• search hit 8 of 13
Back to Result List

Influence of the Initial Microstructure on the Mechanical Behavior During Forming for Inline Manufacturing Process Routes

  • With a view of sustainability and the rising energy costs currently, manufacturing processes of metals are becoming increasingly focused on optimizing process parameters such as energy and time consumption. A conventional hot-forming process route currently involves casting an ingot, letting it cool down, and heating it up again for the hot-forming process (see Fig. 1a). In order to implement the combination of casting and forging, avoiding the reheating cycle and using less energy, by utilizing the casting heat (see Fig. 1b), a methodology was developed within the present work to quantify the influence of the resulting microstructure as a function of the cooling rate on the forming and recrystallization behavior (see Fig. 1c). For this purpose, AISI 301 austenitic stainless-steel cast samples with different cast cooling rates were generated. An in-situ high-temperature microscope is used to determine the holding time and the heating rate. Dilatometer tests are performed to characterize the interaction between initialWith a view of sustainability and the rising energy costs currently, manufacturing processes of metals are becoming increasingly focused on optimizing process parameters such as energy and time consumption. A conventional hot-forming process route currently involves casting an ingot, letting it cool down, and heating it up again for the hot-forming process (see Fig. 1a). In order to implement the combination of casting and forging, avoiding the reheating cycle and using less energy, by utilizing the casting heat (see Fig. 1b), a methodology was developed within the present work to quantify the influence of the resulting microstructure as a function of the cooling rate on the forming and recrystallization behavior (see Fig. 1c). For this purpose, AISI 301 austenitic stainless-steel cast samples with different cast cooling rates were generated. An in-situ high-temperature microscope is used to determine the holding time and the heating rate. Dilatometer tests are performed to characterize the interaction between initial microstructure and the flow curves to verify the determination method (see Fig. 1d). The aim was to demonstrate whether the microstructure evolution and mechanical behavior is affected by the initial microstructure. The flow curves and the post-forming microstructure show a higher degree of recrystallization in fast-cooled microstructure than slow-cooled microstructure. Hence, it was found that the initial microstructure and the associated temperature history does have an impact on the mechanical properties.show moreshow less

Export metadata

Additional Services

Search Google Scholar
Metadaten
Author: Avantika Jhanji, Benjamin Sydow, Tom-Eric Adams, Stefan Habisch, Sebastian HärtelORCiD
DOI:https://doi.org/10.1007/978-3-031-40920-2_53
ISBN:978-3-031-40919-6
ISBN:978-3-031-40920-2
ISSN:2195-4356
Title of the source (English):Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity, ICTP 2023 - Volume 2
Publisher:Springer Nature Switzerland
Place of publication:Cham
Document Type:Conference publication peer-reviewed
Language:English
Year of publication:2023
Contributing Corporation:TU München
First Page:513
Last Page:524
Series ; volume number:Lecture Notes in Mechanical Engineering
Way of publication:Open Access
Faculty/Chair:Fakultät 3 Maschinenbau, Elektro- und Energiesysteme / FG Hybride Fertigung
Einverstanden ✔
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.