FG Prozess- und Anlagentechnik
Refine
Document Type
Way of publication
- Open Access (13)
Keywords
- CO2 methanation (7)
- Biogas upgrading (3)
- Biomethane production (3)
- Waste valorization (3)
- CO2 waste valorization (2)
- CeO2 (2)
- Cu catalysts (2)
- Green energy (2)
- Hydrothermal carbonization (2)
- Mixed-integer linear programming (2)
Institute
BTU
The urgent need to transform the energy landscape to achieve a sustainable future is underscored by policy commitments aimed at establishing a net-zero carbon economy by the year 2050. Within the EU, primary emphasis is directed towards the abatement of over 75% of emissions arising from electricity production, heat generation, transport, and industrial processes. In this work, technologies will be presented to engineer a low-carbon future.
Traditional food supply chains are often centralised and global in nature, entailing substantial resource consumption. However, in the face of growing demand for sustainability, this strategy faces significant challenges. Adoption of localised supply chains is deemed a more sustainable option, yet its efficacy requires verification. Supply chain analytics methodologies provide invaluable tools to guide decisions regarding inventory management, demand forecasting and distribution optimisation. These solutions not only enhance facilitate operational efficiency, but also pave the way for cost reduction, further aligning with sustainability objectives. This research introduces a novel decision-making approach anchored in mixed integer linear programming (MILP) and neighbourhood flow models defined in cellular automata to compare the environmental benefits and vulnerability to disruption of these two chain configurations. Additionally, a comprehensive cost analysis is integrated to assess the economic feasibility of incorporating layout changes that enhance supply chain sustainability. The proposed framework is applied on an ice cream supply chain across England over a one-year timeframe. The findings indicate the superiority of the localised configuration in terms of economic benefits, leading to savings exceeding £ 1 million, alongside important reductions in environmental impact. However, in terms of resilience, the traditional configuration remains superior in three out of the four examined scenarios.
This paper reviews and compares state-of-the-art cobalt-based catalysts and catalytic systems used to produce green and sustainable fuels using FTS. Being focused on comparing the effect of the catalyst formulation and synthesis method, the reactor type and operating parameters, as well as the quality of the obtained fuels, the aim is to identify the research gaps between these relevant research areas concerning production of green and sustainable fuels.
Mithilfe einer templatgestützten Synthese wurden poröse Kohlenstoffgerüste unter Verwendung von Silicagel als Templat hergestellt. Die chemische Gasphaseninfiltration (CVI) wurde hierbei als Synthese verwendet. Unter Variation verschiedener Reaktionsparameter zur Optimierung der Kohlenstoffabscheidung wurde dieser Prozess mathematisch modelliert and simuliert. Dabei konnten die experimentellen Ergebnisse gut mit den Modellen nachgebildet werden. Die zusätzliche Beschreibung der laminaren Strömung verbessert die Übereinstimmung deutlich.
Traditionally, sensitivity analysis has been utilized to determine the importance of input variables to a deep neural network (DNN). However, the quantification of sensitivity for each neuron in a network presents a significant challenge. In this article, a selective method for calculating neuron sensitivity in layers of neurons concerning network output is proposed. This approach incorporates scaling factors that facilitate the evaluation and comparison of neuron importance. Additionally, a hierarchical multi-scale optimization framework is proposed, where layers with high-importance neurons are selectively optimized. Unlike the traditional backpropagation method that optimizes the whole network at once, this alternative approach focuses on optimizing the more important layers. This paper provides fundamental theoretical analysis and motivating case study results for the proposed neural network treatment. The framework is shown to be effective in network optimization when applied to simulated and UCI Machine Learning Repository datasets. This alternative training generates local minima close to or even better than those obtained with the backpropagation method, utilizing the same starting points for comparative purposes within a multi-start optimization procedure. Moreover, the proposed approach is observed to be more efficient for large-scale DNNs. These results validate the proposed algorithmic framework as a rigorous and robust new optimization methodology for training (fitting) neural networks to input/output data series of any given system.
The Distributed Energy Systems (DES) or microgrid arose from the need to reduce greenhouse gases (GHG) emitted into the atmosphere by burning fossil fuels to generate energy. Reduction of energy losses, reconfiguration of the protection system and reduction of costs, and optimizing the configuration of these systems is recommended. Despite new research in literature, there is still a lack of optimization models that address the Brazilian reality. Therefore, the objective of this work is to introduce a decision-making framework for the design and operation of residential DES that takes into account the particularities of Brazil, based on mixed-integer programming models. The applicability of the framework is tested on a case study of a residential DES of 5 houses, located in Salvador, and used to compare scenarios pre- and post-COVID-19. The results show significant reduction in total annual cost and GHG emissions versus the base case without DES. This indicates that, although the country has a mostly “clean” energy matrix due to the use of hydroelectric plants, DES can enable improvement in residential electricity generation.
Distributed energy systems (DES) are promising alternative to conventional centralized generation, with multiple financial incentives in many parts of the world. Current approaches
focus on the design optimization of a DES through economic and environmental cost minimization. However, these two criteria alone do not satisfy long-term sustainability priorities of the system. The novelty of this paper is the simultaneous investigation of economic, environmental and exergetic criteria in the modelling of DES through the two most commonly used solution methodologies for solving multi-objective optimization problems – the weighted sum and the epsilon-constraint methods. Out of the set of Pareto optimal solutions, a best-compromised solution is chosen using the fuzzy-based method. Numerical results reveal reduction of around 93% and 89-91% in environmental and primary exergy input, respectively.
In this contribution, the model-based development of a novel process concept for the storage and release of ammonia in solids is proposed. The concept is validated by means of the Aspen Plus® process simulator. As a promising prospect, Hexaaminenickel(II) chloride is selected. After a preparative stage, the process can cycle between the storage and release of energy. The process is split in a reaction and a separation section, in such a way that the same equipment is used for both storage and release steps. Sensitivity analysis and design parameter optimization are used to determine key process parameters. The operation ranges from standard conditions (25 °C and 1 atm) to temperatures not higher than 120 °C. Moreover, the simulation results show that it is possible to store over 50% of the base material in form of ammonia, equivalent to almost 10 wt.% hydrogen, placing the concept within the specific system targets set by the U.S. Department of Energy.
Herein we study the economic performance of hydrochar and synthetic natural gas co-production from olive tree pruning. The process entails a combination of hydrothermal carbonization and methanation. In a previous work, we evidenced that standalone hydrochar production via HTC results unprofitable. Hence, we propose a step forward on the process design by implementing a methanation, adding value to the gas effluent in an attempt to boost the overall process techno-economic aspects. Three different plant capacities were analyzed (312.5, 625 and 1250 kg/hr). The baseline scenarios showed that, under the current circumstances, our circular economy strategy in unprofitable. An analysis of the revenues shows that hydrochar selling price have a high impact on NPV and subsidies for renewable coal production could help to boost the profitability of the process. On the contrary, the analysis for natural gas prices reveals that prices 8 times higher than the current ones in Spain must be achieved to reach profitability. This seems unlikely even under the presence of a strong subsidy scheme. The costs analysis suggests that a remarkable electricity cost reduction or electricity consumption of the HTC stage could be a potential strategy to reach profitability scenarios. Furthermore, significant reduction of green hydrogen production costs is deemed instrumental to improve the economic performance of the process. These results show the formidable techno-economic challenge that our society faces in the path towards circular economy societies.
Nowadays, the majority of the Reverse Water Gas Shift (RWGS) studies assume somehow model feedstock (diluted CO2/H2) for syngas production. Nonetheless, biogas streams contain certain amounts of CO/H2O which will decrease the obtained CO2 conversion values by promoting the forward WGS reaction. Since the rate limiting step for the WGS reaction concerns the water splitting, this work proposes the use of hydrophobic RWGS catalysts as an effective strategy for the valorization of CO2-rich feedstock in presence of H2O and CO. Over Fe-Mg catalysts, the different hydrophilicities attained over pristine, N- and B-doped carbonaceous supports accounted for the impact on the activity of the catalyst in presence of CO/H2O. Overall, the higher CO productivity (4.12 μmol/(min·m2)) attained by Fe-Mg/CDC in presence of 20% of H2O relates to hindered water adsorption and unveil the use of hydrophobic surfaces as a suitable approach for avoiding costly pre-conditioning units for the valorization of CO2-rich streams based on RWGS processes in presence of CO/H2O.