Refine
Document Type
Language
- English (7)
Keywords
- LC/MS (3)
- Phosphonates (3)
- Photolysis (2)
- Actinometry (1)
- DTPMP (1)
- Ferrous ion (1)
- HDTMP (1)
- Hydrogen peroxide (1)
- LPBF-Process, Local Properties, Plane-Strain-Compression-Test (1)
- Manganese (1)
Institute
DTPMP is predominantly utilized as scale inhibitor. We investigated the reaction rates and degradation mechanism of DTPMP with and without addition of Fe²⁺, Mg²⁺ and Ca²⁺ by performing LC/MS and ³¹P-NMR analyses. DTPMP undergoes conversion with and without addition of bivalent metal ions. The initial cleavage of DTPMP is initiated at the C-N bond leading to release of IDMP as its major breakdown product. The release of smaller quantities of EABMP and AMPA confirmed the nucleophilic attack on the DTPMP amines. Oxidation of Fe²⁺ to Fe³⁺ during the initial 30 min indicated an intramolecular electron transfer changing the electron density distribution at the nitrogen centre, which increased the radical attack during UV irradiation. Independent of the fact that Fe acted as catalyst and Mg²⁺ and Ca²⁺ acted as reactants, we found no significant differences in their degradation mechanisms. However, the reaction rates were strongly affected by the addition of the bivalent metal ions as Fe²⁺ accelerated most DTPMP degradation followed by Mg²⁺ and Ca²⁺. The UV treatment without metal ion addition was four times slower compared with Fe²⁺ addition. We conclude that in environments rich in ferrous iron and/or at reduced redox potential, photolysis of DTPMP will be catalysed by iron and will lead to accumulation of IDMP, EABMP and AMPA and several other none-quantifiable breakdown products.
Aminophosphonates are commonly utilised for complexing bivalent ions such as calcium and magnesium. With regard to environmental samples, the analysis of these highly polar compounds is still challenging due to matrix effects and lacking analytical standard methods. We have recently developed a LC/MS method for common aminophosphonates without derivatisation. This LC/MS method delivers precise and accurate measurement for standard samples with very low concentration of cations disturbing the analysis. However, due to matrix effects this LC/MS method requires a sample clean-up being also applicable to natural water or wastewater samples.
We developed and optimised a sample clean-up procedure applying strong cation exchange resin Dowex 50WX8. This clean-up allows a single LC/MS analysis of hydroxyethelidene(diphosphonic acid) (HEDP), aminotris(methylenephosphonic acid) (ATMP), ethylenediaminetetra(methyloenephosphonic acid) (EDTMP), diethylenetriaminepenta(methylenephosphonic acid) (DTPMP) and its major intermediates amino(methylphosphonic acid) (AMPA) and iminodi(methylenephosphonic acid) (IDMP). We compared different test conditions with six aminophosphonates in either ultra pure water or tap water. The latter was used to simulate cation concentrations typical for natural waters.
To elute all aminophosphonate including AMPA, ammonium acetate addition was necessary. The addition of ammonium acetate was combinable with all tested aminophosphonates and provides high sample quality for LC/MS analysis. For acceptable recovery, the smallest aminophosphonate AMPA required the highest addition of ammonium acetate (1000 mg L-1) during the sample clean-up. Finally, the optimised clean-up procedure was successfully applied to identify and quantify phosphonates from an industrial wastewater sample. The sample clean-up procedure is simple, cheap, rapid and precise and can be further combined with solid phase extraction and more sensitive LC/MS methods.
Photodegradation of aminophosphonates such as ethylenediaminetetra(methylenephosphonic acid) (EDTMP) is recently assumed being the major degradation pathway in aquatic environments. Several photolysis studies were reported about EDTMP and possible breakdown products occurring in natural ecosystems. Reliable prediction of environmental photolysis of parent compounds and possible release of breakdown products requires different
set-up conditions and varying the parameters influencing the photodegradation. We studied the influence of three different system configurations during UV degradation of EDTMP. These three configurations differed either in geometry and/or treated sample volumes. System 1 was equipped with a direct cooling jacket at the UV lamp. System 2 had the geometry of system 1 but there was no usage of a direct cooling jacket. System 3 was a gas-tight system with a larger sample volume. Using the chemical actinometer potassium ferrioxalate, we determined the highest photon flux for system 3 followed by system 2 and 1. In addition, we performed scavenger experiments with methanol and ascorbic acid in order to prove the dominating radical species. In system 1, the addition of methanol showed almost no effect while the ascorbic acid resulted in a reduction of 57.1% orthophosphate released. Therefore we conclude that in system 1 the radical-drive degradation of EDTMP is mainly
based on superoxide radicals. In system 2 and 3 both radical species, i.e., hydroxyl radicals and superoxide radicals, contribute to the photodegradation of EDTMP. We determined different half-lives for EDTMP for the three different systems configurations. For system 1, the estimated half-life achieved was 14.09 ± 0.15 min. For
system 2 and 3, the half-lives were almost similar and averaged 4.75 ± 0.05 min and 5.02 ± 0.20 min, respectively. Contrary to our assumption to also find the highest degradation rate for system 3, we found the highest degradation rate for system configuration 2 as a result of the differences in the construction and geometry
of the three systems. Our findings lead us to recommend the three system configuration for different research purposes. Thus, we recommend system 1 for detailed studies on the degradation pathway of the parent compound and their breakdown products. System 2 is recommended as a suitable configuration for kinetic studies of the parent compound. And finally, we recommend the system configuration 3 for complete mass balances. The gas-tight system allows determining all soluble and gaseous compounds.
Aminophosphonates such as hexamethylenediaminetreta(methylene phosphonic acid) (HDTMP) are categorised as persistent substances. They are commonly used as scale inhibitors in cooling water systems and desalination processes. After utilisation, they are often discharged into aquatic environment without pre-treatment. Advanced oxidation processes (AOP) are promising pre-treatments for industrial wastewater treatments. We investigated the photodegradation of HDTMP with or without addition of
manganese (Mn2þ) and/or H2O2. Similar to results of our former photodegradation studies, we found that HDTMP also undergoes conversion with or without additives during the ultra violet (UV) irradiation. The reaction rate was most affected by the addition of H2O2, i.e. the HDTMP degradation was accelerated
by a factor 3.85 compared with UV treatment without additives. The addition of Mn2þ accelerated the degradation of HDTMP only by a factor 1.53 compared with the UV treatment without additives. The combined addition of Mn2þ and H2O2 accelerated the HDTMP degradation by a factor 2.81. Interestingly, the initial cleavage is not initiated as expected at the CeN bond but at the CeP bond of the methyl carbon and the phosphorus of the methylenephosphonic acid group of HDTMP. This initial
cleavage was independent whether the UV treatment was performed with or without additives. Therefore, we conclude that the degradation mechanism is similar independent of the four tested
treatment conditions. We identified amino(methylenephosphonic acid) AMPA, dimethylamino(methylenephosphonic acid) DAMP and iminodi(methylenephosphonic acid) IDMP as the major breakdown
products by performing LC/MS analyses. The major mineralisation products were ortho-phosphate, ammonium and carbon dioxide. The mass balances of unknown breakdown products
Today, nanotechnologies (NTs) are well established in both private households and commercial markets. NTs are fully accepted in several sectors, such as medicine and pharmacy, and in industries, such as chemistry, electricity, food production, military, and other commercial branches, due to their unique properties. With regard to the growing demands for environmental resources caused by the still-growing global population, the application of NTs is an extremely important new branch in the environmental sector, delivering several advantages. Our review provides a comprehensive overview of the current developments in environmental remediation, wastewater treatment, drinking water treatment, and agriculture. More specifically, in the section on environmental remediation, we review the application of NTs towards enhanced reductive dechlorination, removal of heavy metals and remediation of oil spills. In the section on wastewater treatment, we highlight developments in the adsorption of heavy metals and persistent substances, advanced photocatalytic
degradation of common wastewater pollutants, and improvements in membrane filtration processes.
In the section on drinking water treatment, we discuss applications for the enhanced disinfection of pathogens, removal of heavy metals, point-of-use treatments, and the removal of organic matter. In the final section, on agriculture, we provide an overview of precision farming and the current state of the art concerning nanofertilisers, nanopesticides, nanoherbicides, and nano(bio)sensors.
Sunlight Degradation of the Aminophosphonate Diethylenetriamine Penta-(Methylenephosphonic Acid)
(2022)
Aminophosphonate diethylenetriamine penta(methylenephosphonic acid) (DTPMP) is a scale inhibitor commonly used in several industries. DTPMP is suspected to cause anthropogenic pollution through discharge into the aquatic environment. DTPMP is assumed to be degraded by
sunlight radiation. We recently predicted a preliminary degradation pathway of DTPMP applyingUV treatment. Currently, we have not yet evidenced that DTPMP shows the same degradation pattern with natural sunlight. One major reason leads to the fact that the light spectrum emitted by UV lamps does not completely represent the natural sunlight spectrum, and the emitted UVB and UVA irradiation flux is much higher than for solar light. For that reason, the degradation pattern and kinetics might be different between artificial UV treatment and natural sunlight treatment. Here, we investigated whether DTPMP is degradable under natural sunlight radiation, and whether
the degradation mechanisms determined through UV treatment are transferable to sunlight. We investigated five different treatment conditions, i.e., DTPMP degradation in direct or diffuse sunlight,
in diffuse sunlight with addition of Ca2+ or Mg2+, and in diffuse sunlight with local TW. Our experiment was carried out from March 2021 to October 2021. We performed LC/MS analyses and measured the release of o-PO4 3 . DTPMP was degraded with all five treatment conditions. The fastest DTPMP degradation occurred in direct and diffuse sunlight without addition of bivalent cations. The addition of Ca2+ and Mg2+ resulted in inhibited degradation. Similar effects occurred for sunlight treatment with local TW. We evidenced different degradation mechanisms for DTPMP depending on the presence of alkaline earth metals as we previously proposed for UV-treated DTPMP. However,
both degradation mechanisms of DTPMP belong to the same degradation pathway determined with UV treatment. Therefore, we conclude that DTPMP undergoes a similar degradation pathway in sunlight as compared to UV light.