TY - JOUR A1 - Ferrero, Fabio A1 - Zeps, Robert A1 - Kluge, Martin A1 - Schröder, Volkmar A1 - Spoormaker, T. T1 - Analysis of the self-heating process of tetrafluoroethylene in a 100-dm³-reactor JF - Journal of loss prevention in the process industries N2 - There is a lack of data on the self-ignition behaviour of tetrafluoroethylene in industrial sized equipment. Therefore, a facility was designed and constructed for the determination of the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene in a cylindrical reactor with a volume of 100 dm3. Tests with initial pressures of 5 and 10 bar(a) were performed. The Minimum Ignition Temperature of Decomposition of tetrafluoroethylene was observed to decrease with the initial pressure, in agreement with previous experiments with small scale cylindrical vessels. This paper describes the test set-up und gives an overview of the achieved experimental results. In particular the effect of the reactor orientation (vertical or horizontal) is discussed. Furthermore, simplified equations from the Semenov thermal explosion theory are used to attempt extrapolations of previous and current data on the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene to other vessel volumes or initial pressures. Moreover, the experimental data are plotted together against the heated volume to heated surface ratio, which should provide a better extrapolation to other vessel dimensions by taking into account that the efficiency of the dispersion of the heat generated by the reaction is different for two reactors with the same volume but different diameter. Finally, simplified methods for predicting the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene presented previously by the authors are validated for large scale reactors with the experimental data collected within the current work. KW - Tetrafluoroethylene KW - Decomposition KW - Self-ignition KW - Large-scale reactor PY - 2012 DO - https://doi.org/10.1016/j.jlp.2012.06.001 SN - 0950-4230 SN - 1873-3352 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 25 IS - 6 SP - 1010 EP - 1017 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-26786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -