Refine
Document Type
Keywords
- mechanical properties (3)
- Al – Mg – Si alloy (2)
- microstructure (2)
- power and frequency of pulses (2)
- Al-Mg-Si alloy (1)
- Aluminum alloy (1)
- FE-Temperaturfeldsimulation (1)
- Numerical simulation (1)
- Rührreibschweißen (1)
- Wärmequellemodell (1)
Institute
Welded joints of aluminum alloy 6082-T6 formed by the method of pulse friction stir welding are studied. The effect of the power and frequency of the pulses on the microstructure and mechanical properties of the welded joints is determined. Application of an additional pulse during the welding affects the surface quality and the shape of the weld, the distribution of the oxide layer and of particles of the hardening phase, and the grain size in the zone of dynamic recrystallization.
Welded joints of aluminum alloy 6082-T6 formed by the method of impulse friction stir welding are studied. The effect of the power and frequency of the pulses on the microstructure and mechanical properties of the welded joints is determined. Application of an additional pulse during the welding affects the surface quality and the shape of the weld, the distribution of the oxide layer and of particles of the hardening phase, and the grain size in the zone of dynamic recrystallization.
Impulse Friction Stir Welding (IFSW) was utilized to join 6082–T6 alloy plates at various impulse frequencies. A distinctive feature of IFSW is the generation of mechanical impulses that enhances the forging action of the tool, and thereby, alters the weld microstructure. The microstructural evolution in the Stir Zone (SZ) with special focus on the strengthening precipitation behavior, and overall mechanical properties of the IFSW joints have been investigated. It was demonstrated that the strengthening β″ precipitates reprecipitated in the SZ of the IFSW joints during natural aging. In contrast, no precipitates were found in the SZ of the Friction Stir Welding (FSW) weld. Partial reversion of β″ after IFSW is supposed to occur due to more developed subgrain network and higher dislocation density introduced by impulses that accelerated precipitation kinetics. Dynamic recrystallisation was facilitated by impulses resulting in a fine, homogeneous structure. There was no significant difference between the microhardness in the SZ, tensile and yield strength of the FSW and IFSW joints. However, the application of impulses demonstrated the smoothing of the hardness reduction in the transition region at the advancing side. The shift of the fracture location from the Heat-Affected Zone (HAZ) by FSW to the SZ as well as higher elongation of the joints by IFSW of lower frequencies could be related to the grain refinement and the change of the grain orientation.
The series of impulse friction stir welding (IFSW) experiments for aluminum alloy 6082-T6 butt joints was performed to obtain micrographs, tensile and hardness test samples and to receive the validation data for a numerical model of the process. Impulse force and frequency were varied to determine the effect of individual process parameters on microstructure evolution and mechanical properties of the welded butt joints. A three-dimensional model was established to simulate temperature distribution, heat generation and contact state between the tool and the workpiece during IFSW. Based on the numerical simulation, the influence of the impulses on heat input, maximum weld temperatures and contact state was found. The combination of impulse force and frequency effected the grain refinement. The influence of impulses on the elongation and hardness of the welded joints during IFSW were determined.