Dokument-ID Dokumenttyp Autoren/innen Persönliche Herausgeber/innen Haupttitel Abstract Auflage Verlagsort Verlag Herausgeber (Institution) Erscheinungsjahr Titel des übergeordneten Werkes Jahrgang/Band ISBN Veranstaltung Veranstaltungsort Beginndatum der Veranstaltung Enddatum der Veranstaltung Ausgabe/Heft Erste Seite Letzte Seite URN DOI Lizenz Datum der Freischaltung OPUS4-29396 Zeitschriftenartikel Vöse, Markus; Otto, F.; Fedelich, Bernard; Eggeler, G. Micromechanical investigations and modelling of a copper-antimony-alloy under creep conditions In many practical applications, creep damage is the limiting factor of a component’s lifetime. A micromechanical model of creep induced grain boundary damage is proposed, which allows for the simulation of creep damage in a polycrystal within the framework of finite element analysis. The model considers grain boundary cavitation and sliding according to a micromechanically motivated cohesive zone model while creep deformation of the grains is described following the slip system theory. The model can be applied to idealised polycrystalline structures, such as a Voronoi tessellation or, like demonstrated here, to real grain structures of miniature creep specimens. Creep tests with pure Cu single crystals and with a coarse-grained polycrystalline Cu-1 wt.% Sb alloy at 823 K have been performed and used to calibrate the polycrystal model. The grain structure of the polycrystalline Cu–Sb specimens has been revealed by the EBSD method. Extensive grain boundary sliding and cavitation has been observed in the crept specimens. Grain boundary sliding has been found to promote wedge-type damage at grain boundary triple junctions and to contribute significantly to the total creep strain. Furthermore, the assumed stress sensitivity of the models grain boundary cavity nucleation rate strongly influences the development of wedge-type damage. Amsterdam Elsevier Ltd. 2014 Mechanics of materials 69 1 41 62 10.1016/j.mechmat.2013.09.013 2016-02-20 OPUS4-25630 Zeitschriftenartikel Vöse, Markus; Fedelich, Bernard; Owen, J. A simplified model for creep induced grain boundary cavitation validated by multiple cavity growth simulations Simulations of cavitation processes on a grain boundary under creep conditions have been carried out, taking into account nucleation, growth, coalescence and sintering of multiple cavities. Cavity growth rates have been calculated through a resolution procedure based on the use of holomorphic complex functions. Three dimensionless parameters have been identified that are responsible for the cavitation development. Parameter studies have been carried out in order to characterise the mechanisms that are responsible for the cavitation development. These studies have been used to develop a physically motivated, simplified model in order to describe the cavitation development of the simulations in terms of global state variables. The simplified model is able to reproduce the cavitation development for all considered combinations of the dimensionless parameters and allows the description of the thickening behaviour of a cavitating grain boundary. Amsterdam Elsevier 2012 Computational materials science 58 201 213 10.1016/j.commatsci.2012.01.033 2016-02-19