TY - CONF A1 - Erhard, Anton A1 - Otremba, Frank T1 - Nondestructive testing and fracture mechanics T2 - 5th International CANDU In-Service inspection workshop and NDT in Canada 2014 conference N2 - Nondestructive Testing (NDT) and fracture mechanics are two different disciplines in applied engineering science. Both areas are very important for the evaluation of the component integrity. Unfortunately the technical understanding in both disciplines is not identically, what lead to misunderstandings. In the present paper, the basic ideas about fracture mechanics and the input parameters coming from the NDT side are explained, concerning the integrity evaluation of the components. The widely used NDT methods are magnetic particle, dye penetrant, electrical eddy currents, radiography and ultrasonics. But not all of these common NDT methods can deliver parameters satisfy the fracture mechanics requirements. The first two can detect only surface-breaking or immediately sub-surface defects. Eddy current can also find defects in deeper sub-surface layers, while radiography and ultrasonics can also find embedded, remote defects. These three methods have furthermore a high potential for defect sizing and are therefore predestined to provide fracture mechanics input parameters. At the example of steam generator tube inspection the interplay of eddy current and fracture mechanics as related to tube integrity will be explained. T2 - 5th International CANDU In-Service inspection workshop and NDT in Canada 2014 conference CY - Toronto, Ontario, Canada DA - 16.06.2014 KW - Eddy current KW - Steam generator tube inspection KW - Component integrity KW - Fracture mechanics PY - 2014 SP - 1 EP - 12 AN - OPUS4-30907 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -