Refine
Document Type
Keywords
Institute
BTU
Die hier vorgestellte Forschungsarbeit beschäftigt sich mit der Rekonstruktion der Landschafts- und Umweltgeschichte mithilfe Geographischer Informationssysteme (GIS) und historischer Karten. In einem Modell sollen die räumliche Dimension der Köhlerei, der damit verbundene Holzverbrauch, der Zustand der Wälder, die vorhandene Infrastruktur etc. errechnet und dargestellt werden. Zeitlicher Schwerpunkt ist die zweite Hälfte des 18. Jahrhunderts und die Mitte des 19. Jahrhunderts.
Analysing the spatial distribution of anthropogenic relief structures can contribute to the understanding of past landuse systems. With automated mapping routines, small relief forms can be detected efficiently from high-resolution digital terrain models (DTMs). In this study, we describe an approach for the automated mapping of charcoal kiln sites from an airborne laser-scanning DTM. The study site is located north of Cottbus, Germany, where an exceptionally large historic charcoal production field has been documented in previous archaeological surveys. The goal of this study was to implement, evaluate and improve an automated GIS-based routine for mapping these features based on the template-matching principle. In addition to the DTM, different morphometric variables were evaluated for their suitability to detect kiln sites. The mapping results were validated against a comprehensive database of kiln sites recorded from archaeological excavations and via manual digitization. The effects of irregular kiln-site geometry and DTM noise were evaluated using synthetic DTMs. The results of the synthetic DTM mapping show that the template-matching results differed depending on the morphometric variable used for the mapping process. In accordance with this observation, a validation of the mapping procedure for the field site suggests that feature mapping can be improved. In particular, the number of false detections can be reduced using a combination of morphometric variables. For the validation area, the kiln sites with diameters of at least 10m were mapped using the automated routine, with detection rates that were close to those of manual digitization. Therefore, the described method can considerably facilitate the mapping and distribution analysis of kiln sites or similar small relief forms that are prominent in a specific landscape.
This study outlines the opportunities to reconstruct Holocene landscape dynamics in active opencast lignite mines in southern Brandenburg (Germany). Studies on extensive outcrops that address geomorphology, pedology and archaeology provide unique insights into human-induced environmental changes. Our approach uses a variety of traditional and cutting-edge techniques to characterize small-scale landforms (high-resolution DEMs by micro-drone and LiDAR), to analyze soils and substrate properties in the field (GPR, ERT, geomagnetics, Field Portable XRF and XRD) and to provide chronological information (OSL, 14C, tree-ring dating). This approach is combined with a GIS for data integration. We present the most recent results and review important findings from the last several years. Studies conducted in the opencast mines focus on soil development and Late
Quaternary geomorphodynamics and as well as past land use and the legacy of agriculture and woodland use.
Our results regarding the human-induced geomorphodynamics are similar to those in other regions in Central Europe, but we also observe regional differences caused by the local setting, e.g., intensification of soil erosion coinciding with the expansion of farming of cultivated lands in the Slavic Middle Ages. By analyzing LiDAR data the largest area of historical charcoal production in the Northern European Lowland (NEL) has been revealed. We are clearly only beginning to understand the massive dimensions of charcoal production in the region and the impact on late Holocene geomorphodynamics. The usage of new high-resolution imagery is essential to identify small-scale anthropogenic landforms hidden in the landscape. Future work will consist of developing and improving our integrative approach. However, comprehensive ground truth data provided by the archaeological prospections in the open-cast mines are an excellent basis for GIS-based analyses of high-resolution ALS data and geomorphological research.
In the forefield of the open-cast mine Jänschwalde (north of Cottbus, Germany), archaeological excavations have revealed one of the largest charcoal production fields described so far. As remains of the historic charcoal kilns, small mounds of sediment rich in charcoal fragments and ash cover the soil surface. We applied a combination of methods for mapping such kiln relicts across a range of scales, in order to analyze the spatial distribution of kiln sites and to improve the understanding of historic forest use systems. In archaeological excavations in the mine forefield, the geometry of kiln relicts could be studied in high detail. We used a microdrone to record high-resolution photographs of excavation sites for the
documentation of kiln site ground plans and other traces of historic land use. Based on airborne laser
scanning elevation models, kiln site mapping was extended to areas beyond the mine forefield. Manual
digitization from shaded relief maps was used for mapping kiln sites in further woodland areas surrounding an historic ironwork north of Cottbus. An automated mapping approach based on template matching was developed to detect charcoal production fields on a larger scale, and was applied for an area of about 1000 km2up to now.
In archaeological excavations, about 900 kiln sites have been documented on an approximately 17 km2 large area. Excavation documentations and aerial photographs show variations in the kiln site ground plans. By manual digitization from Shaded Relief Maps, more than 5000 kiln sites with diameters up to 29 m were detected in the 32 km2 area of the royal forest Jänschwalder Heide north of Cottbus. First results of mapping for larger areas indicate similar densities, but smaller diameters of kiln sites in other charcoal production fields; and show that charcoal production is a so far underestimated component of the land use history in many areas in the Northern European Lowlands.
The historic production of charcoal is an important component of the late Holocene fire history for many landscapes. Charcoal production can have numerous effects on ecosystems, e.g., through changes in forest area and structure, or through the effects of pyrolysis, charcoal and ash addition to soils. To assess such effects, it is necessary to understand the spatial extent and patterns of historic charcoal production, which has so far hardly been approached for the Northern European Lowlands. In the forefield of the open-cast mine Jänschwalde (north of Cottbus, Germany), archaeological excavations have revealed one of the largest charcoal production fields described so far. For this area, we applied and evaluated different methods for mapping the spatial distribution of charcoal kiln remains. We present methods and results of our work in this exceptionally well-described charcoal production field and of additional studies on kiln site distribution in regions of the Northern European Lowlands. The large-scale excavations in the mine forefield provide exact information on kiln site geometry. Using airborne laser scanning elevation models, the mapping of kiln sites could be extended to areas beyond the mine forefield. To detect kiln sites for larger areas, an automated GIS based mapping routine, based on a combination of morphometric parameters, was developed and evaluated. By manual digitization from Shaded Relief Maps, more than 5000 kiln sites in an area of 32 km2 were detected in the Jänschwalde mine forefield, with 1355 kiln sites that are wider than 12 m. These relatively large kiln sites could be mapped with detection rates that are close to those of manual digitization using the automated routine. First results for different study areas indicate that charcoal production is a so far underestimated component of the land use history in many parts of the Northern European Lowlands.
Seit 2010 untersucht eine interdisziplinäre Forschergruppe der BTU, des BLDAM und des LBGR die Landnutzungsgeschichte sowie die natürliche und anthropogen induzierte Landschaftsentwicklung in der Niederlausitz, Brandenburg. Systematische archäologische Grabungen des BLDAM im Vorfeld der laufenden Tagebaue sind eine wichtige Grundlage für geopedologische Untersuchungen. Die Arbeiten hatten zunächst ihren räumlichen Schwerpunkt in den Braunkohletagebauen nordöstlich von Cottbus (Tgb. Cottbus Nord, Tgb. Jänschwalde) und wurden dann ausgedehnt auf weitere Forstflächen nördlich von Peitz. Wir geben einen Überblick über die wichtigsten Erkenntnisse der letzten Jahre, präsentieren aktuelle Ergebnisse und zeigen zukünftige Forschungsfelder auf.
Im Tagebau Jänschwalde sind zwischenzeitlich mehr als 1000 Relikte von Holzkohlmeilern (HKM) als Zeugen einer intensiven historischen Holznutzung archäologisch dokumentiert. Mit Stand Januar 2016 liegen Dendroalter von 64 HKM vor. Die Alter schwanken zwischen dem ausgehenden 16. Jahrhundert und der Mitte des 19. Jahrhunderts, was in etwa dem Betriebszeitraum des Hüttenwerks in Peitz entspricht. Die Mehrzahl der Meiler datiert auf den Beginn des 18. Jahrhunderts. Weitere Hinterlassenschaften der historischen Landnutzung sind u.a. Wölbäcker und begrabene Ackerböden. Fossile Böden und ehemalige Landoberflächen sind stellenweise mit äolischen Sedimenten überdeckt. 14C- und OSL-Datierungen an diesen Böden und Sedimenten lassen auf eine Intensivierung der äolischen Aktivität zur slawischen Zeit und im Deutschen Mittelalter schließen. Einige Relikte von HKM sind mit Sand überweht worden, und an einer Stelle konnte das Alter dieser äolischen Sedimentation mittels Dendrodatierung des begrabenen Meilers auf1850 oder jünger bestimmt werden. Allerdings stellt dies die Ausnahme dar. Der weitaus größere Teil der HKM-Relikte liegt direkt an der Oberfläche und ist nicht begraben, was auf eine sehr geringe Winderosion in der Neuzeit schließen lässt. Seit 2015 konnte im Rahmen des DFG-Projekts „Räumliche und zeitliche Dimension der historischen Köhlerei im Tauerschen Forst (Niederlausitz, Brandenburg). Ein Beitrag zur Kulturlandschaftsentwicklung des Norddeutschen Tieflands“ (Az RA 1129/3-1; RA 931/6-1) ein weiteres Gebiet mit hoher HKM-Dichte untersucht werden. Erste Auswertungen der LiDAR-Daten ergeben eine Anzahl von 4449 ehemaligen Meilerstandorten im Tauerschen Forst. 26 Meilerstellen sind beprobt, die Dendroalter hierzu sind in Bearbeitung. Ebenfalls in jüngerer Zeit fanden Untersuchungen zur Verbreitung von HKM-Relikten für das gesamte Land Brandenburg statt. Mit Hilfe eines binären Modells wurden Gebiete mit hoher Wahrscheinlichkeit von HKM-Standorten detektiert. Im Rahmen des im November 2016 beginnenden DFG-Projekts „Die historische Köhlerei in Brandenburg - Analyse der räumlichen Dimension und der Effekte auf bodenhydraulische Eigenschaften“ (SCHN 1349/1-1) sollen nun neben der Verbreitung der historischen Köhlerei auch bodenrelevante Auswirkungen beschrieben und bewertet werden.