TY - CONF A1 - Spitzer, Stefan T1 - Influence of the pressure difference on the safety characteristics of dusts and potential ignition sources for hybrid mixtures N2 - In the standards for the determination of safety characteristics of dusts an initial pressure difference of 400 mbar (all: abs) is applied, that increases to 1013 mbar to achieve a homogeneous dust-air mixture. Since the measuring equipment accuracy is given with ± 0,1 bar the initial pressure could range somewhere between 300 and 500 mbar and the pressure increase between 500 and 700 mbar, leading to a testing pressure of 800 to 1200 mbar. This variation does not only affect the testing pressure but also the concentration of dust and the level of turbulence, leading to wrong values of Pmax, Kst and assigning them to wrong concentrations. When tests for hybrid mixtures are conducted there are more degrees of freedom leading to even higher variations. To overcome these variations a higher accuracy is demanded for hybrid mixture testing. Further, in this presentation four standardized ignition sources are presented. T2 - Global Dust Safety Conference CY - Halifax, Canada DA - 01.03.2021 KW - hybrid mixtures, ignition sources, safety characteristics PY - 2021 AN - OPUS4-53557 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -