TY - CHAP A1 - Michailov, Vesselin A1 - Stapelfeld, Christoph A1 - Doynov, Nikolay T1 - Verzugsberechnung einer komplexen Struktur mittels eines analytisch-numerischen Hybridmodells T2 - DVS Congress 2010, Große Schweißtechnische Tagung, Studentenkongress, Statusseminar "Schneidtechnik" - Abschlusskolloquium zum AiF-Forschungscluster "Integration des Rührreibschweißens in Fertigungsprozessketten, Nürnberg 27./28. September 2010 KW - Verzugsberechnung KW - berechnung KW - komplexe Struktur KW - analytisch KW - numerisch KW - Hybridmodell KW - model KW - schweißen KW - fügen KW - simulieren Y1 - 2010 SN - 978-3-87155-592-3 SP - 128 EP - 132 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Schleuß, Leander A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Widerstandspunktschweißen strukturierter Bleche - Schweißbereiche, Prüfung, Anwendung KW - Widerstandspunktschweißen KW - strukturiert KW - Bleche KW - Schweißbereich KW - Prüfung KW - Anwendung KW - schweißen KW - fügen Y1 - 2010 ER - TY - CHAP A1 - Michailov, Vesselin A1 - Ossenbrink, Ralf A1 - Stapelfeld, Christoph T1 - Anwendungsnahe Schweißsimulation komplexer Strukturen KW - Schweißsimulation KW - komplexe Struktur KW - Strukturen KW - schweißen KW - fügen KW - simulieren Y1 - 2010 SN - 978-3-87155-290-8 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Kennlinien zur Festlegung der erforderlichen räumlichen und zeitlichen Diskretisierung bei der thermomechanischen Schweißsimulation KW - thermomechanisch KW - Schweißsimulation KW - schweißen KW - fügen KW - simulieren KW - Simulation Y1 - 2010 ER - TY - CHAP A1 - Michailov, Vesselin A1 - Hantelmann, Cord A1 - Kloshek, Alexander T1 - Impulsrührreibschweißen - ein Verfahren mit neuen Möglichkeiten T2 - Große Schweißtechnische Tagung 2011 Y1 - 2011 SN - 978-3-87155-267-0 SP - 171 EP - 176 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Graf, K. A1 - Schleuß, Leander A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Auswirkung von strukturierten Fügepartnern auf geklebte Verbindungen T2 - Große Schweißtechnische Tagung 2011 Y1 - 2011 SN - 978-3-87155-267-0 SP - 472 EP - 477 PB - DVS-Verl. CY - Düsseldorf ER - TY - CHAP A1 - Michailov, Vesselin A1 - Kloshek, Alexander A1 - Doynov, Nikolay T1 - Thermomechanische Simulation geschweißter Mischverbindungen aus Aluminium- und Stahlwerkstoffen T2 - Jahrbuch Schweißtechnik 2012 Y1 - 2011 SN - 978-3-87155-606-7 SP - 173 EP - 184 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Kloshek, Alexander A1 - Michailov, Vesselin T1 - Numerische Simulation der Strömungen in einer Schweißhaube T2 - Die Verbindungs-Spezialisten 2009 Y1 - 2009 SN - 978-3-87155-584-8 PB - DVS-Verl. CY - Düsseldorf ER - TY - GEN A1 - Michailov, Vesselin A1 - Doynov, Nikolay A1 - Stapelfeld, Christoph A1 - Ossenbrink, Ralf T1 - Hybrid Model for Prediction of Welding Distortions in Large Structures T2 - Journal of Frontiers of Materials Science Y1 - 2011 SN - 2095-025X VL - 5 IS - 2 SP - 209 EP - 215 ER - TY - GEN A1 - Fritzsche, Sebastian A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Experimental characterisation of structured sheet metals T2 - Key Engineering Materials Y1 - 2011 SN - 1013-9826 SN - 1662-9795 VL - 473 SP - 404 EP - 411 ER - TY - GEN A1 - Brandl, Erhard A1 - Palm, Frank A1 - Michailov, Vesselin A1 - Viehweger, Bernd A1 - Leyens, Christoph T1 - Mechanical properties of additive manufactured titanium (Ti-6Al-4V) blocks deposited by a solid-state laser and wire T2 - Materials and Design KW - Non-ferrous metals and alloys KW - Mechanical KW - Microstructure Y1 - 2011 SN - 0261-3069 VL - 32 IS - 10 SP - 4665 EP - 4675 ER - TY - GEN A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Physical and numerical simulation of thermo-mechanical properties in the weld heat affected zone of an AlMgSi-alloy T2 - Materials Science Forum Y1 - 2012 SN - 0255-5476 VL - 706-709 SP - 1491 EP - 1496 ER - TY - GEN A1 - Malikov, Viatcheslav A1 - Ossenbrink, Ralf A1 - Viehweger, Bernd A1 - Michailov, Vesselin T1 - Experimental investigation and analytical calculation of the bending force for air bending of structured sheet metals T2 - Advanced Materials Research KW - air bending KW - structured sheet metal KW - bending force Y1 - 2012 SN - 1022-6680 VL - 418-420 SP - 1294 EP - 1300 ER - TY - GEN A1 - Kornienko, Elena A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Corrosion properties of structured sheet metals in salt environment T2 - Engineering Review Y1 - 2011 SN - 1330-9587 VL - 31 IS - 2 SP - 97 EP - 104 ER - TY - GEN A1 - Bandl, Erhard A1 - Michailov, Vesselin A1 - Viehweger, Bernd A1 - Leyens, Christoph T1 - Deposition of Ti-6Al-4V using laser and wire, part II: Hardness and dimensions of single beads T2 - Surface & Coatings Technology Y1 - 2011 SN - 0257-8972 VL - 206 IS - 6 SP - 1130 EP - 1141 ER - TY - GEN A1 - Malikov, Viatcheslav A1 - Ossenbrink, Ralf A1 - Viehweger, Bernd A1 - Michailov, Vesselin T1 - Analytical and numerical calculation of the force and power requirements for air bending of structured sheet metals T2 - Key Engineering Materials KW - air bending, structured sheet metal, simulation Y1 - 2011 U6 - https://doi.org/10.4028/www.scientific.net/KEM.473.602 SN - 1013-9826 VL - Vol. 473 SP - 602 EP - 609 ER - TY - BOOK A1 - Michailov, Vesselin A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf T1 - Sensibilitätsanalyse der thermomechanischen FE-Schweißsimulation KW - FE-Schweißsimulation, Sensibilitätsanalyse, FE-Netz, Wärmequellen, Werkstoffkennwerte Y1 - 2012 UR - http://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-1016-9 SN - 978-3-8440-1016-9 PB - Shaker CY - Aachen ER - TY - GEN A1 - Genchev, Gancho Vladimirov A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Physical and Numerical Simulation of the Heat-affected Zone of Multi-pass Welds T2 - Materials Science Forum N2 - The paper presents a numerical and experimental approach for the quantification of the thermo-mechanical properties in multi-pass weld’s heat affected zone (HAZ) of low alloy steel “S355J2+N”. First, the characteristic temperature cycles for multi-pass welds were identified by FE temperature field simulations of welding. Based on the identified temperature cycles, the microstructure in the HAZ has been physically simulated with the simulation and testing system Gleeble 3500 to investigate the influence of multi thermal exposure on the thermo-mechanical properties. Thus, the thermo-mechanical material properties including thermal strain and temperature dependent stress strain behaviour as function of peak temperatures and cooling rates have been determined. These material properties were used to calibrate a developed model for numerical prediction of the material properties of multi-pass weld HAZ. KW - welding simulation KW - multi-pass welds KW - thermo-mechanical properties KW - physical simulation, Gleeble Y1 - 2013 UR - www.scientific.net/MSF.762.544 SN - 0255-5476 IS - Vol. 762 SP - 544 EP - 550 ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin ED - Keßler, Olaf T1 - Gefügeeigenschaften in der Wärmeeinflusszone von Mehrlagenschweißungen aus S355J2+N T2 - Fortschritte in der Metallographie KW - Wärmeeinflusszone der Mehrlagenschweißung KW - experimentelle Werkstoffkennwerte Y1 - 2012 SN - 978-3-88355-392-4 SP - 167 EP - 172 PB - Inventum CY - Bonn ER - TY - THES A1 - Ossenbrink, Ralf T1 - Thermomechanische Schweißsimulation unter Berücksichtigung von Gefügeumwandlungen KW - Schweißsimulation KW - Eigenspannung KW - Laserstrahlschweißen KW - STAAZ-Modell KW - Stahl KW - Umwandlungsplastizität KW - thermomechanische Werkstoffkennwerte Y1 - 2009 SN - 978-3-8322-8131-1 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Ossenbrink, Ralf A1 - Brand, M. A1 - Michailov, Vesselin T1 - Numerische Simulation der Eigenspannungen und des Bauteilverzugs beim Schweißen mit Berücksichtigung des Umwandlungsverhaltens T2 - Große Schweißtechnische Tagung, Schweissen und Schneiden, 2003 KW - Laserstrahlschweißen; Eigenspannung; Verzug; numerische Simulation; thermomechanische Kennwerte Y1 - 2003 SN - 3-87155-683-1 SP - 279 EP - 283 PB - DVS-Verlag CY - Düsseldorf ER - TY - GEN A1 - Michailov, Vesselin A1 - Stadtaus, Marc T1 - Einige Probleme der FE-Simulation zur Wasserstoff- und Stickstoffverteilung beim Schweißen T2 - Zeitschrift für Metallkunde KW - Wasserstoff- und Stickstoffverteilung KW - FE-Simulation des Schweißens Y1 - 2001 SN - 0044-3093 VL - 92 IS - 3 SP - 247 EP - 252 ER - TY - GEN A1 - Zhang, Wei A1 - Doynov, Nikolay A1 - Wolf, Matthias A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Investigation of the Thermal Shock Behavior of Ceramic Using a Combination of Experimental Testing and FE-Simulation Methods T2 - Advanced engineering materials N2 - Thermal shock behavior of ceramics plays a decisive role in their broad industrial applications. For enhanced understanding of damage and failure mechanism under thermal shock loading, in the present work, a combination of experimental testing and numerical simulation methods has been used. The thermal shock behavior of the alumina (99.7%) disk samples has been investigated by using a plasma test stand: the bottom of the ceramic disks were locally heated in the center by plasma beam; during the heat treatment the temperature distribution at the top of the sample was recorded with a thermographic system. To characterize the thermal shock resistance, a thermomechanical simulation was subsequently carried out. It calculates the temperature and stress distribution within the ceramic disks. The calculated critical thermal tension stresses are reported, which led to the failure of the ceramic disks under thermal shock loading. The effect of the sample thickness on the temperature and stress distribution is presented. Compared with the experimental results the simulated results show excellent agreement. As conclusion, it is possible to determine the thermal shock behavior of ceramic materials by the combination of experimental testing and numerical simulation. KW - Thermal Shock Behavior KW - Ceramic KW - FE-Simulation KW - Experimental Testing Y1 - 2013 UR - http://www.aem-journal.com U6 - https://doi.org/10.1002/adem.201200241 SN - 1527-2648 VL - 15 IS - 6 SP - 480 EP - 484 ER - TY - CHAP A1 - Doynov, Nikolay A1 - Christov, St. A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Finite Elements Simulation of Multipass Submerged Arc Welding T2 - Mathematical Modelling of Weld Phenomena 6 KW - Multipass Submerged Arc Welding KW - Finite Elements Simulation Y1 - 2002 SN - 978-1-902653-56-3 SP - 651 EP - 669 PB - Maney – IOM CY - London ER - TY - CHAP A1 - Stadtaus, Marc A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Simulation of Weld Shape, Microstructure, Distortion and Residual Stresses for Laser Beam Welding T2 - Mathematical Modelling of Weld Phenomena 6 KW - Laser Beam Welding KW - Simulation of Weld Shape KW - Microstructure KW - Distortion and Residual Stresses Y1 - 2002 SN - 978-1-902653-56-3 SP - 419 EP - 442 PB - Maney – IOM CY - London ER - TY - CHAP A1 - Rethmeier, M. A1 - Stadtaus, Marc A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Numerical Calculation of Temperature Load and Distortion during Welding of Circumferential Weld Seams T2 - Mathematical Modelling of Weld Phenomena 6 KW - Numerical calculation of temperature load and distortion KW - Circumferential weld seams Y1 - 2002 SN - 978-1-902653-56-3 SP - 685 EP - 702 PB - Maney – IOM CY - London ER - TY - CHAP A1 - Stadtaus, Marc A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Berechnung von Nahtgeometrie, Gefüge, Verzug und Eigenspannungen beim Schmelzschweißen T2 - Schweißen und Schneiden 2001 KW - Berechnung von Nahtgeometrie KW - Gefügesimulation KW - Verzug und Eigenspannungen Y1 - 2001 SN - 978-3-87155-674-6 SP - 315 EP - 321 PB - DVS Verlag CY - Düsseldorf ER - TY - CHAP A1 - Röhrs, K. A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Einfluss von Beimengungen zum Schutzgas beim Lichtbogenschweißen von Aluminiumwerkstoffen T2 - Schweißen und Schneiden 2001 KW - Lichtbogenschweißen von Aluminiumwerkstoffen KW - Einfluss von Beimengungen zum Schutzgas Y1 - 2001 SN - 978-3-87155-674-6 SP - 349 EP - 354 PB - DVS Verlag CY - Düsseldorf ER - TY - GEN A1 - Stadtaus, Marc A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Numerical calculation of the main factors on cold cracking T2 - Materialwissenschaften und Werkstofftechnik KW - cold cracks; finite‐element‐analysis; Kaltrisse Y1 - 2003 U6 - https://doi.org/10.1002/mawe.200390007 SN - 0933-5137 SN - 1521-4052 VL - 34 IS - 1 SP - 145 EP - 151 ER - TY - GEN A1 - Kornienko, Elena A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Corrosion resistance of zinc-coated structured sheet metals T2 - Corrosion Science N2 - The purpose of this study is to characterise the corrosion behaviour of zinc-coated sheet metals after a structuring process using the salt spray test. The investigated structured material is manufactured by hydroforming and has a periodic hexagonal geometry. The corrosion behaviour has been evaluated by estimating the development of the corrosion area and penetration depth. The results of the investigation show that the corrosion area is larger on the smooth sheet than on the structured sheet. The difference between the structured and smooth sheets is negligible with increasing exposure time. Furthermore, the reasons for the different corrosion behaviours are discussed. KW - Corrosion KW - structur sheet metals Y1 - 2013 UR - http://www.sciencedirect.com/science/article/pii/S0010938X12006233 SN - 0010-938X VL - Vol. 69 SP - 270 EP - 280 ER - TY - GEN A1 - Voß, O. A1 - Michailov, Vesselin A1 - Decker, I. T1 - Erweiterung der numerischen Schweißsimulation zur Untersuchung metallkundlicher Fragestellungen T2 - Zeitschrift für Metallkunde KW - numerische Schweißsimulation,Gefügeumwandlungen,Werkstoffkennwerte Y1 - 2001 SN - 0044-3093 VL - 92 IS - 3 SP - 293 EP - 299 ER - TY - GEN A1 - Thomas, Karl A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Zähigkeitsuntersuchungen an schmalen Verfahrenseinflusszonen pressstumpfgeschweißter Stähle T2 - Schweißen und Schneiden KW - Zähigkeitsuntersuchungen KW - Pressstumpschweißung Y1 - 2000 VL - 52 IS - 12 SP - 734 EP - 745 ER - TY - THES A1 - Stadtaus, Marc T1 - FE-Simulation der Verteilung von Wasserstoff und Stickstoff in Schweißverbindungen KW - FE-Simulation, Kaltrisse, Stickstoffverteilung Y1 - 2014 UR - http://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-2537-8 SN - 978-3-8440-2537-8 PB - Shaker Verlag CY - Aachen ER - TY - CHAP A1 - Ossenbrink, Ralf A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay ED - Michailov, Vesselin T1 - Simulation der Schweißeigenspannungen und des -verzuges unter Berücksichtigung der Gefügeumwandlungen mit dem STAAZ-Modell T2 - Internationales Symposium Schweißtechnik - Verfahren, Werkstoffe, Simulation, Cottbus, 6. November 2013 N2 - Die vorliegende Arbeit stellt das von Professor Michailov vorgeschlagene Spitzentemperatur-Austenitisierungs- Abkühlzeit-Modell für die thermomechanische Schweißsimulation unter Berücksichtigung der Gefügeumwandlungen vor. Das Modell erfasst die für die Gefügeausbildung maßgebenden Temperaturzyklen durch seine drei so genannten STAAZ-Parameter: Spitzentemperatur, Austenitisierungs- und Abkühlzeit. Die Korrelation dieser Temperaturzyklusparameter mit den thermomechanischen gefügeabhängigen Werkstoffeigenschaften erfolgt auf Grundlage einer empirischen Datenbasis. Mit der vorgenommenen Erweiterung zu Mehrmalig-(M-)STAAZ lässt sich das aus einem vorgelagerten Temperaturzyklus entstandene Zwischengefüge berücksichtigen. KW - Schweißsimulation; STAAZ-Modell ; thermomechanische Werkstoffkennwerte ; Mehrlagenschweißungen Y1 - 2013 SN - 978-3-8440-2319-0 SP - 149 EP - 167 PB - Shaker Verlag CY - Aachen ER - TY - THES A1 - Kornienko, Elena T1 - Einfluss der Beschichtung und des Schweißens auf das Korrosionsverhalten von strukturierten Blechen KW - Korrosion; Korrosionsschutz; Beschichtung; Schweißen; strukturiertes Blech Y1 - 2014 SN - 978-3-8440-3087-7 PB - Shaker CY - Aachen ER - TY - THES A1 - Sasse, Ina T1 - Schneiden und Schweißen strukturierter Bleche mit Faserlaser KW - Laserstrahlschneiden; Laserstrahlschweißen; Forschung und Entwicklung; Fügetechnik Y1 - 2014 SN - 978-3-8440-3035-8 PB - Shaker CY - Aachen ER - TY - THES A1 - Kapp, Mirjam T1 - Untersuchung der Einflussfaktoren auf die Kaltrissanfälligkeit niedriglegierter Stähle beim Laserstrahlschweißen an zylindrischen Bauteilen KW - Laserstrahlschweißen; Schweißsimulation; Finite-Elemente-Methode; Eigenspannungen; Werkstoffdaten; Kaltrisse Y1 - 2014 SN - 978-3-8440-3452-3 PB - Shaker CY - Aachen ER - TY - THES A1 - Stapelfeld, Christoph T1 - Vereinfachte Modelle zur Schweißverzugsberechnung N2 - Joining by means of welding has a vital importance in many sectors of industry. However, the uneven heating of the welded structure results in unwanted distortions, which has to be removed by cost-intensive after treatments. Knowing the welding distortions in an early stage of the product development cycle enables taking countermeasures or define after treatments, already in the product planning. The aim of this research study is the development and implementation of an analytic numerical hybrid model for the distortion calculation of large welded structures. The basis of the hybrid model is the analytical shrinkage force model, which is upgraded for modern welding processes and new materials. By means of experimental as well as numerical investigations, the instability of thin walled structures during welding is reviewed and a possibility for capturing is proposed. The linking of the analytical and the numerical method opens up the possibility for calculating the distortions caused by curved trajectories. To simplify the application of the hybrid model, a software will be programmed, including the complex mathematical approach of the shrinkage force model. It determines the mechanical loads, depending on the geometry of the welded structure, material data and weld parameters. The verification of the program as well as the coupling procedure is done on butt joints. The same welded structures are used for the investigation of the stability and the sensibility of the hybrid model afterwards. Finally the hybrid model will be applied to welded structures of different complexity and the results will be compared with experimental measurements. At the beginning butt and T-joints are determined, followed by the distortion calculation of a evaluation model made up of 8 welds. At the end an entire section of a ship deck, whereupon different elements are assembled by about 90 welds on a 20x16 meter large ground plate, is estimated. N2 - Dem Fügen mittels Schweißen kommt in vielen Industriezweigen eine zentrale Bedeutung zu. Durch die ungleichmäßige Erwärmung der Schweißverbindung kommt es jedoch zu unerwünschten Verformungen, die durch kostenintensive Nachbehandlungen beseitigt werden müssen. Ist der bleibende Schweißverzug bereits in einem frühen Stadium des Produktentwicklungszyklus bekannt, können geeignete Gegenmaßnahmen ergriffen oder Nachbehandlungen bereits in der Produktplanung festgelegt werden. Das Kernziel dieser Arbeit ist die Entwicklung und Umsetzung eines gekoppelten analytisch numerischen Hybridmodells für die Schweißverzugsberechnung von Großstrukturen. Die Basis hierfür liefert das Schrumpfkraftmodell, welches um moderne Schweißverfahren und neue Werkstoffe erweitert wird. Sowohl experimentell als auch mittels numerischer Analysen wird die Instabilität dünnwandiger Strukturen untersucht und eine mögliche Erfassung im Schrumpfkraftmodell vorgeschlagen. Durch die analytisch numerische Kopplung stellt auch die Berechnung der Verzüge, hervorgerufen durch krummlinig wandernde W\"armequellen keine Hürde mehr dar und wird implementiert. Um die Anwendung des Hybridmodells zu vereinfachen, wird ein Programm entwickelt, welches die umfangreiche mathematische Vorgehensweise des Schrumpfkraftmodells beinhaltet und aufgrund der Geometrie der Schweißverbindung, des Werkstoffs und der Schweißparameter die mechanischen Lasten berechnet. Die Verifizierung der Software, des Kopplungsalgorithmus sowie die Untersuchung der Stabilität und Sensibilität des Hybridmodells erfolgt an Stumpfstoßverbindungen. Abschließend wird das Modell an unterschiedlich komplexen Schweißkonstruktionen angewandt und die berechneten Schweißverzüge mit experimentellen Messungen verglichen. Eingangs werden einfache I- und T-Stoßverbindungen betrachtet. Es folgt die Verzugsberechnung eines Demonstrators aus dem Schiffbau mit 8 Schweißnähten sowie einer gesamten Decksektion mit ca. 90 Nähten, wobei verschiedene Elemente auf eine Grundplatte von 20x16 Metern gefügt werden. KW - Schweißen KW - Schweißverzug KW - Schrumpfkraftmodell KW - Weld Distortion KW - shrinkage force Y1 - 2016 SN - 978-3-8440-4142-2 PB - Shaker Verlag GmbH CY - Aachen ER - TY - GEN A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Quantification of cold cracking parameters of high strength steels by physical simulation under welding conditions T2 - Quarterly journal of the Japan Welding Society N2 - Cold cracks in welds are the result of the formation of brittle microstructure as martensite in the presence of diffusible hydrogen as well as of tensile stresses. Cold cracks occur when the combination of cold crack influence parameters (CCIP) overcomes a critical limit. In this study, critical combinations of CCIP were identified with an enhanced test procedure under welding conditions. The test is based on the physical simulation technique of heat affected zone (HAZ) and it is carried out using the test and simulation center Gleeble 3500. Thereby, laboratory special specimens are charged with hydrogen from pure hydrogen atmosphere in the initial stage of the test. Rigidly restraint specimen section is subjected to different weld temperature cycles. Through the thermal exposure, the desired microstructure of HAZ is set in the test zone of the restraint specimen section. A plastic deformation takes place owing to the prevented expansion during heating and contraction of the specimen during cooling. Consequently, compressive or tensile reactions stresses arise in the deformed zone. Cracked specimen represents a critical combination of the CCIP. The quantitative cold crack criterion separates the cold crack susceptible combinations from those non susceptible. KW - Cold Cracking KW - Physical Simulation KW - High Strength Steel Y1 - 2013 U6 - https://doi.org/10.2207/qjjws.31.148s SN - 0288-4771 VL - 31 IS - 4 SP - 148 EP - 152 ER - TY - GEN A1 - Michailov, Vesselin A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Schweizer, Frank T1 - Rechnergestützte Vorhersage der Kaltrissneigung laserstrahlgeschweißter Bauteile aus hochfesten Stählen - Teil 1 T2 - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren KW - Kaltriss KW - hochfeste Stähle KW - laserstrahlgeschweißte Bauteile Y1 - 2013 SN - 0036-7184 VL - 65 IS - 11 SP - 776 EP - 781 ER - TY - GEN A1 - Zhang, Wei A1 - Melcher, Reinhold A1 - Travitzky, Nahum A1 - Greil, Peter T1 - Three-Dimensional Printing of Complex-Shaped Alumina/Glas Composites T2 - Advanced engineering materials Y1 - 2009 U6 - https://doi.org/10.1002/adem.200900213 SN - 1527-2648 VL - 11 IS - 12 SP - 1039 EP - 1043 ER - TY - CHAP A1 - Cypris, Jochen A1 - Weclas, Miroslaw A1 - Greil, Peter A1 - Schlier, Lorenz M. A1 - Travitzky, Nahum A1 - Zhang, Wei T1 - Application of macro-cellular SiC reactor to diesel engine-like injection and combustion conditions T2 - Porous Media and its Applications in Science, Engineering, and Industry: Fourth International Conference, Potsdam, Germany, 17-22 June 2012 KW - Three-dimensional printing, Macro-cellular SiSiC, complex shaped ceramic composites Y1 - 2012 SN - 978-0-7354-1053-4 U6 - https://doi.org/10.1063/1.4711197 SP - 341 EP - 346 PB - AIP, American Inst. of Physics CY - Melville, NY ER - TY - GEN A1 - Schlier, Lorenz M. A1 - Zhang, Wei A1 - Travitzky, Nahum A1 - Greil, Peter A1 - Cypris, Jochen A1 - Weclas, Miroslaw T1 - Macro-Cellular Silicon carbide Reactors for Nonstationary Combustion Under Piston Engine-Like Conditions T2 - International Journal of Applied Ceramic Technology KW - Three-dimensional printing KW - Macro-cellular SISIC KW - Complex shaped ceramic composites Y1 - 2011 U6 - https://doi.org/10.1111/j.1744-7402.2010.02591.x SN - 1744-7402 VL - 8 IS - 5 SP - 1237 EP - 1245 ER - TY - GEN A1 - Zhang, Wei A1 - Travitzky, Nahum A1 - Hu, Chunfeng A1 - Zhou, Yanchun A1 - Greil, Peter T1 - Reactive Hot Pressing and Properties of Nb2AlC T2 - Journal of the American Ceramic Society KW - MAX phases KW - Ceramic KW - Reactive Hot Pressing Y1 - 2009 U6 - https://doi.org/10.1111/j.1551-2916.2009.03187.x SN - 1551-2916 SN - 0002-7820 VL - 92 IS - 10 SP - 2396 EP - 2399 ER - TY - GEN A1 - Zhang, Wei A1 - Travitzky, Nahum A1 - Greil, Peter T1 - Formation of NbAl3/Al2O3 Composites by pressureless reactive Infiltration T2 - Journal of the American Ceramic Society KW - NbAl3/Al2O3 Composites KW - Pressing and three-dimensional printing KW - Reactive Infiltration Y1 - 2008 U6 - https://doi.org/10.1111/j.1551-2916.2008.02583.x SN - 1551-2916 SN - 0002-7820 VL - 91 IS - 9 SP - 3117 EP - 3120 ER - TY - GEN A1 - Melcher, Reinhold A1 - Zhang, Wei A1 - Travitzky, Nahum A1 - Greil, Peter T1 - 3D-Printing of Al2O3/Cu-O Composites T2 - Ceramic Forum international KW - Al2O3/Cu-O Composites KW - Pressureless Infiltration KW - 3D-Printing Y1 - 2006 SN - 0173-9913 VL - 83 IS - 13 SP - 18 EP - 22 ER - TY - GEN A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Modelling the Local Microstructure Properties due to Multi-Pass Welding T2 - Materials Science Forum Y1 - 2017 U6 - https://doi.org/10.4028/www.scientific.net/MSF.879.595 SN - 0255-5476 SN - 1662-9752 N1 - International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, May 29 - June 3, 2016 Graz, Austria VL - Vol. 879 SP - 595 EP - 600 ER - TY - GEN A1 - Michailov, Vesselin A1 - Doynov, Nikolay T1 - Analytical-Numerical Modeling Approach for Calculation of the Structural Distortions after Welding and Thermal Straightening T2 - Journal of Mechanics Engineering and Automation Y1 - 2016 U6 - https://doi.org/10.17265/2159-5275/2016.05.004 SN - 2159-5283 SN - 2159-5275 VL - 6 IS - 5 SP - 246 EP - 253 ER - TY - GEN A1 - Jakobsen, Daniel A1 - Zhang, Wei A1 - Doynov, Nikolay A1 - Böhm, Anna A1 - Malzbender, Jürgen A1 - Michailov, Vesselin A1 - Roosen, Andreas T1 - Thermal shock behaviour of laminated multilayer refractories for steel casting applications reinforced by residual stresses T2 - Ceramics International Y1 - 2016 U6 - https://doi.org/10.1016/j.ceramint.2016.05.149 SN - 0272-8842 VL - 42 IS - 12 SP - 13562 EP - 13571 ER - TY - GEN A1 - Zhang, Wei A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Physical and FE-Simulation of Thermal Shock Behaviour of Refractory Ceramics T2 - refractories WORLDFORUM Y1 - 2016 SN - 1868-2405 VL - 8 IS - 2 SP - 110 EP - 117 ER -