Refine
Year of publication
Document Type
Way of publication
- Open Access (6)
Keywords
- schweißen (25)
- fügen (23)
- Fügetechnik (18)
- welding (12)
- Simulation (10)
- mechanical properties (8)
- microstructure (6)
- Al – Mg – Si alloy (4)
- Laserstrahlschweißen (4)
- Schweißsimulation (4)
Institute
FE-Welding Simulation and Distorsion Measurement during Welding using optical Object Grating Method
(2005)
Verzugsberechnung einer komplexen Struktur mittels eines analytisch-numerischen Hybridmodells
(2010)
Thermomechanische Simulation geschweißter Mischverbindungen aus Aluminium- und Stahlwerkstoffen
(2011)
Deposition of Ti-6Al-4V using laser and wire, part I: Microstructural properties of single beads
(2011)
Deposition of Ti-6Al-4V using laser and wire, part II: Hardness and dimensions of single beads
(2011)
The paper presents a numerical and experimental approach for the quantification of the thermo-mechanical properties in multi-pass weld’s heat affected zone (HAZ) of low alloy steel “S355J2+N”. First, the characteristic temperature cycles for multi-pass welds were identified by FE temperature field simulations of welding. Based on the identified temperature cycles, the microstructure in the HAZ has been physically simulated with the simulation and testing system Gleeble 3500 to investigate the influence of multi thermal exposure on the thermo-mechanical properties. Thus, the thermo-mechanical material properties including thermal strain and temperature dependent stress strain behaviour as function of peak temperatures and cooling rates have been determined. These material properties were used to calibrate a developed model for numerical prediction of the material properties of multi-pass weld HAZ.
Thermal shock behavior of ceramics plays a decisive role in their broad industrial applications. For
enhanced understanding of damage and failure mechanism under thermal shock loading, in the present
work, a combination of experimental testing and numerical simulation methods has been used. The
thermal shock behavior of the alumina (99.7%) disk samples has been investigated by using a plasma
test stand: the bottom of the ceramic disks were locally heated in the center by plasma beam; during the
heat treatment the temperature distribution at the top of the sample was recorded with a thermographic
system. To characterize the thermal shock resistance, a thermomechanical simulation was subsequently
carried out. It calculates the temperature and stress distribution within the ceramic disks. The
calculated critical thermal tension stresses are reported, which led to the failure of the ceramic disks
under thermal shock loading. The effect of the sample thickness on the temperature and stress
distribution is presented. Compared with the experimental results the simulated results show excellent
agreement. As conclusion, it is possible to determine the thermal shock behavior of ceramic materials by
the combination of experimental testing and numerical simulation.
Simulation of Weld Shape, Microstructure, Distortion and Residual Stresses for Laser Beam Welding
(2002)
The purpose of this study is to characterise the corrosion behaviour of zinc-coated sheet metals after a structuring process using the salt spray test. The investigated structured material is manufactured by hydroforming and has a periodic hexagonal geometry. The corrosion behaviour has been evaluated by estimating the development of the corrosion area and penetration depth. The results of the investigation show that the corrosion area is larger on the smooth sheet than on the structured sheet. The difference between the structured and smooth sheets is negligible with increasing exposure time. Furthermore, the reasons for the different corrosion behaviours are discussed.
Erweiterung der numerischen Schweißsimulation zur Untersuchung metallkundlicher Fragestellungen
(2001)
Cold cracks in welds are the result of the formation of brittle microstructure as martensite in the presence of diffusible hydrogen as well as of tensile stresses. Cold cracks occur when the combination of cold crack influence parameters (CCIP) overcomes a critical limit. In this study, critical combinations of CCIP were identified with an enhanced test procedure under welding conditions. The test is based on the physical simulation technique of heat affected zone (HAZ) and it is carried out using the test and simulation center Gleeble 3500. Thereby, laboratory special specimens are charged with hydrogen from pure hydrogen atmosphere in the initial stage of the test. Rigidly restraint specimen section is subjected to different weld temperature cycles. Through the thermal exposure, the desired microstructure of HAZ is set in the test zone of the restraint specimen section. A plastic deformation takes place owing to the prevented expansion during heating and contraction of the specimen during cooling. Consequently, compressive or tensile reactions stresses arise in the deformed zone. Cracked specimen represents a critical combination of the CCIP. The quantitative cold crack criterion separates the cold crack susceptible combinations from those non susceptible.