TY - JOUR A1 - Levkovitch, Vladislav A1 - Sievert, Rainer A1 - Svendsen, B. T1 - Simulation of Fatigue Crack Propagation in Ductile Metals by Blunting and Re-Sharpening JF - International journal of fracture N2 - Laird and Smith [(1962). Philosophical Magazine 8, 847–857] proposed a plastic sliding-off mechanism for the stage II fatigue crack growth via striation formation. In their view, the fatigue crack extension results solely from the changing character of deformation at the crack tip during loading and unloading. In particular, the crack tip blunts during the loading stage and folds into a double notch during the unloading stage, resulting in striation formation. In order to verify Laird’s plastic blunting mechanism for ductile polycrystals as well as for ductile fcc single crystals, FE calculations were performed for a rectangular plate with an initially sharp crack under plane strain conditions. The plate was subjected to a fully reversed tension-to-pressure cyclic load perpendicular to the crack plane (Mode 1). In the single crystal case the crack propagation simulations were carried out for cracks with crack plane (001) for two different crack growth orientations [110] and [100]. No initial radius for the crack tip was assumed. The actual shape of the crack tip followed from an initially sharp crack by repeated remeshing. To model the constitutive behavior typical for polycrystalline ductile metals, J2 hypo-elasto-plasticity model with Armstrong–Frederick kinematic hardening was used. To model the constitutive behavior typical for ductile fcc single crystals, a geometrically nonlinear version of Cailletaud’s model based on the multiplicative elasto-plastic decomposition of the deformation gradient was implemented into the FE program ABAQUS. For simplicity, only octahedral slip systems were considered. Using repeated remeshing for severely distorted elements at the advancing crack tip, deformation patterns in the sense of Laird’s mechanism for fatigue crack propagation with striation formation were obtained in the case of the polycrystal simulation as well as in the case of the single crystal simulation for [110] crack growth direction. The simulation for [100] crack growth direction with the same stress level as for [110] direction also yielded crack extension by progressive large deformations but without striation formation. The dependence of the fatigue striation formation on the crack growth direction as predicted by the simulation of crack propagation in single crystals is verified by the experimental results of Neumann [(1974). Acta Metallurgica 22, 1155–1165] on pure copper single crystals. KW - Fatigue KW - Crack Propagation KW - Viscoplastic Constitutive Model KW - Finite-Element-Simulation KW - Fatigue KW - FE modeling KW - Laird KW - Plastic blunting and re-sharpening KW - Remeshing KW - Single crystal KW - Striations PY - 2005 SN - 0376-9429 SN - 1573-2673 VL - 136 IS - 1-4 SP - 207 EP - 220 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-10631 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -