FG Füge- und Schweißtechnik
Refine
Year of publication
Document Type
Way of publication
- Open Access (7)
Keywords
- schweißen (26)
- fügen (23)
- Fügetechnik (19)
- welding (12)
- Simulation (10)
- mechanical properties (8)
- microstructure (6)
- Laserstrahlschweißen (5)
- Schweißsimulation (5)
- Al – Mg – Si alloy (4)
Institute
In the present work, laser beam build-up welding of AlSi12 alloy powder on AlSi1MgMn-alloy (EN AW-6082) substrate has been studied to determine the laser deposition strategy for fabrication of 3-D structure. First, the influence of laser power, scanning speed and powder feeding rate on the output parameters, such as clad geometry, dilution ratio, powder efficiency and porosity were analysed for deposition of a single track. Mathematical relationships were then established and the optimal parameters were identified by the desirability approach. Second, these optimal process parameters are furthermore adjusted to fabricate rectangular, cylindrical and complex combination volumes; different layer deposition strategies are used and evaluated. Finally, by using an adapted deposition strategy, one prototype consisted of different complexly shaped elements on one curved Al-alloy substrate without welding fusion defects was manufactured. The average tensile strength of deposited
samples with four different layer deposition directions (vertical 0°/90°; horizontal 0°/90°; horizontal 0° and horizontal 90°)
was measured, respectively, which are comparable strengths or higher than those of cast samples. The microstructure of the
laser-deposited material is investigated using optical microscopy and scanning electron microscopy as well as microcomputed
tomography. Microstructure and hardness of deposited multilayers exhibit inhomogeneous distributions, which vary with the deposit location
Thermal shock behavior of ceramics plays a decisive role in their broad industrial applications. For
enhanced understanding of damage and failure mechanism under thermal shock loading, in the present
work, a combination of experimental testing and numerical simulation methods has been used. The
thermal shock behavior of the alumina (99.7%) disk samples has been investigated by using a plasma
test stand: the bottom of the ceramic disks were locally heated in the center by plasma beam; during the
heat treatment the temperature distribution at the top of the sample was recorded with a thermographic
system. To characterize the thermal shock resistance, a thermomechanical simulation was subsequently
carried out. It calculates the temperature and stress distribution within the ceramic disks. The
calculated critical thermal tension stresses are reported, which led to the failure of the ceramic disks
under thermal shock loading. The effect of the sample thickness on the temperature and stress
distribution is presented. Compared with the experimental results the simulated results show excellent
agreement. As conclusion, it is possible to determine the thermal shock behavior of ceramic materials by
the combination of experimental testing and numerical simulation.