Refine
Year of publication
Document Type
Way of publication
- Open Access (3)
Keywords
- Mistuning (12)
- Damping (9)
- Blisk (7)
- Turbines (5)
- Blades (4)
- Blisks (4)
- Rotors (4)
- Compressor Blisk (3)
- Compressors (3)
- FEM-Simulation (3)
Institute
BTU
The forced response of the first rotor of an E3E-type high pressure compressor blisk is analyzed with regard to varying mistuning, varying engine order excitations and the consideration of aeroelastic effects. For that purpose, SNM-based reduced order models are used in which the disk remains unchanged while the Young’s modulus of each blade is used to define experimentally adjusted as well as intentional mistuning patterns. The aerodynamic influence coefficient technique is employed to model aeroelastic interactions. Furthermore, based on optimization analyses and depending on the exciting EO and aerodynamic influences it is searched for the worst as well as the best mistuning distributions with respect to the maximum blade displacement. Genetic algorithms using blade stiffness variations as vector of design variables and the maximum blade displacement as objective function are applied. An allowed limit of the blades’ Young’s modulus standard deviation is formulated as secondary condition. In particular, the question is addressed if and how far the aeroelastic impact, mainly causing aerodynamic damping, combined with mistuning can even yield a reduction of the forced response compared to the ideally tuned blisk. It is shown that the strong dependence of the aerodynamic damping on the inter-blade phase angle is the main driver for a possible response attenuation considering the fundamental blade mode. The results of the optimization analyses are compared to the forced response due to real, experimentally determined frequency mistuning as well as intentional mistuning.
Copyright © 2014 by Rolls-Royce Deutschland Ltd & Co KG
A mistuned radial turbine impeller is analyzed with respect to the impact of varying ambient pressures and temperatures as well on frequency response functions and modal damping ratios. Beginning at room conditions, a finite element model of an impeller wheel at rest is updated based on experimentally determined mistuning in terms of blade dominated frequencies. The following numerical forced response analyses yield a maximum blade displacement amplification of 67% compared to the tuned reference. In addition, modal damping ratios are determined in dependence on the ambient pressure ranging from technical vacuum at 1 mbar up to 6000 mbar in a pressure chamber. Shaker excitation and laser Doppler vibrometry response measurement is employed in this context. A linear dependence of modal damping ratios on ambient pressure and a dominating damping contribution of the surrounding air even for higher modes could be proved. Moreover, the experimental determination of frequency response functions (FRF) at technical vacuum yields a better separation of resonance peaks compared to room conditions at 1013 mbar and hence, this data allows for more accurate model-updates in principle. It is proved that numerical models updated regarding mistuning at room conditions are well suited to predict the forced response at arbitrary pressures if measured modal damping ratios at these pressures are considered. Finally, within analyzing the effect of increasing structural temperatures with the surrounding air at 1013 mbar included slightly decreasing resonance frequencies but strongly increasing FRF-amplitudes are determined.
Copyright © 2014 by ASME
This paper describes preparation, execution and evaluation of a comprehensive bladed disk spin test series. At the example of an turbine impeller the effects of rotation and temperature are analyzed with special focus on mistuning and damping. The forced response is measured synchronously via 13 identical positioned strain gauges on each blade as well as via blade tip-timing. Subsequently it is possible to compare the results of both systems. During the test series rotational speed varies in the range from 10.000 up to 19.000 RPM. Simultaneously, the wheel is heated up to 820 K by an oven. A number of pre-selected natural frequencies, damping ratios and operating deflection shapes are evaluated and compared with respect to different rotational speeds and impeller temperatures.
Copyright © 2015 by ASME
The forced response of an E3E-type high pressure compressor blisk front rotor is analyzed with regard to intentional mistuning and its robustness towards additional random mistuning. Both a chosen alternating mistuning pattern and artificial mistuning patterns optimized concerning the forced response are considered. Focusing on three different blade modes, subset of nominal system mode-based reduced order models are employed to compute the forced response. The disk remains unchanged while the Young’s modulus of each blade is used to define the particular mistuning pattern. The well established aerodynamic influence coefficient technique is employed to model aeroelastic coupling and hence to consider the strongly mode- and inter blade phase angle-dependent aerodynamic damping contribution.
It has been found that a reduction of the maximum forced response beyond that of the tuned reference can be achieved for particular mistuning patterns and all modes considered. This implies an exciting engine order which would cause a low nodal diameter mode in case of a tuned blisk. At best a nearly 50% reduction of maximum response magnitudes is computed for the fundamental bending mode and large mistuning. The solution proved to be robust towards additional random mistuning of reasonable magnitude, which is of particular interest with regard to a potential technical realization. In case of small mistuning as assumed for the first torsion and the longitudinal bending mode the advantage of achieving response magnitudes beyond the tuned reference gets lost indeed, if random mistuning is superimposed. However, mostly a lower response level is calculated compared to responses obtained from models adjusted to mistuning determined by experiment.
Copyright © 2015 by ASME
Experimentelle und theoretische Untersuchungen des dynamischen Verhaltens von Fernmeldetürmen
(2000)
The forced response of an E3E-type HPC-blisk front rotor is analyzed with regard to varying mistuning and the consideration of the fluid-structure interaction (FSI). For that purpose, a reduced order model is used in which the disk remains unchanged and mechanical properties of the blades namely stiffness and damping are adjusted to measured as well as intentional blade frequency mistuning distributions. The aerodynamic influence coefficient technique is employed to model the aeroelastics. Depending on the blade mode, the exciting engine order and aerodynamic influences it is sought for the worst mistuning distributions with respect to the maximum blade displacement based on optimization analyses. Genetic algorithms using blade alone frequencies as design variables are applied. The validity of the Whitehead-limit is assessed in this context. In particular, the question is addressed if and how far aeroelastic effects, mainly caused by aerodynamic damping, combined with mistuning can even cause a reduction of the forced response compared to the ideally tuned blisk. It is shown that the strong dependence of the aerodynamic damping on the inter-blade phase angle is the main driver for a possible response attenuation considering the fundamental as well as a higher blade mode. Furthermore, the differences to the blisk vibration response without a consideration of the flow and an increase of the disk’s stiffness are discussed. Closing, the influence of pure damping mistuning is analyzed again using optimization.
Die Verbesserung von Kalibriermethoden für Hochdruckverdichterstufen in ausgeführter Integralbauweise verlangt von den Ingenieuren ein detaillierteres Verständnis der strukturdynamischen Zusammenhänge dieses komplexen Bauteils. Als Ausgangsbasis werden zunächst für das perfekte Normdesign bei Ausnutzung der vorliegenden zyklischen Rotationssymmetrie numerische Ergebnisse vorgestellt. Dabei stehen bezüglich des Schwingverhaltens die Kopplungseffekte zwischen Scheibe und Schaufeln im Mittelpunkt, wobei experimentelle Untersu-chungen am realen Bauteil ergänzend hinzugezogen werden. Zukünftig wird in einem weiteren Schritt im Rahmen erheblich aufwendigerer Berechnungen mit der Berücksichtigung von Imperfektionen hinsichtlich der filigranen Schaufeln die Rotationssymmetrie aufgegeben und somit die Basis für eine gezielte Beeinflussung des Schwingverhaltens infolge von Mistuning - Effekten geschaffen.