Dokument-ID Dokumenttyp Autoren/innen Persönliche Herausgeber/innen Haupttitel Abstract Auflage Verlagsort Verlag Herausgeber (Institution) Erscheinungsjahr Titel des übergeordneten Werkes Jahrgang/Band ISBN Veranstaltung Veranstaltungsort Beginndatum der Veranstaltung Enddatum der Veranstaltung Ausgabe/Heft Erste Seite Letzte Seite URN DOI Lizenz Datum der Freischaltung OPUS4-53968 Vortrag Kalinka, Gerhard Optische Beobachtungen der Faser-Matrix-Trennung im Pull-out-Versuch Der Vortrag behandelt Rissentstehung und Ausbreitung an Faser-Matrix-Interfaces, untersucht mit dem optischen Mikroskop. 2021 Composites United, CU-Arbeitsgruppe/n Faser-Matrix-Haftung & Matrices Online meeting 02.12.2021 02.12.2021 2021-12-10 OPUS4-58094 Vortrag Trappe, Volker; Kalinka, Gerhard; Loose, Florian Carbon fibre composites exemplarily research at BAM Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given. 2023 Meeting KCarbon Berlin, Germany 15.06.2023 2023-10-27 OPUS4-39128 Zeitschriftenartikel Kalinka, Gerhard; ElAbshihy, K. Circumventing boundary effects while characterizing epoxy/copper interphases using nanoindentation Characterization of the size and mechanical properties of interphases is essential when designing multicomponent materials. When nanoindentation is used to investigate the size and mechanical properties of an interphase, a common challenge is that the indenter or the stress zone formed around it are often restricted by the reinforcement, making it difficult to distinguish the mechanical property variations caused by the interphase itself from those caused by the boundary effect. In this work, a testing system was developed that allows determining the indent affected zone and accounting for it in the interphase measurements of an epoxy/Cu system. Using finite element analysis, we confirmed the validity of the proposed system. Nanoindentation was used to investigate the Interphase between copper and two different epoxy systems; amine-cured and anhydride-cured. Nanoindentation results showed that a copper layer that is only 10 nm thick still exhibits a constriction effect on the indentations in its vicinity. The amine-cured epoxy did not show any sign of interphase existence using the introduced method. However, a soft interphase with a thickness of ~1.7 μm was measured on theanhydride-cured epoxy. Furthermore, we show that the proposed system can be used to determine the interphase thickness as well as its relative mechanical properties regardless of the indentation depth. This system can be further used for investigating other polymer/metal interphases to better understand the factors influencing them, thus helping engineer the interphase size and properties to enhance composite performance. UK Taylor & Francis 2017 Composite Interfaces 24 9 833 848 10.1080/09276440.2017.1286878 2017-02-09 OPUS4-59053 Vortrag Kalinka, Gerhard Testing the fibre matrix interface of short glass fibre reinforced PMCs with using the push out technique With this presentation, the push-out technique is explained. The focus of the experimental work is on the characterization of the fiber-matrix interface of short fiber reinforced composites. The reinforcing component was glass fibers and the matrix polymer was PA6.6 and PPA. It is demonstrated for the first time that the push-out technique ca be applied on injection molded short fiber PMC and is sensitive to the mechanical interface properties. Further studies are planned on the influence of multiple processing, the temperature and humidity. 2023 Composirtes United Workshop „Fiber Matrix Interphases“ Online meeting 09.11.2023 09.11.2023 2023-12-07 OPUS4-45433 Zeitschriftenartikel Taketa, I.; Kalinka, Gerhard; Gorbatikh, L.; Lomov, S.; Verpoest, I. Influence of cooling rate on the properties of carbon fiber unidirectional composites with polypropylene, polyamide 6, and polyphenylene sulfide matrices The longitudinal and transverse strength of three unidirectional thermoplastic prepreg systems: carbon fiber/polypropylene (CF/PP), polyamide 6 (CF/PA6), and polyphenylene sulfide (CF/PPS) are studied and analytical formulas are proposed for the estimation of matrix and fiber/matrix interface properties from composites properties. Since the matrices are semi-crystalline thermoplastics, the influence of cooling rate on the strength is statistically evaluated. While the 0° tensile strength is found to be independent of the cooling rate, the 90° tensile strength is strongly influenced by the matrix type and cooling rate. The matrix modulus increases as the cooling rate is decreased; the degree of crystallinity also increases. The matrix residual stress, interfacial shear strength, and mode II interlaminar fracture toughness are also found to depend on the cooling rate, with the trends different for different matrices. London Taylor & Francis The Japan Society for Composite Materials 2020 Advanced composite materials 29 1 101 113 10.1080/09243046.2019.1651083 2018-07-11 OPUS4-24341 Zeitschriftenartikel Michaeli, W.; Baranowski, T.; Kalinka, Gerhard Einfluss der Mikrostruktur auf den Druck- und Zug-E-Modul teilkristalliner Kunststoffe In Kooperation zwischen dem Institut für Kunststoffverarbeitung (IKV) und der Bundesanstalt für Materialforschung und -prüfung (BAM) wurde das mechanische Verhalten unter Druck- und Zugbelastung unterschiedlicher morphologischer Strukturen teilkristalliner Thermoplaste (PP und POM) untersucht. Im Ergebnis steigt der E-Modul sowohl der druck- wie auch zugbelasteten Prüfkörper aus spritzgegossenem PP und POM mit gröberem Gefüge an. Probekörper mit scherinduziertem Gefüge zeigen einen hohen Einfluss des Kristallisationsgrads auf den E-Modul. München Hanser Bundesanstalt für Materialforschung und -prüfung 2011 Materials testing 53 10 616 628 2016-02-19 OPUS4-4703 Posterpräsentation Kalinka, Gerhard Micro indentation near stiff-soft phase boundaries 2004 Polydays 2004 Polydays 2004 Potsdam, Germany 2004-10-04 2004-10-06 2016-02-19 OPUS4-13804 Vortrag Kalinka, Gerhard Testing the interface shear strength of carbon fibre reinforced composites 2006 Polydays 2006 Polydays 2006 Berlin, Germany 2006-10-04 2016-02-19 OPUS4-12090 Vortrag Hinrichs, Volker Dynamische Einzelfaserbelastung 1997 Berliner Polymerentage Berliner Polymerentage Berlin, Germany 1997-10-09 1997-10-11 2016-02-19 OPUS4-12094 Posterpräsentation Kalinka, Gerhard Ermüdungsverhalten von faserverstärkten Thermoplasten 1989 Präsentationsveranstaltung des Berliner Verbands für Polymerforschung Präsentationsveranstaltung des Berliner Verbands für Polymerforschung Berlin, Germany 1989-05-18 2016-02-19 OPUS4-32039 Vortrag Kalinka, Gerhard Verbundwerkstoffe als Energiespeicher 2014 4. Umwelt- und Technologietag, Fa. Brose 4. Umwelt- und Technologietag, Fa. Brose Coburg, Deutschland 2014-09-25 2016-02-20 OPUS4-20057 Vortrag Marotzke, Christian Failure Processes in Fiber Reinforced Polymers 2009 Thermosets 2009 Thermosets 2009 Berlin, Germany 2009-09-30 2009-10-02 2016-02-19 OPUS4-12104 Posterpräsentation Kalinka, Gerhard Untersuchung der Phasenhaftung in Verbundwerkstoffen mit dem Faser-Eindrückversuch 1998 Wissensbörse - Präparationstechnik und Analytik Berlin, Germany 19.02.1998 2016-02-19 OPUS4-6085 Posterpräsentation Kalinka, Gerhard Bestimmung der Interface-Festigkeit in carbonfaserverstärkten Werkstoffen 2005 Verbundwerkstoffe und Werkstoffverbunde Verbundwerkstoffe und Werkstoffverbunde Kassel, Germany 06.04.2005 08.04.2005 2016-02-19 OPUS4-4088 Vortrag Kalinka, Gerhard Mikromechanik 2003 BAM, DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" BAM, DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" Berlin, Germany 2003-12-05 2016-02-19 OPUS4-12097 Posterpräsentation Kalinka, Gerhard Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test 1995 Verbundwerkstoffe und Werkstoffverbunde Verbundwerkstoffe und Werkstoffverbunde Bayreuth, Germany 1995-10-24 1995-10-25 2016-02-19 OPUS4-15858 Vortrag Kalinka, Gerhard Mikromechanische Methoden zur Messung der Faser-Matrix-Haftung in Polymermatrix-Verbundwerkstoffen 2007 Kolloquium des Fraunhofer IZM Kolloquium des Fraunhofer IZM Teltow, Germany 2007-07-20 2016-02-19 OPUS4-12007 Vortrag Kalinka, Gerhard Computersimulation der lamellar-shpärolithischen Kristallisation bei Polymeren 1994 5. Berliner Polymeren-Tage 5. Berliner Polymeren-Tage Potsdam, Germany 1994-10-05 1994-10-07 2016-02-19 OPUS4-12008 Vortrag Kalinka, Gerhard Charakterisierung des Faser-Matrix-Interface mit dem Indentation-Test 1995 Verbundwerkstoffe und Werkstoffverbunde Verbundwerkstoffe und Werkstoffverbunde Bayreuth, Germany 1995-10-25 1995-10-27 2016-02-19 OPUS4-6084 Vortrag Kalinka, Gerhard Bestimmung der Interface-Festigkeit oder -Trennarbeit mit dem Pull-out-Versuch 2005 Verbundwerkstoffe und Werkstoffverbunde Verbundwerkstoffe und Werkstoffverbunde Kassel, Germany 2005-04-06 2005-04-08 2016-02-19 OPUS4-20123 Vortrag Kalinka, Gerhard Local mechanical relaxation time spectroscopy with using the nano indentation technique 2009 THERMOSETS 2009 THERMOSETS 2009 Berlin, Germany 2009-10-01 2009-10-03 2016-02-19 OPUS4-12096 Posterpräsentation Kalinka, Gerhard Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden 1994 5. Berliner Polymeren-Tage 5. Berliner Polymeren-Tage Potsdam, Germany 1994-10-05 1994-10-07 2016-02-19 OPUS4-23289 Posterpräsentation Kalinka, Gerhard Single Fiber Pull-out Test 2010 4th International CFK-Valley Stade Convention 4th International CFK-Valley Stade Convention Stade, Germany 2010-06-15 2010-06-16 2016-02-19 OPUS4-12088 Vortrag Hampe, Andreas Bruchzähigkeit und Phasenhaftung von unidirektionalen PP/GF-Verbunden 1997 Verbundwerkstoffe und Werkstoffverbunde Verbundwerkstoffe und Werkstoffverbunde Kaiserslautern, Germany 1997-09-17 1997-09-19 2016-02-19 OPUS4-12107 Posterpräsentation Kalinka, Gerhard Monitoring the interface crack propagation with micromechanical test devices 2001 Interfacial Phenomena in Composite Materials Interfacial Phenomena in Composite Materials Berlin, Germany 2001-01-28 2001-02-02 2016-02-19 OPUS4-23078 Vortrag Kalinka, Gerhard mechanical properties of the fibre/matrix interface region of composite materials 2010 Eingeladener Vortrag Katholike Universitaet Leuven Eingeladener Vortrag Katholike Universitaet Leuven Leuven, Belgium 2010-07-01 2016-02-19 OPUS4-34456 Vortrag Kalinka, Gerhard Sonderprüfverfahren für Verbundwerkstoffe 2011 Vortragsveranstaltung VDI-AK Kunststofftechnik, BV BB an der TU Berlin Vortragsveranstaltung VDI-AK Kunststofftechnik, BV BB an der TU Berlin Berlin, Deutschland 2011-03-17 2016-02-20 OPUS4-12127 Vortrag Kalinka, Gerhard Untersuchungs des Ermüdungsverhaltens glasfaserverstärkter Thermoplaste mittels Schwingungsmessungen 1990 Zweites Werkstoffsymposium Neue Verbundwerkstoffe Zweites Werkstoffsymposium Neue Verbundwerkstoffe Regensburg, Germany 1990-10-05 1990-10-05 2016-02-19 OPUS4-12004 Zeitschriftenartikel Kalinka, Gerhard; Hinrichsen, G. Two-dimensional computer simulation of spherulite formation by branching lamellae Weinheim Wiley-VCH Verl. 1997 Acta polymerica 48 256 261 2016-02-19 OPUS4-5910 Vortrag Kalinka, Gerhard Charakterisierung des Interface-Versagens in Faserverbundwerkstoffen mit mikromechanischen Testmethoden 1994 5. Berliner Polymeren Tage 5. Berliner Polymeren Tage Potsdam, Germany 1994-10-05 1994-10-07 2016-02-19 OPUS4-12099 Posterpräsentation Kalinka, Gerhard Der Einfluss der Transkristallisation auf die scheinbare Scherfestigkeit von kohlefaserverstärktem Polyphenylensulid (PPS) mit der Einzelfaserauszugsmethode 1995 Verbundwerkstoffe und Werkstoffverbunde Verbundwerkstoffe und Werkstoffverbunde Bayreuth, Germany 1995-10-24 1995-10-25 2016-02-19 OPUS4-11996 Zeitschriftenartikel Kalinka, Gerhard; Boro, I.; Augustin, G.; Hampe, Andreas; Hinrichsen, G. Ermüdungsverhalten von Hochleistungs-Faserverbundwerkstoffen mit thermoplastischer Matrix München Hanser 1990 Kunststoffe / Deutsche Ausgabe 80 5 626 630 2016-02-19 OPUS4-19013 Vortrag Kalinka, Gerhard Bestimmung zeitabhängiger lokaler Eigenschaften von Polymeren mit der Nano-Indentationstechnik 2009 15. Nationales SAMPE Symposium, BAM 15. Nationales SAMPE Symposium, BAM Berlin, Germany 2009-02-18 2009-02-19 2016-02-19 OPUS4-12102 Posterpräsentation Hampe, Andreas An Advanced Indentation Technique for the Characterization of the Fibre-Matrix Interface 1997 Gordon Conference on Composites Gordon Conference on Composites San Buenaventura, CA, USA 1997-01-05 1997-01-09 2016-02-19 OPUS4-12108 Posterpräsentation Kalinka, Gerhard Energy Quantification of Interface Debonding Processes Using 'Stiff' Test Devices 2001 Gordon Conference on Composite Materials Gordon Conference on Composite Materials San Buenaventura, CA, USA 2001-01-28 2001-02-02 2016-02-19 OPUS4-11989 Zeitschriftenartikel Schulz, Eckhard; Kalinka, Gerhard; Meretz, S.; Hampe, Andreas Pull-out of Single Fibres München Hanser 1994 Kunststoffe : bilingual edition, German + English 84 5 25 26 2016-02-19 OPUS4-11994 Zeitschriftenartikel Schulz, Eckhard; Kalinka, Gerhard; Meretz, S.; Hampe, Andreas Einzelfaserauszug - Eine Methode zum Bestimmen der Grenzflächenfestigkeit München Hanser 1994 Kunststoffe / Deutsche Ausgabe 84 5 608 610 2016-02-19 OPUS4-4705 Vortrag Kalinka, Gerhard Bestimmung der Haftfestigkeit in Verbundwerkstoffen mittels Indentations- und Durchdrückexperimenten 2004 DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" DGM Fachausschuss "Gefüge und Eigenschaften von Polymerwerkstoffen" Hamburg, Germany 2004-11-26 2004-11-26 2016-02-19 OPUS4-5922 Vortrag Hampe, Andreas Mechanische Messungen der Bruchzähigkeit des Faser-Matrix-Grenzbereiches in polymeren Verbundwerkstoffen 1996 35. Internationale Chemiefaser-Tagung 35. Internationale Chemiefaser-Tagung Dornbirn, Austria 1996-09-25 1996-09-27 2016-02-19 OPUS4-32036 Vortrag Kalinka, Gerhard Prüfung der Faser-Matrix-Wechselwirkung in Kompositen mittels Einzelfaser push- und pull-out Methoden 2014 4. Wildauer Duromer-Tagung, TH Wildau 4. Wildauer Duromer-Tagung, TH Wildau Wildau, Deutschland 2014-03-03 2016-02-20 OPUS4-32041 Vortrag Kalinka, Gerhard Carbonfaserverstärkte Polymere als Energiespeicher 2014 47. Metallurgisches Seminar "Materialien für die Energieerzeugung, -nutzung und -speicherung" 47. Metallurgisches Seminar "Materialien für die Energieerzeugung, -nutzung und -speicherung" Wernigerode, Deutschland 2014-11-11 2014-11-13 2016-02-20 OPUS4-4032 Vortrag Geburtig, Anja Simulation von Kratzeinwirkungen am Beispiel bewitterter Polymerwerkstoffe 2003 32. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) 32. Jahrestagung der GUS (Gesellschaft für Umweltsimulation) Pfinztal, Germany 2003-03-26 2003-03-28 2016-02-19 OPUS4-12085 Vortrag Hinrichsen, G. Computer simulation of spherulitic formation and crystallization in semicrystalline polymers 1995 Europhysics Conference on Macromolecular Physics Europhysics Conference on Macromolecular Physics Prague, Czech Republic 1995-07-17 1995-07-20 2016-02-19 OPUS4-4704 Posterpräsentation Kalinka, Gerhard Micro indentation near stiff-soft boundaries 2004 "Nanomech5, 5th European Symposium on nano-Mechanical Testing" "Nanomech5, 5th European Symposium on nano-Mechanical Testing" Hückelhoven, Germany 2004-09-07 2004-09-09 2016-02-19 OPUS4-18372 Vortrag Marotzke, Christian Local failure processes in fiber reinforced polymers 2009 International Conference on Composite Materials (ICCM17) International Conference on Composite Materials (ICCM17) Edinburgh, Scotland 2009-07-27 2009-07-31 2016-02-19 OPUS4-12100 Posterpräsentation Kalinka, Gerhard Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test 1997 Micro Mat '97 Micro Mat '97 Berlin, Germany 1997-04-16 1997-04-18 2016-02-19 OPUS4-19016 Vortrag Marotzke, Christian Interface Faser-Matrix - welche Rolle spielt das Interface bei der Festigkeit von Faserverbundwerkstoffen 2009 15. Nationales SAMPE Symposium, BAM 15. Nationales SAMPE Symposium, BAM Berlin, Germany 2009-02-18 2009-02-19 2016-02-19 OPUS4-12128 Vortrag Meretz, S. Kristallisationskinetik bei Faserverbundwerkstoffen 1993 Kolloquium der Bundesanstalt für Materialforschung und -prüfung (BAM) Kolloquium der Bundesanstalt für Materialforschung und -prüfung (BAM) Berlin, Germany 1993-10-01 1993-10-01 2016-02-19 OPUS4-12093 Vortrag Kalinka, Gerhard Energy orientated data interpretation of pull-out and push-out test for the investigation of residual stresses 1999 Interface Phenomena in Composite Materials Interface Phenomena in Composite Materials Berlin, Germany 1999-09-08 1999-09-10 2016-02-19 OPUS4-12103 Posterpräsentation Kalinka, Gerhard Interfacial properties and their determination by using stiffness optimized test devices 1997 Workshop on Micro-Mechanics Measurement Technologies, NIST Workshop on Micro-Mechanics Measurement Technologies, NIST Gaithersburg, MD, USA 1997-05-28 1997-05-30 2016-02-19 OPUS4-11999 Zeitschriftenartikel Kalinka, Gerhard; Boro, I.; Augustin, G.; Hampe, Andreas; Hinrichsen, G. Fatigue Behaviour of High-Performance Fibre-Reinforced Composites with a Thermoplastic Matrix Munich Hanser 1990 Kunststoffe / German plastics 80 5 36 38 2016-02-19 OPUS4-4701 Vortrag Kalinka, Gerhard Mechanische Charakterisierung des Faser-Matrix-Interface mit Einzelfaser-Tests 2004 Werkstoffwoche 2004: Kongress für innovative Werkstoffe, Verfahren und Anwendungen Werkstoffwoche 2004: Kongress für innovative Werkstoffe, Verfahren und Anwendungen Munich, Germany 2004-09-21 2004-09-23 2016-02-19 OPUS4-12098 Posterpräsentation Kalinka, Gerhard Energy Dissipation of the Fibre-Matrix Debonding Process Investigated with the Indentation Technique 1995 Interfacial Phenomena of Composite Materials IPCM'95 Interfacial Phenomena of Composite Materials IPCM'95 Eindhoven, Netherlands 1995-09-11 1995-09-13 2016-02-19 OPUS4-13803 Vortrag Kalinka, Gerhard Untersuchung des Faser-Matrix-Interface in Verbundwerkstoffen mit Einzelfaserversuchen 2006 Technische Universität Clausthal, Institut für Polymerwerkstoffe und Kunststofftechnik - Eingeladener Vortrag Technische Universität Clausthal, Institut für Polymerwerkstoffe und Kunststofftechnik - Eingeladener Vortrag Clausthal-Zellerfeld, Germany 2006-04-26 2016-02-19 OPUS4-4702 Vortrag Kalinka, Gerhard A model of spherulitic crystallization based on growing lameallae 2004 9th Microsymposium of Electron Microscopy in Materials Science 9th Microsymposium of Electron Microscopy in Materials Science Lutherstadt Wittenberg, Germany 2004-05-06 2004-05-07 2016-02-19 OPUS4-7506 Vortrag Kalinka, Gerhard Micro indentation and scratch tests for surface characterisation 2001 XXII. Donauländergespräche über die natürliche und künstliche Alterung von Polymeren XXII. Donauländergespräche über die natürliche und künstliche Alterung von Polymeren Berlin, Germany 2001-09-17 2001-09-18 2016-02-19 OPUS4-32040 Vortrag Kalinka, Gerhard Einzelfaserausdrück und -durchdrückversuche 2014 Wissenschaftskolloquium "Nanotechnologie für Kunststoffverbunde", Haus der Wissenschaft, Veranstalter: Virtuelles Institut Nanotechnologie in Polymer Composites Wissenschaftskolloquium "Nanotechnologie für Kunststoffverbunde", Haus der Wissenschaft, Veranstalter: Virtuelles Institut Nanotechnologie in Polymer Composites Braunschweig, Deutschland 2014-09-30 2016-02-20 OPUS4-12126 Vortrag Boro, I. Zur Wechselstromleitfähigkeit von elektrisch leitfähgen Polymeren 1989 Präsentationsveranstaltung des Berliner Verbandes für Polymerforschung e.V. Präsentationsveranstaltung des Berliner Verbandes für Polymerforschung e.V. Berlin, Germany 1989-03-25 1989-03-25 2016-02-19 OPUS4-12087 Vortrag Hampe, Andreas Energy based characterization of the fibre-matrix interface using the pull-out and push-in test 1997 Interfacial Phenomena in Composite Materials 97 Interfacial Phenomena in Composite Materials 97 Eger, Hungary 1997-03-01 1997-09-03 2016-02-19 OPUS4-12089 Vortrag Kalinka, Gerhard Friction Measurement on fiber reinforced polymer composites with using the indentation technique 1998 European Conference on Composite Materials ECCM-8 European Conference on Composite Materials ECCM-8 Naples, Italy 1998-06-03 1998-06-06 2016-02-19 OPUS4-12095 Posterpräsentation Hampe, Andreas An Advanced Equipment for Single-Fibre Pull-Out test designed to monitor the fracture process 1993 Interfacial Phenomena in Composite Materials Interfacial Phenomena in Composite Materials Cambridge, England 1993-09-13 1993-09-15 2016-02-19 OPUS4-11988 Zeitschriftenartikel Hampe, Andreas; Kalinka, Gerhard; Meretz, S.; Schulz, Eckhard An advanced equipment for single-fibre pull-out test designed to monitor the fracture process Guildford, Surrey Butterworth-Heinemann 1995 Composites 26 1 40 46 2016-02-19 OPUS4-5908 Vortrag Hampe, Andreas The Fracture Process in the Fibre/Matrix Interphase 1994 The Fifth International Conference on Composite Interfaces The Fifth International Conference on Composite Interfaces Gothenburg, Sweden 1994-07-20 1994-07-23 2016-02-19 OPUS4-20121 Posterpräsentation Qian, H. Hierachical composites reinforced with carbon nanotube grafted fibres 2007 MC 8: ADVANCING MATERIALS BY CHEMICAL DESIGN MC 8: ADVANCING MATERIALS BY CHEMICAL DESIGN London, England 2007-05-02 2007-05-05 2016-02-19 OPUS4-12101 Posterpräsentation Kalinka, Gerhard Energy based characterization of the fiber-matrix interface unsing the pull-out and the push-out test 1997 Interfacial Phenomena of Composite Materials IPCM'97 Interfacial Phenomena of Composite Materials IPCM'97 Eger, Hungary 1997-09-01 1997-09-03 2016-02-19 OPUS4-12009 Vortrag Hampe, Andreas The Fracture Process in the Interphase Investigated by the Single Fiber Pull-out Test 1994 Composites Testing and Standardisation ECCM-CTS 2 Composites Testing and Standardisation ECCM-CTS 2 Hamburg, Germany 1994-09-13 1994-09-15 2016-02-19 OPUS4-24452 Vortrag Shirshova, Natasha Modified epoxy resin as electrolytes for structural supercapacitors 2011 European Polymer Congress 2011 European Polymer Congress 2011 Granada, Spain 2011-06-26 2011-07-01 2016-02-19 OPUS4-27466 Vortrag Bismarck, A. Multifunctional Epoxy Resin for Structural Supercapacitors 2012 European Conference on Composite Materials 15 European Conference on Composite Materials 15 Venice, Italy 2012-06-24 2012-06-28 2016-02-20 OPUS4-21415 Vortrag Kalinka, Gerhard Mechanische Eigenschaften des Faser/Matrix Interfaces in Verbundwerkstoffen 2010 ILA 2010-Berlin Airshow, Konferenz: Composites in der Luft- und Raumfahrt ILA 2010-Berlin Airshow, Konferenz: Composites in der Luft- und Raumfahrt Berlin, Germany 2010-06-08 2010-06-13 2016-02-19 OPUS4-12086 Vortrag Kalinka, Gerhard Characterization of the fibre-matrix interface with the indentation technique 1996 6th International Conference on Composite Interfaces (ICCI-VI) 6th International Conference on Composite Interfaces (ICCI-VI) Zichron Ya'akov, Israel 1996-05-05 1996-05-08 2016-02-19 OPUS4-11991 Zeitschriftenartikel Auer, C.; Kalinka, Gerhard; Krause, T.; Hinrichsen, G. Crystallization Kinetics of Pure and Fiber-Reinforced Poly(phenylene Sulfide) Hoboken, NJ Wiley InterScience 1994 Journal of applied polymer science 51 407 413 2016-02-19 OPUS4-11992 Zeitschriftenartikel Krause, T.; Kalinka, Gerhard; Auer, C.; Hinrichsen, G. Computer Simulation of Crystallization Kinetics in FIber-Reinforced Composites Hoboken, NJ Wiley InterScience 1994 Journal of applied polymer science 51 399 406 2016-02-19 OPUS4-5929 Vortrag Hampe, Andreas Measurement of the Interfacial Toughness in Composites by Micromechanical Experiments 1997 4th Arab International Conference on Polymer Science & Technology 4th Arab International Conference on Polymer Science & Technology Cairo, Egypt 1997-09-08 1997-09-11 2016-02-19 OPUS4-32038 Vortrag Kalinka, Gerhard Was war die Schadensursache - was der Folgeschaden? 2014 polymertec 14 gemeinsam mit 14. Problemseminar "Deformation und Bruchverhalten von Kunststoffen", Hochschule Merseburg polymertec 14 gemeinsam mit 14. Problemseminar "Deformation und Bruchverhalten von Kunststoffen", Hochschule Merseburg Merseburg, Deutschland 2014-06-25 2014-06-27 2016-02-20 OPUS4-24272 Vortrag Kalinka, Gerhard Hierarchical Composites with Carbon Nanotube Grafted Fibres 2011 ECCM 13, 13th European Conference on Composite Materials ECCM 13, 13th European Conference on Composite Materials Stockholm, Sweden 2011-06-02 2011-06-05 2016-02-19 OPUS4-12006 Vortrag Hinrichsen, G. The Fiber/Matrix Interphase: New Insights into an old Problem 1998 INTERNATIONAL CONFERENCES ON POLYMER CHARACTERIZATION POLYCHAR-6 INTERNATIONAL CONFERENCES ON POLYMER CHARACTERIZATION POLYCHAR-6 Denton, TX, USA 1998-01-07 1998-01-09 2016-02-19 OPUS4-4700 Vortrag Kalinka, Gerhard Mikromechanische Testmethoden zur Bestimmung von Haftung und Reibung in Faserverbundwerkstoffen 2004 Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR), Institut für Strukturmechanik Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR), Institut für Strukturmechanik Braunschweig, Germany 2004-02-04 2004-02-04 2016-02-19 OPUS4-5940 Vortrag Hampe, Andreas The Single Fibre Pull-Out Test Performed with a Microcomposite Sample 1998 The Seventh International Conference on Composite Interfaces - ICCI-VII The Seventh International Conference on Composite Interfaces - ICCI-VII Fujisawa, Kanagawa, Japan 1998-05-10 1998-05-13 2016-02-19 OPUS4-32037 Vortrag Kalinka, Gerhard Mechanical characterization of the fiber-matrix interface in brittle and ductile polymers by using pull-out and push-out tests 2014 COMPO2014 Nanocomposites&Biocomposites, Weizmann Institute of Science COMPO2014 Nanocomposites&Biocomposites, Weizmann Institute of Science Rehovot, Israel 2014-04-28 2014-05-01 2016-02-20 OPUS4-12084 Vortrag Schulz, Eckhard Effect of Transcrystallization in Carbon Fibre Reinforced Poly(p-phenylene sulfide) Composites on the Interfacial Shear Strength Investigated with the Single Fibre Pull-out Test 1995 Europhysics Conference on Macromolecular Physics Europhysics Conference on Macromolecular Physics Prague, Czech Republic 1995-07-17 1995-07-20 2016-02-19 OPUS4-12003 Zeitschriftenartikel Hinrichs, V.; Leistner, A.; Kalinka, Gerhard; Schulz, Eckhard; Hinrichsen, G. Viscoelastic properties of the interphase in fibre reinforced polymers - measurement and simulation New York, NY North-Holland International Conference on Composite Interfaces 1999 Composite interfaces : proceedings 6 2 93 101 2016-02-19 OPUS4-13239 Vortrag Marotzke, Christian Microscopical failure processes in fiber reinforced polymers - Mechanical aspects of the adhesion between fiber and matrix 2006 11th International Conference on Mechanics and Technology of Composite Materials 11th International Conference on Mechanics and Technology of Composite Materials Sofia, Bulgaria 2006-10-02 2006-10-04 2016-02-19 OPUS4-12106 Posterpräsentation Kalinka, Gerhard Testing the fibre-matrix adhesion in fiber reinforced polymers using the single fibre push-out method 1999 8th European Conference on Applications of Surface and Interface Analysis (ECASIA 99) 8th European Conference on Applications of Surface and Interface Analysis (ECASIA 99) Seville, Spain 1999-10-04 1999-10-08 2016-02-19 OPUS4-12091 Vortrag Habel, Wolfgang Evaluation of the Adhesion Behaviour of Optical Fibers for Sensors Embedded in Cementitiuos Materials 1998 International Workshop on Fiber Optic Sensors for Construction Materials and Bridges International Workshop on Fiber Optic Sensors for Construction Materials and Bridges Newark, NJ, USA 1998-05-03 1998-05-05 2016-02-19 OPUS4-18258 Zeitschriftenartikel Juntaro, J.; Pommet, M.; Kalinka, Gerhard; Mantalaris, A.; Shaffer, M.S.P.; Bismarck, A. Creating Hierarchical Structures in Renewable Composites by Attaching Bacterial Cellulose onto Sisal Fibers Weinheim Wiley-VCH Verl. 2008 Advanced materials 20 16 3122 3126 10.1002/adma.200703176 2016-02-19 OPUS4-6451 Vortrag Schulz, Eckhard Investigation on mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy 1998 18th Disc. Conf. and 56th PMM 18th Disc. Conf. and 56th PMM Prague, Czech Republic 1998-07-20 1998-07-23 2016-02-19 OPUS4-12105 Posterpräsentation Kalinka, Gerhard Influence of water on the fibre-matrix adhesion investigated by the single fiber indentation method 1998 4th European Conference on Adhesion, 1st World Congress on Adhesion an Related Phenomena 4th European Conference on Adhesion, 1st World Congress on Adhesion an Related Phenomena Garmisch-Partenkirchen, Germany 1998-09-06 1998-09-11 2016-02-19 OPUS4-5928 Vortrag Hampe, Andreas Comparison of the Interfacial Toughness Measured by the Single Fibre Pull-Out, the Indentation and the Fragmentation Test 1997 NIST, Workshop on Micro-Mechanics Measurement Technologies for Fiber-Polymer Interfaces NIST, Workshop on Micro-Mechanics Measurement Technologies for Fiber-Polymer Interfaces Gaithersburg, MD, USA 1997-05-28 1997-05-30 2016-02-19 OPUS4-12213 Vortrag Kalinka, Gerhard Comparison of Interfacial Properties obtained by using Single Filament Embedded Tensile Test and Push-in Test 1997 Recent Advancement of Interfacial Materials Science on Composite Materials '97 Recent Advancement of Interfacial Materials Science on Composite Materials '97 Kyoto, Japan 1997-05-07 1997-05-09 2016-02-19 OPUS4-6439 Vortrag Schulz, Eckhard Investigation of polymeric composites reinforced with high oriented short glass fibres using the single fibre push-out test 1997 Euro-Conf. Surfaces and Interfaces in Polymers and Composites Euro-Conf. Surfaces and Interfaces in Polymers and Composites Lausanne, Switzerland 1997-06-03 1997-06-06 2016-02-19 OPUS4-34454 Vortrag Blaker, Jonny CARBON FIBRES WITH MODULATED PROPERTIES AND SHAPE ALONG THE FIBRE LENGTH 2015 20th International Conference on Composite Materials - ICCM 20 20th International Conference on Composite Materials - ICCM 20 Copenhagen, Denmark 2015-07-19 2015-07-24 2016-02-20 OPUS4-27467 Vortrag Wienrich, Malte IMPACT OF IONIC LIQUID ON THE MECHANICAL PERFORMANCE OF MATRIX POLYMER FOR FIBRE REINFORCED MATERIALS FOR ENERGY STORAGE 2012 ECCM 15 - European Conference on Composite Materials ECCM 15 - European Conference on Composite Materials Venice, Italy 2012-06-24 2012-06-24 2016-02-20 OPUS4-12092 Vortrag Schulz, Eckhard Investigations of the mechanical behaviour of heterogeneous polymeric systems and fibre reinforced composites using micro indentation and scanning force microscopy 1998 Special Lectures, 18. Disc. Conf. And 56the PMM.: Mech. Behaviour of polymeric materials Special Lectures, 18. Disc. Conf. And 56the PMM.: Mech. Behaviour of polymeric materials Prague, Czech Republic 1998-07-20 1998-07-23 2016-02-19 OPUS4-24450 Posterpräsentation Houllé, Matthieu CNT-MODIFIED FABRICS FOR THE MANUFACTURING OF MULTI-FUNCTIONAL LAYERED COMPOSITES 2011 CESEP'11 4th International Conference on Carbons for Energy Storage/Conversion and Environment Protection CESEP'11 4th International Conference on Carbons for Energy Storage/Conversion and Environment Protection Vichy, France 2011-09-25 2011-09-29 2016-02-19 OPUS4-10894 Beitrag zu einem Sammelband Munz, Martin; Chung, Jae Un; Kalinka, Gerhard Possart, W. Mapping Epoxy Interphases Weinheim Wiley-VCH DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie 2005 Adhesion : current research and applications 7 3-527-31263-3 7th European Conference on Adhesion ; 7th EURADH Freiberg, Germany 2004-09-01 103 123 2016-02-19 OPUS4-14027 Beitrag zu einem Tagungsband Marotzke, Christian; Kalinka, Gerhard Zachariev, G. Microscopical Failure Processes in Fiber Reinforced Polymers - Mechanical Aspects of the Adhesion between Fiber and Matrix Sofia Bulgarian Academy of Sciences 2006 Proceedings of the 11th International Conference on Mechanics and Technology of Composite Materials 11th International Conference on Mechanics and Technology of Composite Materials Sofia, Bulgaria 2006-10-02 2006-10-04 37 42 2016-02-19 OPUS4-48026 Vortrag Rabe, Torsten Deformation behavior of alumina and zirconia springs at room temperature At high temperatures and in harsh environments ceramic springs are often superior to metallic springs and allow for innovative solutions. A recently proposed application involves ceramic springs with metallized surfaces as capacitive force sensor. A strictly linear stress-strain characteristic of the spring is a precondition for such a sensor. Helical ceramic springs with rectangular cross-section have been produced from sintered hollow cylinders. Alumina, ATZ, Y-TZP, and Ce-TZP springs with identical dimensions were characterized and compared regarding deformation behavior. Spring deformation was investigated under various load scenarios. Dynamic compression was performed with deformation speeds from 0.3 to 30 mm/min. Spring constants of alumina springs are strain rate independent. By contrast, Y-TZP spring constant increases by approximately 3 % within the experimental framework. A high-precision test facility was developed to characterize spring displacement in nm range under static tensile load over long periods of time. Spring elongation with asymptotic course was observed for zirconia containing materials at room temperature. This effect is particularly strong in the case of Y-TZP. Up to 0.3 % time-dependent elongation was measured after 24 h under constant load. Deformation is completely reversible after unloading. Alumina springs do not show any time-dependent deformation under identical test conditions. Contrary to alumina springs, a non-linear stress-strain behavior of TZP springs at room temperature was proved in both test series. It is supposed, that pseudo-elasticity caused by stress-induced phase transformation from tetragonal to monoclinic is responsible for this special behavior of TZP springs. 2019 D-A-CH Keramiktagung Leoben, Austria 06.05.2019 09.05.2019 2019-05-22 OPUS4-7137 Vortrag Munz, Martin On the stiffness gradient at the interface between an amine-cured epoxy and a thermoplast 2005 6. Workshop 'Rasterkraftmikroskopie in der Werkstoffwissenschaft' an der Uni Erlangen, Inst. für Werkstoffwissenschaften veranstaltet vom Arbeitskreis 'Rastersondenmikroskopie in der Werkstoffwissenschaft' im Fachausschuss Metallographie der Deutschen Gesellschaft für Materialkunde (DGM) 6. Workshop 'Rasterkraftmikroskopie in der Werkstoffwissenschaft' an der Uni Erlangen, Inst. für Werkstoffwissenschaften veranstaltet vom Arbeitskreis 'Rastersondenmikroskopie in der Werkstoffwissenschaft' im Fachausschuss Metallographie der Deutschen Gesellschaft für Materialkunde (DGM) Erlangen, Germany 2005-02-17 2005-02-18 2016-02-19 OPUS4-50844 Zeitschriftenartikel Lüders, C.; Kalinka, Gerhard; Li, Wei; Sinapius, M.; Wille, T. Experimental and numerical multiscale approach to thermally cycled FRP Due to the different thermal expansion of the constituent materials, cyclic thermal loading of FRP induces alternating stresses in the material at two scales: at the micro scale (level of fibre-matrix-interaction) and at the macro scale (level of the multidirectional laminate). Especially the micro scale effect is not comprehensively investigated yet. Additionally, computational investigations mostly neglect this effect due to the homogenous modelling of the composite material. As this effect is assumed to significantly contribute to the fatigue of FRP at thermal loads, the present paper suggests an experimental and numerical multiscale approach including Experiments at the different involved material scales to separately observe the effects acting at these scales. The approach also includes numerical modelling for each scale to complement the knowledge gained from the Experiments and to create a basis for the consideration of the micro effect even in macroscopic fatigue models treating homogeneous modelled composites. The main focus of the contribution is to bring the overall Approach up for discussion, rather than to present the multiscale modelling details. Niederlande Elsevier Ltd. 2020 Composite Structures 244 112303 10.1016/j.compstruct.2020.112303 2020-06-08 OPUS4-21295 Beitrag zu einem Tagungsband Marotzke, Christian; Kalinka, Gerhard Local failure processes in fiber reinforced polymers The breakage of a fiber and its effect on the strain energy is studied in a model composite, this is, a single fiber embedded in a dogbone specimen. The fracture process is recorded by an acoustic emission device, the crack patterns are monitored under a microscope. A finite element analysis is performed in order to estimate the energy released by different failure scenarios. The abilities and limitations of the acoustic emission analysis in characterizing different failure types in fiber reinforced composites are evaluated. Edinburgh, UK The British Composites Society 2009 ICCM17 - 17th International conference on composite materials (Proceedings) ICCM17 - 17th International conference on composite materials Edinburgh, UK 2009-07-27 2009-07-31 D7:8 1 10 2016-02-19