TY - GEN A1 - Mühler, T. T1 - Generation of ceramic green bodies in the additive manufacturing by Laser Induced Slip-casting (LIS) N2 - For the additive manufacture of large components usually powder-based methods are used. A powder is deposited layer wise by a recoater, then, the component structure is printed to the powder bed or sintered by a laser. In slurry based methods, the slurry is deposited by a doctor blade and dried before the printing of binder or the laser treatment. The new method of laser-induced slip casting is also a slurry-based method and the layers deposited sequential. However the slip is not dried and the structure is written directly by a laser into the suspension. The wall thickness of the ceramic material can be adjusted by the laser spot size and treatment time. The water is evaporated by the laser and a green body is formed locally. Because of its porosity, water is taken from the surrounding suspension and the wall thickness of the green body increases with treatment time. Due to the use of highly filled suspensions, the green body is stable in the ceramic slurry. Large green bodies can be built which have no visible layers in the microstructure. T2 - 40th International Conference and Expo on Advanced Ceramics and Composites CY - Daytona Beach, FL, USA DA - 24.01.2016 KW - additive manufacturing PY - 2016 UR - https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/38048 AN - OPUS4-38048 AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany