TY - JOUR A1 - Wäsche, Rolf A1 - Paulick, Carl A1 - Steinborn, Gabriele A1 - Richter, V. A1 - Werner, M. T1 - Joining of ceramic components in the green state via LPIM T2 - Advanced materials research N2 - It has been successfully demonstrated that ceramic materials can be joined in the green state without a second phase by using low pressure injection molded parts. The investigation of the joining interface revealed that a high quality interface can be achieved by carefully adjusting the different manufacturing steps. The use of monomodal particle size distribution in the used powder CT3000SG is inferior to a broader particle size distribution obtained by replacing 33% of the finer alumina powder by coarser CT1200SG. In this way the dewaxing process is significantly improved when the wall thickness of the part exceeds 3 mm. The investigation of the mechanical properties of the joined and sintered parts revealed, that the bending strength of the joined specimens achieved about 80 % of the unjoined, monolithic specimens. PB - Trans Tech Publ. CY - Zurich T2 - 4th International Conference on Advanced Materials and Processing CY - Hamilton, New Zealand DA - 2006-12-10 KW - Joining KW - Ceramics KW - Green state KW - Interface KW - Bending strength KW - Low pressure injection molding PY - 2005 UR - https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/19001 AN - OPUS4-19001 UR - http://www.scientific.net/3-908453-89-5/207/ SN - 1022-6680 SN - 1662-8985 VL - 29-30 SP - 207 EP - 210 AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany