Refine
Document Type
Keywords
Institute
BTU
Die hier vorgestellte Forschungsarbeit beschäftigt sich mit der Rekonstruktion der Landschafts- und Umweltgeschichte mithilfe Geographischer Informationssysteme (GIS) und historischer Karten. In einem Modell sollen die räumliche Dimension der Köhlerei, der damit verbundene Holzverbrauch, der Zustand der Wälder, die vorhandene Infrastruktur etc. errechnet und dargestellt werden. Zeitlicher Schwerpunkt ist die zweite Hälfte des 18. Jahrhunderts und die Mitte des 19. Jahrhunderts.
Analysing the spatial distribution of anthropogenic relief structures can contribute to the understanding of past landuse systems. With automated mapping routines, small relief forms can be detected efficiently from high-resolution digital terrain models (DTMs). In this study, we describe an approach for the automated mapping of charcoal kiln sites from an airborne laser-scanning DTM. The study site is located north of Cottbus, Germany, where an exceptionally large historic charcoal production field has been documented in previous archaeological surveys. The goal of this study was to implement, evaluate and improve an automated GIS-based routine for mapping these features based on the template-matching principle. In addition to the DTM, different morphometric variables were evaluated for their suitability to detect kiln sites. The mapping results were validated against a comprehensive database of kiln sites recorded from archaeological excavations and via manual digitization. The effects of irregular kiln-site geometry and DTM noise were evaluated using synthetic DTMs. The results of the synthetic DTM mapping show that the template-matching results differed depending on the morphometric variable used for the mapping process. In accordance with this observation, a validation of the mapping procedure for the field site suggests that feature mapping can be improved. In particular, the number of false detections can be reduced using a combination of morphometric variables. For the validation area, the kiln sites with diameters of at least 10m were mapped using the automated routine, with detection rates that were close to those of manual digitization. Therefore, the described method can considerably facilitate the mapping and distribution analysis of kiln sites or similar small relief forms that are prominent in a specific landscape.
This study outlines the opportunities to reconstruct Holocene landscape dynamics in active opencast lignite mines in southern Brandenburg (Germany). Studies on extensive outcrops that address geomorphology, pedology and archaeology provide unique insights into human-induced environmental changes. Our approach uses a variety of traditional and cutting-edge techniques to characterize small-scale landforms (high-resolution DEMs by micro-drone and LiDAR), to analyze soils and substrate properties in the field (GPR, ERT, geomagnetics, Field Portable XRF and XRD) and to provide chronological information (OSL, 14C, tree-ring dating). This approach is combined with a GIS for data integration. We present the most recent results and review important findings from the last several years. Studies conducted in the opencast mines focus on soil development and Late
Quaternary geomorphodynamics and as well as past land use and the legacy of agriculture and woodland use.
Our results regarding the human-induced geomorphodynamics are similar to those in other regions in Central Europe, but we also observe regional differences caused by the local setting, e.g., intensification of soil erosion coinciding with the expansion of farming of cultivated lands in the Slavic Middle Ages. By analyzing LiDAR data the largest area of historical charcoal production in the Northern European Lowland (NEL) has been revealed. We are clearly only beginning to understand the massive dimensions of charcoal production in the region and the impact on late Holocene geomorphodynamics. The usage of new high-resolution imagery is essential to identify small-scale anthropogenic landforms hidden in the landscape. Future work will consist of developing and improving our integrative approach. However, comprehensive ground truth data provided by the archaeological prospections in the open-cast mines are an excellent basis for GIS-based analyses of high-resolution ALS data and geomorphological research.
In the forefield of the open-cast mine Jänschwalde (north of Cottbus, Germany), archaeological excavations have revealed one of the largest charcoal production fields described so far. As remains of the historic charcoal kilns, small mounds of sediment rich in charcoal fragments and ash cover the soil surface. We applied a combination of methods for mapping such kiln relicts across a range of scales, in order to analyze the spatial distribution of kiln sites and to improve the understanding of historic forest use systems. In archaeological excavations in the mine forefield, the geometry of kiln relicts could be studied in high detail. We used a microdrone to record high-resolution photographs of excavation sites for the
documentation of kiln site ground plans and other traces of historic land use. Based on airborne laser
scanning elevation models, kiln site mapping was extended to areas beyond the mine forefield. Manual
digitization from shaded relief maps was used for mapping kiln sites in further woodland areas surrounding an historic ironwork north of Cottbus. An automated mapping approach based on template matching was developed to detect charcoal production fields on a larger scale, and was applied for an area of about 1000 km2up to now.
In archaeological excavations, about 900 kiln sites have been documented on an approximately 17 km2 large area. Excavation documentations and aerial photographs show variations in the kiln site ground plans. By manual digitization from Shaded Relief Maps, more than 5000 kiln sites with diameters up to 29 m were detected in the 32 km2 area of the royal forest Jänschwalder Heide north of Cottbus. First results of mapping for larger areas indicate similar densities, but smaller diameters of kiln sites in other charcoal production fields; and show that charcoal production is a so far underestimated component of the land use history in many areas in the Northern European Lowlands.
The historic production of charcoal is an important component of the late Holocene fire history for many landscapes. Charcoal production can have numerous effects on ecosystems, e.g., through changes in forest area and structure, or through the effects of pyrolysis, charcoal and ash addition to soils. To assess such effects, it is necessary to understand the spatial extent and patterns of historic charcoal production, which has so far hardly been approached for the Northern European Lowlands. In the forefield of the open-cast mine Jänschwalde (north of Cottbus, Germany), archaeological excavations have revealed one of the largest charcoal production fields described so far. For this area, we applied and evaluated different methods for mapping the spatial distribution of charcoal kiln remains. We present methods and results of our work in this exceptionally well-described charcoal production field and of additional studies on kiln site distribution in regions of the Northern European Lowlands. The large-scale excavations in the mine forefield provide exact information on kiln site geometry. Using airborne laser scanning elevation models, the mapping of kiln sites could be extended to areas beyond the mine forefield. To detect kiln sites for larger areas, an automated GIS based mapping routine, based on a combination of morphometric parameters, was developed and evaluated. By manual digitization from Shaded Relief Maps, more than 5000 kiln sites in an area of 32 km2 were detected in the Jänschwalde mine forefield, with 1355 kiln sites that are wider than 12 m. These relatively large kiln sites could be mapped with detection rates that are close to those of manual digitization using the automated routine. First results for different study areas indicate that charcoal production is a so far underestimated component of the land use history in many parts of the Northern European Lowlands.
Seit 2010 untersucht eine interdisziplinäre Forschergruppe der BTU, des BLDAM und des LBGR die Landnutzungsgeschichte sowie die natürliche und anthropogen induzierte Landschaftsentwicklung in der Niederlausitz, Brandenburg. Systematische archäologische Grabungen des BLDAM im Vorfeld der laufenden Tagebaue sind eine wichtige Grundlage für geopedologische Untersuchungen. Die Arbeiten hatten zunächst ihren räumlichen Schwerpunkt in den Braunkohletagebauen nordöstlich von Cottbus (Tgb. Cottbus Nord, Tgb. Jänschwalde) und wurden dann ausgedehnt auf weitere Forstflächen nördlich von Peitz. Wir geben einen Überblick über die wichtigsten Erkenntnisse der letzten Jahre, präsentieren aktuelle Ergebnisse und zeigen zukünftige Forschungsfelder auf.
Im Tagebau Jänschwalde sind zwischenzeitlich mehr als 1000 Relikte von Holzkohlmeilern (HKM) als Zeugen einer intensiven historischen Holznutzung archäologisch dokumentiert. Mit Stand Januar 2016 liegen Dendroalter von 64 HKM vor. Die Alter schwanken zwischen dem ausgehenden 16. Jahrhundert und der Mitte des 19. Jahrhunderts, was in etwa dem Betriebszeitraum des Hüttenwerks in Peitz entspricht. Die Mehrzahl der Meiler datiert auf den Beginn des 18. Jahrhunderts. Weitere Hinterlassenschaften der historischen Landnutzung sind u.a. Wölbäcker und begrabene Ackerböden. Fossile Böden und ehemalige Landoberflächen sind stellenweise mit äolischen Sedimenten überdeckt. 14C- und OSL-Datierungen an diesen Böden und Sedimenten lassen auf eine Intensivierung der äolischen Aktivität zur slawischen Zeit und im Deutschen Mittelalter schließen. Einige Relikte von HKM sind mit Sand überweht worden, und an einer Stelle konnte das Alter dieser äolischen Sedimentation mittels Dendrodatierung des begrabenen Meilers auf1850 oder jünger bestimmt werden. Allerdings stellt dies die Ausnahme dar. Der weitaus größere Teil der HKM-Relikte liegt direkt an der Oberfläche und ist nicht begraben, was auf eine sehr geringe Winderosion in der Neuzeit schließen lässt. Seit 2015 konnte im Rahmen des DFG-Projekts „Räumliche und zeitliche Dimension der historischen Köhlerei im Tauerschen Forst (Niederlausitz, Brandenburg). Ein Beitrag zur Kulturlandschaftsentwicklung des Norddeutschen Tieflands“ (Az RA 1129/3-1; RA 931/6-1) ein weiteres Gebiet mit hoher HKM-Dichte untersucht werden. Erste Auswertungen der LiDAR-Daten ergeben eine Anzahl von 4449 ehemaligen Meilerstandorten im Tauerschen Forst. 26 Meilerstellen sind beprobt, die Dendroalter hierzu sind in Bearbeitung. Ebenfalls in jüngerer Zeit fanden Untersuchungen zur Verbreitung von HKM-Relikten für das gesamte Land Brandenburg statt. Mit Hilfe eines binären Modells wurden Gebiete mit hoher Wahrscheinlichkeit von HKM-Standorten detektiert. Im Rahmen des im November 2016 beginnenden DFG-Projekts „Die historische Köhlerei in Brandenburg - Analyse der räumlichen Dimension und der Effekte auf bodenhydraulische Eigenschaften“ (SCHN 1349/1-1) sollen nun neben der Verbreitung der historischen Köhlerei auch bodenrelevante Auswirkungen beschrieben und bewertet werden.
Various sources provide information about land use history and landscape transformation. For a variety of reasons, the quality of information differs and is often discontinuous or incomplete. In this interdisciplinary study we take advantage of comprehensive archaeological data gathered by large-scale excavations that were necessary because of opencast lignite mining in Lusatia, Brandenburg, Germany. By using a GIS we integrate these archaeological findings with results from archival and literature studies, from historical maps, from landforms and soils as well as from analyses of shaded-relief maps derived from up-to-date LiDAR data. The long-term aim is to develop a palaeoenvironmental model and thus to reconstruct landscape changes caused by human activities. The focus of the study is the Peitz ironwork in SE Brandenburg, which was a large consumer of commodities for about 300 years. During the time it operated, extensive transformations are supposed to have affected the landscape in the vicinity because of wood consumption and especially charcoal production. Digital datasets about forested areas for different timespans reconstructed from historical maps were made available. In combination with dendrochronological dating of charred trees, the spatiotemporal dimension of charcoal kilns was determined. Also, sites of former bog iron ore mining could be identified. Moreover, the different sources contain further information about other forms of land uses such as agriculture, pastoralism and even viticulture. In conclusion we can highlight that the mosaic of past land use systems is different from the modern structure but that major changes in the forests have been retained.
In pre-industrial times, charcoal burning was a common source of energy across Europe. Charcoal production and its related consequences for the upland environment are well known due to historical and palaeoenvironmental research. In recent years, awareness has grown regarding the use of woods in the lowlands for charcoal production. In the last 20 years, a large charcoal-burning field in Lower Lusatia (Brandenburg, North German Lowlands) was discovered by systematic archaeological excavations of the opencast mine of Jänschwalde. However, the excavations are limited to the mine, which only covers a portion of the Jänschwalder Heide and the surrounding forests.
In this paper, we present the results of our study regarding the spatial extension and timing of charcoal production in the Jänschwalder Heide and its surrounding areas. We applied a combined approach using archaeological research results, GIS-analyses of shaded-relief maps (SRMs) and tree-ring dating of selected charcoal kiln remains. Approximately 900 excavated charcoal kiln ground plans were analysed, which provided a solid data basis for our GIS analyses. For an extensive evaluation, we enlarged our study area beyond the limits of the lignite mine. We identified and digitised the remains of the charcoal kilns by creating SRMs from digital elevation models (DEMs) that were based on high-resolution airborne laser scanning data (ALS). The data from the excavated and digitised charcoal kiln remains were analysed in terms of their sizes and spatial distributions. In addition, the dendrochronological ages of 16 selected charcoal kiln remains were determined.
This study shows that charcoal production was more extensive than initially proven by archaeological excavations. The remains of more than 5000 charcoal kilns were detected on the SRMs across an area that was twice as large as the excavated charcoal-burning field. In the Jänschwalder Heide, considerably more charcoal kiln relicts exist compared with the surrounding communal areas. Furthermore, the charcoal kiln remains in the Jänschwalder Heide have larger diameters, suggesting large-scale charcoal production for supplying energy to the nearby ironworks at Peitz. However, the charcoal production on the communal land was most likely for local crafts. The ages of the charcoal kiln remains indicated that charcoal production occurred between the 17th and 19th centuries, corresponding with the main period of charcoal burning. Overall, our study suggested that charcoal production sites are underestimated in the modern landscapes of the North German Lowlands.
Archaeological excavations have revealed more than thousand charcoal kiln remains (CKRs) in the prefield of
the active opencast lignite mine Jänschwalde, situated about 150 km SE of Berlin (SE Brandenburg, Germany).
The charcoal was mainly produced for the ironwork Peitz nearby, which operated from the 16th to the mid-19th
centuries. In a first approach, to estimate the dimension of the charcoal production, CKRs were mapped on
shaded-relief maps (SRMs) derived from high-resolution LiDAR data (Raab et al. 2015). Subsequently, for a selected test area, identified CKRs on the SRMs were compared with archaeologically excavated CKRs in the
field. This survey showed a considerably number of falsely detected sites. Therefore, the data was critically
re-evaluated using additional relief visualisations. Further, we extended the CKR mapping to areas which are not
archaeologically investigated. The study area, the former royal forest district Tauer, consists of two separate areas: the Tauersche Heide (c. 96 km2 area) N of Peitz and the area Jänschwalde (c. 32 km2 area) NE of Peitz. The study area is characterized by a flat topography. Different former and current anthropogenic uses (e.g., military training, solar power plant, forestry measures) have affected the study area, resulting in extensive disturbances of the terrain surface. The revised CKR abundance in the study area Jänschwalde was considerably smaller than the numbers produced by our first approach. Further, the CKR mapping revealed, that a total record of the CKRs is not possible for various reasons. Despite these limitations, a solid database can be provided for a much larger area than before. Basic statistic parameters of the CKR diameters and all comparative statistical tests were calculated using SPSS. To detect underlying spatial relationships in the CKR site distribution, we applied the Getis-Ord Gi* statistic, a method to test for local spatial autocorrelation between neighbouring sites. The test is available as part of the ArcGis 10.1 spatial statistics toolbox. The outcomes are discussed in consideration of our archaeological, archival and dendrochronological research results.
This study outlines the opportunities for geoarchaeological research in active opencast lignite mines in southern Brandenburg (Germany). Studies on extensive outcrops that address both archaeology and soil geomorphology, combined with a geographical information system (GIS) approach, provide unique insights into human-induced environmental changes in Lower Lusatia and generally improve our understanding of landscape dynamics. We present the
most recent results from three case studies and review important findings from the last several years. Studies conducted in opencast mines of Cottbus-Nord and Jänschwalde focus on (i) Late Quaternary geomorphodynamics and soil development and (ii) past land use and the legacy of agriculture and woodland use. Our results are similar to those in other regions in Central Europe, but we also observe regional differences caused by the local setting, e.g. intensification of soil erosion coinciding with the expansion of farming of cultivated lands in the Slavic Middle Ages. Our research reveals the largest archaeologically investigated area of historical charcoal production in the Northern European Lowland (NEL). We are clearly only beginning to understand the massive dimensions of charcoal production in the region.
Automated detection of small-scale anthropogenic relief features from high-resolution ALS-data
(2014)
The former royal forest districts around Peitz (South Brandenburg, Germany) were used to produce charcoal for
the ironwork Peitz (1554 to 1856). More than 800 archaeologically excavated ground plans of charcoal kilns give evidence of the burning activity in the study area “Jänschwalde Heide” which is only a small part of the whole forest district. The study area in the apron of the active lignite mine Jänschwalde comprises the royal forest “Jänschwalder Heide” and the surrounding community forests. Our study approach combines archaeological research, a GIS-based approach (historical maps, airborne laser scanning (ALS) data, etc.) and archival studies.