TY - JOUR A1 - Hesse, J. A1 - Naghib-zadeh, H. A1 - Rabe, Torsten A1 - Töpfer, J. T1 - Integration of additive-free Ni–Cu–Zn ferrite layers into LTCC multilayer modules T2 - Journal of the European Ceramic Society N2 - The sintering behavior of sub-micron Ni0.30Cu0.20Zn0.52Fe1.98O3.99 ferrite with and without Bi2O3 addition was studied. Ferrites with 0.5 wt% Bi2O3 exhibit enhanced shrinkage at T < 900 °C with significant grain growth. Additive-free ferrite powders also sinter to high density at 900 °C, however, grain growth is very limited. Both ferrites exhibit a permeability of µ = 400–450. Multilayers consisting of ferrite and low-k dielectric LTCC layers were prepared by co-firing at 900–915 °C. The shrinkage and thermal expansion characteristics of ferrite and LTCC tapes are similar. However, the permeability of integrated ferrite layers, made from ferrite tapes with Bi2O3 additive, significantly drops after co-firing with LTCC layers compared to separately fired monolithic ferrite multilayers. Contrarily, the permeability of integrated, Bi2O3-free ferrite layers, co-fired with dielectric tapes, is identical to that of monolithic ferrite multilayers. This finding is an important step toward ferrite integration into complex LTCC multilayer architectures. PB - Elsevier Ltd. CY - Oxford, UK KW - LTCC KW - Ferrite integration KW - Multilayer KW - Sintering PY - 2016 UR - https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/36001 AN - OPUS4-36001 SN - 0955-2219 VL - 36 IS - 8 SP - 1931 EP - 1937 AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany