Refine
Year of publication
Document Type
Way of publication
- Open Access (5)
Keywords
- schweißen (13)
- fügen (12)
- Fügetechnik (8)
- Simulation (8)
- welding (5)
- Verzug (3)
- mechanical properties (3)
- model (3)
- simulieren (3)
- Al4043 (2)
Institute
Thermal shock behavior of ceramics plays a decisive role in their broad industrial applications. For
enhanced understanding of damage and failure mechanism under thermal shock loading, in the present
work, a combination of experimental testing and numerical simulation methods has been used. The
thermal shock behavior of the alumina (99.7%) disk samples has been investigated by using a plasma
test stand: the bottom of the ceramic disks were locally heated in the center by plasma beam; during the
heat treatment the temperature distribution at the top of the sample was recorded with a thermographic
system. To characterize the thermal shock resistance, a thermomechanical simulation was subsequently
carried out. It calculates the temperature and stress distribution within the ceramic disks. The
calculated critical thermal tension stresses are reported, which led to the failure of the ceramic disks
under thermal shock loading. The effect of the sample thickness on the temperature and stress
distribution is presented. Compared with the experimental results the simulated results show excellent
agreement. As conclusion, it is possible to determine the thermal shock behavior of ceramic materials by
the combination of experimental testing and numerical simulation.
Die vorliegende Arbeit stellt das von Professor Michailov vorgeschlagene Spitzentemperatur-Austenitisierungs-
Abkühlzeit-Modell für die thermomechanische Schweißsimulation unter Berücksichtigung der Gefügeumwandlungen vor. Das Modell erfasst die für die Gefügeausbildung maßgebenden Temperaturzyklen durch seine drei so genannten STAAZ-Parameter: Spitzentemperatur, Austenitisierungs- und Abkühlzeit. Die Korrelation dieser Temperaturzyklusparameter mit den thermomechanischen gefügeabhängigen Werkstoffeigenschaften erfolgt auf Grundlage einer empirischen Datenbasis. Mit der vorgenommenen Erweiterung zu Mehrmalig-(M-)STAAZ lässt sich das aus einem vorgelagerten Temperaturzyklus entstandene Zwischengefüge berücksichtigen.
The work deals with the elastic-plastic thermo-mechanical deformation process after spot heating of large thin plates. It promotes a new theoretical model of the process. The main target is to clarify the kinetics of the plastic strain formation during thermal straightening and to explore the main interactions. For this purpose, a simplified mechanical problem is formulated and applied. As a result, definite thermo-mechanical relations between temperature, initial strain, and accumulated plastic strain are obtained. Finally, a verification study is presented and discussed. The results contribute to extending the knowledge about the process and to establishing a theoretical background for development of applied analytical or analytical-numerical approaches for practical use in the designing and planning phases in welding production. An application to a particular case is described in an accompanying paper (part 2).