Refine
Document Type
Language
- English (6)
Keywords
- Adsorption (3)
- Adsorption modeling (1)
- Alumina (1)
- Austenization (1)
- Dehydrated/rehydrated kaolin (1)
- Grain Refinement (1)
- Grain Size (1)
- Hardness (1)
- Heterogeneity (1)
- Hydrophilic-Hydrophobic Balance (1)
Institute
The recovery of surfactants from organic mediums is of great economic and environmental interests in the field of petrochemicals sector. The aim of this study was to recover poly-dispersed nonionic surfactant (TX-100) from organic medium by the use of dehydrated and rehydrated kaolin. It was found that the presence of water after kaolin rehydration decreases considerably the amount of TX-100 adsorption from 28.7 μmol.g−1 onto dehydrated kaolin to 23.4 μmol.g−1 onto rehydrated kaolin. The estimation of the number of statistical layers of water deposited on kaolin was observed to be about 7 to 9. The effect of type of solvents (heptane, cyclohexane and benzene) on the adsorption onto rehydrated kaolin revealed a reduction in the adsorbed quantity; the adsorbed amounts were found to be 28.7 μmol.g−1, 26.7 μmol.g−1 and 24.2 μmol.g−1 in heptane, cycloheptane and benzene phases, respectively. On the other hand, it was observed that a temperature increased from 20 °C to 35 °C and 45 °C negatively affects the adsorption of TX-100 onto dehydrated and/or hydrated kaolin in heptane medium.
Aiming to develop alloys with better properties for orthopedic applications, the focus of the present research was to evaluate the effect of Mo at.% content on structural, mechanical, and tribological properties of hot isostatically pressed Ti-xMo (x = 4, 8, 12, 15, and 20 at.%) alloys. The structural evolution, mechanical properties, and tribological behavior of the nanostructured Ti-xMo alloys were evaluated using x-ray diffraction, scanning electron microscope, and ball-on-disk tribometer. Wear tests were conducted under different applied loads of 2, 8, and 16 N. Experimental results indicated that the structural evolution and morphological changes of the milled alloys were sensitive to their molybdenum (Mo) content. The morphological characterization showed that the crystallite size and the particle size decreased with increasing Mo content (at.%) reaching the lowest values of 27 and 26 nm in the case of Ti-15Mo and Ti-20Mo, respectively. On the other hand, the coefficient of friction and wear rates were found to be decreasing with increasing Mo content.
The hydrophilic-hydrophobic surface area of alumina powder (Al₂O₃) oxidized at different temperatures was determined on the base of adsorption of water and butane vapor at 25°C. In the order to study the influence of thermal oxidation upon hydrophilic/hydrophobic character of the surface, samples of Al₂O₃ were characterized using granulometry, SEM and BET surface area measurement. SEM results showed that the thermal treatment does not affect the morphology of the Alunima. However, the increase of treatment temperature from 250 to 900°C results in changing of the hydrophilic-hydrophobic balance of Al₂O₃ surface.
Surfactants are widely used in many chemical industries and as primary components of cleaning detergents due to their specific characteristics, which in turn results in high pollution of domestic and industrial wastewaters by such substances. In this study, the mechanistic pathways of the adsorption of cationic benzyl-dimethyl-dodecyl ammonium bromide (BDDAB) and anionic sodium dodecyl sulfate (SDS) surfactants on kaolinite clay in water were investigated. The results showed that the adsorption of anionic surfactant (SDS) on kaolinite is better compared with cationic surfactant (BDDAB), wherein the ♦maximum adsorption capacity was found 161.4 μmol g−1 and 234 μmol g−1 for BDDAB and SDS, respectively. Adsorption kinetics were the best suited to pseudo-second-order model for both BDDAB and SDS with an adsorption rate constant of 0.028 g μmol−1 min−1 and 0.023 g μmol−1 min−1, respectively. Meanwhile, the adsorption of BDDAB by kaolinite showed that the isotherm adsorption tended to follow the Langmuir-Freundlich and Freundlich isotherm models. However, the SDS adsorption isotherm obeyed only the Langmuir-Freundlich model.
The aim of this study was to investigate the influence of thermo-cyclic treatments on the mechanical characteristics (Hardness and Resilience) of low-alloy 42CD4 steel. Thermocyclic treatment on 42CD4 steel was operated for four cycles at 850 °C for 30 min. After each cycle, the steel sample was cooled in different medium (open air and water) in order to check the effect of the cooling rate on the microstructure characteristics. It was found that the cooling rate can affect the mechanical characteristics of the steel. The hardness values of steel cooled in water were higher than those of steel cooled in air. Additionally, there was an increase in the resilience of steel sample with the increase of thermocyclic number.
The effect of sintering temperature (1073–1373 K) on the structural and tribological properties of nanostructured ball-milled β-type Ti–15Mo samples was investigated. The prepared samples were characterized using various apperatus such as X-ray diffractometer, scanning electron microscope (SEM) and ball-on-plate type oscillating tribometer. Wear tests were conducted under different applied loads (2, 8 and 16 N). Structural results showed that the mean pore and crystallite size continuously decreased with increasing sintering temperature to reach the lowest values of 4 nm and 29 nm at 1373 K, respectively. The relative density of the sintered sample at 1373 K was as high as 97.0%. Moreover, a higher sintering temperature resulted in higher relative density, greater hardness and elastic modulus of the sample. It was observed that both the friction coefficient and wear rate were lower in the sample sintered at 1373 K which was attributed to the closed porosity.