doi">10.1016/j.jmrt.2024.08.211</identifier>
    <identifier type="issn">2238-7854</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-609340</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="opus_import_data">{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,9,4]],"date-time":"2024-09-04T00:30:58Z","timestamp":1725409858335},"reference-count":68,"publisher":"Elsevier BV","license":[{"start":{"date-parts":[[2024,9,1]],"date-time":"2024-09-01T00:00:00Z","timestamp":1725148800000},"content-version":"tdm","delay-in-days":0,"URL":"https:\/\/www.elsevier.com\/tdm\/userlicense\/1.0\/"},{"start":{"date-parts":[[2024,9,1]],"date-time":"2024-09-01T00:00:00Z","timestamp":1725148800000},"content-version":"tdm","delay-in-days":0,"URL":"https:\/\/www.elsevier.com\/legal\/tdmrep-license"},{"start":{"date-parts":[[2024,8,31]],"date-time":"2024-08-31T00:00:00Z","timestamp":1725062400000},"content-version":"vor","delay-in-days":0,"URL":"http:\/\/creativecommons.org\/licenses\/by\/4.0\/"}],"funder":[{"DOI":"10.13039\/501100008530","name":"European Regional Development Fund","doi-asserted-by":"publisher","id":[{"id":"10.13039\/501100008530","id-type":"DOI","asserted-by":"publisher"}]}],"content-domain":{"domain":["elsevier.com","sciencedirect.com"],"crossmark-restriction":true},"short-container-title":["Journal of Materials Research and Technology"],"published-print":{"date-parts":[[2024,9]]},"DOI":"10.1016\/j.jmrt.2024.08.211","type":"journal-article","created":{"date-parts":[[2024,9,2]],"date-time":"2024-09-02T16:21:03Z","timestamp":1725294063000},"update-policy":"http:\/\/dx.doi.org\/10.1016\/elsevier_cm_policy","source":"Crossref","is-referenced-by-count":0,"title":["Fatigue and fracture in dual-material specimens of nickel-based alloys fabricated by hybrid additive manufacturing"],"prefix":"10.1016","author":[{"ORCID":"http:\/\/orcid.org\/0009-0002-3634-6989","authenticated-orcid":false,"given":"Ashok","family":"Bhadeliya","sequence":"first","affiliation":[]},{"given":"Birgit","family":"Rehmer","sequence":"additional","affiliation":[]},{"ORCID":"http:\/\/orcid.org\/0000-0001-6848-9955","authenticated-orcid":false,"given":"Bernard","family":"Fedelich","sequence":"additional","affiliation":[]},{"given":"Torsten","family":"Jokisch","sequence":"additional","affiliation":[]},{"ORCID":"http:\/\/orcid.org\/0000-0003-0727-5499","authenticated-orcid":false,"given":"Birgit","family":"Skrotzki","sequence":"additional","affiliation":[]},{"given":"J\u00fcrgen","family":"Olbricht","sequence":"additional","affiliation":[]}],"member":"78","reference":[{"key":"10.1016\/j.jmrt.2024.08.211_bib1","doi-asserted-by":"crossref","first-page":"112","DOI":"10.1016\/j.pmatsci.2017.10.001","article-title":"Additive manufacturing of metallic components \u2013 Process, structure and properties","volume":"92","author":"DebRoy","year":"2018","journal-title":"Progress in Materials Science"},{"issue":"9","key":"10.1016\/j.jmrt.2024.08.211_bib2","doi-asserted-by":"crossref","first-page":"2146","DOI":"10.1111\/ffe.13092","article-title":"Do additive manufactured parts deserve better?","volume":"42","author":"Yates","year":"2019","journal-title":"Fatigue &amp; Fracture of Engineering Materials &amp; Structures"},{"key":"10.1016\/j.jmrt.2024.08.211_bib3","doi-asserted-by":"crossref","DOI":"10.1016\/j.aime.2021.100032","article-title":"Hybrid metal additive manufacturing: A state\u2013of\u2013the-art review","volume":"2","author":"Pragana","year":"2021","journal-title":"Advances in Industrial and Manufacturing Engineering"},{"issue":"5","key":"10.1016\/j.jmrt.2024.08.211_bib4","doi-asserted-by":"crossref","first-page":"2409","DOI":"10.1007\/s00170-022-10691-5","article-title":"Camera-based high precision position detection for hybrid additive manufacturing with laser powder bed fusion","volume":"125","author":"Merz","year":"2023","journal-title":"The International Journal of Advanced Manufacturing Technology"},{"key":"10.1016\/j.jmrt.2024.08.211_bib5","doi-asserted-by":"crossref","first-page":"752","DOI":"10.1016\/j.phpro.2016.08.077","article-title":"The Role of Laser Additive Manufacturing Methods of Metals in Repair, Refurbishment and Remanufacturing \u2013 Enabling Circular Economy","volume":"83","author":"Leino","year":"2016","journal-title":"Physics Procedia"},{"key":"10.1016\/j.jmrt.2024.08.211_bib6","doi-asserted-by":"crossref","first-page":"402","DOI":"10.1016\/j.phpro.2011.03.051","article-title":"Restoration of Nickel-Base Turbine Blade Knife-Edges with Controlled Laser Aided Additive Manufacturing","volume":"12","author":"Bi","year":"2011","journal-title":"Physics Procedia"},{"issue":"1","key":"10.1016\/j.jmrt.2024.08.211_bib7","doi-asserted-by":"crossref","first-page":"21","DOI":"10.3390\/jmmp5010021","article-title":"Turbine Blade Tip Repair by Laser Directed Energy Deposition Additive Manufacturing Using a Rene 142\u2013MERL 72 Powder Blend","volume":"5","author":"Keshavarz","year":"2021","journal-title":"Journal of Manufacturing and Materials Processing"},{"issue":"8","key":"10.1016\/j.jmrt.2024.08.211_bib8","doi-asserted-by":"crossref","first-page":"657","DOI":"10.1016\/j.crhy.2018.10.002","article-title":"High temperature materials for aerospace applications: Ni-based superalloys and \u03b3-TiAl alloys","volume":"19","author":"Perrut","year":"2018","journal-title":"Comptes Rendus Physique"},{"key":"10.1016\/j.jmrt.2024.08.211_bib9","first-page":"221","article-title":"Derivations - CM 247 LC DS Alloy and CMSX Single Crystal Alloys: Properties &amp; Performance","author":"Harris","year":"1984","journal-title":"Superalloys"},{"issue":"5","key":"10.1016\/j.jmrt.2024.08.211_bib10","doi-asserted-by":"crossref","first-page":"1730","DOI":"10.1007\/s11661-022-06955-0","article-title":"Electron Beam Based Additive Manufacturing of Alloy 247 for Turbine Engine Application: From Research towards Industrialization","volume":"54","author":"Ramsperger","year":"2023","journal-title":"Metallurgical and Materials Transactions A"},{"key":"10.1016\/j.jmrt.2024.08.211_bib11","doi-asserted-by":"crossref","first-page":"197","DOI":"10.7449\/2012\/Superalloys_2012_197_204","article-title":"A New Single Crystal Superalloy for Power Generation Applications","volume":"2012","author":"Reed","year":"2012","journal-title":"Superalloys"},{"key":"10.1016\/j.jmrt.2024.08.211_bib12","doi-asserted-by":"crossref","DOI":"10.1007\/s11661-011-0995-2","article-title":"On the Mechanical Behavior of a New Single-Crystal Superalloy for Industrial Gas Turbine Applications","volume":"43","author":"Sato","year":"2012","journal-title":"Metallurgical and Materials Transactions A"},{"key":"10.1016\/j.jmrt.2024.08.211_bib13","doi-asserted-by":"crossref","DOI":"10.1016\/j.actamat.2021.117240","article-title":"Fracture and fatigue in additively manufactured metals","volume":"219","author":"Becker","year":"2021","journal-title":"Acta Materialia"},{"key":"10.1016\/j.jmrt.2024.08.211_bib14","doi-asserted-by":"crossref","DOI":"10.1016\/j.pmatsci.2023.101108","article-title":"Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship","volume":"136","author":"Mostafaei","year":"2023","journal-title":"Progress in Materials Science"},{"key":"10.1016\/j.jmrt.2024.08.211_bib15","doi-asserted-by":"crossref","first-page":"46","DOI":"10.1016\/j.actamat.2016.02.019","article-title":"Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling","volume":"108","author":"Carroll","year":"2016","journal-title":"Acta Materialia"},{"issue":"5","key":"10.1016\/j.jmrt.2024.08.211_bib16","doi-asserted-by":"crossref","first-page":"781","DOI":"10.1016\/S0020-7683(99)00060-8","article-title":"The yield stress gradient effect in inhomogeneous materials","volume":"37","author":"Kolednik","year":"2000","journal-title":"International Journal of Solids and Structures"},{"key":"10.1016\/j.jmrt.2024.08.211_bib17","article-title":"Interface characteristics and mechanical behavior of additively manufactured multi-material of stainless steel and Inconel","volume":"847","author":"Sagong","year":"2022","journal-title":"Materials Science and Engineering: A"},{"key":"10.1016\/j.jmrt.2024.08.211_bib18","doi-asserted-by":"crossref","first-page":"17","DOI":"10.1016\/j.matdes.2016.01.041","article-title":"Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology","volume":"94","author":"Hinojos","year":"2016","journal-title":"Materials &amp; Design"},{"key":"10.1016\/j.jmrt.2024.08.211_bib19","doi-asserted-by":"crossref","DOI":"10.1016\/j.ijfatigue.2021.106454","article-title":"Fatigue crack growth in IN718\/316L multi-materials layered structures fabricated by laser powder bed fusion","volume":"152","author":"Duval-Chaneac","year":"2021","journal-title":"International Journal of Fatigue"},{"issue":"1","key":"10.1016\/j.jmrt.2024.08.211_bib20","doi-asserted-by":"crossref","first-page":"225","DOI":"10.1016\/S0921-5093(00)00703-6","article-title":"Fatigue crack propagation behavior in the vicinity of an interface between materials with different yield stresses","volume":"283","author":"Pippan","year":"2000","journal-title":"Materials Science and Engineering: A"},{"issue":"9","key":"10.1016\/j.jmrt.2024.08.211_bib21","doi-asserted-by":"crossref","first-page":"1189","DOI":"10.1016\/0956-716X(92)90597-8","article-title":"The growth of a fatigue crack approaching a perpendicularly-oriented, bimaterial interface","volume":"27","author":"Suresh","year":"1992","journal-title":"Scripta Metallurgica et Materialia"},{"key":"10.1016\/j.jmrt.2024.08.211_bib22","unstructured":"ISO 12106:, Metallic materials \u2014 Fatigue testing \u2014 Axial-strain-controlled method. 2017, International Organization for Standardization."},{"key":"10.1016\/j.jmrt.2024.08.211_bib23","unstructured":"ISO 12108:, Metallic Materials-Fatigue testing-Fatigue crack growth method, International Organization for Standardization. 2018."},{"issue":"2","key":"10.1016\/j.jmrt.2024.08.211_bib24","doi-asserted-by":"crossref","first-page":"91","DOI":"10.1007\/BF01141259","article-title":"A comparison of theoretical and experimental methods of calibrating the electrical potential drop technique for crack length determination","volume":"20","author":"Hicks","year":"1982","journal-title":"International Journal of Fracture"},{"key":"10.1016\/j.jmrt.2024.08.211_bib25","unstructured":"ASTM E647-15, Standard Test Method for Measurement of Fatigue Crack Growth Rates. 2015. p. 48."},{"key":"10.1016\/j.jmrt.2024.08.211_bib26","unstructured":"Bhadeliya, A., et al., High temperature fatigue crack growth behavior in brazed joints of Alloy 247DS. [Manuscript submitted for publication]. 2024."},{"key":"10.1016\/j.jmrt.2024.08.211_bib27","doi-asserted-by":"crossref","unstructured":"Tada, H., P.C. Paris, and G.R. Irwin, The Stress Analysis of Cracks Handbook, Third Edition. 2000: ASME Press.","DOI":"10.1115\/1.801535"},{"issue":"2","key":"10.1016\/j.jmrt.2024.08.211_bib28","doi-asserted-by":"crossref","first-page":"152","DOI":"10.3390\/cryst11020152","article-title":"Investigation of Elastic Properties of the Single-Crystal Nickel-Base Superalloy CMSX-4 in the Temperature Interval between Room Temperature and 1300 \u00b0C","volume":"11","author":"Epishin","year":"2021","journal-title":"Crystals"},{"key":"10.1016\/j.jmrt.2024.08.211_bib29","unstructured":"ASTM E1875-20a, Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance. 2021. p. 10."},{"key":"10.1016\/j.jmrt.2024.08.211_bib30","unstructured":"ISO 6507-1:2018-07, Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018);. 2018, Beuth Verlag GmbH."},{"key":"10.1016\/j.jmrt.2024.08.211_bib31","doi-asserted-by":"crossref","unstructured":"Richard, H.A. and M. Sander, Fatigue Crack Growth Under Cyclic Loading with Constant Amplitude, in Fatigue Crack Growth: Detect - Assess - Avoid, H.A. Richard and M. Sander, Editors. 2016, Springer International Publishing: Cham. p. 113-151.","DOI":"10.1007\/978-3-319-32534-7_4"},{"key":"10.1016\/j.jmrt.2024.08.211_bib32","doi-asserted-by":"crossref","first-page":"484","DOI":"10.1016\/j.actamat.2015.05.050","article-title":"Failure of metals II: Fatigue","volume":"107","author":"Pineau","year":"2016","journal-title":"Acta Materialia"},{"issue":"3","key":"10.1016\/j.jmrt.2024.08.211_bib33","doi-asserted-by":"crossref","first-page":"473","DOI":"10.1007\/BF02648545","article-title":"Low cycle fatigue behavior of Ren\u00e9 80 at elevated temperature","volume":"12","author":"Antolovich","year":"1981","journal-title":"Metallurgical Transactions A"},{"issue":"12","key":"10.1016\/j.jmrt.2024.08.211_bib34","doi-asserted-by":"crossref","first-page":"867","DOI":"10.1046\/j.1460-2695.2001.00451.x","article-title":"High temperature fatigue of the nickel-base single-crystal superalloy CMSX-10","volume":"24","author":"Ohtani","year":"2001","journal-title":"Fatigue &amp; Fracture of Engineering Materials &amp; Structures"},{"key":"10.1016\/j.jmrt.2024.08.211_bib35","doi-asserted-by":"crossref","first-page":"3895","DOI":"10.1080\/14786430310001605407","article-title":"A multiscale approach for coupled phenomena in fcc materials at high temperatures","volume":"83","author":"Dumoulin","year":"2003","journal-title":"Philosophical Magazine"},{"key":"10.1016\/j.jmrt.2024.08.211_bib36","doi-asserted-by":"crossref","DOI":"10.1016\/j.matchar.2020.110241","article-title":"Low cycle fatigue behavior and microstructural evolution of nickel-based superalloy M951G at elevated temperatures","volume":"163","author":"Cui","year":"2020","journal-title":"Materials Characterization"},{"issue":"7","key":"10.1016\/j.jmrt.2024.08.211_bib37","doi-asserted-by":"crossref","first-page":"1095","DOI":"10.1007\/BF02667395","article-title":"Low cycle fatigue behavior of inconel 718 at 298 K and 823 K","volume":"8","author":"Fournier","year":"1977","journal-title":"Metallurgical Transactions A"},{"key":"10.1016\/j.jmrt.2024.08.211_bib38","doi-asserted-by":"crossref","DOI":"10.1016\/j.ijfatigue.2023.107880","article-title":"Low cycle fatigue behavior of additively manufactured Haynes 282: Effect of post-processing and test temperature","volume":"176","author":"Ahmad","year":"2023","journal-title":"International Journal of Fatigue"},{"issue":"2","key":"10.1016\/j.jmrt.2024.08.211_bib39","doi-asserted-by":"crossref","first-page":"546","DOI":"10.1016\/j.net.2022.09.027","article-title":"Fatigue life curves of alloy 617 in the temperature range of 800\u2013950 \u00b0C","volume":"55","author":"Sah","year":"2023","journal-title":"Nuclear Engineering and Technology"},{"key":"10.1016\/j.jmrt.2024.08.211_bib40","doi-asserted-by":"crossref","first-page":"359","DOI":"10.1007\/BF02652546","article-title":"Influence of time and temperature dependent processes on strain controlled low cycle fatigue behavior of alloy 617","volume":"19","author":"Rao","year":"1988","journal-title":"Metallurgical Transactions A"},{"key":"10.1016\/j.jmrt.2024.08.211_bib41","doi-asserted-by":"crossref","first-page":"538","DOI":"10.1016\/j.msea.2018.12.084","article-title":"Low-cycle fatigue of single crystal nickel-based superalloy \u2013 mechanical testing and TEM characterisation","volume":"744","author":"Zhang","year":"2019","journal-title":"Materials Science and Engineering: A"},{"issue":"2","key":"10.1016\/j.jmrt.2024.08.211_bib42","doi-asserted-by":"crossref","DOI":"10.3390\/met7020054","article-title":"Effect of Strain Range on the Low Cycle Fatigue in Alloy 617 at High Temperature","volume":"7","author":"Dewa","year":"2017","journal-title":"Metals"},{"key":"10.1016\/j.jmrt.2024.08.211_bib43","doi-asserted-by":"crossref","first-page":"14","DOI":"10.1016\/j.ijfatigue.2017.01.001","article-title":"Additive manufacturing of fatigue resistant materials: Challenges and opportunities","volume":"98","author":"Yadollahi","year":"2017","journal-title":"International Journal of Fatigue"},{"key":"10.1016\/j.jmrt.2024.08.211_bib44","doi-asserted-by":"crossref","first-page":"720","DOI":"10.1016\/j.matdes.2016.08.041","article-title":"Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting","volume":"110","author":"Ruttert","year":"2016","journal-title":"Materials &amp; Design"},{"key":"10.1016\/j.jmrt.2024.08.211_bib45","doi-asserted-by":"crossref","first-page":"182","DOI":"10.1016\/j.msea.2018.08.037","article-title":"Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties","volume":"735","author":"Moussaoui","year":"2018","journal-title":"Materials Science and Engineering: A"},{"issue":"PR5","key":"10.1016\/j.jmrt.2024.08.211_bib46","article-title":"Oxidation of the turbine blade material CMSX4 studied by X-ray diffraction","volume":"8","author":"Gross","year":"1998","journal-title":"Le Journal de Physique IV"},{"issue":"5","key":"10.1016\/j.jmrt.2024.08.211_bib47","doi-asserted-by":"crossref","first-page":"771","DOI":"10.1111\/j.1460-2695.1997.tb00307.x","article-title":"High temperature fatigue in single crystal superalloys","volume":"20","author":"Mart\u00ednez-Esnaola","year":"1997","journal-title":"Fatigue &amp; Fracture of Engineering Materials &amp; Structures"},{"issue":"1","key":"10.1016\/j.jmrt.2024.08.211_bib48","doi-asserted-by":"crossref","first-page":"33","DOI":"10.1016\/0025-5416(83)90135-0","article-title":"High temperature low cycle fatigue of MAR-M 509 superalloy II: The influence of oxidation at high temperatures","volume":"58","author":"Reuchet","year":"1983","journal-title":"Materials Science and Engineering"},{"issue":"8","key":"10.1016\/j.jmrt.2024.08.211_bib49","doi-asserted-by":"crossref","first-page":"791","DOI":"10.1016\/S0142-1123(99)00041-9","article-title":"The influence of temperature on low cycle fatigue behavior of nickel base superalloy GH4049","volume":"21","author":"Chen","year":"1999","journal-title":"International Journal of Fatigue"},{"key":"10.1016\/j.jmrt.2024.08.211_bib50","doi-asserted-by":"crossref","first-page":"499","DOI":"10.1016\/j.ijfatigue.2016.03.012","article-title":"Long fatigue crack growth in Inconel 718 produced by selective laser melting","volume":"92","author":"Kone\u010dn\u00e1","year":"2016","journal-title":"International Journal of Fatigue"},{"issue":"9","key":"10.1016\/j.jmrt.2024.08.211_bib51","doi-asserted-by":"crossref","first-page":"1053","DOI":"10.1016\/0020-7683(89)90021-8","article-title":"Crack deflection at an interface between dissimilar elastic materials","volume":"25","author":"Ming-Yuan","year":"1989","journal-title":"International Journal of Solids and Structures"},{"issue":"24","key":"10.1016\/j.jmrt.2024.08.211_bib52","doi-asserted-by":"crossref","first-page":"3443","DOI":"10.1016\/0020-7683(94)90025-6","article-title":"Crack deflection at an interface between dissimilar elastic materials: Role of residual stresses","volume":"31","author":"He","year":"1994","journal-title":"International Journal of Solids and Structures"},{"key":"10.1016\/j.jmrt.2024.08.211_bib53","doi-asserted-by":"crossref","DOI":"10.1016\/j.engfracmech.2020.107072","article-title":"The roles of yield strength mismatch, interface strength, and plastic strain gradients in fatigue crack growth across interfaces","volume":"235","author":"Pribe","year":"2020","journal-title":"Engineering Fracture Mechanics"},{"issue":"3","key":"10.1016\/j.jmrt.2024.08.211_bib54","doi-asserted-by":"crossref","first-page":"1157","DOI":"10.1016\/0956-7151(94)00295-S","article-title":"Fracture normal to a bimaterial interface: Effects of plasticity on crack-tip shielding and amplification","volume":"43","author":"Sugimura","year":"1995","journal-title":"Acta Metallurgica et Materialia"},{"issue":"4","key":"10.1016\/j.jmrt.2024.08.211_bib55","doi-asserted-by":"crossref","first-page":"381","DOI":"10.1023\/A:1007460509387","article-title":"Dynamic crack growth across an interface","volume":"85","author":"Siegmund","year":"1997","journal-title":"International Journal of Fracture"},{"issue":"12","key":"10.1016\/j.jmrt.2024.08.211_bib56","doi-asserted-by":"crossref","first-page":"2007","DOI":"10.1016\/0956-716X(95)00442-X","article-title":"Fatigue crack growth at arbitrary angles to bimaterial interfaces","volume":"33","author":"Sugimura","year":"1995","journal-title":"Scripta Metallurgica et Materialia"},{"issue":"1","key":"10.1016\/j.jmrt.2024.08.211_bib57","doi-asserted-by":"crossref","first-page":"258","DOI":"10.1016\/S0921-5093(03)00142-4","article-title":"Fatigue crack propagation normal to a plasticity mismatched bimaterial interface","volume":"356","author":"Jiang","year":"2003","journal-title":"Materials Science and Engineering: A"},{"key":"10.1016\/j.jmrt.2024.08.211_bib58","doi-asserted-by":"crossref","first-page":"1","DOI":"10.1016\/j.scriptamat.2015.10.021","article-title":"Improvement of fatigue life by compliant and soft interlayers","volume":"113","author":"Kolednik","year":"2016","journal-title":"Scripta Materialia"},{"issue":"1","key":"10.1016\/j.jmrt.2024.08.211_bib59","doi-asserted-by":"crossref","first-page":"172","DOI":"10.1016\/j.msea.2009.04.059","article-title":"Modeling fatigue crack growth in a bimaterial specimen with the configurational forces concept","volume":"519","author":"Kolednik","year":"2009","journal-title":"Materials Science and Engineering: A"},{"key":"10.1016\/j.jmrt.2024.08.211_bib60","doi-asserted-by":"crossref","first-page":"621","DOI":"10.1016\/j.jmapro.2020.10.009","article-title":"Residual stress of typical parts in laser powder bed fusion","volume":"59","author":"Chen","year":"2020","journal-title":"Journal of Manufacturing Processes"},{"key":"10.1016\/j.jmrt.2024.08.211_bib61","doi-asserted-by":"crossref","first-page":"571","DOI":"10.1016\/j.addma.2018.06.002","article-title":"Residual stress evaluation in selective-laser-melting additively manufactured titanium (Ti-6Al-4V) and inconel 718 using the contour method and numerical simulation","volume":"22","author":"Ahmad","year":"2018","journal-title":"Additive Manufacturing"},{"issue":"11","key":"10.1016\/j.jmrt.2024.08.211_bib62","doi-asserted-by":"crossref","first-page":"1830","DOI":"10.3390\/met11111830","article-title":"Diffraction-Based Residual Stress Characterization in Laser Additive Manufacturing of Metals","volume":"11","author":"Schr\u00f6der","year":"2021","journal-title":"Metals"},{"issue":"7","key":"10.1016\/j.jmrt.2024.08.211_bib63","doi-asserted-by":"crossref","first-page":"858","DOI":"10.1016\/j.ijfatigue.2011.01.019","article-title":"Effects of residual stresses on fatigue crack growth behavior of structural materials: Analytical corrections","volume":"33","author":"Lammi","year":"2011","journal-title":"International Journal of Fatigue"},{"key":"10.1016\/j.jmrt.2024.08.211_bib64","doi-asserted-by":"crossref","DOI":"10.1016\/j.ijfatigue.2022.106954","article-title":"The influence of residual stress on fatigue crack growth rates of additively manufactured Type 304L stainless steel","volume":"162","author":"Smudde","year":"2022","journal-title":"International Journal of Fatigue"},{"key":"10.1016\/j.jmrt.2024.08.211_bib65","doi-asserted-by":"crossref","first-page":"557","DOI":"10.1016\/j.prostr.2016.06.072","article-title":"On the mechanism of dynamic embrittlement and its effect on fatigue crack propagation in IN718 at 650\u00b0C","volume":"2","author":"Christ","year":"2016","journal-title":"Procedia Structural Integrity"},{"key":"10.1016\/j.jmrt.2024.08.211_bib66","unstructured":"Towner, Z.B., et al., Creep crack growth in alloy 247LC-DS. Fatigue &amp; Fracture of Engineering Materials &amp; Structures. n\/a(n\/a)."},{"key":"10.1016\/j.jmrt.2024.08.211_bib67","doi-asserted-by":"crossref","unstructured":"Glinka, G., Effect of residual stresses on fatigue crack growth in steel weldments under constant and variable amplitude loads. ASTM Special Technical Publication, 1979: p. 198-214.","DOI":"10.1520\/STP34914S"},{"key":"10.1016\/j.jmrt.2024.08.211_bib68","doi-asserted-by":"crossref","unstructured":"Parker, A., Stress intensity factors, crack profiles, and fatigue crack growth rates in residual stress fields. ASTM STP, 1982: p. 13\u201331.","DOI":"10.1520\/STP30095S"}],"container-title":["Journal of Materials Research and Technology"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/api.elsevier.com\/content\/article\/PII:S2238785424020027?httpAccept=text\/xml","content-type":"text\/xml","content-version":"vor","intended-application":"text-mining"},{"URL":"https:\/\/api.elsevier.com\/content\/article\/PII:S2238785424020027?httpAccept=text\/plain","content-type":"text\/plain","content-version":"vor","intended-application":"text-mining"}],"deposited":{"date-parts":[[2024,9,3]],"date-time":"2024-09-03T15:49:38Z","timestamp":1725378578000},"score":1,"resource":{"primary":{"URL":"https:\/\/linkinghub.elsevier.com\/retrieve\/pii\/S2238785424020027"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2024,9]]},"references-count":68,"alternative-id":["S2238785424020027"],"URL":"http:\/\/dx.doi.org\/10.1016\/j.jmrt.2024.08.211","relation":{},"ISSN":["2238-7854"],"issn-type":[{"type":"print","value":"2238-7854"}],"subject":[],"published":{"date-parts":[[2024,9]]},"assertion":[{"value":"Elsevier","name":"publisher","label":"This article is maintained by"},{"value":"Fatigue and fracture in dual-material specimens of nickel-based alloys fabricated by hybrid additive manufacturing","name":"articletitle","label":"Article Title"},{"value":"Journal of Materials Research and Technology","name":"journaltitle","label":"Journal Title"},{"value":"https:\/\/doi.org\/10.1016\/j.jmrt.2024.08.211","name":"articlelink","label":"CrossRef DOI link to publisher maintained version"},{"value":"article","name":"content_type","label":"Content Type"},{"value":"\u00a9 2024 The Authors. Published by Elsevier B.V.","name":"copyright","label":"Copyright"}]}}</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="date_peer_review">23.09.2024</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Ashok Bhadeliya</author>
    <author>Birgit Rehmer</author>
    <author>Bernard Fedelich</author>
    <author>T. Jokisch</author>
    <author>Birgit Skrotzki</author>
    <author>Jürgen Olbricht</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hybrid additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Dual-material nickel-based alloys</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>High-temperature fatigue crack growth</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Low cycle fatigue</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">5.5 Materialmodellierung</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <thesisGrantor>Technische Universität Berlin</thesisGrantor>
    <file>https://opus4.kobv.de/opus4-bam/files/60934/1-s2.0-S2238785424020027-main.pdf</file>
  </doc>
  <doc>
    <id>59931</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>17</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>article</type>
    <publisherName>Wiley</publisherName>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature</title>
    <abstract language="eng">This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.</abstract>
    <parentTitle language="eng">Advanced Engineering Materials</parentTitle>
    <identifier type="doi">10.1002/adem.202302122</identifier>
    <identifier type="issn">1527-2648</identifier>
    <identifier type="urn">urn:nbn:de:kobv:b43-599316</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="opus_import_data">{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,4,19]],"date-time":"2024-04-19T01:05:00Z","timestamp":1713488700891},"reference-count":43,"publisher":"Wiley","license":[{"start":{"date-parts":[[2024,4,17]],"date-time":"2024-04-17T00:00:00Z","timestamp":1713312000000},"content-version":"vor","delay-in-days":0,"URL":"http:\/\/creativecommons.org\/licenses\/by\/4.0\/"}],"content-domain":{"domain":["onlinelibrary.wiley.com"],"crossmark-restriction":true},"short-container-title":["Adv Eng Mater"],"abstract":"&lt;jats:p&gt;This study investigates the room\u2010 and high\u2010temperature (650\u2009\u00b0C) tensile and low\u2010cycle\u2010fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF\u2010LB\/M) with a four\u2010step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF\u2010LB\/M variant at room temperature is slightly lower than that of the wrought material, while at 650\u2009\u00b0C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (\u22650.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF\u2010LB\/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local  crystallite clusters.&lt;\/jats:p&gt;","DOI":"10.1002\/adem.202302122","type":"journal-article","created":{"date-parts":[[2024,2,3]],"date-time":"2024-02-03T02:39:35Z","timestamp":1706927975000},"update-policy":"http:\/\/dx.doi.org\/10.1002\/crossmark_policy","source":"Crossref","is-referenced-by-count":0,"title":["Tensile and Low\u2010Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature"],"prefix":"10.1002","author":[{"ORCID":"http:\/\/orcid.org\/0000-0002-9115-5475","authenticated-orcid":false,"given":"Nadja","family":"Sonntag","sequence":"first","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"given":"Benjamin","family":"Piesker","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-0012-2414","authenticated-orcid":false,"given":"Luis Alexander","family":"\u00c1vila Calder\u00f3n","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0009-0009-9763-9137","authenticated-orcid":false,"given":"Gunther","family":"Mohr","sequence":"additional","affiliation":[{"name":"Component Safety Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0002-9189-1595","authenticated-orcid":false,"given":"Birgit","family":"Rehmer","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0001-8839-8815","authenticated-orcid":false,"given":"Leonardo","family":"Agudo J\u00e1come","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0001-8875-6547","authenticated-orcid":false,"given":"Kai","family":"Hilgenberg","sequence":"additional","affiliation":[{"name":"Component Safety Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0002-0365-8639","authenticated-orcid":false,"given":"Alexander","family":"Evans","sequence":"additional","affiliation":[{"name":"Non\u2010Destructive Testing Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-0727-5499","authenticated-orcid":false,"given":"Birgit","family":"Skrotzki","sequence":"additional","affiliation":[{"name":"Materials Engineering Bundesanstalt f\u00fcr Materialforschung und \u2013pr\u00fcfung (BAM)  Unter den Eichen 87 Berlin 12205 Germany"}]}],"member":"311","published-online":{"date-parts":[[2024,4,17]]},"reference":[{"key":"e_1_2_8_2_1","doi-asserted-by":"publisher","DOI":"10.1007\/978-3-319-58205-4"},{"key":"e_1_2_8_3_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.actamat.2021.117240"},{"key":"e_1_2_8_4_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.pmatsci.2017.10.001"},{"key":"e_1_2_8_5_1","unstructured":"B.Merz K.Poka R.Nilsson G.Mohr K.Hilgenberg in Lasers in Manufacturing (LiM) 2023 WLT 1."},{"key":"e_1_2_8_6_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.mser.2020.100596"},{"key":"e_1_2_8_7_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.pmatsci.2022.101051"},{"key":"e_1_2_8_8_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.msea.2016.05.089"},{"key":"e_1_2_8_9_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.matchar.2019.01.028"},{"key":"e_1_2_8_10_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.pmatsci.2023.101108"},{"key":"e_1_2_8_11_1","first-page":"20","volume":"6","author":"Schneider J.","year":"2022","journal-title":"J. Manuf. Mater. Process."},{"key":"e_1_2_8_12_1","doi-asserted-by":"publisher","DOI":"10.1007\/s10853-022-07499-9"},{"key":"e_1_2_8_13_1","doi-asserted-by":"crossref","first-page":"270","DOI":"10.1007\/s11661-022-06867-z","volume":"54","author":"Sharma S.","year":"2023","journal-title":"Metall. Mater. Trans. A"},{"key":"e_1_2_8_14_1","doi-asserted-by":"crossref","first-page":"1897","DOI":"10.3390\/met11121897","volume":"11","author":"Mukhopadhyay S.","year":"2021","journal-title":"Metals"},{"key":"e_1_2_8_15_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.msea.2011.10.014"},{"key":"e_1_2_8_16_1","doi-asserted-by":"crossref","first-page":"281","DOI":"10.7449\/1994\/Superalloys_1994_281_291","volume-title":"Superalloys 718, 625, 706 and Various Derivatives","author":"Desvall\u00e9es Y.","year":"1994"},{"key":"e_1_2_8_17_1","doi-asserted-by":"crossref","first-page":"545","DOI":"10.7449\/1994\/Superalloys_1994_545_555","volume-title":"Superalloys 718, 625, 706 and Various Derivatives","author":"Li S.","year":"1994"},{"key":"e_1_2_8_18_1","doi-asserted-by":"crossref","unstructured":"B.Rehmer F.Bayram L. A.\u00c1vila Calder\u00f3n G.Mohr B.Skrotzki. BAM reference data: Temperature\u2010dependent Young's and shear modulus data for additively and conventionally manufactured variants of Ni\u2010based alloy Inconel IN718. Zenodo 2023.","DOI":"10.1038\/s41597-023-02387-6"},{"key":"e_1_2_8_19_1","volume-title":"Standard for Additive Manufacturing \u2013 Post Processing Methods \u2013 Standard Specification for Thermal Post\u2010Processing Metal Parts Made Via Powder Bed Fusion","author":"ASTM F 3301a","year":"2018"},{"key":"e_1_2_8_20_1","volume-title":"Nickel Alloy, Corrosion\u2010 and Heat\u2010Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings, 52.5Ni \u2013 19Cr \u2013 3.0Mo \u2013 5.1Cb (Nb) \u2013 0.90Ti \u2013 0.50Al \u2013 18Fe, Consumable Electrode or Vacuum Induction Melted, 1775\u2009\u00b0F (968\u2009\u00b0C) Solution and Precipitation Heat Treated","author":"SAE AMS 5663P","year":"2022"},{"key":"e_1_2_8_21_1","volume-title":"Standard Specification for Precipitation\u2010Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service","author":"ASTM B 637","year":"2018"},{"key":"e_1_2_8_22_1","volume-title":"Metallische Werkstoffe \u2013 Zugversuch \u2013 Teil 1: Pr\u00fcfverfahren bei Raumtemperatur","author":"ISO 6892\u20101","year":"2019"},{"key":"e_1_2_8_23_1","volume-title":"Metallische Werkstoffe \u2013 Zugversuch \u2013 Teil 2: Pr\u00fcfverfahren bei Erh\u00f6hter Temperatur","author":"ISO 6892\u20102","year":"2018"},{"key":"e_1_2_8_24_1","volume-title":"Metallische Werkstoffe \u2013 Erm\u00fcdungspr\u00fcfung \u2013 Einachsige Pr\u00fcfung mit der Dehnungskontrollierten Methode","author":"ISO 12106","year":"2017"},{"key":"e_1_2_8_25_1","volume-title":"Metallische Werkstoffe \u2013 Kalibrierung von L\u00e4ngen\u00e4nderungs\u2010Messeinrichtungen f\u00fcr die Pr\u00fcfung mit Einachsiger Beanspruchung (ISO 9513:2012 + Cor. 1:2013); Deutsche Fassung EN ISO 9513:2012","author":"DIN EN ISO 9513","year":"2013"},{"key":"e_1_2_8_26_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.msea.2020.140154"},{"key":"e_1_2_8_27_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.msea.2021.142223"},{"key":"e_1_2_8_28_1","volume-title":"Microbeam Analysis \u2013 Electron Backscatter Diffraction \u2013 Measurement of Average Grain Size","author":"DIN ISO 13067","year":"2021"},{"key":"e_1_2_8_29_1","doi-asserted-by":"publisher","DOI":"10.1002\/adem.202201581"},{"key":"e_1_2_8_30_1","doi-asserted-by":"publisher","DOI":"10.1002\/adem.202300819"},{"key":"e_1_2_8_31_1","doi-asserted-by":"crossref","first-page":"474","DOI":"10.1038\/s41597-023-02387-6","volume":"10","author":"Rehmer B.","year":"2023","journal-title":"Sci. Data"},{"key":"e_1_2_8_32_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.actamat.2018.08.028"},{"key":"e_1_2_8_33_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.matdes.2021.110246"},{"key":"e_1_2_8_34_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.matdes.2020.108481"},{"key":"e_1_2_8_35_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.addma.2021.101875"},{"key":"e_1_2_8_36_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.addma.2021.102347"},{"key":"e_1_2_8_37_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.matlet.2015.10.136"},{"key":"e_1_2_8_38_1","doi-asserted-by":"publisher","DOI":"10.1016\/0001-6160(88)90139-3"},{"key":"e_1_2_8_39_1","doi-asserted-by":"publisher","DOI":"10.1007\/BF02667395"},{"key":"e_1_2_8_40_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.scriptamat.2004.11.023"},{"key":"e_1_2_8_41_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.ijfatigue.2020.105598"},{"key":"e_1_2_8_42_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.ijplas.2019.09.010"},{"key":"e_1_2_8_43_1","volume-title":"Fatigue of Materials","author":"Suresh S.","year":"2004"},{"key":"e_1_2_8_44_1","doi-asserted-by":"publisher","DOI":"10.1016\/j.addma.2022.103301"}],"container-title":["Advanced Engineering Materials"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/onlinelibrary.wiley.com\/doi\/pdf\/10.1002\/adem.202302122","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2024,4,18]],"date-time":"2024-04-18T06:00:20Z","timestamp":1713420020000},"score":1,"resource":{"primary":{"URL":"https:\/\/onlinelibrary.wiley.com\/doi\/10.1002\/adem.202302122"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2024,4,17]]},"references-count":43,"alternative-id":["10.1002\/adem.202302122"],"URL":"http:\/\/dx.doi.org\/10.1002\/adem.202302122","archive":["Portico"],"relation":{},"ISSN":["1438-1656","1527-2648"],"issn-type":[{"value":"1438-1656","type":"print"},{"value":"1527-2648","type":"electronic"}],"subject":[],"published":{"date-parts":[[2024,4,17]]},"assertion":[{"value":"2023-12-11","order":0,"name":"received","label":"Received","group":{"name":"publication_history","label":"Publication History"}},{"value":"2024-04-17","order":2,"name":"published","label":"Published","group":{"name":"publication_history","label":"Publication History"}}]}}</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="date_peer_review">06.05.2024</enrichment>
    <licence>Creative Commons - CC BY - Namensnennung 4.0 International</licence>
    <author>Nadja Sonntag</author>
    <author>Benjamin Piesker</author>
    <author>Luis Ávila Calderón</author>
    <author>Gunther Mohr</author>
    <author>Birgit Rehmer</author>
    <author>Leonardo Agudo Jácome</author>
    <author>Kai Hilgenberg</author>
    <author>Alexander Evans</author>
    <author>Birgit Skrotzki</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fatigue damage</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Heat treatment</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Inconel 718</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser powder bed fusion</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Low-cycle fatigue</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Tensile strength</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">5 Werkstofftechnik</collection>
    <collection role="institutes" number="">5.1 Mikrostruktur Design und Degradation</collection>
    <collection role="institutes" number="">5.2 Metallische Hochtemperaturwerkstoffe</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei für die Öffentlichkeit verfügbar ("Open Access")</collection>
    <collection role="unnumberedseries" number="">Wissenschaftliche Artikel der BAM</collection>
    <collection role="institutes" number="">9.6 Additive Fertigung metallischer Komponenten</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
    <thesisPublisher>Bundesanstalt für Materialforschung und -prüfung (BAM)</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-bam/files/59931/Adv_Eng_Mater_2024_2302122.pdf</file>
  </doc>
  <doc>
    <id>54449</id>
    <completedYear/>
    <publishedYear>2022</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Residual stress in simple and complex geometries manufactured by laser powder bed fusion</title>
    <abstract language="eng">Design of freedom, performance improvement, cost reduction and lead time reduction are key targets when manufacturing parts in a layer-by-layer fashion using the laser powder bed fusion process (LPBF). Many research groups are focussed on improving the LPBF process to achieve the manufacturing of sound parts from a structural integrity perspective. In particular, the formation and distribution of residual stress (RS) remains a critical aspect of LPBF. The determination of the RS in LPBF benefits from the use of neutron diffraction (ND), as it allows the non-destructive mapping of the triaxial RS with a good spatial resolution. Two case studies are presented based on experiments carried out on the angular-dispersive neutron diffractometers Strain Analyser for Large Scale Engineering Applications (SALSA) (Institut Laue Langevin, Grenoble) and STRESS-Spec (FRM II, Garching). The RS in LPBF parts having a rectangular and more complex geometry (lattice structure) is analysed. The former example discusses the mapping of the RS in a rectangular body manufactured from stainless steel 316L. The manufacturing of these parts was monitored using an in-situ thermography set-up to link the RS to the thermal history. The latter discusses the RS in a lattice structure manufactured from the nickel base superalloy IN625. This geometry is challenging to characterise, and the use of a X-ray computed tomography twin is presented as tool to support the alignment of the ND experiment. The results from these case studies show a clear link between the thermal history and the RS magnitudes, as well as giving insights on the RS formation.</abstract>
    <enrichment key="eventName">1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation</enrichment>
    <enrichment key="eventPlace">Online meeting</enrichment>
    <enrichment key="eventStart">07.03.2022</enrichment>
    <enrichment key="eventEnd">10.03.2022</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Maximilian Sprengel</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>AGIL</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual Stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>X-ray and Neutron Diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive Manufacturing</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">8.0 Abteilungsleitung und andere</collection>
  </doc>
  <doc>
    <id>51793</id>
    <completedYear/>
    <publishedYear>2020</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Separation of the Formation Mechanisms of Residual Stresses in LPBF 316L</title>
    <abstract language="eng">Rapid cooling rates and steep temperature gradients are characteristic of additively manufactured parts and important factors for the residual stress formation. This study examined the influence of heat accumulation on the distribution of residual stress in two prisms produced by Laser Powder Bed Fusion (LPBF) of austenitic stainless steel 316L. The layers of the prisms were exposed using two different border fill scan strategies: one scanned from the centre to the perimeter and the other from the perimeter to the centre. The goal was to reveal the effect of different heat inputs on samples featuring the same solidification shrinkage. Residual stress was characterised in one plane perpendicular to the building direction at the mid height using Neutron and Lab X-ray diffraction. Thermography data obtained during the build process were analysed in order to correlate the cooling rates and apparent surface temperatures with the residual stress results. Optical microscopy and micro computed tomography were used to correlate defect populations with the residual stress distribution. The two scanning strategies led to residual stress distributions that were typical for additively manufactured components: compressive stresses in the bulk and tensile stresses at the surface. However, due to the different heat accumulation, the maximum residual stress levels differed. We concluded that solidification shrinkage plays a major role in determining the shape of the residual stress distribution, while the temperature gradient mechanism appears to determine the magnitude of peak residual stresses.</abstract>
    <enrichment key="eventName">MLZ User Meeting 2020</enrichment>
    <enrichment key="eventPlace">Online meeting</enrichment>
    <enrichment key="eventStart">08.12.2020</enrichment>
    <enrichment key="eventEnd">10.12.2020</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>Alexander Ulbricht</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Computed tomography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Neutron diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>X-ray diffraction</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Additive manufacturing</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Residual stress</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Thermography</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>LPBF</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Laser Powder Bed Fusion</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="institutes" number="">8 Zerstörungsfreie Prüfung</collection>
    <collection role="institutes" number="">8.5 Röntgenbildgebung</collection>
    <collection role="institutes" number="">9 Komponentensicherheit</collection>
    <collection role="institutes" number="">9.3 Schweißtechnische Fertigungsverfahren</collection>
    <collection role="institutes" number="">9.4 Integrität von Schweißverbindungen</collection>
    <collection role="themenfelder" number="">Material</collection>
    <collection role="themenfelder" number="">Degradationsmechanismen</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
    <collection role="institutes" number="">8.0 Abteilungsleitung und andere</collection>
    <collection role="themenfelder" number="">Additive Fertigung</collection>
  </doc>
</export-example>
