Refine
Document Type
Keywords
- water splitting (4)
- ambient pressure spectroscopy (2)
- AFM (1)
- Electropolishing (1)
- InP photocathodes (1)
- Mean Free Paths (1)
- Photoelectron spectroscopy (1)
- Porous Si (1)
- Range (1)
- Rh electrocatalysts (1)
Institute
Photoelectrochemical (PEC) cells offer the possibility of carbon-neutral solar fuel production through artificial photosynthesis. The pursued design involves technologically advanced III–V semiconductor absorbers coupled via an interfacial film to an electrocatalyst layer. These systems have been prepared by in situ surface transformations in electrochemical environments. High activity nanostructured electrocatalysts are required for an efficiently operating cell, optimized in their optical and electrical properties. We demonstrate that shadow nanosphere lithography (SNL) is an auspicious tool to systematically create three-dimensional electrocatalyst nanostructures on the semiconductor photoelectrode through controlling their morphology and optical properties. First results are demonstrated by means of the photoelectrochemical production of hydrogen on p-type InP photocathodes where hitherto applied photoelectrodeposition and SNL-deposited Rh electrocatalysts are compared based on their J–V and spectroscopic behavior. We show that smaller polystyrene particle masks achieve higher defect nanostructures of rhodium on the photoelectrode which leads to a higher catalytic activity and larger short circuit currents. Structural analyses including HRSEM and the analysis of the photoelectrode surface composition by using photoelectron spectroscopy support and complement the photoelectrochemical observations. The optical performance is further compared to theoretical models of the nanostructured photoelectrodes on light scattering and propagation.
Long-term space missions require extra-terrestrial production of storable, renewable energy. Hydrogen is ascribed a crucial role for transportation, electrical power and oxygen generation. We demonstrate in a series of drop tower experiments that efficient direct hydrogen production can be realized photoelectrochemically in microgravity environment, providing an alternative route to existing life support technologies for space travel. The photoelectrochemical cell consists of an integrated catalyst-functionalized semiconductor system that generates hydrogen with current densities >15 mA/cm2 in the absence of buoyancy. Conditions are described adverting the resulting formation of ion transport blocking froth layers on the photoelectrodes. The current limiting factors were overcome by controlling the micro- and nanotopography of the Rh electrocatalyst using shadow nanosphere lithography. The behaviour of the applied system in terrestrial and microgravity environment is simulated using a kinetic transport model. Differences observed for varied catalyst topography are elucidated, enabling future photoelectrode designs for use in reduced gravity environments.
The performance of a photoelectrochemical solar cell depends strongly on the electrochemical nature of the semiconductor/electrolyte junction [1]. Operando Ambient Pressure X-ray photoelectron spectroscopy
investigation of semiconductor/liquid junctions provides quantitative understanding of the energy bands in these photoelectrochemical solar cells [2, 3, 4]. We demonstrate how OAP-XPS may be used to determine these relationships for semiconductor/liquid systems. The data can be
analyzed to determine the energy relationship between the electronic energy bands in the semiconductor electrode and the redox levels in the solution. The major conditions for semiconductor-electrolyte contacts including accumulation, depletion, and Fermi-level pinning are observed, and the so-called flat-band energy can be determined. [1]
Science 344 (2014) 1005; [2] Sci Rep 5 (2015) 9788; [3] Ener Sci 8 (2015) 2409; [4] J Electrochem Soc 162 (2016) H1
Photoelectrochemical cells based on semiconductor-liquid interfaces provide a method of converting solar energy to electricity or fuels. Recently, we have demonstrated operational systems that involved stabilized semiconductor-liquid junctions [1]. The electrical and spectroscopic properties of the TiO2/Ni protection layer system have been
investigated in contact with electrolyte solutions [2, 3, 4]. From the response of the photoelectron binding energies to variations in applied potential the energetics of the solid/electrolyte interface are elucidated.
The degree of conductivity depended on the chemical state of the Ni on the TiO2 surface. The combinations of these techniques provide a powerful tool for the investigation of hybrid electrode/solution contacts. [1] Science 344 (2014) 1005; [2] Sci Rep 5 (2015) 9788; [3] Ener & Env Sci 8 (2015) 2409; [4] J Electrochem Soc 162 (2016) H1
Probing the TiO2/Liquid Interface of a Photoelectrochemical Cell by X-Ray Photoelectron Spectroscopy
(2016)
Amorphous TiO2 coatings can stabilize semiconductor photoanodes such as Si, GaAs, and GaP that are otherwise unstable in aqueous media [1]. Using tender X-rays with their substantially increased inelastic mean free scattering length of photoelectrons and using the classical three-electrode potentiostatic arrangement allows one to follow of the influence of the applied potentials on the semiconductor electrode energetics such as band bending and band edge shifts directly [2, 3]. The observed shifts in binding energy with respect to the applied potential have directly revealed rectifying junction behavior on semiconducting samples. Accumulation, depletion and Fermi level pinning were observed. Additionally, the non-linear response of the core level binding energies to changes in the applied electrode potential has revealed the influence of defect-derived electronic states on the Galvani potential across the complete cell. [1] Science 344 (2014) 1005; [2] Sci Rep 5 (2015) 9788; [3] Ener & Env Sci 8 (2015) 2409
Hydrogen fuel cells, being environmental friendly to produce energy, are a technology of future. One of the efficient ways to produce hydrogen is solar driven photocatalysis using semiconducting materials as photo electrodes. The choice of electrodes is a crucial factor and is done on the basis of photo corrosion stability, light absorption efficiency, and photocarrier lifetime. P-type Si can be used as photo cathode to produce H2 by direct photocatalysis. Si cathodes can be used in acidic electrolytes to have efficient photo catalytic activity but they are unstable in alkaline electrolytes. Therefore, to use both Si electrodes in the same electrolyte, their chemical stability should be extended over a wide range of pH. To this purpose we modified the surface of a p-type Si photocathode with very thin films of TiO2 grown by atomic layer deposition (ALD). We found that the modified Si cathode shows an increased photoresponse and a lower onset potential with respect to the pristine surface and an increased stability at various pH values.
The surface condition of electrochemically H-terminated Si is compared with the situation at the first photocurrent maximum in dilute acidic ammonium fluoride solution where the divalent dissolution converts into the four-valence process. The first high spectral-resolution photoelectron spectroscopy data using synchrotron radiation of electrochemically hydrogenated Si are presented. A combined electrochemistry/ultrahigh vacuum surface analysis system, attached to the U 49/2 beamline at the synchrotron Bessy II, is used for photoelectron spectroscopy (PES) of the electrochemically conditioned samples. We analyze the Si 2p, O 1s, and F 1s core levels. A comparison of a density functional theory calculation of the reaction sequence, proposed in the dissolution model of Gerischer and co-workers, with the PES results supports this model. The anodized sample is characterized by a residual H coverage of 0.35 monolayers evidenced by a surface core level shift, Si-OH and Si-Fx species, F-, and a higher oxidized Si species. SiO2 is not found. Even on very well H-terminated surfaces, we find residual Si-OH complexes, fluoride and water. In situ atomic force microscopy shows a roughening with a root mean square roughness parameter of 2.6 nm. %A92003 The Electrochemical Society. All rights reserved.
The initial stages of porous Si formation on Si(111) in dilute ammonium fluoride solution are analysed by photoelectron spectroscopy using synchrotron radiation (SRPES). The PES results in the por-Si formation regime partly support a recent dissolution model. The contribution from the Si 2p surface core level shift shows that 0.35 ML of the surface is still H-terminated after interruption of the conditioning process at the first photocurrent maximum. Two signals shifted in binding energy by 0.8 and 1 eV, respectively, are attributed to reaction intermediates expected from the proposed reaction mechanism and from theoretical calculations using density functional theory (DFT). A distinct roughening is found in in-situ AFM measurements, with a calculated RMS roughness parameter of 2.6 nm.
The oxide of Si(111) formed by electropolishing in dilute ammonium fluoride solution is analysed by photoelectron spectroscopy using synchrotron radiation. The oxidiclayer is about 3.1 nm thick and contains Si-F-x species as well as oxyfluorides. The oxyfluorides are found preferentially at the electropolishing layer surface. SiOHspecies are concentrated at the oxidic film/substrate interface. The full width half maximum of the Si 2p line indicates that the Si/electropolishing oxide interface issmoother than the Si/natural oxide interface.