The present work is a part of a larger experimental campaign which examines the behaviour of various fuels on a swirl stabilized flame burner configuration. Overall, detailed speciation measurements and temperature measurements were combined with optical measurements. The work presented here concerns the part of the experimental campaign which deals with the optical characteristics of the examined flames. The work adds to the growing database of experimental measurements assessing engine-relevant reaction environments which shift from traditional ones in order to meet pollutant emission regulations and efficiency standards. Here, the oxidation of several commonly used fuel and fuel surrogates that are subjected to the addition of a bio-derived fuel additive (dimethyl ether) and emulated exhaust gas recirculation (EGR) is studied in a laboratory-scale swirl …
The aim of this work is to evaluate the influence of the n-heptane/toluene ratio on the reactivity of binary toluene reference fuels (TRFs), through a combined experimental and numerical work. Novel experimental ignition delay time (IDT) data of three binary TRFs of varying n-heptane/toluene ratios have been obtained in a high-pressure shock tube and in a rapid compression machine at conditions relevant to novel engine operation. Measurements have been performed at two pressures (10 and 30 bar), and at three fuel/air equivalence ratios (0.5, 1.0 and 2.0) for TRF mixtures of 50%, 75% and 90% by volume toluene concentration, over the temperature range of 650–1450 K. It was found that, increasing the n-heptane content, led to an increase in reactivity and shorter measured IDTs. Reduced sensitivity to the equivalence ratio was observed at high temperatures, especially for high toluene content mixtures. A …