FG Angewandte Physik und Halbleiterspektroskopie
Refine
Year of publication
Document Type
- Scientific journal article peer-reviewed (223)
- Conference Proceeding (196)
- Article (123)
- Doctoral thesis (41)
- Conference publication not peer-reviewed (30)
- Scientific journal article not peer-reviewed (18)
- Part of a book (chapter) (16)
- Image (poster) (9)
- Report (3)
- Conference publication peer-reviewed (1)
Way of publication
- Open Access (10)
Keywords
- X-ray photoelectron spectroscopy (XPS) (26)
- X-ray photoelectron spectroscopy (24)
- atomic layer deposition (23)
- resonant photoelectron spectroscopy (17)
- Atomic layer deposition (ALD) (15)
- XPS (14)
- atomic layer deposition (ALD) (13)
- PVDF (12)
- TiO2 (12)
- water splitting (12)
Institute
- FG Angewandte Physik und Halbleiterspektroskopie (661)
- FG Nanobiotechnologie (2)
- AG Physikalische Chemie II (1)
- Energie-Innovationszentrum / Energy Storage and Conversion Lab (1)
- FG Computational Physics (1)
- FG Experimentalphysik und funktionale Materialien (1)
- FG Prozess- und Anlagentechnik (1)
- FG Technische Chemie (1)
- FG Thermodynamik / Thermische Verfahrenstechnik (1)
Atomic layer deposition (ALD) is known to produce amorphous and defect-rich films in a layer-by-layer fashion, which can potentially give rise to unexpected material properties. In particular, ultrathin films (few monolayers) will show the highest complexity, as the substrate-material interaction will play a major role during deposition. Therefore, it is crucial to understand the early stages of growth of the ALD process to control and potentially tailor this interfacial interaction. Applying a surface science approach combined with complementary ex-situ characterization, we have studied by in-situ X-ray photoelectron spectroscopy (XPS) the early stages of ceria (CeOx) growth on SiO2 substrates deposited by thermal-ALD using Ce(thd)4/O3. Interestingly, an initial mixture of Ce3+ and Ce4+ was observed, although only Ce4+ may be expected considering the used precursor and oxidant. This fact, together with a deviation from the ideal layer-by-layer growth and a higher growth rate during the first cycles, indicates a significant influence of the substrate of the ALD reaction mechanism as well as a correlation between morphology and ceria oxidation state.
Ni/ceria catalysts exhibit a high activity for methane to methanol conversion, making them very promising for applications within a sustainable economy. Possibly, their activity may be strongly enhanced due to the facile exchange between Ce4+ and Ce3+ states, with the latter likely responsible for activating O-H and C-H bonds. Here, we aim to unravel the complex metal-oxide interactions in the inverse CeOx/Ni(111) system under oxidizing and reducing environments. Using low-energy electron diffraction (LEED) we find that the CeOx(111) grown by reactive molecular beam epitaxy preferentially aligns with the main directions of the Ni(111) substrate or is azimuthally rotated by ±10°. By using X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS), we find that less NiO is formed during deposition of CeOx than when it is held without ceria at the same conditions (O2 partial pressure and temperature). Finally, we observe a complex behavior of the cerium and nickel oxidation states when exposing the system to O2 or H2 atmospheres.
The need to store and use hydrogen safely as part of green economy based on renewable energy evokes a necessity to reliably detect it at ambient conditions. The majority of currently used sensors are working at elevated temperatures (200-500 °C). In this work, we demonstrate that ceria films deposited on a commercial electrode by atomic layer deposition (ALD) and electron beam evaporation (EBE) electrically respond to hydrogen (from 20 to 500 ppm) at much lower temperatures (50-200 °C). The results reveal that <1.5 nm thin Pd adlayer increases the electrical response by several orders of magnitude for both ceria films. The NAP-XPS study under changing oxidative/reductive atmospheres sheds light on the mechanism of Pd-CeOx thermal activation and the role of the deposition technique in the reactivity of the oxide.
Inverse oxide/metal catalysis allows achieving better catalytic performance than its traditional counterpart. For example, in cerium-based inverse catalyst systems, the Ce3+ states have been shown to be the active sites for methanol synthesis. This suggests that the activity can be enhanced by promoting those through alloying with trivalent, catalytically active rare-earth metals, as, e.g. Sm. We present low-energy and X-ray photoemission electron microscopy (LEEM/XPEEM), investigations that show how epitaxially grown (100)- and (111)-oriented CeO2 islands may be modified and/or alloyed by post-deposited metallic Sm. For the Ce1−xSmxO2−δ/Ru(0001) system, the CeO2 (111)-oriented islands undergo a structural change, concomitant with a partial conversion from Ce4+ to Ce3+. Surprisingly, for Ce1−xSmxO2−δ/Cu(111) the result is found to be face-dependent since only (100)-oriented CeOx islands were reduced whereas the (111)-oriented islands remained unaltered. Both systems have been exposed to reducing (H2) and oxidizing (CO2) conditions, resulting in higher reduction and in a complete recovery of the Ce4+ states, respectively. These unexpected results indicate a complex interaction not only between cerium and the doping element, but also an intricate interplay with the metallic substrate.
Atomic layer deposition (ALD) is well known to lead to amorphous and defective, non-stoichiometric films, potentially resulting in modified material properties that can also be affected by film/substrate interaction in the case of ultra-thin growths. For example, the formation, diffusion, and recovery of oxygen vacancies can be favored in disordered, reducible metal oxides compared to more ordered deposits, whereas interdiffusion processes can critically affect the film/substrate interface region. These effects have extensively been studied for thin thermal-ALD ceria films (below 15 nm) by combining in-situ and ex-situ characterization techniques in our lab and at synchrotron radiation facilities. While using alumina or silica substrates modifies the initial growth rate, Ce3+/Ce4+ ratio, and ceria morphology, the formation of different species at the interface affects its reactivity. Interestingly, the experiments have shown high reducibility of ALD-ceria ultrathin films on silica for very low hydrogen concentrations, even at room temperature, whereas for alumina substrates the formation of aluminates at the interface prevents further oxidation. Moreover, the comparison with more ordered films indicates a key role of the defective structure of ALD films in Ce3+/Ce4+ conversion.
Atomic layer deposition (ALD) has been used extensively to grow homogeneous films with excellent coverage and atomic-scale thickness control for a variety of applications. However, remaining challenges include the investigation of novel precursor-oxidant combinations for low-temperature deposition as well as unraveling the complex interplay between substrate and coating for ultrathin films. In this work, we present a detailed investigation of ultrathin cerium oxide films grown using the novel Ce(dpdmg)3 precursor with H2O and O2. Following a surface science-based approach, we have combined operando spectroscopic ellipsometry and in-situ X-ray photoelectron spectroscopy to allow rapid process optimization and determination of the complex relation between oxide stoichiometry, film thickness and ALD growth parameters, revealing a distinct dependence of inital Ce3+ content on the film thickness and choice of oxidant. This offers the possibility of adjusting the oxide properties to application requirements e.g. in gas sensing by choosing a suitable precursor-oxidant combination.
Perovskite solar cells (PSCs) excel in achieving high open-circuit voltages (VOC) for narrow bandgaps (∼1.6 eV) but face challenges with wide-bandgap perovskites, like methylammonium lead trichloride (MAPbCl3) with a 3.03 eV bandgap. These materials are transparent in visible absorbing ultraviolet (UV) light. However, achieving uniform film crystallization remains a hurdle. Here, we enhance MAPbCl3 crystallization by manipulating annealing atmospheres (nitrogen, air, and MACl vapor). Excess MACl vapor improves surface coverage, which is crucial for film stability. We demonstrate that the microstructure of the perovskite film, including surface morphology, grain boundaries, and interfaces, can affect the photovoltaic properties. The subsequently obtained VOC of 1.78 V is the highest recorded for single-junction PSCs to the best of our knowledge. Surprisingly, the conventional hole-transport layer spiro-OMeTAD, optimized for narrow bandgaps, sustains such high voltages. Photoluminescence measurements reveal a trap-assisted recombination peak at 1.65 eV, indicating deep traps as significant to voltage loss in MAPbCl3.
β-Ga2O3 (GaO) holds great promise in high-power applications. GaO is predicted to outperform the leading technologies based on SiC and GaN due to a three times higher calculated critical field strength. It has been identified that alloying with Al results in an almost linear increase in the bandgap between Ga2O3 (4.85eV) and Al2O3 (7eV). A critical issue in the bandgap engineering of GaO is maintaining reasonable electron mobility, which is low for the pure material (150cm2/V/S). This project aims to explore GaO by Al alloying, which allows tunable wide bandgaps for engineering material properties and at the same time maintains excellent crystal quality. PXRD and their Rietveld refinement on several AlGaO crystals indicate a preferential ordering of Al and Ga over octahedral and tetrahedral sites. The results of an SXRD study using synchrotron radiation addressing the surface structure of β-AlxGa2−xO3(100) substrates with x=0−0.25. Our results indicate that the GaO(100) surface is nearly bulk terminated and remains smooth up to 800°C and 10−5mbar of molecular oxygen.
The use of cerium oxide for hydrogen sensing is limited by the low electrical conductivity of layers deposited from a ceria target. To increase the electrical conductivity, partially reduced cerium oxide layers were obtained from a metallic cerium target by reactive magnetron sputtering. The proportions of the oxidation states Ce3+, present in reduced species, and Ce4+, present in fully oxidized species, were determined by ex-situ XPS. For electrical characterization, films were deposited on planarized tungsten finger electrodes. IV curves were measured over several days to investigate possible influences of oxygen and humidity on electrical conductivity. The morphological stability of the layers under ambient conditions was investigated by microscopical methods. The XPS results show a significant amount of Ce3+ in the layers. The electrical conductivity of as-grown samples is several orders of magnitude higher than that of samples grown from a ceria target. However, the conductivity decreases over time, indicating an oxidation of the layers. The surface morphology of the samples was found to be changing drastically within days, leading to partial delamination.
Copper oxide appears to be a promising candidate for a hole transport layer (HTL) in emerging perovskite solar cells. Reasons for this are its good optical and electrical properties, cost-effectiveness, and high stability. However, is this really the case? In this study, we demonstrate that copper oxide, synthesized by a spray-coating method, is unstable in contact with formamidinium lead triiodide (FAPI) perovskite, leading to its decomposition. Using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and ultraviolet–visible (UV–vis) spectrophotometry, we find that the entire copper oxide diffuses into and reacts with the FAPI film completely. The reaction products are an inactive yellow δ-FAPI phase, copper iodide (CuI), and an additional new phase of copper formate hydroxide (CH2CuO3) that has not been reported previously in the literature.
The high performance of platinum–tin catalysts for oxidation reactions has been linked to the formation of tin oxides at the metal surface, but little is known about the structure of these oxides or the chemical behavior that determines their catalytic properties. We show here how surface oxides on Pt3Sn(111) incorporate oxygen at the metal interface, which may be subsequently removed by reaction with CO. The storage mechanism, where oxygen uptake occurs without loss of interfacial Pt–Sn bonds, is enabled by the peculiar asymmetrical coordination state of Sn2+. O atoms are bound at pocket sites in the 2D oxide sheet between these outward-buckled Sn atoms and metallic Sn in the alloy surface below.
In-situ growth characterization of 2D heterostructures: MoSe2 on intercalated graphene/Ru(0001)
(2023)
Despite the great fundamental interest in 2D heterostructures, most of the investigated 2D heterostructures were realized by mechanical exfoliation or chemical vapor deposition in the millibar range, preventing true in-situ characterization of the growth process. Here, we have investigated the growth of MoSe2 on single-layer graphene on Ru(0001) via real-time in-situ low-energy electron microscopy and micro-diffraction. After preparation of the graphene by standard procedures from an ethylene precursor, MoSe2 has been prepared via co-deposition of Mo and Se. Prior Se intercalation of the graphene appears to enhance the subsequent growth of MoSe2 on the graphene. At elevated temperatures, rotational ordering of the MoSe2 is facilitated by the strongly enhanced mobility of single-domain MoSe2 islands that align with the high symmetry orientations of the underlying graphene, indicating a non-negligible interaction between the two van-der-Waals materials. Micro-spot angle-resolved photoemission proves the monolayer nature of the as-grown MoSe2 as well as the free-standing character of the Se-intercalated graphene underneath.
A super-cycle approach to atomic layer deposition of indium-gallium-zinc oxide at low temperature
(2023)
The continuing development of multifunctional devices needs novel multicomponent oxide layers, demanding a high control of both composition and thickness during their preparation. To this end, single metal oxides exhibiting high structural quality and conformity have successfully been grown by atomic layer deposition (ALD). However, the deposition of more complex compounds with specific optical and electrical properties is still challenging. In this work, we follow a bottom-up approach to design an ALD super-cycle to grow mixed indium-gallium-zinc oxide (IGZO) films with a controllable composition. For the formation of the individual indium, gallium, and zinc oxides, we found the use of plasma-enhanced ALD (PEALD) at 150 °C to be favorable when using the organometallic precursors trimethylindium, trimethylgallium, and diethylzinc together with oxygen plasma. The PEALD approach of IGZO films can particularly overcome a nucleation delay within the ZnO sub-cycle known from thermal ALD, achieving a higher growth per cycle and improving the quality and composition homogeneity of the films as shown by in-situ spectroscopic ellipsometry and ex-situ X-ray photoelectron spectroscopy.
Atomic layer deposition (ALD) exhibits a high potential for integration as a scalable process in microelectronics, allowing well-controlled layer-by-layer deposition and conformal growth on 3D structures. Yet, the ALD technique is also well known to lead to amorphous and defective, non-stoichiometric films, potentially resulting in modified materials properties that, in the case of ultra-thin deposits, can also be affected by film/substrate interaction. Interestingly, initial in situ X-ray photoemission spectroscopy (XPS) measurements of ceria ALD-deposits on Al2O3/Si, sapphire, and SiO2 substrates confirm a Ce3+/Ce4+ mixture dependent on the substrate interaction, deposit thickness, and morphology. Using near-ambient pressure XPS, we have significantly reduced ultrathin (< 10 nm) ceria films grown by ALD by exposing them to different O2/H2 partial pressures at moderate temperatures (< 525K). Notably, the total amount of reduction to Ce3+ is found to depend on the deposit thickness and initial ceria/substrate interaction. Furthermore, the intrinsic defects related to the ALD method seem to play a critical role in the reversible reduction at room temperature.
Epitaxial graphene growth has often been studied on close-packed transition metal substrates, e. g., the Ru(0001) surface, which is a well-studied model system for strong graphene-support interaction. Here, we focus on a Ru surface with different symmetry, i. e., the Ru(10-10) surface, to investigate the influence of the presumably modified graphene-substrate interaction on the growth of epitaxial monolayer and bilayer graphene (MLG, BLG) islands. The structural and chemical differences of the graphene on the two different surfaces are investigated by photoemission electron microscopy (PEEM), delivering information on both morphology and electronic structure. In-situ PEEM observation of graphene growth on the Ru(10-10) substrate by ethylene decomposition reveals the growth characteristics of MLG and BLG, the latter showing second layer nucleation via surface segregation of carbon. Furthermore, depending on growth temperature and relative orientation of the growing islands and surface steps, different growth characteristics are observed, in contrast to previous studies of the graphene/Ru(0001) system whereas similar electronic properties seem to prevail. Yet, when the MLG is decoupled from the Ru(10-10) substrate via intercalation of oxygen a distinct shift in work function is identified, slightly different from the resulting shift on Ru(0001).
Hydrogen is an efficient source of clean and environmentally friendly energy. However, because it is explosive at concentrations higher than 4%, safety issues are a great concern. As its applications are extended, the need for the production of reliable monitoring systems is urgent. In this work, mixed copper–titanium oxide ((CuTi)Ox) thin films with various copper concentrations (0–100 at.%), deposited by magnetron sputtering and annealed at 473 K, were investigated as a prospective hydrogen gas sensing material. Scanning electron microscopy was applied to determine the morphology of the thin films. Their structure and chemical composition were investigated by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. The prepared films were nanocrystalline mixtures of metallic copper, cuprous oxide, and titanium anatase in the bulk, whereas at the surface only cupric oxide was found. In comparison to the literature, the (CuTi)Ox thin films already showed a sensor response to hydrogen at a relatively low operating temperature of 473 K without using any extra catalyst. The best sensor response and sensitivity to hydrogen gas were found in the mixed copper–titanium oxides containing similar atomic concentrations of both metals, i.e., 41/59 and 56/44 of Cu/Ti. Most probably, this effect is related to their similar morphology and to the simultaneous presence of Cu and Cu2O crystals in these mixed oxide films. In particular, the studies of surface oxidation state revealed that it was the same for all annealed films and consisted only of CuO. However, in view of their crystalline structure, they consisted of Cu and Cu2O nanocrystals in the thin film volume.
La-doped SrTiO3 thin films with high structural quality were homoepitaxially grown by the metal–organic vapor phase epitaxy (MOVPE) technique. Thermogravimetric characterization of the metal–organic precursors determines suitable flash evaporator temperatures for transferring the liquid source materials in the gas phase of the reactor chamber. An adjustment of the charge carrier concentration in the films, which is necessary for optimizing the thermoelectric power factor, was performed by introducing a defined amount of the metal–organic compound La(tmhd)3 and tetraglyme to the liquid precursor solution. X-ray diffraction and atomic force microscopy verified the occurrence of the pure perovskite phase exhibiting a high structural quality for all La concentrations. The electrical conductivity of the films obtained from Hall-effect measurements increases linearly with the La concentration in the gas phase, which is attributed to the incorporation of La3+ ions on the Sr2+ perovskite sites by substitution inferred from photoemission spectroscopy. The resulting structural defects were discussed concerning the formation of occasional Ruddlesden–Popper-like defects. The thermoelectric properties determined by Seebeck measurements demonstrate the high potential of SrTiO3 thin films grown by MOVPE for thermoelectric applications.
Conversion of waste heat energy into electrical energy by exploiting the thermoelectric effect in solids promises a great contribution to energy harvesting concepts. However, most thermoelectric materials use toxic Pb or Te. Recently, La-doped SrTiO3 has gained a lot of interest as a potential candidate for thermoelectric devices for its good thermoelectric properties, chemical and thermal stability. In this paper, we report the homoepitaxial growth of La-doped SrTiO3 thin films by metalorganic vapor phase epitaxy (MOVPE) technique, which works at high oxygen partial pressures and offers upscaling potential for industry. The adjustment of charge carrier concentration, necessary for thermoelectric power factor optimization, was performed by introducing a defined amount of the metal-organic precursor La(tmhd)3 and tetraglyme to the liquid precursor solution. X-ray diffraction and atomic force microscopy verified a pure perovskite phase with high structural quality. The electrical conductivity increases linearly with the La concentration in the gas phase, which is attributed to the substitution of La+3 ions on the Sr+2 sites inferred from photoemission spectroscopy.
Exchange (XC) or spin-orbit (SOC) interaction cause electron scattering from surfaces to be spin dependent. The resulting spin filtering of the scattered electron beam can be used in spin-polarization analyzers. These analyzers are implemented in, for instance, photoemission setups to obtain spin resolution. Therefore, for promising targets, electron reflectivity and resulting spin asymmetry of very-low-energy electrons are measured for a wide range of incident electron energies and angles. By this, the investigated target is put to a test regarding the usability as a scattering target in a spin-polarization analyzer.
Here, several results of SOC- as well as XC-influenced targets are presented. The results of the SOC-influenced targets Au(111), single-layer MoS2/Au(111) and W(110) [1] are compared with the results of the XC-influenced target Fe(001)-p(1x1)O [2]. Additionally, the influence of SOC interaction in the case of the XC-influenced target is investigated. The spin asymmetry caused by SOC is found to be one order of magnitude smaller than the spin asymmetry caused by XC.
[1] Angrick et al., J. Phys.: Condens. Matter 33, 115001 (2020).
[2] Thiede et al., Phys. Rev. Applied 1, 054003 (2014).
Unraveling van der Waals epitaxy: A real-time in-situ study of MoSe2 growth on graphene/Ru(0001)
(2023)
In the present work we investigate the growth of monolayer MoSe2 on selenium-intercalated graphene on Ru(0001), a model layered heterostructure combining a transition metal dichalcogenide with graphene, using low energy electron microscopy and micro-diffraction. Real-time observation of MoSe2 on graphene growth reveals the island nucleation dynamics at the nanoscale. Upon annealing, larger islands are formed by sliding and attachment of multiple nanometer-sized MoSe2 flakes. Local micro-spot angle-resolved photoemission spectroscopy reveals the electronic structure of the heterostructure, indicating that no charge transfer occurs within adjacent layers. The observed behavior is attributed to intercalation of Se at the graphene/Ru(0001) interface. The unperturbed nature of the proposed heterostructure therefore renders it as a model system for investigations of graphene supported TMD nanostructures.
Interface engineering is a common strategy for passivating surface defects to attain open circuit voltages (Voc) in perovskite solar cells (PSCs). In this work, we introduce the concept of polishing a perovskite thin-film surface using a nanosecond (ns) pulsed ultraviolet laser to reduce surface defects, such as dangling bonds, undesirable phases, and suboptimal stoichiometry. A careful control of laser energy and scanning speed improves the photophysical properties of the surface without compromising the thickness. Using laser polishing, a Voc of 1.21 V is achieved for planar PSCs with a triple cation composition, showing an improved perovskite/hole transport interface by mitigating surface recombination losses. We measure an efficiency boost from 18.0% to 19.3% with improved stability of up to 1000 h. The results open the door to a new class of surface modification using lasers for interface passivation in well-controllable, automated, scalable, and solvent-free surface treatments.
The photosensitive and rectifying properties of Ga2O3 are described by (n-type) intrinsic (π-) electrons. These polaronic screened multiatomic carriers populate the intrinsic defect states within the ionic gap; their spectroscopic evidence is based on resonant photoemission spectroscopy data that also provide the ionicity factor of Ga2O3 and the size of the ionic gap. The π-electron density depends on the internal potential and its photo- and field-induced dipole contributions, and it describes the observed combined ohmic-exponential carrier densities and current–voltage dependences. The π-electron dynamics is caused by pairing and dissociation dipoles in the bulk of Ga2O3. The material properties of the electrode contribute via external chemical potentials and define the criteria for ohmic and rectifying contacts. This quantitative and predictive concept not only convinces by perfect agreement with published experimental data but also points toward the achievable performance limits of UV absorbers and rectifying devices.
Platinum–tin surfaces are active for CO oxidation, but their activity and the effects of tin oxide phases that form under reaction conditions are poorly understood. We have studied surface alloys of tin prepared on platinum single crystals during catalytic CO oxidation using near-ambient-pressure X-ray photoemission spectroscopy. On the flat terraces of Sn/Pt(111), a wetting layer of Sn(II) surface oxide forms, while on the stepped Sn/Pt(223) surface, 3D clusters of Sn(IV) oxide are formed. Oxidation of tin by O2 competes with the reduction of the oxides by CO under reaction conditions. Oxides that do not completely cover the surface can be reduced to metallic tin, while a fully covering layer of Sn(II) oxide cannot, showing the importance of oxide edge sites for the reduction process. The samples where 2D oxide layers are formed show a higher CO oxidation activity than for pure platinum at low temperatures, while the Sn(IV) oxide clusters on the stepped surfaces do not affect the measured CO oxidation rate. We therefore identify 2D Sn(II) oxide as an active phase for CO oxidation. While oxide island edges appear to make only minor contributions to conversion under these conditions, reactions at these sites play a major role in determining the phases present and their transformations.
Interfaces in perovskite solar cells play a crucial role in their overall performance, and therefore, detailed fundamental studies are needed for a better understanding. In the case of the classical n–i–p architecture, TiO2 is one of the most used electron-selective layers and can induce chemical reactions that influence the performance of the overall device stack. The interfacial properties at the TiO2/perovskite interface are often neglected, owing to the difficulty in accessing this interface. Here, we use X-rays of variable energies to study the interface of (compact and mesoporous) TiO2/perovskite in such a n–i–p architecture. The X-ray photoelectron spectroscopy and X-ray absorption spectroscopy methods show that the defect states present in the TiO2 layer are passivated by a chemical interaction of the perovskite precursor solution during the formation of the perovskite layer and form an organic layer at the interface. Such passivation of intrinsic defects in TiO2 removes charge recombination centers and shifts the bands upward. Therefore, interface defect passivation by oxidation of Ti3+ states, the organic cation layer, and an upward band bending at the TiO2/perovskite interface explain the origin of an improved electron extraction and hole-blocking nature of TiO2 in the n–i–p perovskite solar cells.
This work presents a new ultra-high vacuum cluster tool to perform systematic studies of the early growth stages of atomic layer deposited (ALD) ultrathin films following a surface science approach. By combining operando (spectroscopic ellipsometry and quadrupole mass spectrometry) and in situ (X-ray photoelectron spectroscopy) characterization techniques, the cluster allows us to follow the evolution of substrate, film, and reaction intermediates as a function of the total number of ALD cycles, as well as perform a constant diagnosis and evaluation of the ALD process, detecting possible malfunctions that could affect the growth, reproducibility, and conclusions derived from data analysis. The homemade ALD reactor allows the use of multiple precursors and oxidants and its operation under pump and flow-type modes. To illustrate our experimental approach, we revisit the well-known thermal ALD growth of Al2O3 using trimethylaluminum and water. We deeply discuss the role of the metallic Ti thin film substrate at room temperature and 200 °C, highlighting the differences between the heterodeposition (<10 cycles) and the homodeposition (>10 cycles) growth regimes at both conditions. This surface science approach will benefit our understanding of the ALD process, paving the way toward more efficient and controllable manufacturing processes.
In this work, a reliable kinetic reaction mechanism was revised to accurately reproduce the detailed reaction paths of steam reforming of methane over a Ni/Al2O3 catalyst. A steady-state fixed-bed reactor experiment and a 1D reactor catalyst model were utilized for this task. The distinctive feature of this experiment is the possibility to measure the axially resolved temperature profile of the catalyst bed, which makes the reaction kinetics inside the reactor visible. This allows for understanding the actual influence of the reaction kinetics on the system; while pure gas concentration measurements at the catalytic reactor outlet show near-equilibrium conditions, the inhere presented temperature profile shows that it is insufficient to base a reaction mechanism development on close equilibrium data. The new experimental data allow for achieving much higher quality in the modeling efforts. Additionally, by carefully controlling the available active surface via dilution in the experiment, it was possible to slow down the catalyst conversion rate, which helped during the adjustment of the reaction kinetics. To assess the accuracy of the revised mechanism, a monolith experiment from the literature was simulated. The results show that the fitted reaction mechanism was able to accurately predict the experimental outcomes for various inlet mass flows, temperatures, and steam-to-carbon ratios.
Atomic layer deposition (ALD) allows preparation of conformal coatings with possibility to control their thickness at the submonolayer level, making it a good tool for depositing active layers on 3D structures. Our group is working on cerium oxide-based materials for hydrogen detection, which is difficult at ambient conditions due to the low sensitivity and long response time of the sensors. The cerium oxide layers prepared by ALD contain a lot of defects and provide an opportunity to overcome these complications. Thickness and morphology of the oxide films play an important role in defining the Ce3+/Ce4+ ratio, as well as the interface with the used substrate. Here, we compare cerium oxide thin films deposited by ALD techniques on SiO2 and Al2O3 substrates. The results reveal that the interface to the substrate can considerably influence the reactivity of the cerium oxide toward hydrogen and oxygen. Preparation of the oxides using two different precursors (commercial Ce(thd)4 and custom Ce(dpdmg)3) has been demonstrated to affect the redox properties of the films, their reactivity, and the reversibility.
It is assumed that plasma-enhanced atomic layer deposition (PEALD) cannot be used to prepare thin films on sensitive organic-inorganic perovskites because the plasma destroys the perovskite film and thus deteriorates its photophysical properties. Here, we prove that using an appropriate geometry of the ALD system (SENTECH SI PEALD system) and suitable process parameters it is possible to coat perovskites with alumina by PEALD. Spectromicroscopy followed by electrical characterisation reveal that as long as the PEALD process is not optimized (too long plasma pulses) one gets degradation of the perovskite as well as dissociation of the created iodine pentoxide (during PEALD) under light that causes a valence band maximum (VBM) shift to the Fermi level and thus significantly decreases the solar cell efficiency. However, once the PEALD process parameters are optimized, no VBM shift is observed. Moreover, the solar cell efficiency depends inversely on process temperature and layer thickness.
During the last decade, the controlled growth of monolayer (MLG) and bilayer graphene has extensively been studied on the hexagonal Ru(0001) surface, which is a system that is known to form strong chemical bonds at the metal-graphene interface. Yet, little attention was paid to the influence of the substrate orientation that was demonstrated to have a significant impact for graphene growth on the Ir(001) and Ir(111) surfaces, the latter exhibiting a weak coupling between the graphene and the support. Therefore, in this study we have grown graphene on the rectangular Ru(10-10) surface by segregation and ethylene-supported chemical vapor deposition. A photoemission and low-energy electron microscope (PEEM & LEEM) has been utilized to directly characterize the MLG growth process with respect to variations in substrate temperature and step orientation. The expansion of the MLG islands is compared to the well-established carpet-growth mode on the Ru(0001) surface. These results have been complemented by probing of the occupied and unoccupied electronic structure of the islands using PEEM and intensity-voltage LEEM. Furthermore, the existence of two preferential surface reconstructions is identified via micro-illumination low-energy electron diffraction (LEED), whose spatial distribution is revealed by employing dark-field LEEM imaging.
Ultrathin NiO films have prospective applications especially in heterogeneous catalysis, microelectronics, and spintronics and are thus an object of active research. The Ag(100) surface is the usual support for these films, as its cubic lattice parameter is only 2.2 % smaller than that of NiO, which enables pseudomorphic growth at very low thicknesses. We have studied the NiO(100) surface for three thicknesses of the oxide: 2 ML on Ag(100), 20 ML on the same substrate, and a bulk single crystal. We have used intensity-voltage low-energy electron diffraction (IV-LEED) in combination with X-ray photoelectron spectroscopy (XPS) and density-functional theory (DFT) calculations. We focus on differences among the three thicknesses, mainly in terms of lattice parameters and surface defects, and our study deepens existing knowledge of the growth of ultrathin NiO films. The IV-LEED calculations have been carried out using the AQuaLEED package, which will also be briefly presented.
The development of novel catalysts for a variety of applications is a key challenge for modern catalysis. Inverse metal oxide catalysts consisting of oxide nanoparticles dispersed on a metal support have recently attracted much attention, showing higher activity and selectivity compared to traditional catalytic systems, harnessing synergistic effects attributed to the so-called metal-support interaction. To gain further insights, we deposited cerium oxide nanoparticles on Au(111) and studied this system by low-energy electron microscopy (LEEM) and low-energy electron diffraction (LEED). The prepared samples demonstrate a distinct correlation between the deposition temperature and the structural order of the nanoparticles. This has been expanded upon by exploring the changes induced by reduction with H2 and reoxidation with O2 or CO2, again exhibiting a connection between structural order and activity, while also showing the influence of the oxide-metal interaction on the stability of cerium oxide under reducing conditions.
WO3 Thin-Film Optical Gas Sensors Based on Gasochromic Effect towards Low Hydrogen Concentrations
(2023)
Hydrogen gas sensors have recently attracted increased interest due to the explosive nature of H2 and its strategic importance in the sustainable global energy system. In this paper, the tungsten oxide thin films deposited by innovative gas impulse magnetron sputtering have been investigated in terms of their response to H2. It was found that the most favourable annealing temperature in terms of sensor response value, as well as response and recovery times, was achieved at 673 K. This annealing process caused a change in the WO3 cross-section morphology from a featureless and homogenous form to a rather columnar one, but still maintaining the same surface homogeneity. In addition to that, the full-phase transition from an amorphous to nanocrystalline form occurred with a crystallite size of 23 nm. It was found that the sensor response to only 25 ppm of H2 was equal to 6.3, which is one of the best results presented in the literature so far of WO3 optical gas sensors based on a gasochromic effect. Moreover, the results of the gasochromic effect were correlated with the changes in the extinction coefficient and the concentration of the free charge carriers, which is also a novel approach to the understanding of the gasochromic phenomenon.
The cleaning process of the bimetallic Pt3Sn(111) surface has been studied by means of low-energy electron microscopy (LEEM), microspot low-energy electron diffraction (-LEED), and X-ray photoemission electron microscopy (XPEEM). Different cleaning procedures, performed under ultra-high vacuum conditions (UHV), including sputtering with argon ions and repeated cycles of annealing up to 1500 K were investigated. In this work, we show that a clean Pt3Sn(111) surface of high structural quality with a sharp and brilliant (2 × 2) bulk reconstruction in LEED as well as a perfectly smooth surface with terraces of micron size can be achieved by sputtering, annealing at very high temperatures, followed by a subsequent slow (0.09 K/s) and careful cooling procedure. Additionally, we show the possibility of tailoring the Sn concentration in the topmost layers of Pt3Sn(111) as a function of annealing temperature and subsequent cooling rate. Structural changes of the surface are induced by Sn segregation combined with a surface order–disorder transition at 1340 K. Moreover, two new surface reconstructions depending on the cooling rate are reported.
We have used low-energy electron microscopy (LEEM), micro-illumination low-energy electron diffraction (µLEED) supported by ab initio calculations, and X-ray absorption spectroscopy (XAS) to investigate in-situ and in real-time the structural properties of Sm2O3 deposits grown on Ru(0001), a rare-earth metal oxide model catalyst. Our results show that samarium oxide grows in a hexagonal A-Sm2O3 phase on Ru(0001), exhibiting a (0001) oriented-top facet and (113) side facets. Upon annealing, a structural transition from the hexagonal to cubic phase occurs, in which the Sm cations exhibit the +3 oxidation state. The unexpected initial growth in the A-Sm2O3 hexagonal phase and its gradual transition to a mixture with cubic C-Sm2O3 showcases the complexity of the system and the critical role of the substrate in the stabilization of the hexagonal phase, which was previously reported only at high pressures and temperatures for bulk samaria. Besides, these results highlight the potential interactions that Sm could have with other catalytic compounds with respect to the here gathered insights on the preparation conditions and the specific compounds with which it interacts.
The most efficient and stable perovskite solar cells (PSCs) are made from a complex mixture of precursors. Typically, to then form a thin film, an extreme oversaturation of the perovskite precursor is initiated to trigger nucleation sites, e.g., by vacuum, an airstream, or a so-called antisolvent. Unfortunately, most oversaturation triggers do not expel the lingering (and highly coordinating) dimethyl sulfoxide (DMSO), which is used as a precursor solvent, from the thin films; this detrimentally affects long-term stability. In this work, (the green) dimethyl sulfide (DMS) is introduced as a novel nucleation trigger for perovskite films combining, uniquely, high coordination and high vapor pressure. This gives DMS a universal scope: DMS replaces other solvents by coordinating more strongly and removes itself once the film formation is finished. To demonstrate this novel coordination chemistry approach, MAPbI3 PSCs are processed, typically dissolved in hard-to-remove (and green) DMSO achieving 21.6% efficiency, among the highest reported efficiencies for this system. To confirm the universality of the strategy, DMS is tested for FAPbI3 as another composition, which shows higher efficiency of 23.5% compared to 20.9% for a device fabricated with chlorobenzene. This work provides a universal strategy to control perovskite crystallization using coordination chemistry, heralding the revival of perovskite compositions with pure DMSO.
Among challenges implicit in the transition to the post–fossil fuel energetic model, the finite amount of resources available for the technological implementation of CO2 revalorizing processes arises as a central issue. The development of fully renewable catalytic systems with easier metal recovery strategies would promote the viability and sustainability of synthetic natural gas production circular routes. Taking Ni and NiFe catalysts supported over γ-Al2O3 oxide as reference materials, this work evaluates the potentiality of Ni and NiFe supported biochar catalysts for CO2 methanation. The development of competitive biochar catalysts was found dependent on the creation of basic sites on the catalyst surface. Displaying lower Turn Over Frequencies than Ni/Al catalyst, the absence of basic sites achieved over Ni/C catalyst was related to the depleted catalyst performances. For NiFe catalysts, analogous Ni5Fe1 alloys were constituted over both alumina and biochar supports. The highest specific activity of the catalyst series, exhibited by the NiFe/C catalyst, was related to the development of surface basic sites along with weaker NiFe–C interactions, which resulted in increased Ni0:NiO surface populations under reaction conditions. In summary, the present work establishes biochar supports as a competitive material to consider within the future low-carbon energetic panorama.
In this work, a switch from n-type to p-type conductivity in electrodeposited Cu3(2,3,6,7,10,11-hexahydroxytriphenylene)2 [Cu3(HHTP2)] has been observed, which is most likely due to oxygen molecular doping. The synthesis of electrically conductive 2D metal–organic frameworks (MOFs) has been achieved through the introduction of highly conjugated organic linkers coordinated to their constituent metal-ion centers. However, the porous structure and unsaturated metal sites in MOFs make them susceptible to ambient adsorbates, which can affect their charge transport properties. This phenomenon has been experimentally investigated by GIXRD, Hall effect and Seebeck measurements, and X-ray photoelectron spectroscopy.
Atomic layer deposition (ALD) has been considered as an efficient method to deposit high quality and uniform thin films of various electron transport materials for perovskite solar cells (PSCs). Here, the effect of deposition sequence in the ALD process of aluminum-doped zinc oxide (AZO) films on the performance and stability of PSCs is investigated. Particularly, the surface of AZO film is terminated by diethylzinc (DEZ)/H2O (AZO-1) or trimethylaluminum (TMA)/H2O pulse (AZO-2), and investigated with surface-sensitive X-ray photoelectron spectroscopy technique. It is observed that AZO-2 significantly enhances the thermal stability of the upcoming methylammonium lead iodide (MAPbI3) layer and facilitates charge transport at the interface as evidenced by photoluminescence spectroscopes and favorable interfacial band alignment. Finally, planar-type PSC with AZO-2 layer exhibits a champion power conversion efficiency of 18.09% with negligible hysteresis and retains 82% of the initial efficiency after aging for 100 h under ambient conditions (relative humidity 40 ± 5%). These results highlight the importance of atomic layer engineering for developing efficient and stable PSCs.
Band Bending at Hole Transporting Layer-Perovskite Interfaces in n-i-p and in p-i-n Architecture
(2022)
Interfaces between hybrid perovskite absorber and its adjacent charge-transporting layers are of high importance for solar cells performance. Understanding their chemical and electronic properties is a key step in designing efficient and stable perovskite solar cells. In this work, the tapered cross-section photoemission spectroscopy (TCS-PES) method is used to study the methylammonium lead iodide (CH3NH3PbI3) (MAPI)-based solar cells in two configurations, that is, in an inverted p–i–n and in a classical n–i–p architecture. It is revealed in the results that the MAPI film deposited once on the n-type TiO2 and once on the p-type NiOx substrates is neither an intrinsic semiconductor nor adapts to the dopant nature of the substrate underneath, but it is heavily n-type doped on both substrates. In addition to that, the TCS-PES results identify that the band bending between the MAPI film and the hole transporting layer (HTL) layer depends on the perovskite solar cells architecture. In particular, a band bending on the HTL side in the n–i–p and at the MAPI in the p–i–n architecture is found. The flat band of NiOx at the NiOx/MAPI interface can be explained by the Fermi level pinning of the NiOx at the interface.
MoS2 is well known for changing from an indirect to a direct band-gap semiconductor as a single layer. Here, for the model system MoS2/Au(111), we present in-situ studies of the continued growth of micron-size single-layer MoS2 islands including the first formation of bilayer patches.
We have used angle-resolved photoemission spectroscopy from micrometer sized regions to investigate the local band structure of the islands’ rims and centers, showing a prevalence for bilayer and single-layer formation at the rims and centers, respectively. The bilayer patches can clearly be identified locally on the few nanometer scale employing intensity-voltage low-energy electron microscopy as a fingerprinting method. Astonishingly, micro-spot low-energy electron diffraction hints toward the nucleation of the second layer of the MoS2 between the single layer MoS2 and the Au(111) substrate when the step bunches formed by the single-terrace growth mechanism become sufficiently high.
In this work we have utilized near-ambient pressure and ultra-high vacuum X-ray photoelectron spectroscopy as well as atomic layer deposition to investigate perovskite solar cells (PSCs). We have demonstrated that ultrathin room temperature atomic layer-deposited aluminium oxide on the perovskite surface very effectively suppresses iodine migration[1] and improves the long term stability and efficiency of PSCs [2,3]. Furthermore, exposure to light proves more detrimental to the perovskite film than exposure to water vapor.[2] Absorbed photons create Frenkel defects in the perovskite crystal and their number strongly depends on the used illumination. The higher the photon flux, the higher the concentration of Frenkel defects, and thus the stronger the degradation of power conversion efficiency and the stronger the hysteresis in the J-V characteristics. [1] C. Das, M. Kot et al., Cell Reports Physical Science 2020, 1, 100112. [2] M. Kot et al., ChemSusChem 2020, 13, 5722. [3] M. Kot et al., ChemSusChem 2018, 11, 3640.
CeOx-Cu inverse catalysts have been shown to convert CO2 into valuable chemicals through catalytic hydrogenation. The catalytic activity may further be enhanced by alloying ceria with trivalent, catalytically active metals, such as Sm, promoting the formation of Ce3+ active sites. In this work, the structural and chemical properties of (111)- and (100)- oriented CeOx islands alloyed with samarium were explored by low-energy electron microscopy and X-ray photoemission electron microscopy. After Sm deposition on the as-grown CeOx islands, the near-surface region of (100)-oriented CeOx is reduced after exposure to H2 at 470 ∘C, whereas the deeper layers as well as the whole (111)-oriented islands retain the Ce4+ state. Subsequent reoxidation with O2 leads to the complete Ce4+ state recovery, suggesting the healing of oxygen vacancies. Additional annealing at 470 ∘C induces samarium diffusion into the ceria matrix. Yet, subsequent exposure to H2 reduces neither the (111)- nor the (100)-oriented CeSmOx islands, suggesting a quite unexpected stability of this system.
The sulfuration of metallic iron layers into pyrite (FeS2) is preceded by an initial stage characterized by the iron transformation into monosulfide, which acts as a precursor of the disulfide. This work presents a comprehensive reaction and kinetic model of the sulfuration reaction of metallic iron thin films into monosulfides when a molecular sulfur (S2) atmosphere is used. By slowing down the sulfuration reaction, we have been able to follow in situ the evolution of the transport properties (electrical resistivity and Seebeck coefficient) of the Fe films during their sulfuration reaction to monosulfides. We show that two different stages characterize this initial sulfuration: (1) the transformation of Fe into hexagonal pyrrhotite (Fe → Fe1–xSH) and (2) a partial crystallographic transformation of this hexagonal pyrrhotite into orthorhombic pyrrhotite (Fe1–xSH → Fe1–xSO). A two-step process can explain the pyrrhotite hexagonal phase formation, being first controlled by the surface adsorption of S2 on the external sample interface (S2/pyrrhotite) and second by the diffusion of Fe atoms through the formed pyrrhotite layer. By deducing the corresponding kinetic equations in terms of the experimental parameters (S2 partial pressure and thicknesses of the layers of present species), we can explain the evolution of the electrical resistance and Seebeck coefficient of the original Fe film during its transformation into monosulfide. At the same time, the appearance of the Kirkendall effect during the monosulfide phase formation is experimental and formally justified. The comprehensive description of this first stage of the complete sulfuration process of the Fe film into pyrite provides a layout to deeply discuss the influence of these intermedium phases on the final iron disulfide film characteristics and the appearance of potential film defects related to the experimental growth conditions.
Submonolayer coverages of V-oxide on Rh(111) condense during catalytic methanol oxidation into a pattern of macroscopic stripes or islands. Under reaction conditions, a phase separation occurs within the VOx islands that has been studied in a pressure range of 10–6–10–4 mbar with photoemission electron microscopy (PEEM), low-energy electron microscopy (LEEM), microspot-low-energy electron diffraction (μLEED), and microspot-X-ray photoelectron spectroscopy (μXPS). An oxidized outer ring with a (√7 × √7)R19.1° structure coexists with an inner (12 × 12) Moiré-type boundary layer and a reduced core exhibiting a (√3 × √3)R30° Moiré type pattern. The dependence of the substructure on the reaction conditions, on V coverage, and on island size was investigated. With μXPS, the V coverages of the different phases in the VOx islands were determined.
The nucleation and growth of single-layer molybdenum disulfide single-domain nanosheets is investigated by in situ low-energy electron microscopy. We study the growth of micrometer-sized flakes and the correlated flattening process of the gold surface for three different elevated temperatures. Furthermore, the influence of surface step edges on the molybdenum disulfide growth process is revealed. We show that both nanosheet and underlying terrace grow simultaneously by pushing the surface step in the expansion process. Our findings point to an optimized growth procedure allowing for step-free, single-domain, single-layer islands of several micrometers in size, which is likely transferable to other transition-metal dichalcogenides (TMDs), offering a very fine degree of control over the TMD nanosheet structure and thickness.
This thesis describes low temperature growth of wide band gap metal oxide thin films deposited by thermal (T-) and plasma-enhanced (PE-) atomic layer deposition (ALD) techniques in which high quality materials are grown with atomic level precision.
Metal oxides are extensively investigated due to their exceptional physical and chemical properties, including relatively wide band gap, high dielectric constant and high thermal stability. This variety of properties results in a wide range of different applications. Thin films of indium oxide (InOx), gallium oxide (GaOx), zinc oxide (ZnOx), and quaternary InOx/GaOx/ZnOx (IGZO), in addition to the well-known aluminum oxide (AlOx), and the catalyst cerium oxide (CeOx), have proven to be superior candidates for many applications; from microelectronics and optoelectronics to gas sensor devices. The demanding requirements of low-temperature deposition processes for thermal sensitive substrates, which include high layer homogeneity and conformality over large areas, makes ALD a pioneer deposition technique. Although many oxides have been grown by TALD and PEALD, the deposition of wide band gap oxides at low temperatures are rarely reported and/or being investigated.
In this work, the deposition method of the individual binary oxide films and combining the respective binary processes into the developed super-cycle growth of quaternary compound have been investigated at relatively low-temperatures by TALD and PEALD. Besides, the growth characteristics and chemical properties of the deposited films were evaluated by in-situ and ex-situ characterization techniques such as spectroscopic ellipsometry (SE) and X-ray photoelectron spectroscopy (XPS), where the influence of ALD process parameters on the growth mechanism and films composition are discussed in detail for any potential applications.
Cerium oxide (CeOx) is of special interest due to its catalytic activity and various other electronic and optical applications. The inverse model catalyst CeOx on Cu(111) has a high activity for methanol synthesis from H2 and CO2. For the activation of CO2, Ce3+ sites have to be present at the surface, which means that the CeOx has to be reduced to some extent. This may be achieved by exposure to H2 at elevated temperatures. We studied the interaction of H2 and CO2 with CeOx islands on Cu(111) with low-energy electron microscopy (LEEM) and X-ray absorption spectroscopy (XAS). From earlier studies, the orientation of the CeOx is known to be decisive for its catalytic activity. In our experiments (100) and (111) CeOx islands are grown side by side on the metal substrate, so that identical reaction conditions prevail during the experiment. At a high temperature of 550 ∘C, exposure to H2 leads to partial reduction, and exposure to CO2 leads to reoxidation of the CeOx. The differences observed for the two island orientations regarding structure and composition will be discussed.
An Al2O3/ZnO heterojunction was grown on a Si single crystal substrate by subsequent thermal and plasma-assisted atomic layer deposition (ALD) in situ. The band offsets of the heterointerface were then studied by consecutive removal of the layers by argon sputtering, followed by in situ X-ray photoelectron spectroscopy. The valence band maximum and conduction band minimum of Al2O3 are found to be 1.1 eV below and 2.3 eV above those of ZnO, resulting in a type-I staggered heterojunction. An apparent reduction of ZnO to elemental Zn in the interface region was detected in the Zn 2p core level and Zn L3MM Auger spectra. This suggests an interface formation different from previous models. The reduction of ZnO to Zn in the interface region accompanied by the creation of oxygen vacancies in ZnO results in an upward band bending at the interface. Therefore, this study suggests that interfacial properties such as the band bending as well as the valence and conduction band offsets should be in situ controllable to a certain extent by careful selection of the process parameters.
This investigation provides novel data on the structure and chemical composition of pyrite thin films and new hints concerning their formation mechanism. From TEM-HAADF data, it has been found that the films are composed of two different layers: one is very compact and the other one is quite porous with many voids separating a few groups of grains. This porous layer is always in direct contact with the substrate, and its thickness is quite similar to that of the original Fe film. The average size of pyrite grains is equal in both layers, what suggests that the same process is responsible for their formation. Concentration profiles of sulfur, iron and some impurities (mainly sodium and oxygen from the glass substrate) through both layers are given in this work, and thus chemical inhomogeneities of the films are proved by the obtained stoichiometric ratios (S/Fe). Moreover, Na from sodalime glass substrates mainly accumulates at the pyrite grain boundaries and barely dopes them. The obtained results support the hypothesis that the iron sulfuration process essentially induces the diffusion of iron atoms, what leads to the porous layer formation as a manifestation of the Kirkendall Effect. Therefore, it seems that the same mechanisms that operate in the synthesis of surface hollow structures at the nanoscale are also active in the formation of pyrite thin films ranging from several tens to hundreds of nanometers.
The design and development of intrinsically stretchable all-organic self-powered sensors concurrently perceiving temperature and pressure remain a challenge but deliver an exciting platform to realize environmentally friendly wearable electronics. In this approach, a biomimetic all-organic stretchable energy harvester is designed by a xylitol-added poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS/Xyl) film as a compatible overlay electrode with polyaniline-reinforced one-dimensional aligned poly(vinylidene fluoride) hybrid electroactive soft nanowires. The gradient of elastic modulus between the electrode and the active nanowire component enables the all-organic device to manifest excellent power-generating performance under external temperature fluctuation (∼3 μW/m2 under ΔT ∼ 92 K) and mechanical force (∼31 μW/cm2 at 30 N). Importantly, the device renders simultaneous energy scavenging of temperature and pressure changes under pressing and stretching conditions (∼20%). The excellent mechanosensitivity (∼100 mV/N), fast response time (∼1 ms), outstanding mechanical and thermal stability, and good temperature resolution <10 K enable the harvester to act as an epidermal sensor, which simultaneously detects and discriminates both subtle pressure and thermal deviations exposed to an epidermis surface. The real-time recording and wireless transferring of physiological signals to a smartphone indicate an effective way to realize remote healthcare monitoring for early intervention.