TY - CONF A1 - Pelkner, Matthias A1 - Ehlers, Henrik A1 - Thewes, R. T1 - Online Eddy Current Testing of PBF LB/M Parts Using GMR Sensor Arrays During Manufacturing N2 - In recent years, additive manufacturing technologies have gained in importance. Laser powder bed fusion can be used for complex functional components or the production of workpieces in small quantities. High safety requirements, e.g. in aerospace, demand comprehensive quality control. Therefore, non-destructive offline inspection methods such as computed tomography are used after production. Recently, online non-destructive testing methods such as optical tomography have been developed to improve profitability and practicality. In this presentation, the applicability of eddy current inspection using GMR sensors for online inspection of PBF-LB/M parts is demonstrated. Eddy current testing is performed for each layer during the production process at frequencies uo to 1.2 MHz. Despite the use of high-resolution arrays with 128 elements, the testing time is kept low by an adapted hardware. Thus, the measurement can be performed during the manufacturing process without significantly slowing down the production process. In addition to the approach, the results of an online eddy current test of a step-shaped test specimen made of Haynes282 are presented. T2 - European Conference on Non-Destructive Testing (ECNDT) 2023 CY - Lisbon, Potugal DA - 03.07.2023 KW - Eddy current KW - GMR KW - Additive manufacturing KW - In-situ monitoring KW - NDT PY - 2023 AN - OPUS4-58082 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -