Refine
Year of publication
Document Type
Keywords
- CO2 (2)
- Catalysis (2)
- XPS (2)
- 3D printing Polyamide 12 (1)
- Al₂O₃ (1)
- Chaboche model (1)
- Co-phthalocyanine (1)
- Forschen und Promovieren (1)
- GTN model (1)
- GaAs (1)
Institute
- FG Angewandte Physik und Halbleiterspektroskopie (13)
- FG ABWL, insbesondere Organisation und Unternehmensführung (1)
- FG Geopedologie und Landschaftsentwicklung (1)
- FG Handlungstheorien und Methoden der Sozialen Arbeit mit den Schwerpunkten Einzelfallhilfe, Gruppen- und Familienarbeit (1)
- FG Qualitätsmanagement (1)
- FG Systeme (1)
- FG Technische Mechanik und Maschinendynamik (1)
- FG Thermische Energietechnik (1)
- FG Ökologie (1)
- Forschungszentrum Landschaftsentwicklung und Bergbaulandschaften (FZLB) (1)
Netzwerk Nagetier-übertragene Pathogene: Monitoring von Hantavirus-Infektionen in Deutschland
(2009)
The Sabatier reaction is a key process in the "power-to-gas" application which is considered to con-tribute to future chemical energy storage systems. In this
contribution we focus on the catalytic active sites of a NiO catalyst supported on SiO2(NiO/SiO2) which is commonly used in the Sabatier reaction. A novel technique for the characterization of the active sites is presented and dis-cussed using thermal desorption spectroscopy at ambient pressure. This analytical tool is operated under reaction conditions and allows element specific measurements during the catalytic process of CO2 reforming towards methane. Beside the desorption experiments, XPS and XAS measurements of pristine and catalytically used samples are performed to determine the influence of the Sabatier reaction conditions on the surface structure of the catalyst.
In this contribution we report on investigations of the electronic structure and composition of regioregular poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) based films by using Near Edge X-Ray Absorption Fine Structure (NEXAFS). The measurements were done at the U49/2-PGM2 beam line of BESSY II, Berlin using TEY (total electron yield) and TFY (total fluorescence yield) detection. The samples were produced by spin casting a mixture of P3HT (dissolved in chloroform) and PCBM (dissolved in chlorobenzene) on ITO (indium tin oxide) coated glass slides. Measurements of pure P3HT and PCBM show all typical excitations, whereas the blended system is a weighted superposition of the related peaks. Analyzing these weighted superposition, we observe in the surface sensitive TEY data an accumulation of P3HT, whereas in the bulk sensitive TFY signal an as expected mixture is found. We also show angular dependent NEXAFS measurements of the P3HT/PCBM blend in order to measure the orientation and distribution of the P3HT polymer. Additionally, we will show a new approach for organic solar cell application by introducing ferroelectric nanoparticles into the mixture.
Deutsch-chinesiche Zusammenarbeit: Kulturelle Eigenarten machen den Unterschied in der Kommunikation
(2019)
The passivation of n-type InP (100) using sulfur in combination with a gadolinium aluminate (GAO) dielectric layer has been studied. Photoluminescence, minority-carrier lifetime, and capacitance−voltage measurements indicate that a (NH4)2S vapor passivation step prior to atomic layer deposition of the oxide effectively lowers the interface state density. Surface and interface chemistry were studied by synchrotron radiation photoemission spectroscopy (SRPES). The effect of ex situ surface passivation after native oxide removal in HCl solution was examined. It was observed that surface reoxidation occurred during (NH4)2S vapor exposure, leading to the formation of Inx(HPO4)y. S was present on the surface as a sulfide in both surface and subsurface sites. After atomic layer deposition of GAO, sulfates were detected in addition to Inx(HPO4)y, which was confirmed by near-edge X-ray absorptionfine structure analysis. The S in the stack was quantified using reference-free grazing incidence X-rayfluorescence
analysis. X-ray absorption spectroscopy showed that Gd was oxidized and present in the 3+ oxidation state, most likely as a phosphate close to the InP interface and possibly mixed with sulfates. Energy-dependent SRPES measurements of Al 2p and Gd 4d core levels, complemented by transmission electron microscopy, further suggest that the dielectric layer was segregated. Valence band measurements confirm the effective passivation of InP, indicating unpinning of the surface Fermi level.
Sacrificial Self-Assembled Monolayers for the Passivation of GaAs(100) Surfaces and Interfaces
(2016)
The use of sacrificial self-assembled monolayers (SAMs) to prepare clean n-type GaAs (100) surfaces without band bending in vacuo is demonstrated. GaAs surface passivation using octadecanethiol SAMs after HCl cleaning is shown to lead to an enhancement of the room-temperature photoluminescence intensity. Synchrotron-radiation photoelectron spectroscopy (SRPES) finds that the interfacial oxide between GaAs and the SAM remains below the detection limit. Evidence for both Ga–S and As–S bonds at the GaAs–thiolate interface is found. The limited thermal stability of the SAM allows the desorption of the alkyl chains by in situ thermal annealing at temperatures above 180 °C, leaving S bonded to Ga behind. The resulting surface contains only a very small amount of O (0.05 ML coverage) and C (about 3% of the SAM remaining) and shows no band bending with the surface Fermi level close to the conduction band. Atomic layer deposition of Al₂O₃ on this surface occurs via the formation of Al–S bonds without introducing any additional band bending. This indicates that the surface preparation of n-type GaAs (100) using sacrificial octadecanethiol SAMs followed by in situ thermal removal provides a route toward GaAs/oxide interfaces without interfacial oxides and without band bending.
The catalytic conversion of CO2is an important component for the reintegration of secondary products like CO2 or H2 into the energy supply. An example is the "power to gas’" concept with a conversion of CO2 into CH4. The CO2 is transferred into a carrier of chemical energy, with the possibility to feed the produced CH4 into the existing network of natural gas. At temperatures of around 350 °C, hydrogenation of CO2 to CH4 is possible by the Sabatier reaction CO2+4H2->CH4+H2O. One prerequisite for efficient kinetics of the Sabatier reaction is the application and optimization of catalysts. The focus of catalyst development is given to their performance under the conditions to be expected in the special application. As
a part of the project Geoenergy-Research (GeoEn), we
address questions related to the catalytic utilization of CO2 produced in the course of the oxyfuel combustion of lignite. In this contribution, we report on the experimental setup in laboratory scale, which enables an advanced characterization of the catalytic performance, including thermodesorption measurements at atmospheric pressure in order to determine the amount of adsorbed CO2 under real conditions. We also show data for activation energies, the catalytic performance as function of temperature and the long time stability of a commercial Ru-based catalyst.