TY - CONF A1 - Luong, Thi Mai Hoa A1 - Zabel, V. A1 - Lorenz, W. A1 - Rohrmann, Rolf G. T1 - Vibration-based Model Updating and Identification of Multiple Axial Forces in Truss Structures N2 - Safety assessment of existing iron and steel truss structures requires the determination of the axial forces and corresponding stresses in truss structural members. The results of the axial force determination can be integrated as part of a structural health monitoring scheme for existing trusses. In this work, a methodology is proposed to identify multiple axial forces in members of a truss structure based on the modal parameters. Vibration test allows the identification of the natural frequencies and mode shapes, globally of the truss structure as well as locally of the individual bars. The method calibrates the numerical model of the truss structure using a genetic algorithm and strategic validation criteria. The validation criteria are based on the identified natural frequencies and global mode shapes of the truss structure as well as information of the axial forces in the individual bars of the truss, which are estimated from the natural frequencies and five amplitudes of the corresponding local mode shapes of the single bars based on an analytical-based algorithm. The calibration allows the identification of the axial forces in all bars of the truss structure. For mode pairing strategy, a technique makes use of the enhanced modal assurance criteria with the calculation of the modal strain energies. Moreover, the modal strain energies are also used to select the relevant local mode shape of the individual bars. The feasibility and accuracy of the proposed methodology is verified by laboratory experiments on several truss structures. In situ tests on existing trusses are intended. The results from one of the laboratory tested structures, i.e. a two-bar system, are presented. T2 - 6th Asia Pacific Workshop on Structural Health Monitoring (6th APWSHM) CY - Hobart, Australia DA - 07.12.2016 KW - Optimization technique KW - Truss structures KW - Axial force KW - Dynamic test KW - Model updating PY - 2016 AN - OPUS4-38805 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -