TY - CONF A1 - Pavlovic, Mato A1 - Ronneteg, U. A1 - Müller, Christina A1 - Ewert, Uwe A1 - Boller, C. T1 - Safe product design - the role of the NDE reliability analysis T2 - 18th WCNDT - World conference on nondestructive testing (Proceedings) N2 - When pushed to the limits of their detection capability, NDE systems do not produce consistent hit/miss indications. Their capability of detecting small defects is therefore expressed in terms of POD. An adequate NDE system is required to ensure the structural integrity. In conventional signal response analysis, the POD is expressed as a function of the defect size, and its adequacy for the inspection task is tested against the maximum allowable defect size which will not undermine the structural integrity. Analyses of modern structures show that other parameters, beside the defect size, can both significantly influence the POD and determine the severity of the defect for the structure. Within the multi-parameter reliability analysis, the POD is expressed as a function of those influencing parameters. When determining the adequacy of the NDE system, the capability of detecting a defect has to be expressed and tested against the critical value of exactly that parameter that determines defects severity for the structure. Failing to do so can lead to a rejection of the healthy, or acceptance of the bad part. The principle is demonstrated on the example of the Transmit-Receive Longitudinal (TRL) ultrasonic inspection of the iron cast component for semi-elliptical surface defects. T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 2012-04-16 KW - Reliability KW - Probability of detection (POD) KW - Multi-parameter KW - Ultrasonics KW - Transmit receive longitudinal (TRL) PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 9 (Paper 310) AN - OPUS4-27581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -