FG Anorganische Chemie
Refine
Year of publication
Document Type
Way of publication
- Open Access (2)
Keywords
- Crystal growth (23)
- Chemical vapor transport (18)
- Thermal analysis (16)
- Crystal structure (14)
- Thermodynamic modeling (12)
- Anorganische Chemie (11)
- 2D layered compounds (9)
- Periodensystem der Elemente (9)
- Allgemeine Chemie (7)
- Chemische Bindung (7)
Institute
Structural and Magnetic Transitions Caused by Dimer Formation in the CrCl3–MoCl3 Solid Solution
(2024)
In this work, we apply the concept of solid solutions to the two 2D transition metal trihalides CrCl3 and MoCl3. While CrCl3 belongs to the magnetically active CrX3 family, the magnetism in MoCl3 is intrinsically suppressed by the formation of aligned Mo–Mo
dimers, which also distort the regular honeycomb lattice that is typical for the 2D transition metal trihalides. We report suitable synthesis conditions for the gapless solid solution and crystal growth by chemical vapor transport. The CrCl3–MoCl3 solid solution was initially synthesized at 650 °C for 100 h under addition of MoCl5 as mineralizer, and bulk crystals were subsequently grown by vapor transport in a temperature gradient from
600 °C → 550 °C for 60 h. The obtained solid solution exhibits multiple composition-dependent phase transitions at room temperature, as confirmed by powder X-ray diffraction measurements. The possible presence of Mo–Mo dimers in the solid solution
was further investigated by infrared, Raman, electron energy loss, and nuclear quadrupole resonance spectroscopies. The combined results indicate that the Mo–Mo dimers are present over a wide range of compositions. Their orientation changes from parallel alignment for compositions from 70% ≤ c(Mo3+) ≤ 100% to random orientation for samples with c(Mo3+) < 70% content, which significantly affects the course of lattice parameters. Finally, the magnetic properties of the powder samples show a correlation between the Mo3+ content and the transition temperature into the low-temperature phase.
Nanoscale phase separation was induced in the K-doped RuCl3 van der Waals material by annealing, and studied with the goal to find a natural design strategy for the formation of two-dimensional architectures as an alternative to the costly and time-consuming experimental artificial growth methods. Phase conversion was traced by means of thermogravimetric analysis combined with mass spectrometry. The local crystal structure of co-existing K3Ru2Cl9 domains with the sizes of about 100 nm was solved by 3D electron diffraction.
The two-dimensional (2D) chromium trihalides CrCl3, CrBr3, and CrI3 are most famous for their exotic magnetic properties when their crystals get downscaled to nanometer dimensions. One way to tune the properties of such materials and to further increase their potential utility, e.g., in spintronics, is the formation of solid solutions. Here, we present a detailed theoretical and experimental study on the synthesis and nanoplatelet growth of CrBrxCl3–x and CrBrxI3–x solid solutions. Phase pure powder was obtained by tempering the respective parent compounds at 600 and 550 °C, using additional iodine in the case of CrBrxI3–x. The dominant stacking order changes at x = 1.8 for CrBrxCl3–x while remaining similar to CrI3 for the whole CrBrxI3–x series. A consecutive chemical vapor transport from 575 → 525 °C for 2 h (CrBrxCl3–x) or 600 → 550 °C for 3 h with 0.1 mmol additional iodine (CrBrxI3–x) resulted in the deposition of high-quality nanoplatelets on a substrate with only several nanometers in height. The composition can be controlled by the choice of the starting material, since only small shifts in the anion ratio occur during the transport. The deposited CrBrxCl3–x nanoplatelets can then be easily delaminated by ultrasonication in ethanol to reduce the height even further to few-layer dimensions. These nanoplatelets could potentially be used to investigate the property changes (e.g., in terms of magnetic response) for the downscaling of these solid solutions. We further demonstrate the quality of the deposited material by transmission electron microscopy, selected area electron diffraction, and X-ray photoelectron spectroscopy. Raman spectroscopy of the solid solution series reveals a complex evolution of vibrational modes. Photoluminescence measurements on solid solution samples show emission peaks in the near-infrared energy range with the specific energy and intensity being composition and temperature dependent.
Integrating enzymes into thermoplastic polymers is challenging due to their lack of robustness with respect to temperature and shear fields during conventional melt processing. In the present study, blown films from low-density polyethylene (LDPE) were prepared containing a technical protease from Bacillus sp. First, LDPE/protease compounds were produced followed by blown film extrusion, both processes at melt mass temperatures of 130 °C or higher. Enzyme activity was proven, both for the LDPE/protease compound and the blown film. The highest enzyme activity in the compound was determined for processing at 132 °C and a screw speed of 75 rpm. The influence of melt temperature and shear fields was studied in detail. Enzyme activities were determined for melt temperatures up to 160 °C and for screw speeds ranging from 75 to 300 rpm during compounding by twin-screw extrusion. The process was also applied for biobased and biodegradable polyesters, where similar protease activity after compounding was verified. Electron microscopy, X-ray diffraction, nuclear magnetic resonance spectroscopy and differential scanning calorimetry served to analyze components and morphology of the enzyme formulation used here. It is proposed that the porous morphology of the protease particles is beneficial for the enzyme to remain active after processing. Additionally, the polymer matrix surrounding the particles protects the protease at elevated temperatures, which can be attributed to thermal insulation. Thus, the right combination of a suited technical enzyme formulation with appropriate mild melt compounding conditions allows enzymes to be incorporated into thermoplastics and retain their activity. This opens the way to use the abundant biological functions of enzymes in thermoplastic applications.
In the search for novel 2D materials with potentially valuable properties, such as a tunable band gap for optoelectronic or catalytic applications, solid solutions hold the potential to significantly expand the inventory of available 2D nanomaterials. In this study, we present for the first time the synthesis of such 2D rhodium trihalide solid solutions: RhBrxCl3−x and RhBrxI3−x. We use thermodynamic simulations and simultaneous thermal analysis to predict conditions for their rational synthesis and to investigate suitable chemical vapor transport (CVT) parameters for these solid solutions. The evolution of the lattice parameters was investigated by powder x-ray diffraction, showing an isostructural relationship of the synthesized compounds and only minor deviation from Vegard's law. The optical band gap of these materials can be tuned in an energy range from 1.5 eV (RhCl3) to 1.2 eV (RhI3) by choosing the composition of the solid solution, while the samples also exhibit photoluminescence in similar energy ranges. Ultimately, the successful deposition of bulk as well as ultrathin 2D nanocrystals of RhBrxCl3−x by CVT from 925 °C to 850 °C is shown, where the composition of the deposited crystals is precisely controlled by the choice of the starting composition and the initial amount of material. The high quality of the obtained nanocrystals is confirmed by atomic force microscopy, high resolution transmission electron microscopy and selected area electron diffraction. For RhBrxI3−x, the CVT from 900 °C to 825 °C is more difficult and has only been practically demonstrated for an exemplary case. According to the observed properties, these novel solid solutions and nanocrystals show a great potential for an application in optoelectronic devices.
DUT-8(Ni) metal-organic framework belongs to the family of flexible pillared layer materials. The desolvated framework can be obtained in the open pore form (op) or in the closed pore form (cp), depending on the crystal size regime. In the present work, we report on the behaviour of desolvated DUT-8(Ni) at elevated temperatures. For both, op and cp variants, heating causes a structural transition, leading to an new, crystalline compound, containing two interpenetrated networks. The state of the framework before transition (op vs. cp) influences the transition temperature: the small particles of the op phase transform at significantly lower temperature in comparison to the macroparticles of the cp phase, transforming close to the decomposition temperature. The new compound, confined closed pore phase (ccp), was characterized by powder X-ray diffraction and spectroscopic techniques, such as IR, EXAFS, and positron annihilation lifetime spectroscopy (PALS). Thermal effects of structural cp to ccp transitions were studied using differential scanning calorimetry (DSC), showing an overall exothermic effect of the process, involving bond breaking and reformation. Theoretical calculations reveal the energetics, driving the observed temperature induced phase transition.
Synthesis of micro- and nanosheets of CrCl3–RuCl3 solid solution by chemical vapour transport
(2022)
Solid solutions of 2D transition metal trihalides are rapidly growing in interest for the search for new 2D materials with novel properties at nanoscale dimensions. In this regard, we present a synthesis method for the Cr1−xRuxCl3 solid solution and describe the behaviour of the unit cell parameters over the whole composition range, which in general follows Vegard's law in the range of a = 5.958(6)CrCl3 … 5.9731(5)RuCl3 Å, b = 10.3328(20)CrCl3 … 10.34606(21)RuCl3 Å, c = 6.110(5)CrCl3 … 6.0385(5)RuCl3 Å and β = 108.522(15)CrCl3 … 108.8314(14)RuCl3 °. The synthesized solid solution powder was subsequently used to deposit micro- and nanosheets directly on a substrate by applying chemical vapour transport in a temperature gradient of 575 °C → 525 °C for 2 h and 650 °C → 600 °C for 0.5 h as a bottom-up approach without the need for an external transport agent. The observed chromium chloride enrichment of the deposited crystals is predicted by thermodynamic simulation. The results allow for a nanostructure synthesis of this solid solution with a predictable composition down to about 30 nm in height and lateral size of several μm. When applying a quick consecutive delamination step, it is possible to obtain few- and monolayer structures, which could be used for further studies of downscaling effects for the CrCl3–RuCl3 solid solution. X-ray photoelectron spectroscopy, transmission electron microscopy and Raman spectroscopy were used to confirm the purity and quality of the synthesized crystals.
Direct Deposition of (BixSb1–x)2Te3 Nanosheets on Si/SiO2 Substrates by Chemical Vapor Transport
(2022)
The tellurides of bismuth and antimony (Bi2Te3 and Sb2Te3) are prominent members of the V2VI3 material family that exhibit promising topological properties. We provide a method for the rational synthesis of mixed crystals of these materials ((BixSb1–x)2Te3 with x = 0.1, ..., 0.9) by means of a bottom-up chemical vapor transport (CVT) approach. Thermodynamic calculations showed the synthesis to be possible in the temperature range of 390–560 °C without significant enrichment of either component and without adding a transport agent. The starting materials were synthesized and verified by X-ray diffraction (XRD). Optimization experiments showed the ideal conditions for nanosheet synthesis to be T2 = 560 °C, T1 = 390 °C with a reaction time of t = 36 h. Crystals with heights of down to 12 nm (12 quintuple layers) were synthesized and analyzed by means of scanning electron microscopy, energy-dispersive X-ray spectrometry, and atomic force microscopy. High-resolution transmission electron microscopy confirmed the R3̅m crystal structure, high crystallinity, and overall quality of the synthesized (BixSb1–x)2Te3 nanosheets. Magnetotransport measurements revealed that such ternary compounds can have a significantly reduced carrier density compared to the binary parent compounds.
Impacts of TGA furnace parameters for prediction of long-term thermal stability of ionic liquids
(2021)
The concept of maximum operation temperature is established for the prediction of the time dependent thermal stability of ionic liquids based on kinetic evaluation of thermogravimetric analysis. The influence of the furnace control parameters on the maximum operation temperature (MOT) is shown using the example of 1-methyl-3-propylimidazolium iodide ([C3C1im]I) with respect to three different parameter sets of a programmed proportional integral derivative (PID) controller of the TGA. Kinetics of thermal decomposition of [C3C1im]I have been investigated with the implementation of an improved kinetic model. The activation energy obtained using the Kissinger-Akahira-Sunose equation showed variations apparently due to the decomposition degree. The model compound is decomposed by a one-step kinetics, which results from pseudo zero order relationship of the activation energy to the conversion rate. The activation energy, pre-exponential factor, and the activation energy are strongly dependent on the parameters of TGA furnace controller.
New racemic and enantiopure N-phosphorylated thioureas bearing 1-phenylethyl or tetrahydronaphthalenyl fragments were synthesized. According to NMR data assisted by DFT calculations, the preferred conformation is stabilized by an intramolecular hydrogen bond. This form in solution is in equilibrium with dimeric N–H···S hydrogen-bonded associates, the population depending on the concentration. In the crystalline phase the low-energy conformation with an intramolecular H-bond is realized only in the racemic tetrahydronaphthalenyl derivative. In most crystals various types of intermolecular hydrogen bonding are observed, accompanied by the formation of infinite linear chains or helical structures. Due to the conformational lability of compounds and competitive intermolecular H-bonding, multiple polymorphic modifications are formed. Therefore, crystallization of enantiopure 1-phenylethyl derivatives from various solvents results in concomitant polymorphs at room temperature. One of them undergoes reversible two-step phase transitions from the high-symmetry I41 space group (Z′ = 1, no disorder) via the P41 space group (Z′ = 6) to the monoclinic P21 space group (Z′ = 16) accompanied by drastic concerted conformational changes. Notably, the optimization of the crystal packing is observed upon phase transitions with a gradual reduction of the void space in the unit cell from 4.5% to 0.8%. This is a rare case of several high-Z′ polymorphs for one compound, with chirality playing an important role.