Refine
Document Type
Keywords
- CO2 methanation (2)
- 316L (1)
- 3D-printing (1)
- CH4 selectivity (1)
- Experiment design (1)
- Fluid guiding elements (1)
- SLM (1)
- Structured catalysts (1)
- Triply periodic minimal surfaces (1)
- grain structure (1)
Institute
The effect of heat treatment at various temperatures (650, 850, 1050, and 1100°C) and dwell times (10 min and 1 h) on the metallurgical and microstructural evolution as well as on the related tensile properties of stainless steel 316L processed by selective laser melting (SLM) has been systematically evaluated. The metallurgical and microstructural features such as defects, stability of the columnar–cellular structure and substructure, second phase particles, and phase transformation imparted by SLM and heat treatment have been discussed. It has been shown that the processing conditions specific to SLM significantly alter the kinetics of phase evolution compared to standard welding techniques which affects the accuracy of the prediction. The influence of these characteristics on tensile properties and hardness was elucidated. It was disclosed that with increasing heat treatment temperature there was a gradual increase in elongation but a decrease in strength related to the dislocation density and the development of the microstructure.
Das pulverbasierte 3D-Metalldrucken ermöglicht die Fertigung von hochkomplexen Integralbauteilen, die als Trägerstruktur für Mikroreaktoren benutzt werden. Nach einer Beschichtung der Struktur mit einem Katalysatormaterial, können diese Mikroreaktoren höchst effizient für die CO2-Methanisierung eingesetzt werden. Durch die additive Fertigung mit dem selektiven Laserstrahlschmelzen (SLM) wurden adaptierte dreidimensionale periodische Gitterstrukturen mit sehr geringen Wandstärken hergestellt. Diese weisen ein sehr günstiges Verhältnis von Oberfläche zu Volumen (TPMS - Triply periodic minimal surface) auf. Des Weiteren zeigen die TPMS-Strukturen vorteilhafte Strömungseigenschaften, die sowohl für die Beschichtung mit dem Katalysator-Material als auch die Durchströmung mit den Reaktionsmedien im Betrieb essentiell sind. So ist es beispielsweise möglich, durch die Variation der Dimension einer TPMS-Struktur die Oberfläche pro Volumeneinheit, den hydraulischen Durchmesser des Reaktors und somit auch den Transportprozess des Fluids deutlich zu verbessern. Diese Faktoren ermöglichen eine effektivere Gas-Katalysator-Reaktion. Im Vergleich zu Mikroreaktorstrukturen aus den traditionellen Herstellungsverfahren liefern die additiv gefertigten Strukturen sowohl eine höhere CO2-Umwandlungsrate als auch eine CH4-Selektivität innerhalb des diffusionskontrollierten Bereichs.
This work presents a comparative study towards the development of efficient micro-reactors based on 3D-printed structures. Thus, the study evaluates the influence of the metal substrate geometry on the performance of structured catalysts for the CO2 methanation reaction. For this purpose, 0.5%Ru–15%Ni/MgAl2O4 catalyst is wash coated over two different micro-monolithic metal substrates: a conventional parallel channel honeycomb structure and a novel 3D-printed structure with a complex gyroid geometry. The effect of the metal substrate geometry is analyzed for several CO2 sources including ideal flue gas atmospheres, the presence of residual CH4 and CO in the flue gas, as well as simulated biogas sources. The advantages of the gyroid-3D complex geometries over the honeycomb structures are shown for all evaluated conditions, providing at the best-case scenario a 14% improvement of CO2 conversion. Moreover, this contribution shows that systematically tailoring geometrical features of structured catalysts becomes an effective strategy to achieve improved catalysts performances independent of the flue gas composition. By enhancing the transport processes and the gas-catalyst interactions, the employed gyroid 3D metal substrates enable boosted CO2 conversions and greater CH4 selectivity within diffusional controlled regimes.
3D-printed structured catalysts for CO2 methanation reaction: Advancing of gyroid-based geometries
(2022)
This work investigates the CO2 methanation rate of structured catalysts by tuning the geometry of 3D-printed metal Fluid Guiding Elements (FGEs) structures based on periodically variable pseudo-gyroid geometries. The enhanced performance showed by the structured catalytic systems is mostly associated with the capability of the
FGEs substrate geometries for efficient heat usages. Thus, variations on the channels diameter resulted in ca. 25% greater CO2 conversions values at intermediate temperature ranges. The highest void fraction evidenced in the best performing catalyst (3D-1) favored the radial heat transfer and resulted in significantly enhanced catalytic activity, achieving close to equilibrium (75%) conversions at 400 ◦C and 120 mL/min. For the 3D-1 catalyst, a mathematical model based on an experimental design was developed thus enabling the estimation of its behavior as a function of temperature, spatial velocity, hydrogen to carbon dioxide (H2/CO2) ratio, and inlet CO2 concentration.
Its optimal operating conditions were established under 3 different scenarios: 1) no restrictions, 2) minimum H2:CO2 ratios, and 3) minimum temperatures and H2/CO2 ratio. For instance, for the lattest scenario, the best CO2 methanation conditions require operating at 431 ◦C, 200 mL/min, H2/CO2 = 3 M ratio, and inlet CO2 concentration = 10 %.