As the issue of pollutant emissions from aviation propulsion escalates, research into alternative powertrains is gaining momentum. Two promising technologies are the Hybrid Electric Propulsion System (HEPS) and Pressure Gain Combustion (PGC). HEPS is expected to reduce pollutant emissions by decreasing fuel consumption, whereas PGC uses detonation in the combustor to increase the thermal efficiency of engines by elevating the total pressure during combustion. This study extensively explores the integration of these two emerging technologies, thoroughly assessing the advantages that arise from their combination. First, the renowned turboprop engine PW127 is benchmarked and modeled using Gasturb software. The model is integrated into Simulink using the T-MATS tool, with HEPS and pressure gain components added to analyze the thermodynamics of various configurations under different pressure gain values and HEPS parameters. The analysis, conducted up to the cruise phase of the baseline aircraft, reveals that applying pressure gain combustion through Rotating Detonation Combustion (RDC) results in a more significant increase in efficiency and decrease in fuel consumption compared to HEPS with conventional gas turbines. However, HEPS helps maintain a more uniform combustor inlet condition and reduces the Turbine Inlet Temperature (TIT) at the takeoff phase, where the highest TIT otherwise occurs. The results suggest that integrating HEPS with PGC can be beneficial in maintaining optimal combustor conditions and mitigating turbine efficiency degradation.
The utilization of hybrid electric propulsion concept in aviation offers a viable solution to address the limitations posed by the relatively low energy density of batteries in fully electric aviation. These hybrid systems enable the aircraft to achieve a significant range while simultaneously minimizing carbon emissions. While the individual components of a Hybrid Electric Propulsion (HEP) system, such as electric motors and batteries, are designed with high efficiency, their integration presents a significant challenge in the realm of thermal management. Designing an efficient system for managing the substantial waste heat generated by heat sources and effectively transferring it to heat sinks during various flight phases is a complex task. This challenge becomes even more critical as the design must adhere to system weight limits and prioritize aviation safety considerations. In this review article, we performed a systematic review of the challenges related to the key elements in a thermal management system. These elements encompass every component or subsystem that contributes to the thermal management of a generic hybrid-electric propulsion system. This includes electric motors and generators, batteries, heat exchangers, power transmission systems, power distribution systems, storages, fuel cells, cooling fluids and pipes, control system, pumps and fans. Following the identification of the challenges, the paper provides a comprehensive summary of the existing solutions that have been offered and pursued by the community to address the challenges. Furthermore, the paper also discusses emerging technologies related to each element, highlighting their potential in overcoming these challenges.
Leading-edge protuberances inspired by humpback whales have been proven to be effective in delaying dynamic stall and post-stall regime of two-dimensional airfoils while causing a performance penalty in the pre-stall regime. Basically, this leading-edge modification acts as a vortex generator to split the separation region over the blade into multiple smaller regions. In this work, different sinusoidal wavy leading shapes are applied to a transonic compressor rotor blade row to evaluate the technique’s effectiveness from a compressor performance point of view. The compressor characteristic maps have been compared to the baseline case, which shows how the compressor pressure ratio and efficiency are affected by the leading-edge modifications. The compressor stability margin has also been studied, and a detailed discussion of the flow over the compressor blades is provided.
Pressure gain combustors (PGCs) have demonstrated significant advantages over conventional combustors in gas turbine engines by increasing the thermal efficiency and reducing the pollution emission level. PGCs use shock waves to transfer energy which contributes to the increase in outlet total pressure. One of the major obstacles in the actual implementation of PGCs in the gas turbine cycle is the exploitation of the highly unsteady flow of the combustor outlet with the downstream turbine. Because of the higher outlet temperature from the PGCs, the turbine blade cooling becomes essential. Due to the highly fluctuating unsteady flow of PGCs, 3D CFD simulation of turbines becomes very expensive. In this work, an alternative approach of using a 1D unsteady Euler model for the turbine is proposed. One of the novel aspects of this paper is to implement the turbine blade cooling in the unsteady 1D Euler model. The main parameters required for the turbine blade cooling are the cooling air mass flow rate, temperature, and pressure. Due to the introduction of coolant flow, the blades are no longer adiabatic and the mass flow rate across the turbine is not constant. Comparing the 1D Euler results against zero-dimensional calculation and 3D CFD approach showed a very good match for both steady and unsteady simulations confirming the applicability of the 1D method.