Dokument-ID Dokumenttyp Autoren/innen Persönliche Herausgeber/innen Haupttitel Abstract Auflage Verlagsort Verlag Herausgeber (Institution) Erscheinungsjahr Titel des übergeordneten Werkes Jahrgang/Band ISBN Veranstaltung Veranstaltungsort Beginndatum der Veranstaltung Enddatum der Veranstaltung Ausgabe/Heft Erste Seite Letzte Seite URN DOI Lizenz Datum der Freischaltung OPUS4-29396 Zeitschriftenartikel Vöse, Markus; Otto, F.; Fedelich, Bernard; Eggeler, G. Micromechanical investigations and modelling of a copper-antimony-alloy under creep conditions In many practical applications, creep damage is the limiting factor of a component’s lifetime. A micromechanical model of creep induced grain boundary damage is proposed, which allows for the simulation of creep damage in a polycrystal within the framework of finite element analysis. The model considers grain boundary cavitation and sliding according to a micromechanically motivated cohesive zone model while creep deformation of the grains is described following the slip system theory. The model can be applied to idealised polycrystalline structures, such as a Voronoi tessellation or, like demonstrated here, to real grain structures of miniature creep specimens. Creep tests with pure Cu single crystals and with a coarse-grained polycrystalline Cu-1 wt.% Sb alloy at 823 K have been performed and used to calibrate the polycrystal model. The grain structure of the polycrystalline Cu–Sb specimens has been revealed by the EBSD method. Extensive grain boundary sliding and cavitation has been observed in the crept specimens. Grain boundary sliding has been found to promote wedge-type damage at grain boundary triple junctions and to contribute significantly to the total creep strain. Furthermore, the assumed stress sensitivity of the models grain boundary cavity nucleation rate strongly influences the development of wedge-type damage. Amsterdam Elsevier Ltd. 2014 Mechanics of materials 69 1 41 62 10.1016/j.mechmat.2013.09.013 2016-02-20 OPUS4-30991 Zeitschriftenartikel Vöse, Markus; Fedelich, Bernard; Otto, F.; Eggeler, G. Micromechanical modeling of creep damage in a copper-antimony alloy A micromechanical model of creep induced grain boundary damage is proposed, which allows for the simulation of creep damage in a polycrystal with the finite element method. Grain boundary cavitation and sliding are considered via a micromechanically motivated cohesive zone model, while the grains creep following the slip system theory. The model has been calibrated with creep test data from pure Cu single crystals and a coarse-grained polycrystalline Cu-Sb alloy. The test data includes porosity measurements and estimates of grain boundary sliding. Finally, the model has been applied to Voronoi models of polycrystalline structures. In particular the influence of grain boundary sliding on the overall creep rate is demonstrated. Red Hook, NY, USA Curran 2014 Procedia materials science 3 ECF20 - 20th European conference on fracture Trondheim, Norway 28.06.2014 04.07.2014 21 26 urn:nbn:de:kobv:b43-309914 10.1016/j.mspro.2014.06.006 http://creativecommons.org/licenses/by-nc-nd/3.0/de/deed.de 2016-02-20