Refine
Year of publication
Document Type
Way of publication
- Open Access (1)
Keywords
- PVDF (12)
- X-ray photoelectron spectroscopy (10)
- Atomic layer deposition (ALD) (8)
- X-ray photoelectron spectroscopy (XPS) (7)
- Al2O3 (6)
- atomic layer deposition (5)
- ellipsometry (5)
- Al₂O₃ (4)
- Atomic layer deposition (4)
- ceria (4)
- dielectric (4)
- ferroelectric (4)
- resonant photoelectron spectroscopy (4)
- spectroscopic ellipsometry (4)
- atomic layer deposition (ALD) (3)
- defect states (3)
- dielectric properties (3)
- electroactive phase (3)
- high-k (3)
- hydrogen detection (3)
- nanogenerator (3)
- 3C-SiC (2)
- ALD process parameters (2)
- Band scheme (2)
- Cerium oxide (2)
- FTIR (2)
- Fourier Transform Infrared Spectroscopy (FTIR) (2)
- Hafnium oxide (HfO₂) (2)
- Indium oxide (2)
- Intrinsic charges (2)
- Intrinsic defects (2)
- P(VDF/TrFE) (2)
- PE-ALD (2)
- Partial density of states (pDOS) (2)
- Perovskite solar cells (2)
- Plamsa enhanced atomic layer deposition (PEALD) (2)
- Plasma enhanced atomic layer deposition (2)
- Plasma-enhanced atomic layer deposition (2)
- Pr2O3 (2)
- Resonant photoelectron spectroscopy (2)
- Resonant photoelectron spectroscopy (resPES) (2)
- X-Ray photoelectron spectroscopy (XPS) (2)
- X-ray diffraction (XRD) (2)
- XPS (2)
- atomic force microscopy (2)
- capacitance voltage measurements (2)
- capacitance-voltage (2)
- capacitance-voltage (CV) (2)
- current-voltage (2)
- electrical characterization (2)
- in-gap states (2)
- in-situ (2)
- in-situ X-ray photoelectron spectroscopy (2)
- organic (2)
- piezoelectric (2)
- plasma enhanced atomic layer deposition (2)
- self-powered electronics (2)
- semiconductor (2)
- titanium oxynitride (2)
- transistors (2)
- ultrathin (2)
- β-phase (2)
- AION buffer (1)
- ALD (1)
- ALD heterojunction (1)
- Aluminium nitride (1)
- Aluminium oxide (Al₂O₃) (1)
- Aluminum oxide (Al₂O₃) (1)
- Al₂O₃-CH₃NH₃PbI₃ interaction (1)
- Atomic force microscopy (AFM) (1)
- Atomlagenabscheidung (1)
- Atomlagenabscheidung (ALD) (1)
- Biosensorik (1)
- CO oxidation (1)
- Capacitance voltage (CV) (1)
- Ce(III)-complex (1)
- Cooper minimum (1)
- DNA (1)
- Electrical properties (1)
- Ellipsometry (1)
- Exciton (1)
- Feldeffekttransistor (1)
- Ferroelectretic nanogenerator (1)
- Ferroelectric to paraelectric phase transformation (1)
- Field effect transistors (1)
- Field emission scanning electron microscopy (FESEM) (1)
- Field-emission scanning electron microscopy (FESEM) (1)
- HOPG (1)
- Helicobacter pylori (1)
- High amount of electroactive phase (1)
- Hydrogen sensor (1)
- In-gap defect states (1)
- Indium gallium zinc oxide (1)
- Interface potential (1)
- Ionicity (1)
- Ir (1)
- Korrosion (1)
- L-cysteine (1)
- Leakage current (1)
- Ligand-to-metal charge transfer (1)
- Linear Scan Voltametry (1)
- MFIS capacitors (1)
- MFIS, P[VDF/TrFE] (1)
- Mechanical energy harvester (1)
- Nanogenerators (1)
- Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) (1)
- Organic ferroelectric field effect transistor (1)
- P(VDF-HFP) (1)
- P(VDF-TrFE) (1)
- P(VDF-TrFE) copolymer thin film (1)
- P(VDF.HFP) (1)
- Passivierung (1)
- Pd (1)
- Photoelektronenspektroskopie (1)
- Photokathoden (1)
- Plamsa-enhanced atomic layer deposition (1)
- Plamsa-enhanced atomic layer deposition (PEALD) (1)
- Plasma enhanced atomic layer deposition (PEALD) (1)
- Polaron (1)
- Porous ferroelectret material (1)
- Scanning tunneling microscopy (STM) (1)
- Schwingquarzimpedanzspektroskopie (1)
- Self-polarization (1)
- Self-powered electronics (1)
- Si photocathode (1)
- Si photocathodes (1)
- Silizium (1)
- Spectroscopic ellipsometry (1)
- Superior dielectric properties (1)
- Synchrotron-based X-ray photoelectron spectroscopy (1)
- Ti-N contributions (1)
- TiO2 (1)
- Titanium Oxide (TiO₂) (1)
- Titanium dioxide (TiO2) (1)
- Titanium oxide(TiO₂) (1)
- Titanium oxynitrdie (TiON) (1)
- Titanium oxynitride (1)
- Transparent conducting oxide (1)
- UV-emitter (1)
- Valence band maximum (1)
- X-Ray absorption (1)
- X-Ray absorption spectroscopy (1)
- X-Ray diffraction (1)
- X-ray irradiation (1)
- X-ray absorption spectroscopy (1)
- X-ray diffraction (1)
- XAS (1)
- XPS measurement (1)
- Yb 3+ (1)
- ZnO (1)
- all-organic (1)
- aluminium nitride (AlN) (1)
- aluminum oxide (Al₂O₃) (1)
- aminopropyltrimethoxysilane (1)
- band alignement (1)
- band gab (1)
- band offsets (1)
- band scheme (1)
- band-gap narrowing (1)
- biosensors (1)
- bismuth oxide (1)
- breathing sensor (1)
- buffer layer (1)
- capacitance-voltage measurements (1)
- capacitively coupled (1)
- cerium charge transfer complex (1)
- cerium oxidation state (1)
- charge donation and transfer cycles (1)
- chemical vapor deposition (CVD) (1)
- conductance-voltage (1)
- copolymer (1)
- covalent interfaces (1)
- current-voltage (IV) (1)
- defect monitoring (1)
- e-skin sensor (1)
- electrocatalyst (1)
- electronic structure (1)
- electronic structure of CH₃NH₃PbI₃ (1)
- ellispsometry (1)
- energy harvester (1)
- energy harvesting (1)
- energy storage (1)
- excitons (1)
- feFET (1)
- field emission scanning electron microscopy (1)
- film thickness (1)
- fixed oxide charge (1)
- flexible electrode (1)
- frerroelectric (1)
- fullerene (1)
- gallium oxide (Ga2O3) (1)
- gallium oxide (Ga₂O₃) (1)
- gold electrode (1)
- gold nanoislands (1)
- health-care monitoring (1)
- healthcare monitoring (1)
- helicobacter pylori (1)
- heterostructures (1)
- high performance and durability (1)
- high-k organic (1)
- hydrogen evolution reaction (HER) (1)
- in situ thermal FT-IR study (1)
- inductively coupled (1)
- infrared spectroscopy (1)
- insulator (1)
- interface (1)
- interface properties (1)
- interface reaction (1)
- interface state density (1)
- intrinsic defect states (1)
- intrinsic electronic defects (1)
- large bandgap materials (1)
- low pressure chemical vapor deposition (LPCVD) (1)
- low-k (1)
- low-temperature deposition (1)
- low-temperature growth (1)
- materials (1)
- metal (1)
- microscopic (1)
- model of Al2O3–CH3NH3PbI3 interactions (1)
- morphology (1)
- multi-atomic quasi-particles (1)
- nanofibers (1)
- nanogenerators (1)
- nanoparticle doping (1)
- nanoparticles (1)
- nanostructured platinum (1)
- natural piezoelectric material (1)
- near-ambient pressure X-ray photoemission spectroscopy (NAPXPS) (1)
- negative fixe Oxidladungen (1)
- non-volatile (1)
- nucleation delay (1)
- offset (1)
- open circuit potential (1)
- operando (1)
- operando spectroscopic ellipsometry (1)
- organic field effect transistor (1)
- organic piezoelectric nanogenerator (1)
- oxidant choice (1)
- oxidic (1)
- peak decomposition (1)
- permittivity (1)
- perovskite (1)
- photo electron emission microscopy (PEEM) (1)
- photoelectrocatalyst (1)
- photoluminescence (1)
- photosensitivity and rectifier devices (1)
- piezo- and pyro-electric hybrid nanogenerator (1)
- piezoelectric energy harvester (1)
- piezoelectric flexible nanogenerator (1)
- piezoelectric nanofibers (1)
- piezoelectric thin polymer film (1)
- plamsa source (1)
- plasma enhanced atomic layer deposition (PEALD) (1)
- plasma-enhanced atomic layer deposition (PEALD) (1)
- point defects in CH₃NH₃PbI₃ (1)
- polarons (1)
- poly(vinylidenefluoride) (PVDF)/graphene oxide (GO) nanofibers (1)
- polymer (1)
- pyroelectric (1)
- quadrupol mass spectrometry (QMS) (1)
- quantitative π-electron densities (1)
- real-time monitoring (1)
- reducibility (1)
- resonant photoelectron spectroscopy (resPES) (1)
- resonat photoelectron spectroscopy (resPES) (1)
- screening (1)
- self-poling (1)
- sensor (1)
- sensors (1)
- silica (1)
- silsesqiuoxane (1)
- solar cells (1)
- spectrocsopic (1)
- spin-coated (1)
- stability (1)
- structured substrates (1)
- sugar (1)
- surface oxidation (1)
- synchrotron radiation (1)
- synchrotron radiation photoelectron spectroscopy (SR-PES) (1)
- thermal stability (1)
- thin films (1)
- tin oxide (SnO₂) (1)
- titanium oxynitride (1)
- titanium oxide (TiO2) (1)
- transparent conductive oxide (TCO) (1)
- ultraviolet photoelectron spectroscopy (1)
- valence band spectra (1)
- water oxidation (1)
- water splitting (1)
- wearable pressure sensor (1)
- x-ray absorption spectroscopy (1)
- x-ray photoelectron spectroscopy (1)
- zinc oxide (ZnO) (1)
- β-Phase (1)
Institute
Microscopic and spectroscopic characterization of interfaces and dielectric layers for OFET devices
(2009)
Copper oxide (CuO) is an attractive p-type oxide semiconductor with narrow band gap that has intriguing properties such as non-toxicity, chemical stability, electrocatalytic activity, abundant availability and low production cost. Polymeric materials have attracted great interest owing to their high flexibility, light weight, low cost production and high resistance against corrosion. Poly(vinylidene fluoride) (PVDF) is a commonly used piezoelectric polymer due to its excellent flexibility and piezoelectric properties. In this work, we adopted a one-pot synthesis of CuO nanowires by facile and selective chemical etching process of Cu substrate. XPS, XRD, SEM data ascribed the formation of polycrystalline CuO nanowires over the entire Cu surface. It has been observed that the uniformity, shape and size of the nanowires could be conveniently controlled by etching time and etchant concentration. We have also prepared piezoelectric nanogenerator based on the flexible PVDF/CuO composite film, where the traditional electrical poling treatment was avoided. In addition, dielectric properties have been studied to demonstrate the role of interfacial polarization.
Aluminum nitride films prepared by plasma atomic layer deposition using different plasma sources
(2018)
Aluminum nitride (AlN) thin films are promising for versatile applications in optoelectronics, electronics, piezoelectrics, and acoustics due to their remarkable properties such as wide band gap, high dielectric constant, low electrical conductivity, good piezoelectric coefficient and high ultrasonic velocity. We present a comparative study of AlN films grown by plasma-enhanced atomic layer deposition at 350°C silicon wafers in the SENTECH SI ALD LL system using TMA and NH3 where either a capacitively coupled plasma (CCP) or a direct PTSA (planar triple spiral antenna) source was applied. The films were characterized by ellipsometry, XPS and electrical measurements. The layer properties are discussed concerning the varied ALD process parameters. In general, the process using the direct PTSA source delivered films with higher refractive index and better homogeneity over the wafer achieving also higher growth rates per cycle (GPC) in reduced total cycle durations. Films with refractive index in the range of 2.05 and permittivity around 8 could be realized with a GPC of 1.54 Å/cycle.
We study the electronic structure of ultrathin Al₂O₃, HfO₂, and TiO₂ ALD films by resonant photoelectron spectroscopy. We identify intrinsic defects which are responsible for the active sites in interface reactions, for the incorporation of intrinsic charges, and for the formation of local dipole momenta. All of these features determine the surface potentials and the reactivity of the surface of the atomic layer deposition coated systems. We give examples of charges and dipoles in Al₂O₃, on a study of the surface potentials in HfO₂, and relate the intrinsic defects in TiO₂ to their electrochemical relevance.