TY - GEN A1 - Klewe, Tim T1 - LIBS ConSort: Development of a sensor-based sorting method for constuction and demolition waste N2 - Closed material cycles and unmixed material fractions are required to achieve high recovery and recycling rates in the building industry. In construction and demolition waste (CDW) recycling, the preference to date has been to apply simple but proven techniques to process large quantities of construction rubble in a short time. This is in contrast to the increasingly complex composite materials and structures in the mineral building materials industry. Manual sorting involves many risks and dangers for the executing staff and is merely based on obvious, visually detectable differences for separation. An automated, sensor-based sorting of these building materials could complement or replace this practice to improve processing speed, recycling rates, sorting quality, and prevailing health conditions. A joint project of partners from industry and research institutions approaches this task by investigating and testing the combination of laser-induced breakdown spectroscopy (LIBS) with near-infrared (NIR) spectroscopy and visual imaging. Joint processing of information (data fusion) is expected to significantly improve the sorting quality of various materials like concrete, main masonry building materials, organic components, etc., and may enable the detection and separation of impurities such as SO3-cotaining building materials (gypsum, aerated concrete, etc.) Focusing on Berlin as an example, the entire value chain will be analyzed to minimize economic / technological barriers and obstacles at the cluster level and to sustainably increase recovery and recycling rates. We present current advances and results about the test stand development combining LIBS with NIR spectroscopy and visual imaging. In the future, this laboratory prototype will serve as a fully automated measurement setup to allow real-time classification of CDW on a conveyor belt. T2 - 21. International Conference on Building Materials (Ibausil) CY - Weimar, Germany DA - 13.09.2023 KW - Material classification KW - Data fusion KW - Circular economy KW - LIBS KW - Recycling PY - 2023 UR - https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/58495 AN - OPUS4-58495 AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany