TY - JOUR A1 - Müller, Werner T1 - Alterung von Bewehrungsgittern aus Polyester T2 - Bautechnik N2 - Durch die hydrolytische Alterung ändert sich die Zugfestigkeit eines Polyester-Bewehrungsgitters im Laufe der Zeit. Nach den Empfehlungen für den Entwurf und die Berechnung von Erdkörpern mit Bewehrung aus Geokunststoffen (EBGEO) der DGGT wird dieser Effekt durch einen Abminderungsfaktor bei der Bemessung berücksichtigt. Es ist zwar im Prinzip festgelegt, wie man bei der Bestimmung eines solchen Faktors für eine chemisch bedingte Materialveränderung vorgehen soll (ISO/TR 20432), es bleiben jedoch große Freiheiten bei der Umsetzung. Die Fragen, die sich daraus bei Bewehrungsgittern aus Polyester ergeben, werden diskutiert. Es werden Bausteine eines einheitlichen Verfahrens vorgeschlagen, das sich nicht nur auf den Festigkeitsverlust, sondern auch auf die molekulare Veränderung konzentriert. N2 - Due to hydrolytic aging of the polyester material the tensile strength of PET-geogrids will change with time. According to the design recommendations (EBGEO) of the German Geotechnical Society DGGT this effect has to be taken into account by a factor of reduction. In principle the determination of the factor for chemical degradation is described in ISO/TR 20432. However, there is a considerable discretionary leeway in realizing the procedure for a special type of product. The questions, which occur from this for PET-geogrids, will be discussed in detail. Against this background building stones of a well-defined procedure are suggested, which considers not only mechanical degradation but also degradation in molecular weight. PB - Ernst & Sohn CY - Berlin KW - Bewehrungsgitter KW - Lebensdauer KW - Polyester KW - Deponietechnik KW - Geogitter KW - Hydrolyse KW - Abminderungsfaktor KW - Alterung KW - Geogrids KW - Hydrolysis KW - Factor of reduction KW - Aging PY - 2013 UR - https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/28727 AN - OPUS4-28727 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 VL - 90 IS - 6 SP - 359 EP - 366 AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany