TY - JOUR A1 - Grasse, Fabian A1 - Trappe, Volker A1 - Hickmann, Stefan A1 - Meister, O. T1 - Lifetime assessment for GFRP-gliders using a representative substructure T2 - International Journal of Fatigue N2 - In a research project fatigue tests on two identical wing sections that are used as representative substitute components were performed to estimate lifetime enhancement of light-weight aircraft such as general aviation gliders. Single step fatigue tests at limit load on one component were compared with spectrum loading on the other. A characteristic damage behaviour was observed. Local buckling due to high shear loading of the sandwich core of the wing shell causes the main damage. Even though an intentionally high load level was chosen no increase of micro-cracking could be detected. Additionally no delamination effects in laminates or bondings were observed except the skin-core delamination which causes the buckling effect in the wing shell due to fatigue loading. Finally the concept of using representative substructures and accompanying specimen tests is an effective approach for in-service loading investigations and could also be applied to research on wind turbine blades. PB - Elsevier CY - Oxford KW - Glass fibre reinforced plastics (GFRP) KW - Grey scale value analysis KW - X-ray-refraction KW - Non-destructive testing (NDT) KW - Fatigue tests PY - 2010 UR - https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/20498 AN - OPUS4-20498 SN - 0142-1123 VL - 32 IS - 1 SP - 94 EP - 99 AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany