TY - GEN A1 - Stolz, Kateryna A1 - Möhlenkamp, Georg A1 - Nikodinoski, Mirko T1 - Dimensionierung eines Multi-Energiespeichers T2 - Netzpraxis : Magazin für zukunftsfähige Stromnetze, Planung, Bau, Betrieb, Service N2 - Batterie-und Wasserstoff-Speicherkraftwerke sind in vielen Veröffentlichungen und energiepolitischen Dokumenten des Gesetzgebers als vorrangige emissionsfreie Ergänzung zur steigenden volatilen Einspeisung aus erneuerbaren Energien (EE) beschrieben. Allerdings sind ihre wichtigen technischen Auslegungsparameter wie installierte Leistung und Kapazität daraus nicht ableitbar. An dieser aktuellen Problematik wird im Energie-Innovationszentrum (EIZ) an der BTU Cottbus-Senftenberg geforscht. Ein EIZ-Multi-Speicherkraftwerk soll die Größe eines konventionellen Kraftwerkblocks von bis zu 600 MW haben und eine Batterie-Kurzzeit- sowie einen H2 -Langzeitspeicher umfassen. KW - Multi-Energiespeicher, Sektorenkopplung Y1 - 2025 UR - https://emagazin.np-magazin.de/de/profiles/4223bf679ada/editions/189c95bc044a8e6bd87e/preview_pages SN - 1611-0412 VL - 64 IS - 7-8 SP - 52 EP - 57 PB - VDE Verlag GmbH CY - Berlin ER - TY - GEN A1 - Yang, Yinghui A1 - Möhlenkamp, Georg ED - Deutsche Gesellschaft f. Luft u. Raumfahrt, DGLR T1 - Sizing and parameter study of compressor case-mounted permanent magnet synchronous motor for hybrid electrical compressor integration T2 - Conference Paper N2 - This paper discusses the sizing and parameter estimation of a case-mounted permanent magnet synchronous motor designed for integration into a counter-rotating hybrid electrical compressor. The motor features a toroidal winding stator and a sinusoidal Halbach array permanent magnet rotor. The structure of the motor is modeled as several 2D hollow cylindrical layers for analysis and simulation. The motor model is developed with a focus on estimating parameters such as motor mass, power, and efficiency. Based on this model, a motor design algorithm is created to generate a motor design map. Serving as part of a multidisciplinary design approach, the electrical motor design map is generated as a look-up table for interfacing with other design disciplines, such as aerodynamic design, mechanical design, and propulsion system design. Therefore, motor design parameters are selected with particular emphasis on geometry and mechanical performance. The full factorial experimental method is applied to create the design map. Finally, comparative studies are conducted using the controlled variable method to analyze typical relationships between motor geometry, mass, power, efficiency, and design parameters. KW - Hybrid Electrical Compressor KW - PMSM KW - Parameter Study KW - Efficiency Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:101:1-2411061312377.659630030958 VL - 2024 SP - 1 EP - 8 PB - Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V CY - Bonn ER - TY - GEN A1 - Möhlenkamp, Georg A1 - Baig, Faryal T1 - Electrical model validation of magnetic cores for current sensing and loop filter applications T2 - 2024 International Symposium on Electromagnetic Compatibility – EMC Europe Y1 - 2024 U6 - https://doi.org/10.1109/EMCEurope59828.2024.10722481 VL - 2024 PB - IEEE ER - TY - GEN A1 - Möhlenkamp, Georg T1 - Comparative analysis of various magnetic cores for current sensing in active EMI filters T2 - 2024 International Symposium on Electromagnetic Compatibility – EMC Europe Y1 - 2024 U6 - https://doi.org/10.1109/EMCEurope59828.2024.10722356 VL - 2024 SP - 1 EP - 6 PB - IEEE ER - TY - GEN A1 - Möhlenkamp, Georg A1 - Yang, Yinghui T1 - Analytical model for magnetic field distribution and electromagnetic characteristics analysis of permanent magnet synchronous motor with toroidal winding stator and sinusoidal Halbach array rotor T2 - 13th International Conference on Power Electronics, Machines and Drives (PEMD 2024) N2 - This paper presents an analytical model for the rapid examination of the magnetic field distribution and electromagnetic characteristics of a Permanent Magnet Synchronous Motor (PMSM) featuring a toroidal winding stator (TWS) and a sinusoidal Halbach array rotor (SHAR). The analytical model for magnetic field distribution is established by solving the governing Laplace’s and Poisson’s equations of the vector magnetic potential. The no-load magnetic field distribution from SHAR and the magnetic field induced from the armature reaction are individually analyzed. According to superposition theory, the complete magnetic field distribution is derived. Furthermore, an analytical model for motor electromagnetic characteristics, including motor inductances, electromagnetic torque, and motor on-load induced voltage, is formulated. Lastly, the precision of the analytical model is verified through finite element analysis (FEA) simulations across various operational points. Y1 - 2024 UR - https://ieeexplore.ieee.org/document/10663622 U6 - https://doi.org/10.1049/icp.2024.2159 VL - 2024 SP - 1 EP - 8 PB - IET CY - Stevenage ER - TY - THES A1 - Zent, Natalia T1 - Spannungsregelung und Stabilitätsverhalten dezentraler Erzeugungsanlagen in stromrichterdominierten Verteilernetzen N2 - In dieser Arbeit wird die Neue Direkte Spannungsregelung von dezentralen Erzeugungsanlagen in der PowerFactory Simulationsumgebung von der DIgSILENT GmbH implementiert und das Stabilitätsverhalten dieser Anlagen in Verteilernetzen untersucht. Auf die Vorgaben der VDE-AR-N-4110 und VDE-AR-N-4120 wird insbesondere eingegangen. Die Herleitung der mathematischen Modelle erfolgt im Laplace-Bereich und gibt die Möglichkeit her, neben ihrem Einsatz in Netzberechnungssoftware, die Auslegung und Optimierung der Regelung des gesamten Netzmodells zu berechnen. Die Ableitung der Regelungsmodelle der Wind-, Solar und statischen Generator-Anlagen erfolgt dabei in der Raumzeigerdarstellung im dq-Koordinatensystem. Mit Hilfe der Raumzeigerrechnung können elektrische Größen in Drehstromverbrauchern schnell berechnet und anschaulich im stationären Zustand als Gleichgrößen dargestellt werden. Der erste Teil der Arbeit behandelt die Auswahl der Netztopologie und Netzmodelle in der Power Factory Simulationsumgebung. Die ausgewählten Benchmark-Modelle der ARGE FNB OST (Arbeitsgemeinschaft Flächennetzbetreiber Ost) sind synthetische 110-kV-Verteilernetze, die vorgelagerte Höchst- und nachgelagerte Mittelspannungsnetzmodelle beinhalten. Der gesamte Leistungsbedarf im Netz liegt bei Höchstlast 1.083 GW und verteilt sich auf die verschiedenen Spannungsebenen. Die stationäre Berechnung der Lastflüsse wird unter der Berücksichtigung des maximalen Anteils und der räumlichen Verteilung der Dezentralen Erzeugungsanlagen (DEA) als auch der Charakteristik der Verbraucherstrukturen durchgeführt. Im zweiten Teil wird die Neue Direkte Spannungsregelung der dezentralen Erzeugungsanlagen implementiert. Die Regler werden unter Verwendung geeigneter Auslegungsverfahren, wie dem Betragsoptimum, hinsichtlich des dynamischen Führungsverhaltens eingestellt. Es wird durch die dynamische Simulation nachzuweisen, dass elektrische Verteilernetze auch mit sehr hohem Stromrichteranteil durch das neue Spannungsregelungsverfahren stabil und sicher betrieben werden können. Im dritten Teil wird ein „worstcase“ betrachtet. Hier geht es um ein simuliertes Splitting-System Szenario. Ein großer Teil des Verteilernetzes trennt sich und bildet ein Inselnetzwerk. Das dabei entstehende Leistungsungleichgewicht, ein Sprung von ungefähr 5 bis 10 GW, soll durch die Spannungsregelung ausgeglichen werden. KW - Erzeugungsanlagen KW - Laplace-Bereich KW - PowerFactory KW - Spannungsregelung KW - Stabilitätsverhalten Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-64445 CY - Cottbus ; Senftenberg ER - TY - GEN A1 - Yang, Yinghui A1 - Möhlenkamp, Georg T1 - Short Circuit Behavior of Dual Three-phase Permanent Magnet Synchronous Motors with Different Mutual Inductance in Electric Propulsion Application T2 - 24th European Conference on Power Electronics and Applications (EPE'22 ECCE Europe), 5-9 Sept. 2022, Hanover, Germany N2 - The dual three-phase permanent magnet synchronous motors (DTP-PMSMs) are suitable in aircraft electric propulsion unit (EPU) application because of their good reliability and fault-tolerant capability. However, this fault-tolerant capability can get weakened or even eliminated in short circuit fault due to the influence of flux coupling between the two isolated three-phase sub-systems. In this paper, a mathematical model of DTP-PMSMs with different mutual inductance between the two sub-systems is developed and analyzed. Based on the model, different short circuit protection methods are discussed and compared. Finally, a simulation of an EPU consisting of a DTP-PMSM, and a simplified constant speed propeller (CSP), is implemented to verify the short circuit behaviors. Y1 - 2022 UR - https://ieeexplore.ieee.org/document/9907438 SN - 978-1-6654-8700-9 SN - 978-9-0758-1539-9 SP - 1 EP - 10 PB - IEEE CY - Piscataway, NJ ER - TY - GEN A1 - Möhlenkamp, Georg A1 - Nadebohr, Andre A1 - Stolz, Kateryna T1 - Simulation und Vergleich zweier Betriebsarten des Antriebssystems für HELMS-Lokomotiven T2 - ETR : Eisenbahntechnische Rundschau KW - Hybridantriebssystem für Lokomotiven KW - Seriell-parallel Hybridantriebssystem der HELMS-Rangierlokomotiven Y1 - 2021 SN - 0013-2845 IS - 9 SP - 66 EP - 68 ER - TY - GEN A1 - Nadebohr, Andre A1 - Noack, Toralf T1 - Ein neuartiges Seriell-parallel-Hybridantriebssystem für Lokomotiven T2 - ETR : Eisenbahntechnische Rundschau KW - Hybridantriebssystem für Lokomotiven Y1 - 2020 UR - www.eurailpress.de/etr SN - 0013-2845 IS - 11 SP - 48 EP - 51 ER - TY - THES A1 - Neuschl, Zdeno T1 - Rechnerunterstützte experimentelle Verfahren zur Bestimmung der lastunabhängigen Eisenverluste in permanentmagnetisch erregten elektrischen Maschinen mit additionalem Axialfluss KW - Elektrische Maschine KW - Dauermagnet KW - Eisen KW - Verlust KW - Messung Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus-1802 ER -