FG Füge- und Schweißtechnik
Refine
Year of publication
Document Type
Way of publication
- Open Access (5)
Keywords
- schweißen (10)
- fügen (9)
- Fügetechnik (7)
- Laserstrahlschweißen (4)
- Simulation (4)
- strukturiert (4)
- welding (4)
- Elektrodengeometrie (3)
- Leichtbauelement (3)
- Rollennahtschweißen (3)
Institute
This work presents a comparative study towards the development of efficient micro-reactors based on 3D-printed structures. Thus, the study evaluates the influence of the metal substrate geometry on the performance of structured catalysts for the CO2 methanation reaction. For this purpose, 0.5%Ru–15%Ni/MgAl2O4 catalyst is wash coated over two different micro-monolithic metal substrates: a conventional parallel channel honeycomb structure and a novel 3D-printed structure with a complex gyroid geometry. The effect of the metal substrate geometry is analyzed for several CO2 sources including ideal flue gas atmospheres, the presence of residual CH4 and CO in the flue gas, as well as simulated biogas sources. The advantages of the gyroid-3D complex geometries over the honeycomb structures are shown for all evaluated conditions, providing at the best-case scenario a 14% improvement of CO2 conversion. Moreover, this contribution shows that systematically tailoring geometrical features of structured catalysts becomes an effective strategy to achieve improved catalysts performances independent of the flue gas composition. By enhancing the transport processes and the gas-catalyst interactions, the employed gyroid 3D metal substrates enable boosted CO2 conversions and greater CH4 selectivity within diffusional controlled regimes.
Numerical models for thermo-mechanical simulation of the welding
residual stresses in laser beam and multi-pass arc welded joints are developed. The models describe the resulting microstructure as a function of the peak temperature, austenization time, cooling time and take into account the microstructure formed after
single or multiple thermal cycles. The results of simulations are validated by neutron diffraction experiments performed on FSD diffractometer at the IBR-2 pulsed reactor in FLNP JINR (Dubna, Russia). The elaborated numerical models are in good agreement
with obtained neutron diffraction data, which enable to study the influence of different conditions and process parameters on the distribution of residual welding stresses.
Rollennahtelektrode
(2017)
Eine Rollennahtelektrode zur Verwendung beim Rollennahtschweißen umfasst eine segmentförmige Elektrodenfläche (2) zur Anpressung der zu verbindenden Bauteile und zur Einleitung des Schweißstroms und der Schweißspannung. Die Elektrodenfläche (2) ist derart dreieckförmig oder mäanderförmig oder zueinander beabstandet ausgebildet, dass in der ebenen Abwicklung der Elektrodenfläche (2) ein Zickzack-Muster oder ein Wellen-Muster oder ein Steppnaht-Muster oder ein Rechteck-Muster vorliegt.
Verbesserte Verzugsvorhersage beim Laserstrahlschweißen durch Implementierung eines Prozessmodells
(2006)
Cold cracks in welds are the result of the formation of brittle microstructure as martensite in the presence of diffusible hydrogen as well as of tensile stresses. Cold cracks occur when the combination of cold crack influence parameters (CCIP) overcomes a critical limit. In this study, critical combinations of CCIP were identified with an enhanced test procedure under welding conditions. The test is based on the physical simulation technique of heat affected zone (HAZ) and it is carried out using the test and simulation center Gleeble 3500. Thereby, laboratory special specimens are charged with hydrogen from pure hydrogen atmosphere in the initial stage of the test. Rigidly restraint specimen section is subjected to different weld temperature cycles. Through the thermal exposure, the desired microstructure of HAZ is set in the test zone of the restraint specimen section. A plastic deformation takes place owing to the prevented expansion during heating and contraction of the specimen during cooling. Consequently, compressive or tensile reactions stresses arise in the deformed zone. Cracked specimen represents a critical combination of the CCIP. The quantitative cold crack criterion separates the cold crack susceptible combinations from those non susceptible.
Mixing of steel and aluminum within the weld pool during keyhole laser welding results in a complex dissimilar microstructure, which in turn, initiates a shift in weld metal mechanical properties. In this study, a numerical model for computation of distortions in laser-welded dissimilar overlap joints (austenitic stainless steel 304 – 6082-T6 aluminum alloy), which considers properties of the mixed steel-aluminum weld metal was developed. The required yield strength, Young's modulus, and strain hardening exponent of the weld metal were experimentally determined using the indentation technique coupled with energy-dispersive X-ray spectroscopy. The designed material model calculates the weld elastic-plastic properties as a function of the aluminum concentration. The softening of the alloys in the heat-affected zone was determined by physical simulations and considered as a function of maximum temperature. Computed and measured distortions showed good agreement for various welding regimes with an average deviation of 18.4%. The sensitivity analyses indicated that the application of the developed weld material model significantly improves the accuracy of the thermomechanical simulations.
The beam inclination leads to a change in the laser spot size on the material surface. The higher the inclination, the larger the irradiated area and the lower the laser intensity. Moreover, if the material surface is outside of the beam focal plane, the intensity distribution profile becomes asymmetric. In this study, a heat source model, which calculates the intensity distribution on the workpiece surface as a function of beam parameters (beam waist, divergence half-angle) and process parameters (laser power, incidence angle, and distance to focal plane) was developed. The applicability of the heat source model was demonstrated by simulating 4 different laser hardening regimes. Once the heat efficiency coefficient had been calibrated the developed finite-element model allowed computation of temperatures while hardening with perpendicular laser beams as well as with inclined beams. The open-source software FEniCSx was used for the finite element computations. The mathematical formulation, required for performing temperature simulations with FEniCSx was briefly introduced.
Knowledge of the properties of dissimilar welds is of great significance for the development of multi-material lightweight structures. In this study, stainless steel (1.4301) and aluminum alloy (6082-T6) sheets were welded in overlap configuration in keyhole mode. The resulting weld metals were investigated with respect to their mechanical properties. Several samples were cut out of different locations along the welds and their cross-sections were subjected to indentation testing and energy dispersive X-ray (EDS) analysis. Young's modulus E, yield stress σy, and strain hardening exponent n, were determined by means of reverse analysis of the indentation load (P) – depth (h) curves, allowing construction of true stress – true strain relations. An essential increase in yield stress in comparison to the one of the base alloys was observed inside the weld metal. In contrary, Young's modulus and strain hardening exponent of the welds were almost identical to corresponding values of the base steel metal. Due to the sensitivity of yield stress to the aluminum content, slight variations of the welding parameters lead to significant changes in elastic-plastic behavior of the weld metal.
Great attention is focused nowadays on laser welding of dissimilar steel-aluminum joints in overlap configuration in key-hole mode. It was found that elastic-plastic properties of the weld metal exhibit strong difference to those of the base alloys and can be defined as a function of aluminum content in the weld metal. A developed Finite-Element simulation model allows prediction of the aluminum content as a function of welding parameters and subsequently the elastic-plastic properties of the weld metal as a function of the determined content. The main goal of the present study is to show the impact of the weld metal properties on welding distortions and residual stresses. For that purpose, a sensitivity analysis of the thermomechanical model was performed, where the distortions and residual stresses were computed as a function of welding parameters and therefore as a function of corresponding weld metal properties. The analysis showed that the influence of the weld metal is essential, and its properties should be taken into consideration in the models for better prediction accuracy.
In this study, a three-dimensional thermal conduction model based on the finite element analysis was established to predict a heat distribution during laser welding in overlap configuration of austenitic stainless steel 1.4301 and hardenable aluminum alloy 6016. A hybrid model based on two expanded curve-rotated volumetric heat sources is suggested to capture the complex weld geometry. Since thermal flow in the overlap area is a crucial part of the model, an analytic calculation of a thermal contact conductance between the plates and its subsequent implementation in the FE model through a superposition of two contact surfaces are described in details in this paper. Full thermal cycles, weld shapes, and thus mixing grades were successfully predicted by means of the developed model for different parameter combinations.