<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>30096</id>
    <completedYear/>
    <publishedYear>2014</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>17</pageFirst>
    <pageLast>24</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>34</volume>
    <type>article</type>
    <publisherName>Elsevier Science</publisherName>
    <publisherPlace>Amsterdam [u.a.]</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Impact of biodiesel sorption on mechanical properties of polyethylene</title>
    <abstract language="eng">The time-dependent sorption of biodiesel in a typical polyethylene for container applications is investigated in comparison to conventional diesel fuel at three different temperatures. In this context, the desorption behavior is also addressed. Subsequently, the effects of both penetrants on mechanical properties are characterized in terms of impact strength and dynamic-mechanical analysis. The discussion of property changes is firstly based on the sorption kinetics of biodiesel and diesel, which is determined by immersion experiments allowing for the calculation of respective diffusion coefficients. Changes in impact strength as determined by the Charpy method are further characterised in more detail by analyzing the fracture surfaces, and correlated with results of dynamic-mechanical analysis.</abstract>
    <parentTitle language="eng">Polymer Testing</parentTitle>
    <identifier type="old">33043</identifier>
    <identifier type="doi">10.1016/j.polymertesting.2013.12.003</identifier>
    <identifier type="issn">0142-9418</identifier>
    <enrichment key="date_peer_review">03.02.2014</enrichment>
    <author>Martin Böhning</author>
    <author>Ute Niebergall</author>
    <author>Adeline Adam</author>
    <author>Wolfgang Stark</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Biodiesel</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Fuel sorption</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Desorption</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Impact strength</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Dynamic-mechanical analysis</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PE-HD</value>
    </subject>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
  </doc>
  <doc>
    <id>35843</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods</title>
    <abstract language="eng">Technically high-quality hollow articles made of polyethylene have proved many times their value as dangerous goods packagings. Design type tests according to the international regulations for the transport of dangerous goods - drop test, stacking test, hydraulic pressure test and leakproofness test must be performed for every design type and manufacturer. The properties melt flow rate (MFR), relative density (D), low temperature notched Impact strength (N.I.S.) at -30 °C, environmental stress crack resistance (FNCT) and resistance to oxidative degradation Ox by nitric acid (determined by the increase of MFR) have been selected together with the corresponding test methods and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for dangerous goods packagings and intermediate bulk containers (IBCs) – EN 15507. We wanted to proof the practical relevance of this standard by comparing the relationship between the results of the FNCT and the times to failure of design types in stacking tests with wetting solution and normal butyl acetate saturated wetting solution.</abstract>
    <enrichment key="eventName">EUROCORR 2010</enrichment>
    <enrichment key="eventPlace">Moscow, Russia</enrichment>
    <enrichment key="eventStart">13.09.2010</enrichment>
    <enrichment key="eventEnd">17.09.2010</enrichment>
    <author>Margit Weltschev</author>
    <author>Ute Niebergall</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Drop test</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Stacking test</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Hydraulic pressure test</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Leakproofness test</value>
    </subject>
    <collection role="ddc" number="624">Ingenieurbau</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>39006</id>
    <completedYear/>
    <publishedYear>2017</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>130</pageFirst>
    <pageLast>139</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>191</volume>
    <type>article</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Effect of different sulphur-based crosslink networks on the nitrile rubber resistance to biodiesel</title>
    <abstract language="eng">Biodiesel possesses some comparable physical properties to petroleum diesel in addition to its improved environmental benefits. Nonetheless, both fuels differ greatly with respect to their chemical compositions.&#13;
Therefore, the compatibility of the materials, which are commonly employed in contact with diesel, must also be assured for biodiesel. This paper assessed the influence of sulphur-based curing systems on the resistance of nitrile rubber to soybean biodiesel. Formulations were prepared using highacrylonitrile-content nitrile rubber by employing a two-level experimental design. The amounts of two different accelerators and sulphur were varied to achieve different types of vulcanisation systems.&#13;
Thermal analyses, mechanical tests and microscopy analyses were conducted to evaluate the behaviour of the material after contact with biodiesel. The results showed that the choice of the accelerator played an important role on the resistance of the rubber to the biofuel, and crosslink density was not a key factor with respect to the resistance.</abstract>
    <parentTitle language="eng">Fuel</parentTitle>
    <identifier type="doi">10.1016/j.fuel.2016.11.060</identifier>
    <identifier type="issn">0016-2361</identifier>
    <identifier type="issn">1873-7153</identifier>
    <enrichment key="date_peer_review">20.01.2017</enrichment>
    <author>F.N. Linhares</author>
    <author>M. Kersch</author>
    <author>Ute Niebergall</author>
    <author>M.Ch.A.M. Leite</author>
    <author>V. Altstädt</author>
    <author>C.R.G. Furtado</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Soyean oil</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Nitrile rubber</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Compatibility</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Vulcanisation system</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Biodiesel</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Resistance</value>
    </subject>
    <collection role="ddc" number="620">Ingenieurwissenschaften und zugeordnete Tätigkeiten</collection>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
  </doc>
  <doc>
    <id>18070</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Full Notch Creep Test - ISO Round Robin Test</title>
    <parentTitle language="deu">Polymer Processing Society</parentTitle>
    <identifier type="old">20170</identifier>
    <enrichment key="eventName">Polymer Processing Society</enrichment>
    <enrichment key="eventPlace">Salerno, Italy</enrichment>
    <enrichment key="eventStart">2008-06-15</enrichment>
    <enrichment key="eventEnd">2008-06-19</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>20380</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Full Notch Creep Test for evaluation of PE-HD materials for container and pipes</title>
    <parentTitle language="deu">Eurocorr 2009</parentTitle>
    <identifier type="old">22671</identifier>
    <enrichment key="eventName">Eurocorr 2009</enrichment>
    <enrichment key="eventPlace">Nice, France</enrichment>
    <enrichment key="eventStart">2009-11-06</enrichment>
    <enrichment key="eventEnd">2009-11-11</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>18257</id>
    <completedYear/>
    <publishedYear>2008</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>6</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation>Polymer Processing Society</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Full Notch Creep Test - ISO Round Robin test</title>
    <parentTitle language="eng">PPS-24 - 24th Annual Meeting of the polymer processing society</parentTitle>
    <identifier type="old">20381</identifier>
    <enrichment key="bibliotheksstandort">Sonderstandort: Publica-Schrank</enrichment>
    <enrichment key="eventName">The Polymer Processing Society 24th Annual Meeting (PPS-24)</enrichment>
    <enrichment key="eventPlace">Salerno, Italy</enrichment>
    <enrichment key="eventStart">2008-06-15</enrichment>
    <enrichment key="eventEnd">2008-06-19</enrichment>
    <author>Ute Niebergall</author>
    <author>O. Mertlová</author>
    <author>E. Nezbedová</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Full Notch Creep Test (FNCT)</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Spannungsrissempfindlichkeit</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Zeitstandzugversuch</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Medium</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Netzmittellösung</value>
    </subject>
    <collection role="fulltextaccess" number="">Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")</collection>
    <collection role="literaturgattung" number="">Graue Literatur</collection>
  </doc>
  <doc>
    <id>20497</id>
    <completedYear/>
    <publishedYear>2009</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>6</pageLast>
    <pageNumber/>
    <edition/>
    <issue>SS 9-O-7965</issue>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation>DECHEMA</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Full notch creep test for evaluation of PE-HD materials for container and pipes</title>
    <parentTitle language="eng">EUROCORR 2009 - Corrosion from the nanoscale to the plant</parentTitle>
    <identifier type="old">22801</identifier>
    <enrichment key="bibliotheksstandort">Sonderstandort: Publica-Schrank</enrichment>
    <enrichment key="eventName">EUROCORR 2009</enrichment>
    <enrichment key="eventPlace">Nice, France</enrichment>
    <enrichment key="eventStart">2009-09-06</enrichment>
    <enrichment key="eventEnd">2009-09-10</enrichment>
    <author>Ute Niebergall</author>
    <author>O. Mertlova</author>
    <author>E. Nezbedova</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>FNCT</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Container</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Pipes</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>PE-HD materials</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Round robin test</value>
    </subject>
    <collection role="fulltextaccess" number="">Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")</collection>
    <collection role="literaturgattung" number="">Graue Literatur</collection>
  </doc>
  <doc>
    <id>21974</id>
    <completedYear/>
    <publishedYear>2010</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>6</pageLast>
    <pageNumber/>
    <edition/>
    <issue>324</issue>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>DECHEMA</publisherName>
    <publisherPlace>Moscow</publisherPlace>
    <creatingCorporation>European Federation of Corrosion</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods</title>
    <abstract language="eng">Resistance to stress cracking by wetting solution is one of the selected properties together with the corresponding test method FNCT and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for packagings and intermediate bulk containers (IBCs) for the transport of dangerous goods.
The environmental stress crack resistance determined by Full Notch Creep Test (FNCT) represents the impacts from the stacking tests at 40 °C performed with standard liquid wetting solution (without pre-storage) and with normal butyl acetate saturated wetting solution (pre-storage with normal butyl acetate).
Environmental stress crack resistance determined with FNCT for the polyethylene grades was related to the times to failure of different jerrican samples made of these grades in stacking tests with 5% wetting solution and a n-butyl acetate saturated wetting solution (pre-storage with n-butyl acetate) at 40 °C. The FNCT is suitable for comparison of polyethylene grades in relation to environmental stress crack resistance independent of their use as drum, IBC or jerrican material. The stiffness of polyethylene grades should be taken into account to the comparison as jerricans are not only chemically but also mechanically stressed.</abstract>
    <parentTitle language="eng">EUROCORR 2010 - From the earth´s depths to space heights</parentTitle>
    <identifier type="old">24445</identifier>
    <note>Serientitel: EFC-Event – Series title: EFC-Event</note>
    <enrichment key="bibliotheksstandort">Sonderstandort: Publica-Schrank</enrichment>
    <enrichment key="eventName">EUROCORR 2010</enrichment>
    <enrichment key="eventPlace">Moscow, Russia</enrichment>
    <enrichment key="eventStart">2010-09-13</enrichment>
    <enrichment key="eventEnd">2010-09-17</enrichment>
    <author>Margit Weltschev</author>
    <author>Ute Niebergall</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Polyethylenformstoffe</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Gefahrgutverpackungen</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Spannungsrissbeständigkeit</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Stapeldruckprüfungen</value>
    </subject>
    <collection role="fulltextaccess" number="">Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")</collection>
    <collection role="literaturgattung" number="">Graue Literatur</collection>
  </doc>
  <doc>
    <id>23834</id>
    <completedYear/>
    <publishedYear>2011</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>1</pageFirst>
    <pageLast>4</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation>Polymer Processing Society</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of packagings for the transport of dangerous goods</title>
    <abstract language="eng">Resistance to stress cracking by wetting solution is one of the selected properties together with the corresponding test method FNCT and tolerances for a comparison of polyethylene grades of one design type in the procedural rule on suitability proof for alternative plastic resins used for packagings and intermediate bulk Containers (IBCs) for the transport of dangerous goods.&#13;
The environmental stress crack resistance determined by Full Notch Creep Test (FNCT) represents the impacts from the stacking tests at 40 °C performed with Standard liquid wetting solution (without pre-storage) and with normal butyl acetate saturated wetting solution (pre-storage with normal butyl acetate). Environmental stress crack resistance determined with FNCT for the polyethylene grades was related to the times to failure of different jerrican samples made of these grades in stacking tests with 5 % wetting solution and a n-butyl acetate saturated wetting solution (pre-storage with n-butyl acetate) at 40 °C. The FNCT is suitable for comparison of polyethylene grades in relation to environmental stress crack resistance independent of their use as drum, IBC or jerrican material. The stiffness of polyethylene grades should be taken into account to the comparison as jerricans are not only chemically but also mechanically stressed.</abstract>
    <parentTitle language="eng">PPS-27 - 27th World congress of the polymer processing society</parentTitle>
    <identifier type="old">26437</identifier>
    <enrichment key="eventName">PPS-27 - 27th World congress of the polymer processing society</enrichment>
    <enrichment key="eventPlace">Marrakech, Morocco</enrichment>
    <enrichment key="eventStart">10.05.2011</enrichment>
    <enrichment key="eventEnd">14.05.2011</enrichment>
    <author>Ute Niebergall</author>
    <author>Margit Weltschev</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Gefahrgutverpackungen</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Polyethylenformstoffe</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Full notch creep test</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Stapeldruckprüfung</value>
    </subject>
    <collection role="fulltextaccess" number="">Datei im Netzwerk der BAM verfügbar ("Closed Access")</collection>
    <collection role="literaturgattung" number="">Graue Literatur</collection>
  </doc>
  <doc>
    <id>23771</id>
    <completedYear/>
    <publishedYear>2011</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Comparison of the stress crack resistance of polyethylene grades with the test performance behaviour of the transport of dangerous goods</title>
    <parentTitle language="deu">PPS 27 World Congress of the Polymer Processing Society</parentTitle>
    <identifier type="old">26372</identifier>
    <enrichment key="eventName">PPS 27 World Congress of the Polymer Processing Society</enrichment>
    <enrichment key="eventPlace">Marrakesh, Morocco</enrichment>
    <enrichment key="eventStart">2011-05-09</enrichment>
    <enrichment key="eventEnd">2011-05-14</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>5763</id>
    <completedYear/>
    <publishedYear>1994</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Struktur und Eigenschaften von PE/PP-Blends</title>
    <parentTitle language="deu">Polymerwerkstoffe 94</parentTitle>
    <identifier type="old">6113</identifier>
    <enrichment key="eventName">Polymerwerkstoffe 94</enrichment>
    <enrichment key="eventPlace">Merseburg, Germany</enrichment>
    <enrichment key="eventStart">1994-09-27</enrichment>
    <enrichment key="eventEnd">1994-09-29</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>7507</id>
    <completedYear/>
    <publishedYear>2001</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Schädigungsnachweis in kurzglasfaserverstärkten Thermoplasten mittels ortsauflösender ZfP-Methoden</title>
    <parentTitle language="deu">8. Tagung Problemseminar Deformations- und Bruchverhalten von Kunststoffen</parentTitle>
    <identifier type="old">7962</identifier>
    <enrichment key="eventName">8. Tagung Problemseminar Deformations- und Bruchverhalten von Kunststoffen</enrichment>
    <enrichment key="eventPlace">Halle (Saale), Germany</enrichment>
    <enrichment key="eventStart">2001-06-20</enrichment>
    <enrichment key="eventEnd">2001-06-22</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>7483</id>
    <completedYear/>
    <publishedYear>2002</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Facture Behaviour and Mechanismus in HDPE/PP-Blends</title>
    <parentTitle language="eng">7th European Symposium Polymer Blends</parentTitle>
    <identifier type="old">7937</identifier>
    <enrichment key="eventName">7th European Symposium Polymer Blends</enrichment>
    <enrichment key="eventPlace">Villeurbanne, France</enrichment>
    <enrichment key="eventStart">2002-05-27</enrichment>
    <enrichment key="eventEnd">2002-05-29</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>10755</id>
    <completedYear/>
    <publishedYear>2005</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>412</pageFirst>
    <pageLast>418</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>143</volume>
    <type>article</type>
    <publisherName>Thieme</publisherName>
    <publisherPlace>Stuttgart</publisherPlace>
    <creatingCorporation>Deutsche Orthopädische Gesellschaft</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Die kopferhaltende operative Versorgung der traumatischen medialen Schenkelhalsfraktur mit Großfragmentschrauben - eine biomechanische Prüfung</title>
    <abstract language="deu">Studienziel: Bei der zunehmenden Überalterung der Bevölkerung und der zunehmenden Inzidenz an hüftgelenknahen Oberschenkelfrakturen nimmt die Frage der Versorgung der medialen Schenkelhalsfraktur eine zunehmende Rolle ein. Vor allem aus Ungarn und den skandinavischen Ländern wird die kopferhaltende Therapie propagiert. Das Redislozieren dieser Frakturen und die Hüftkopfnekrose sind jedoch dagegenstehende Probleme. Methode: Ermutigt durch zwei theoretische mathematische Überlegungen wurden in einem biomechanischen Experiment zwei verschiedene Möglichkeiten der Verschraubung der medialen Schenkelhalsfraktur erprobt. Ergebnisse: Als Ergebnis zeigte sich, dass eine kopferhaltende Versorgung mit 2 kranial liegenden Schrauben und einer dreipunktabgestützten Schraube am Adam'schen Bogen deutliche biomechanische Vorteile hat gegenüber der herkömmlichen Verschraubung. Schlussfolgerung: Dies ermutigt uns, zunehmend die minimalinvasive und kopferhaltende Versorgung der medialen Schenkelhalsfraktur insbesondere bei Pauwels-I- und II-Verletzungen einzusetzen.</abstract>
    <parentTitle language="deu">Zeitschrift für Orthopädie und ihre Grenzgebiete</parentTitle>
    <identifier type="old">12370</identifier>
    <identifier type="doi">10.1055/s-2005-836807</identifier>
    <identifier type="issn">0044-3220</identifier>
    <enrichment key="bibliotheksstandort">Sonderstandort: Publica-Schrank</enrichment>
    <author>J. Kühling</author>
    <author>J. Schmidt</author>
    <author>T. Dahn</author>
    <author>Ute Niebergall</author>
    <author>G. Bogusch</author>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Mediale Schenkelhalsfraktur</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Schraubenosteosynthese</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Biomechanik</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Medial hip fracture</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Osteosynthesis with screw</value>
    </subject>
    <subject>
      <language>deu</language>
      <type>uncontrolled</type>
      <value>Biomechanics</value>
    </subject>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")</collection>
  </doc>
  <doc>
    <id>10843</id>
    <completedYear/>
    <publishedYear>2005</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>76</pageFirst>
    <pageLast>81</pageLast>
    <pageNumber/>
    <edition/>
    <issue>2</issue>
    <volume>13</volume>
    <type>article</type>
    <publisherName>Thieme</publisherName>
    <publisherPlace>Stuttgart</publisherPlace>
    <creatingCorporation>Gerhard-Küntscher-Kreis</creatingCorporation>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Stability of Screw Fixation of Femoral Neck Fractures - A Biomechanical Trial</title>
    <abstract language="eng">With a growing percentage of elderly people in the population and, correspondingly, an increasing rate of fractures of the proximal femur, the question how to stabilize medial femoral-neck fractures is gaining increasing importance. Especially in Hungary and Scandinavian countries, femoral-head-preserving surgery is advocated. However, the main problems of this procedure are re-dislocation and necrosis of the femoral head. Encouraged by two theoretical mathematical considerations, a biomechanical experiment was performed to investigate two different methods of screw fixation of medial femoral-neck fractures. The results showed that a head-preserving internal fixation with two cranial screws and a three-point supported screw at the bottom of the neck had distinct biomechanical advantages compared to conventional screw fixation. This has encouraged us to more frequently perform this minimally invasive and head-preserving surgery in Pauwels I and II medial fractures of the femoral head.</abstract>
    <parentTitle language="eng">Osteosynthesis and trauma care</parentTitle>
    <identifier type="old">12460</identifier>
    <identifier type="doi">10.1055/s-2005-836332</identifier>
    <identifier type="issn">1618-971X</identifier>
    <enrichment key="bibliotheksstandort">Sonderstandort: Publica-Schrank</enrichment>
    <author>J. Schmidt</author>
    <author>R. Letsch</author>
    <author>J. Kühling</author>
    <author>T. Baranek</author>
    <author>Ute Niebergall</author>
    <author>G. Bogusch</author>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Femoral neck fracture</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Screw fixation</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Biomechanical stability</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Cadaver experiment</value>
    </subject>
    <subject>
      <language>eng</language>
      <type>uncontrolled</type>
      <value>Mathematical model</value>
    </subject>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")</collection>
  </doc>
  <doc>
    <id>3533</id>
    <completedYear/>
    <publishedYear>2004</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst>71</pageFirst>
    <pageLast>77</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume>34</volume>
    <type>article</type>
    <publisherName>Thieme</publisherName>
    <publisherPlace>Stuttgart</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Die distale Unterschenkelverriegelungsnagelung - eine statische Prüfung</title>
    <abstract language="deu">Studienziel: Zwei Nagelsysteme, zum einen der unaufgebohrte Tibianagel mit 3fach-Verriegelung in 2 Ebenen und großem Bolzenspiel (UTN® der Fa. Mathys®) mit der Möglichkeit von medial zweifach und von ventral einfach zu verriegeln und zum anderen der unaufgebohrte Tibianagel mit 3fach-Verriegelung in einer Ebene mit geringem Bolzenspiel (Targon®-Nagel der Fa. Aesculap®), der 3 mediale Verriegelungsmöglichkeiten besitzt, wurden im Biegeversuch statisch geprüft. Anatomisch besteht bei der ventralen Verriegelung immer die Verletzungsmöglichkeit von Sehnen, Nerven und Gefäßen. Andererseits besteht bei einem höheren Bolzenspiel immer ein höherer Instabilitätsgrad. Inwieweit ist die Verriegelung in zwei Ebenen notwendig?

Methode: Wir prüften statisch zwei intramedulläre Verriegelungssysteme an 8 Leichenknochen (matched pairs) in zwei Ebenen an einer Universalprüfmaschine der Firma Schenk-Trebel im Biegeversuch.

Ergebnisse: Die Untersuchungsergebnisse zeigen, dass nicht die Bolzenlage, sondern das so genannte Bolzenspiel für die Stabilität der distalen Fragmente entscheidend ist. Die Verriegelung sollte somit prinzipiell durch ein formschlüssiges winkelstabiles Bolzensystem möglich sein.</abstract>
    <parentTitle language="deu">Aktuelle Traumatologie</parentTitle>
    <identifier type="old">3663</identifier>
    <identifier type="doi">10.1055/s-2004-817964</identifier>
    <identifier type="issn">0044-6173</identifier>
    <identifier type="issn">1438-9436</identifier>
    <identifier type="issn">0935-0705</identifier>
    <enrichment key="bibliotheksstandort">Sonderstandort: Publica-Schrank</enrichment>
    <author>J. Kühling</author>
    <author>Ute Niebergall</author>
    <author>D. Calmez</author>
    <author>W. Schnorr</author>
    <author>J. Schmidt</author>
    <collection role="literaturgattung" number="">Verlagsliteratur</collection>
    <collection role="fulltextaccess" number="">Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")</collection>
  </doc>
  <doc>
    <id>4227</id>
    <completedYear/>
    <publishedYear>2004</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Ergebnisvergleich von HDPE-Werkstoffe im Gefahrgutbereich</title>
    <parentTitle language="deu">Erfahrungsaustausch über die entstandenen Probleme bei Anwendung der BAM GGR 003, 9. September 2004</parentTitle>
    <identifier type="old">4416</identifier>
    <enrichment key="eventName">Erfahrungsaustausch über die entstandenen Probleme bei Anwendung der BAM GGR 003, 9. September 2004</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">2004-09-09</enrichment>
    <enrichment key="eventEnd">2004-09-09</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>11799</id>
    <completedYear/>
    <publishedYear>1994</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>463</pageFirst>
    <pageLast>466</pageLast>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>conferenceobject</type>
    <publisherName>Institute of Materials</publisherName>
    <publisherPlace>London</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Thermoluminescence of PEHD/PP Blends</title>
    <parentTitle language="eng">Preprint papers / Polymat '94</parentTitle>
    <identifier type="old">13482</identifier>
    <enrichment key="eventName">Polymat '94</enrichment>
    <enrichment key="eventPlace">London, England, UK</enrichment>
    <enrichment key="eventStart">1994-09-19</enrichment>
    <enrichment key="eventEnd">1994-09-22</enrichment>
    <author>Ralf Kunze</author>
    <author>Werner Mielke</author>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Graue Literatur</collection>
  </doc>
  <doc>
    <id>12642</id>
    <completedYear/>
    <publishedYear>2006</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>poster</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Full Notch Creep Test - ISO Round Robin Test</title>
    <parentTitle language="eng">Plastics Pipes XIII</parentTitle>
    <identifier type="old">14377</identifier>
    <enrichment key="eventName">Plastics Pipes XIII</enrichment>
    <enrichment key="eventPlace">Washington, D.C., USA</enrichment>
    <enrichment key="eventStart">2006-10-02</enrichment>
    <enrichment key="eventEnd">2006-10-05</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
  <doc>
    <id>11361</id>
    <completedYear/>
    <publishedYear>2005</publishedYear>
    <thesisYearAccepted/>
    <language>deu</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber/>
    <edition/>
    <issue/>
    <volume/>
    <type>lecture</type>
    <publisherName/>
    <publisherPlace/>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>0</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="deu">Neue Verfahren zum Vergleich von Kunststoffen und zum Nachweis der chemischen Verträglichkeit durch Labormethoden</title>
    <parentTitle language="deu">Gefahrgut-Technik-Tage</parentTitle>
    <identifier type="old">13012</identifier>
    <enrichment key="eventName">Gefahrgut-Technik-Tage</enrichment>
    <enrichment key="eventPlace">Berlin, Germany</enrichment>
    <enrichment key="eventStart">2005-11-10</enrichment>
    <enrichment key="eventEnd">2005-11-12</enrichment>
    <enrichment key="InvitedTalks">0</enrichment>
    <author>Ute Niebergall</author>
    <collection role="fulltextaccess" number="">Weder Datei noch physisches Exemplar vorhanden ("No Access")</collection>
    <collection role="literaturgattung" number="">Präsentation</collection>
  </doc>
</export-example>
