TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Kennlinien zur Festlegung der erforderlichen räumlichen und zeitlichen Diskretisierung bei der thermomechanischen Schweißsimulation KW - thermomechanisch KW - Schweißsimulation KW - schweißen KW - fügen KW - simulieren KW - Simulation Y1 - 2010 ER - TY - CHAP A1 - Michailov, Vesselin A1 - Hantelmann, Cord A1 - Kloshek, Alexander T1 - Impulsrührreibschweißen - ein Verfahren mit neuen Möglichkeiten T2 - Große Schweißtechnische Tagung 2011 Y1 - 2011 SN - 978-3-87155-267-0 SP - 171 EP - 176 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Michailov, Vesselin A1 - Doynov, Nikolay A1 - Pfennig, T. A1 - Degen, M. A1 - Ossenbrink, Ralf T1 - Simulationsgestützte Entwicklung einer Aluminium-Stahl-Schweißkontruktion eines Slicermessers für die Lebensmittelverarbeitung T2 - Große Schweißtechnische Tagung 2011 Y1 - 2011 SN - 978-3-87155-267-0 SP - 428 EP - 433 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Graf, K. A1 - Schleuß, Leander A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Auswirkung von strukturierten Fügepartnern auf geklebte Verbindungen T2 - Große Schweißtechnische Tagung 2011 Y1 - 2011 SN - 978-3-87155-267-0 SP - 472 EP - 477 PB - DVS-Verl. CY - Düsseldorf ER - TY - CHAP A1 - Michailov, Vesselin A1 - Kloshek, Alexander A1 - Doynov, Nikolay T1 - Thermomechanische Simulation geschweißter Mischverbindungen aus Aluminium- und Stahlwerkstoffen T2 - Jahrbuch Schweißtechnik 2012 Y1 - 2011 SN - 978-3-87155-606-7 SP - 173 EP - 184 PB - DVS Media GmbH CY - Düsseldorf ER - TY - GEN A1 - Michailov, Vesselin T1 - Advanced Analytical-Numerical Approach for Simulation of Welding Distortions T2 - Journal of Materials Science and Technology Y1 - 2007 SN - 0861-9786 VL - 15 IS - 3 SP - 139 EP - 150 ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Kloshek, Alexander A1 - Michailov, Vesselin T1 - Numerische Simulation der Strömungen in einer Schweißhaube T2 - Die Verbindungs-Spezialisten 2009 Y1 - 2009 SN - 978-3-87155-584-8 PB - DVS-Verl. CY - Düsseldorf ER - TY - GEN A1 - Michailov, Vesselin A1 - Doynov, Nikolay A1 - Stapelfeld, Christoph A1 - Ossenbrink, Ralf T1 - Hybrid Model for Prediction of Welding Distortions in Large Structures T2 - Journal of Frontiers of Materials Science Y1 - 2011 SN - 2095-025X VL - 5 IS - 2 SP - 209 EP - 215 ER - TY - GEN A1 - Fritzsche, Sebastian A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Experimental characterisation of structured sheet metals T2 - Key Engineering Materials Y1 - 2011 SN - 1013-9826 SN - 1662-9795 VL - 473 SP - 404 EP - 411 ER - TY - CHAP A1 - Dreibati, Ossama A1 - Zhang, Wei A1 - Wolf, Matthias A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Thermo-mechanical properties of refractory ceramic for the numerical simulation of their thermo-shock behaviour Y1 - 2011 ER - TY - CHAP A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Physical and numerical simulation of thermo-mechanical properties in the weld heat affected zone of an AlMgSi-alloy T2 - THERMEC 2011, International Conference on Processing & Manufacturing of Advanced Materials, processing, fabrication, properties, applications, August 1 - 5, 2011, Quebec City, Canada, Vol. 2 Y1 - 2011 SP - 1491 EP - 1496 PB - TTP, Trans Tech Publ. CY - Durnten-Zurich [u.a.] ER - TY - CHAP A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Hydrogen charging of high strength steel specimens and physical simulation of cold cracking under laser beam welding conditions T2 - THERMEC 2011, International Conference on Processing & Manufacturing of Advanced Materials, processing, fabrication, properties, applications, August 1 - 5, 2011, Quebec City, Canada, Vol. 2 Y1 - 2012 SN - 978-3-0-3785-303-0 SP - 1391 EP - 1396 PB - TTP, Trans Tech Publ. CY - Durnten-Zurich [u.a.] ER - TY - CHAP A1 - Kornienko, Elena A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Investigation of corrosion behaviour of structured sheet metals by salt spray test T2 - Proceedings of International Conference on Innovative Technologies, IN-TECH, 01.09.2011 to 03.09.2011, Bratislava, Slovakia Y1 - 2011 SP - 308 EP - 311 ER - TY - CHAP A1 - Sasse, Ina A1 - Schleuß, Leander A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Cutting of structured sheet metals with high power fiber laser T2 - Proceedings of International Conference on Innovative Technologies, IN-TECH, 01.09.2011 to 03.09.2011, Bratislava, Slovakia Y1 - 2011 SP - 485 EP - 488 ER - TY - GEN A1 - Brandl, Erhard A1 - Palm, Frank A1 - Michailov, Vesselin A1 - Viehweger, Bernd A1 - Leyens, Christoph T1 - Mechanical properties of additive manufactured titanium (Ti-6Al-4V) blocks deposited by a solid-state laser and wire T2 - Materials and Design KW - Non-ferrous metals and alloys KW - Mechanical KW - Microstructure Y1 - 2011 SN - 0261-3069 VL - 32 IS - 10 SP - 4665 EP - 4675 ER - TY - GEN A1 - Malikov, Viatcheslav A1 - Ossenbrink, Ralf A1 - Viehweger, Bernd A1 - Michailov, Vesselin T1 - Experimental investigation and analytical calculation of the bending force for air bending of structured sheet metals T2 - Advanced Materials Research KW - air bending KW - structured sheet metal KW - bending force Y1 - 2012 SN - 1022-6680 VL - 418-420 SP - 1294 EP - 1300 ER - TY - GEN A1 - Kornienko, Elena A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Corrosion properties of structured sheet metals in salt environment T2 - Engineering Review Y1 - 2011 SN - 1330-9587 VL - 31 IS - 2 SP - 97 EP - 104 ER - TY - GEN A1 - Bandl, Erhard A1 - Michailov, Vesselin A1 - Viehweger, Bernd A1 - Leyens, Christoph T1 - Deposition of Ti-6Al-4V using laser and wire, part II: Hardness and dimensions of single beads T2 - Surface & Coatings Technology Y1 - 2011 SN - 0257-8972 VL - 206 IS - 6 SP - 1130 EP - 1141 ER - TY - GEN A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Physical and numerical simulation of thermo-mechanical properties in the weld heat affected zone of an AlMgSi-alloy T2 - Materials Science Forum Y1 - 2012 SN - 0255-5476 VL - 706-709 SP - 1491 EP - 1496 ER - TY - GEN A1 - Malikov, Viatcheslav A1 - Ossenbrink, Ralf A1 - Viehweger, Bernd A1 - Michailov, Vesselin T1 - Analytical and numerical calculation of the force and power requirements for air bending of structured sheet metals T2 - Key Engineering Materials KW - air bending, structured sheet metal, simulation Y1 - 2011 U6 - https://doi.org/10.4028/www.scientific.net/KEM.473.602 SN - 1013-9826 VL - Vol. 473 SP - 602 EP - 609 ER - TY - BOOK A1 - Michailov, Vesselin A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf T1 - Sensibilitätsanalyse der thermomechanischen FE-Schweißsimulation KW - FE-Schweißsimulation, Sensibilitätsanalyse, FE-Netz, Wärmequellen, Werkstoffkennwerte Y1 - 2012 UR - http://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-1016-9 SN - 978-3-8440-1016-9 PB - Shaker CY - Aachen ER - TY - GEN A1 - Genchev, Gancho Vladimirov A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Physical and Numerical Simulation of the Heat-affected Zone of Multi-pass Welds T2 - Materials Science Forum N2 - The paper presents a numerical and experimental approach for the quantification of the thermo-mechanical properties in multi-pass weld’s heat affected zone (HAZ) of low alloy steel “S355J2+N”. First, the characteristic temperature cycles for multi-pass welds were identified by FE temperature field simulations of welding. Based on the identified temperature cycles, the microstructure in the HAZ has been physically simulated with the simulation and testing system Gleeble 3500 to investigate the influence of multi thermal exposure on the thermo-mechanical properties. Thus, the thermo-mechanical material properties including thermal strain and temperature dependent stress strain behaviour as function of peak temperatures and cooling rates have been determined. These material properties were used to calibrate a developed model for numerical prediction of the material properties of multi-pass weld HAZ. KW - welding simulation KW - multi-pass welds KW - thermo-mechanical properties KW - physical simulation, Gleeble Y1 - 2013 UR - www.scientific.net/MSF.762.544 SN - 0255-5476 IS - Vol. 762 SP - 544 EP - 550 ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin ED - Keßler, Olaf T1 - Gefügeeigenschaften in der Wärmeeinflusszone von Mehrlagenschweißungen aus S355J2+N T2 - Fortschritte in der Metallographie KW - Wärmeeinflusszone der Mehrlagenschweißung KW - experimentelle Werkstoffkennwerte Y1 - 2012 SN - 978-3-88355-392-4 SP - 167 EP - 172 PB - Inventum CY - Bonn ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Simulation des Mehrlagenschweißens unter Berücksichtigung der Gefügeumwandlungen T2 - Conference proceedings, 2012 - ANSYS Conference & 30. CADFEM Users' Meeting, 24. - 26. Oktober 2012, Kassel N2 - Der Konferenzvortrag stellt das entwickelte M-STAAZ Modell vor. Mit dem M-STAAZ lässt sich in der FE-Simulation die Änderung der Werkstoffkennwerte bei mehrmaliger Temperaturbelastung wie in der WEZ von Mehrlagenschweißungen berücksichtigen. KW - Simulation des Mehrlagenschweißens KW - Gefügeumwandlungen KW - M-STAAZ Modell Y1 - 2012 UR - http://www.usersmeeting.com/rueckblick/acum-2012.html UR - http://www.cadfem.de/fileadmin/shop/um/ACUM2012-DVD-Inhaltsverzeichnis.pdf SP - Art. 2.2.9 PB - CADFEM GmbH CY - Grafing ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Bewertung der relevanten Einflussfaktoren auf die Gefügeumwandlungen und thermomechanischen Eigenschaften bei komplexen Temperaturbelastungen T2 - ANSYS Conference & 29. CADFEM Users' Meeting 2011, conference proceedings, 19. - 21. October 2011, Stuttgart, ICS N2 - Der Vortrag stellt die Identifizierung und Bewertung der relevanten Einflussfaktoren auf die Gefügeumwandlungen und auf die thermomechanischen Werkstoffkennwerte bei komplexen Temperaturbelastungen vor. Dies erfolgt durch physikalische Simulation der Gefüge in der WEZ von Mehrlagenschweißungen und Aufnahme von Dilatometerkurven und Spannungs-Dehnungskurven. Es wurden einflussarme Kombination von Temperaturzyklen und weitere mit starkem Einfluss auf die Gefügeumwandlung identifiziert. Hinweise zu den erforderlichen Werkstoffkennwerten für die numerische Schweißsimulation wurden gegeben. KW - Gefügeumwandlungen bei mehrmaliger Temperatureinwirkung KW - thermomechanische Eigenschaften KW - Simulation des Mehrlagenschweißens Y1 - 2011 UR - http://www.usersmeeting.com/rueckblick/acum-2011.html UR - http://www.cadfem.de/fileadmin/shop/um/ACUM2011-DVD-Inhaltsverzeichnis.pdf SN - 3-937523-08-1 PB - CADFEM GmbH CY - Grafing ER - TY - BOOK A1 - Michailov, Vesselin A1 - Karkhin, Victor A. A1 - Petrov, Peter T1 - Grundlagen der Schweißtechnik KW - Schweißverfahren KW - Physik des Schweißens KW - Temperaturfelder beim Schweißen KW - Metallurgie des Schweißens KW - Schweißverzüge und -eigenspannungen Y1 - 2012 SN - 978-954-90912-6-7 PB - Bauwesen CY - Sofia ER - TY - THES A1 - Ossenbrink, Ralf T1 - Thermomechanische Schweißsimulation unter Berücksichtigung von Gefügeumwandlungen KW - Schweißsimulation KW - Eigenspannung KW - Laserstrahlschweißen KW - STAAZ-Modell KW - Stahl KW - Umwandlungsplastizität KW - thermomechanische Werkstoffkennwerte Y1 - 2009 SN - 978-3-8322-8131-1 PB - Shaker CY - Aachen ER - TY - THES A1 - Deflorio, Andrea T1 - Distortion Simulation of Cylindrical Body Shape during Laser Beam Welding KW - Laser beam welding KW - welding simulation KW - residual stresses KW - distortions KW - simulation tool KW - material models Y1 - 2008 SN - 978-3-8322-7636-2 PB - Shaker CY - Aachen ER - TY - CHAP A1 - Sasse, Ina A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Welding of structured sheet metals with high power fiber laser T2 - Międzynarodowa Sesja Studencka, 30. Mai 2012, Częstochowa/Polen KW - structured sheet metals; laser welding Y1 - 2012 SN - 978-83-87745-69-1 SP - 285 EP - 290 CY - Częstochowa ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Material Properties of the HAZ of Multi-Pass Welded Joints from low alloyed Steel T2 - Junior Euromat 2012, Paperlist KW - material properties of the heat affected zone; multi-pass welds Y1 - 2012 UR - http://wiki.dgm.de/wwiki/wiki/Junior-Euromat%202012%20-%20Paperlist SP - A297 ER - TY - CHAP A1 - Ossenbrink, Ralf A1 - Brand, M. A1 - Michailov, Vesselin T1 - Numerische Simulation der Eigenspannungen und des Bauteilverzugs beim Schweißen mit Berücksichtigung des Umwandlungsverhaltens T2 - Große Schweißtechnische Tagung, Schweissen und Schneiden, 2003 KW - Laserstrahlschweißen; Eigenspannung; Verzug; numerische Simulation; thermomechanische Kennwerte Y1 - 2003 SN - 3-87155-683-1 SP - 279 EP - 283 PB - DVS-Verlag CY - Düsseldorf ER - TY - CHAP A1 - Brand, M. A1 - Petz, M. A1 - Tutsch, R. A1 - Wohlfahrt, Helmut A1 - Michailov, Vesselin T1 - Numerische Simulation und Verifikation des Bauteilverzugs beim Schweißen unter Verwendung optischer Feldmeßmethoden T2 - Conference proceedings, 21st CAD-FEM Users' Meeting 2003, International Congress on FEM Technology, 12. - 14. November 2003, im Hotel Dorint Sanssouci Berlin, Potsdam KW - Numerische Verzugssimulation; optische Feldmeßmethoden; Y1 - 2003 SN - 3-937523-00-6 N1 - Bericht 2.4.6 PB - CAD-FEM GmbH CY - Grafing bei München ER - TY - GEN A1 - Michailov, Vesselin A1 - Stadtaus, Marc T1 - Einige Probleme der FE-Simulation zur Wasserstoff- und Stickstoffverteilung beim Schweißen T2 - Zeitschrift für Metallkunde KW - Wasserstoff- und Stickstoffverteilung KW - FE-Simulation des Schweißens Y1 - 2001 SN - 0044-3093 VL - 92 IS - 3 SP - 247 EP - 252 ER - TY - GEN A1 - Zhang, Wei A1 - Doynov, Nikolay A1 - Wolf, Matthias A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Investigation of the Thermal Shock Behavior of Ceramic Using a Combination of Experimental Testing and FE-Simulation Methods T2 - Advanced engineering materials N2 - Thermal shock behavior of ceramics plays a decisive role in their broad industrial applications. For enhanced understanding of damage and failure mechanism under thermal shock loading, in the present work, a combination of experimental testing and numerical simulation methods has been used. The thermal shock behavior of the alumina (99.7%) disk samples has been investigated by using a plasma test stand: the bottom of the ceramic disks were locally heated in the center by plasma beam; during the heat treatment the temperature distribution at the top of the sample was recorded with a thermographic system. To characterize the thermal shock resistance, a thermomechanical simulation was subsequently carried out. It calculates the temperature and stress distribution within the ceramic disks. The calculated critical thermal tension stresses are reported, which led to the failure of the ceramic disks under thermal shock loading. The effect of the sample thickness on the temperature and stress distribution is presented. Compared with the experimental results the simulated results show excellent agreement. As conclusion, it is possible to determine the thermal shock behavior of ceramic materials by the combination of experimental testing and numerical simulation. KW - Thermal Shock Behavior KW - Ceramic KW - FE-Simulation KW - Experimental Testing Y1 - 2013 UR - http://www.aem-journal.com U6 - https://doi.org/10.1002/adem.201200241 SN - 1527-2648 VL - 15 IS - 6 SP - 480 EP - 484 ER - TY - CHAP A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Vorhersage der Härteverteilung beim Schweißen mit Hilfe der numerischen Simulation T2 - Conference proceedings, 21st CAD-FEM Users' Meeting 2003, International Congress on FEM Technology, 12. - 14. November 2003, im Hotel Dorint Sanssouci Berlin, Potsdam KW - Numerische Simulation KW - Härteverteilung beim Schweißen Y1 - 2003 SN - 3-937523-00-6 N1 - Bericht 2.4.3 PB - CAD-FEM GmbH CY - Grafing bei München ER - TY - CHAP A1 - Doynov, Nikolay A1 - Christov, St. A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Finite Elements Simulation of Multipass Submerged Arc Welding T2 - Mathematical Modelling of Weld Phenomena 6 KW - Multipass Submerged Arc Welding KW - Finite Elements Simulation Y1 - 2002 SN - 978-1-902653-56-3 SP - 651 EP - 669 PB - Maney – IOM CY - London ER - TY - CHAP A1 - Stadtaus, Marc A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Simulation of Weld Shape, Microstructure, Distortion and Residual Stresses for Laser Beam Welding T2 - Mathematical Modelling of Weld Phenomena 6 KW - Laser Beam Welding KW - Simulation of Weld Shape KW - Microstructure KW - Distortion and Residual Stresses Y1 - 2002 SN - 978-1-902653-56-3 SP - 419 EP - 442 PB - Maney – IOM CY - London ER - TY - CHAP A1 - Rethmeier, M. A1 - Stadtaus, Marc A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Numerical Calculation of Temperature Load and Distortion during Welding of Circumferential Weld Seams T2 - Mathematical Modelling of Weld Phenomena 6 KW - Numerical calculation of temperature load and distortion KW - Circumferential weld seams Y1 - 2002 SN - 978-1-902653-56-3 SP - 685 EP - 702 PB - Maney – IOM CY - London ER - TY - CHAP A1 - Stadtaus, Marc A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Berechnung von Nahtgeometrie, Gefüge, Verzug und Eigenspannungen beim Schmelzschweißen T2 - Schweißen und Schneiden 2001 KW - Berechnung von Nahtgeometrie KW - Gefügesimulation KW - Verzug und Eigenspannungen Y1 - 2001 SN - 978-3-87155-674-6 SP - 315 EP - 321 PB - DVS Verlag CY - Düsseldorf ER - TY - CHAP A1 - Röhrs, K. A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Einfluss von Beimengungen zum Schutzgas beim Lichtbogenschweißen von Aluminiumwerkstoffen T2 - Schweißen und Schneiden 2001 KW - Lichtbogenschweißen von Aluminiumwerkstoffen KW - Einfluss von Beimengungen zum Schutzgas Y1 - 2001 SN - 978-3-87155-674-6 SP - 349 EP - 354 PB - DVS Verlag CY - Düsseldorf ER - TY - CHAP A1 - Karkhin, Victor A. A1 - Levchenko, A. M. A1 - Homich, P. N. A1 - Michailov, Vesselin T1 - Computer-Aided Express Determination of Diffusible Hydrogen in Deposited Weld Metal T2 - International Conference on Total Welding Management in Industrial Applications, 3rd JOIN Conference, Lappeenranta, August 21 - 24, 2007 KW - diffusible Hydrogen KW - deposited weld metal Y1 - 2007 SN - 978-952-214-413-3 SP - 252 EP - 262 CY - Lappeenranta ER - TY - GEN A1 - Stadtaus, Marc A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Numerical calculation of the main factors on cold cracking T2 - Materialwissenschaften und Werkstofftechnik KW - cold cracks; finite‐element‐analysis; Kaltrisse Y1 - 2003 U6 - https://doi.org/10.1002/mawe.200390007 SN - 0933-5137 SN - 1521-4052 VL - 34 IS - 1 SP - 145 EP - 151 ER - TY - CHAP A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Numerische Simulation der Eigenspannungen und des Bauteilverzugs beim Schweißen unter Berücksichtigung der zeitlichen und örtlichen Änderung der Dehnrate T2 - Internationale FEM-Technologietage, 20th CAD-FEM Users' Meeting, 9-11 Oktober 2002, Friedrichshafen KW - Dehngeschwindigkeit KW - Dehngrenze KW - Eigenspannung KW - Laserstrahlschweißen KW - numerische Simulation KW - Verzug Y1 - 2002 N1 - Beitrag 2.8.4 PB - CAD-FEM GmbH CY - Grafing bei München ER - TY - GEN A1 - Kornienko, Elena A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Corrosion resistance of zinc-coated structured sheet metals T2 - Corrosion Science N2 - The purpose of this study is to characterise the corrosion behaviour of zinc-coated sheet metals after a structuring process using the salt spray test. The investigated structured material is manufactured by hydroforming and has a periodic hexagonal geometry. The corrosion behaviour has been evaluated by estimating the development of the corrosion area and penetration depth. The results of the investigation show that the corrosion area is larger on the smooth sheet than on the structured sheet. The difference between the structured and smooth sheets is negligible with increasing exposure time. Furthermore, the reasons for the different corrosion behaviours are discussed. KW - Corrosion KW - structur sheet metals Y1 - 2013 UR - http://www.sciencedirect.com/science/article/pii/S0010938X12006233 SN - 0010-938X VL - Vol. 69 SP - 270 EP - 280 ER - TY - CHAP A1 - Ossenbrink, Ralf A1 - Doynov, Nikolay A1 - Michailov, Vesselin T1 - Welding simulation of aluminium to steel joints by means of arc welding Processes T2 - 10th International Scientific and Technical Conference, Advanced metal materials and technologies (AMMT’2013), June 25–29, Saint Petersburg, 2013 N2 - The object of the present work is the introduction of a welding simulation approach for aluminium to steel welded joints which are realised by short-arc welding. The study is carried out with special emphasis on the simulation of temperature field by means of conduction solution, on the applicability of different metallurgical models as well as the aspects of the mechanical simulation of the residual welding stresses and distortions. As result an approved heat source model is suggested and the calibration parameters are presented. For the modelling of the microstructure and corresponding thermomechanical material properties in the heat affected zone different material models are validated. They are used to simulate the welding residual stresses and distortions. Furthermore, the welding simulation of a real component as well as a simulation study of different welding scenarios is presented. KW - Welding simulation; aluminium steel; welding Processes Y1 - 2013 SP - 523 EP - 528 PB - Izdat. Polytechn. Univ. CY - Saint Petersburg, Russia ER - TY - GEN A1 - Voß, O. A1 - Michailov, Vesselin A1 - Decker, I. T1 - Erweiterung der numerischen Schweißsimulation zur Untersuchung metallkundlicher Fragestellungen T2 - Zeitschrift für Metallkunde KW - numerische Schweißsimulation,Gefügeumwandlungen,Werkstoffkennwerte Y1 - 2001 SN - 0044-3093 VL - 92 IS - 3 SP - 293 EP - 299 ER - TY - GEN A1 - Thomas, Karl A1 - Michailov, Vesselin A1 - Wohlfahrt, Helmut T1 - Zähigkeitsuntersuchungen an schmalen Verfahrenseinflusszonen pressstumpfgeschweißter Stähle T2 - Schweißen und Schneiden KW - Zähigkeitsuntersuchungen KW - Pressstumpschweißung Y1 - 2000 VL - 52 IS - 12 SP - 734 EP - 745 ER - TY - THES A1 - Stadtaus, Marc T1 - FE-Simulation der Verteilung von Wasserstoff und Stickstoff in Schweißverbindungen KW - FE-Simulation, Kaltrisse, Stickstoffverteilung Y1 - 2014 UR - http://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-2537-8 SN - 978-3-8440-2537-8 PB - Shaker Verlag CY - Aachen ER - TY - CHAP A1 - Ossenbrink, Ralf A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay ED - Michailov, Vesselin T1 - Simulation der Schweißeigenspannungen und des -verzuges unter Berücksichtigung der Gefügeumwandlungen mit dem STAAZ-Modell T2 - Internationales Symposium Schweißtechnik - Verfahren, Werkstoffe, Simulation, Cottbus, 6. November 2013 N2 - Die vorliegende Arbeit stellt das von Professor Michailov vorgeschlagene Spitzentemperatur-Austenitisierungs- Abkühlzeit-Modell für die thermomechanische Schweißsimulation unter Berücksichtigung der Gefügeumwandlungen vor. Das Modell erfasst die für die Gefügeausbildung maßgebenden Temperaturzyklen durch seine drei so genannten STAAZ-Parameter: Spitzentemperatur, Austenitisierungs- und Abkühlzeit. Die Korrelation dieser Temperaturzyklusparameter mit den thermomechanischen gefügeabhängigen Werkstoffeigenschaften erfolgt auf Grundlage einer empirischen Datenbasis. Mit der vorgenommenen Erweiterung zu Mehrmalig-(M-)STAAZ lässt sich das aus einem vorgelagerten Temperaturzyklus entstandene Zwischengefüge berücksichtigen. KW - Schweißsimulation; STAAZ-Modell ; thermomechanische Werkstoffkennwerte ; Mehrlagenschweißungen Y1 - 2013 SN - 978-3-8440-2319-0 SP - 149 EP - 167 PB - Shaker Verlag CY - Aachen ER - TY - THES A1 - Kornienko, Elena T1 - Einfluss der Beschichtung und des Schweißens auf das Korrosionsverhalten von strukturierten Blechen KW - Korrosion; Korrosionsschutz; Beschichtung; Schweißen; strukturiertes Blech Y1 - 2014 SN - 978-3-8440-3087-7 PB - Shaker CY - Aachen ER - TY - THES A1 - Sasse, Ina T1 - Schneiden und Schweißen strukturierter Bleche mit Faserlaser KW - Laserstrahlschneiden; Laserstrahlschweißen; Forschung und Entwicklung; Fügetechnik Y1 - 2014 SN - 978-3-8440-3035-8 PB - Shaker CY - Aachen ER - TY - THES A1 - Kapp, Mirjam T1 - Untersuchung der Einflussfaktoren auf die Kaltrissanfälligkeit niedriglegierter Stähle beim Laserstrahlschweißen an zylindrischen Bauteilen KW - Laserstrahlschweißen; Schweißsimulation; Finite-Elemente-Methode; Eigenspannungen; Werkstoffdaten; Kaltrisse Y1 - 2014 SN - 978-3-8440-3452-3 PB - Shaker CY - Aachen ER - TY - THES A1 - Dreibati, Ossama T1 - Physical welding simulation of the cold crack susceptibility KW - Cold Crack; hydrogen embrittlement; Cold crack criterion; High strength steel Y1 - 2014 SN - 978-3-8440-3133-1 PB - Shaker CY - Aachen ER - TY - GEN ED - Michailov, Vesselin ED - Ossenbrink, Ralf ED - Doynov, Nikolay T1 - Internationales Symposium Schweißtechnik - Verfahren, Werkstoffe, Simulation : 6. November 2013 T1 - International Symposium Welding Technology - Processes, Materials, Simulation : 6. November 2013 KW - Schweißsimulation; Schweißtechnik;Schweißverfahren Y1 - 2013 SN - 978-3-8440-2319-0 PB - Shaker CY - Aachen ER - TY - THES A1 - Stapelfeld, Christoph T1 - Vereinfachte Modelle zur Schweißverzugsberechnung N2 - Joining by means of welding has a vital importance in many sectors of industry. However, the uneven heating of the welded structure results in unwanted distortions, which has to be removed by cost-intensive after treatments. Knowing the welding distortions in an early stage of the product development cycle enables taking countermeasures or define after treatments, already in the product planning. The aim of this research study is the development and implementation of an analytic numerical hybrid model for the distortion calculation of large welded structures. The basis of the hybrid model is the analytical shrinkage force model, which is upgraded for modern welding processes and new materials. By means of experimental as well as numerical investigations, the instability of thin walled structures during welding is reviewed and a possibility for capturing is proposed. The linking of the analytical and the numerical method opens up the possibility for calculating the distortions caused by curved trajectories. To simplify the application of the hybrid model, a software will be programmed, including the complex mathematical approach of the shrinkage force model. It determines the mechanical loads, depending on the geometry of the welded structure, material data and weld parameters. The verification of the program as well as the coupling procedure is done on butt joints. The same welded structures are used for the investigation of the stability and the sensibility of the hybrid model afterwards. Finally the hybrid model will be applied to welded structures of different complexity and the results will be compared with experimental measurements. At the beginning butt and T-joints are determined, followed by the distortion calculation of a evaluation model made up of 8 welds. At the end an entire section of a ship deck, whereupon different elements are assembled by about 90 welds on a 20x16 meter large ground plate, is estimated. N2 - Dem Fügen mittels Schweißen kommt in vielen Industriezweigen eine zentrale Bedeutung zu. Durch die ungleichmäßige Erwärmung der Schweißverbindung kommt es jedoch zu unerwünschten Verformungen, die durch kostenintensive Nachbehandlungen beseitigt werden müssen. Ist der bleibende Schweißverzug bereits in einem frühen Stadium des Produktentwicklungszyklus bekannt, können geeignete Gegenmaßnahmen ergriffen oder Nachbehandlungen bereits in der Produktplanung festgelegt werden. Das Kernziel dieser Arbeit ist die Entwicklung und Umsetzung eines gekoppelten analytisch numerischen Hybridmodells für die Schweißverzugsberechnung von Großstrukturen. Die Basis hierfür liefert das Schrumpfkraftmodell, welches um moderne Schweißverfahren und neue Werkstoffe erweitert wird. Sowohl experimentell als auch mittels numerischer Analysen wird die Instabilität dünnwandiger Strukturen untersucht und eine mögliche Erfassung im Schrumpfkraftmodell vorgeschlagen. Durch die analytisch numerische Kopplung stellt auch die Berechnung der Verzüge, hervorgerufen durch krummlinig wandernde W\"armequellen keine Hürde mehr dar und wird implementiert. Um die Anwendung des Hybridmodells zu vereinfachen, wird ein Programm entwickelt, welches die umfangreiche mathematische Vorgehensweise des Schrumpfkraftmodells beinhaltet und aufgrund der Geometrie der Schweißverbindung, des Werkstoffs und der Schweißparameter die mechanischen Lasten berechnet. Die Verifizierung der Software, des Kopplungsalgorithmus sowie die Untersuchung der Stabilität und Sensibilität des Hybridmodells erfolgt an Stumpfstoßverbindungen. Abschließend wird das Modell an unterschiedlich komplexen Schweißkonstruktionen angewandt und die berechneten Schweißverzüge mit experimentellen Messungen verglichen. Eingangs werden einfache I- und T-Stoßverbindungen betrachtet. Es folgt die Verzugsberechnung eines Demonstrators aus dem Schiffbau mit 8 Schweißnähten sowie einer gesamten Decksektion mit ca. 90 Nähten, wobei verschiedene Elemente auf eine Grundplatte von 20x16 Metern gefügt werden. KW - Schweißen KW - Schweißverzug KW - Schrumpfkraftmodell KW - Weld Distortion KW - shrinkage force Y1 - 2016 SN - 978-3-8440-4142-2 PB - Shaker Verlag GmbH CY - Aachen ER - TY - GEN A1 - Sasse, Ina A1 - Schleuß, Leander A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Joining of structured sheet metals - Remote laser beam welding in comparison with resistance spot welding T2 - Welding and Cutting N2 - One main problem of thin-walled, large-area sheet components for lightweight construction solutions is the inadequate stiffness. One approach for a solution is provided by structured sheet metals which have an increased flexural stiffness due to three-dimensionally incorporated structures. The areas of application of the structured sheet metals (e.g. in subassemblies in automobile, rail vehicle and tank construction) necessitate adapted welding technologies. Since few systematic investigations have been conducted on structured sheet metals in the field of joining technology until now, there is a lack of knowledge about the further processing of these sheets by means of welding technology. The aims of the presented investigations are to make it possible to utilise these modern semi-finished products industrially using remote laser beam welding and to compare this with resistance spot welding. Both are important joining processes in the areas of applications interesting for structured sheet metals and thus constitute key technologies for industrial utilisation. Resistance spot welding has already been qualified for utilisation on structured sheet metals [1]. In addition, investigations were conducted into the remote laser beam welding of structured and flat sheets. These investigations encompass the possibilities of joining structured and flat joining members by means of remote laser beam welding as well as the assessment of the joint strength in tensile shear and peel tests. Thereafter, the results of the investigations are compared with the resistance spot welding of structured sheet metals and specific application recommendations are derived. KW - structured metals sheet KW - Remote laser beam welding KW - resistance spot welding Y1 - 2014 VL - 13 IS - 1 SP - 43 EP - 47 ER - TY - CHAP A1 - Sasse, Ina A1 - Schleuß, Leander A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Fügen strukturierter Bleche - Remote-Laserstrahlschweißen im Vergleich zum Widerstandspunktschweißen T2 - DVS Congress 2013, Große Schweißtechnische Tagung, DVS-Studentenkongress KW - strukturierte Bleche; Remote; Laserstrahlschweißen; Widerstandspunktschweißen Y1 - 2013 SN - 978-3-87155-614-2 SP - 98 EP - 103 PB - DVS-Verlag CY - Düsseldorf ER - TY - GEN A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Quantification of cold cracking parameters of high strength steels by physical simulation under welding conditions T2 - Quarterly journal of the Japan Welding Society N2 - Cold cracks in welds are the result of the formation of brittle microstructure as martensite in the presence of diffusible hydrogen as well as of tensile stresses. Cold cracks occur when the combination of cold crack influence parameters (CCIP) overcomes a critical limit. In this study, critical combinations of CCIP were identified with an enhanced test procedure under welding conditions. The test is based on the physical simulation technique of heat affected zone (HAZ) and it is carried out using the test and simulation center Gleeble 3500. Thereby, laboratory special specimens are charged with hydrogen from pure hydrogen atmosphere in the initial stage of the test. Rigidly restraint specimen section is subjected to different weld temperature cycles. Through the thermal exposure, the desired microstructure of HAZ is set in the test zone of the restraint specimen section. A plastic deformation takes place owing to the prevented expansion during heating and contraction of the specimen during cooling. Consequently, compressive or tensile reactions stresses arise in the deformed zone. Cracked specimen represents a critical combination of the CCIP. The quantitative cold crack criterion separates the cold crack susceptible combinations from those non susceptible. KW - Cold Cracking KW - Physical Simulation KW - High Strength Steel Y1 - 2013 U6 - https://doi.org/10.2207/qjjws.31.148s SN - 0288-4771 VL - 31 IS - 4 SP - 148 EP - 152 ER - TY - GEN A1 - Michailov, Vesselin A1 - Dreibati, Ossama A1 - Ossenbrink, Ralf A1 - Schweizer, Frank T1 - Rechnergestützte Vorhersage der Kaltrissneigung laserstrahlgeschweißter Bauteile aus hochfesten Stählen - Teil 1 T2 - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren KW - Kaltriss KW - hochfeste Stähle KW - laserstrahlgeschweißte Bauteile Y1 - 2013 SN - 0036-7184 VL - 65 IS - 11 SP - 776 EP - 781 ER - TY - CHAP A1 - Schleuß, Leander A1 - Seidlitz, Holger A1 - Fritzsche, Sebastian A1 - Schulze, Marcus A1 - Michailov, Vesselin A1 - Schuhmann, Tilo T1 - Gewichtsreduzierte Multi-Material-Bauweisen mit Organoblechen T2 - Tagungsband, 15. Chemnitzer Textiltechnik-Tagung, Chemnitz, Germany, 31.05-01.06.2016 Y1 - 2016 SN - 978-3-945479-06-3 SP - 112 EP - 119 PB - Technische Universität Chemnitz, Professur Fördertechnik CY - Chemnitz ER - TY - RPRT A1 - Schleuß, Leander A1 - Brobeck, Andreas F. W. A1 - Ossenbrink, Ralf A1 - Polzin, Ralf A1 - Michailov, Vesselin T1 - Rollennahtschweißen strukturierter Feinbleche N2 - Strukturierte Bleche besitzen eine dreidimensionale Struktur aus regelmäßig angeordneten Versteifungselementen, welche die Steifigkeit der Bleche global erhöhen. Neben der Steifigkeitserhöhung besitzen strukturierte Bleche eine vergrößerte Oberfläche, ein verändertes akustisches Verhalten sowie ein ansprechendes Design als positive Merkmale. Mit der Qualifizierung des Rollennahtschweißens für verzugsarme, mediendichte Schweißnähte erschließen sich neue wichtige industrielle Anwendungen für strukturierte Bleche und den daraus hergestellten mehrschaligen Bauelementen (zwei strukturierte Bleche im Parallelstoß) mit Hohlräumen zwischen den Blechen. Innovative Produktentwicklungen in der Wärmetechnik, im Transportwesen und im Bauwesen können mit strukturierten Blechen für Rekuperatoren, Lüftungsanlagen, Wärmeboxen, chemische Apparate, temperierbare Behälter sowie Fußbodenheizungen, Kühlräume, Klimakammern, Fassadenelemente oder Lärmschutzwände umgesetzt werden. Derzeit steht dazu kein geeignetes Fügeverfahren zur Verfügung, welches alle Anforderungen erfüllt. Das Rollennahtschweißen eignet sich, strukturierte Bleche so zu fügen, dass sie den Anforderungen der zukünftigen Einsatzbereiche entsprechen unter Erhalt der positiven Eigenschaften. In diesem Projekt wurden strukturierte Einzelbleche und der aus ihnen gefertigten mehrschaligen Bauelemente mit dem Rollennahtschweißen gefügt. Zur Herstellung der mehrschaligen Bauelemente wurden Rollpunktnähte genutzt, welche strukturerhaltend hergestellt wurden. Dazu sind neuartige Rollennahtelektroden entwickelt, gefertigt und erprobt worden. Die notwendigen Schweißparameter zum strukturerhaltenden Schweißen und zum Schweißen mit Verformung der Struktur wurden in schweißbereichsdiagrammen dokumentiert und die Verbindungseigenschaften durch Zugversuche und Metallografie qualifiziert. Für die genannten Anwendungsbereiche wurden Dichtnähte an den Randbereichen der Bleche hergestellt. Durch die Überprüfung der Dichtheit, der Druck- und Korrosionsbeständigkeit wurden die mehrschaligen Bauelemente für mögliche Anwender qualifiziert. Für die durchgeführten Recherchen und Untersuchungen wurde ein wissenschaftlicher Mitarbeiter in Vollzeit beschäftigt und durch eine studentische Hilfskraft, sowie einen Techniker unterstützt. Die geleistete Arbeit entspricht im vollen Umfang dem begutachteten und bewilligten Antrag und war für die Durchführung des Vorhabens notwendig und angemessen. KW - Rollennahtschweißen KW - strukturiert KW - neuartig KW - Elektrodengeometrie KW - Leichtbauelement KW - mehrschalig KW - durchströmbar KW - Kühlmedien Y1 - 2015 PB - BTU, Lehrstuhl Füge- und Schweißtechnik CY - Cottbus-Senftenberg ER - TY - CHAP A1 - Schleuß, Leander A1 - Brobeck, Andreas F. W. A1 - Ossenbrink, Ralf A1 - Polzin, Ralf A1 - Michailov, Vesselin T1 - Neuartige Elektroden zum Rollennahtschweißen mit nichtlinearem Schweißpfad T2 - Große Schweißtechnische Tagung, 15.-17.09.15 N2 - Beim Rollennahtschweißen von Blechen mit eingebrachten Versteifungselementen wie Sicken oder regelmäßig angeordneten Strukturen führen lineare Schweißpfade unter Verwendung klassischer Rollenelektroden zur teilweisen bzw. vollständigen Einebnung dieser Versteifungselemente. Dadurch kann die positive Wirkung der Versteifungselemente reduziert bzw. vollständig aufgehoben werden. Somit müssen neue Wege für das Rollennahtschweißen von gesickten oder strukturierten Blechen erarbeitet werden. Es wurden zwei neuartige Elektroden mit veränderten Geometrien an den Kontaktflächen entwickelt, welche die Topologie der Bleche berücksichtigen und eine Einebnung vermeiden. Eine der Elektroden besitzt eine periodisch unterbrochene Kontaktfläche, die zweite eine laterale Profilierung mit in Schweißrichtung nichtlinearer Form der Kontaktfläche. Das Verhalten beim Schweißen wurde durch Schweißversuche bestimmt. Es wurden Schweißbereichsdiagramme bzw. Prozessfenster abgeleitet. Die Verbindungseigenschaften wurden durch Metallografie-, Festigkeits-, Druck- und Dichtheitsuntersuchungen validiert. Als Vergleich und Referenz dienen Schweißuntersuchungen mit konventionellen Rollennahtelektroden. Die geschweißten Bleche haben Wabenstrukturen als regelmäßig angeordnete Versteifungselemente mit unterschiedlichen Elementtiefen. Diese Bleche finden vorrangig Anwendung im Fahrzeugbau, in der Investitionsgüterindustrie und im Bauwesen. Aufgrund dieser Branchen und für zukünftige Anwendungen im Wärmetauscher- und Behälterbau sowie zur Ermittlung grundlegender Kenntnisse wurden die Untersuchungen an Werkstoffqualitäten DC04 und 1.4301 mit Blechdicken von 0,5 mm und 0,7 mm durchgeführt. Die Untersuchungsergebnisse zeigen Unterschiede bei den Prozessparametern und der Ausprägung der Verbindung in Abhängigkeit von der geschweißten Struktur, dem ausgewählten Schweißpfad und des geschweißten Werkstoffes gegenüber den Referenzschweißungen. Eine anschließende Optimierung führte zu einer vergleichbar guten Schweißnahtqualität sowohl bei Erhalt der Versteifungselemente mit den neuen Elektroden als auch bei deren Einebnung mit konventionellen Elektroden in Referenz zu Schweißuntersuchungen am ebenen Blech. KW - Rollennahtschweißen KW - Leichtbauelement KW - durchströmbar KW - neuartig KW - Elektrodengeometrie KW - strukturiert Y1 - 2015 SN - 978-3-945023-46-4 SP - 185 EP - 190 PB - DVS Media CY - Düsseldorf ER - TY - CHAP A1 - Schleuß, Leander A1 - Brobeck, Andreas F. W. A1 - Ossenbrink, Ralf A1 - Polzin, Ralf A1 - Michailov, Vesselin T1 - Rollennahtschweißen strukturierter Bleche mit neuartigen Elektroden T2 - Widerstandsschweißen, 23. Sondertagung in Duisburg am 29. und 30. Juni 2016 N2 - Bleche mit regelmäßig angeordneten steifigkeitserhöhenden Strukturen werden zunehmend in Kon-struktionen zur Erhöhung der Steifigkeit dünner Bleche bzw. von kompletten Bauteilen verwendet. Damit diese Bauteile wirtschaftlich verarbeitet werden können, bietet das Rollennahtschweißen mit seinen hohen Prozessgeschwindigkeiten und ohne notwendigen Einsatz von Zusatzwerkstoffen bzw. Schweißhilfsstoffen eine kostengünstige Alternative zu anderen Verfahren. Beim Rollennahtschweißen strukturierter Bleche führen jedoch klassische Rollennahtelektroden zur teilweisen bzw. vollständigen Einebnung der Versteifungselemente, sodass deren positive Wirkung reduziert bzw. vollständig auf-gehoben werden kann. Die geschweißten Bleche haben Wabenstrukturen mit unterschiedlichen Elementtiefen als regelmäßig angeordnete Versteifungselemente. Die Bleche finden vorrangig Anwendung im Fahrzeugbau und im Bauwesen. Aufgrund dieser Branchen und für zukünftige Anwendungen im Wärmetauscher- und Behäl-terbau wurden die Untersuchungen an Werkstoffqualitäten DC04 und X5CrNi 18-10 mit Blechdicken von 0,5 mm und 0,7 mm durchgeführt. Die entwickelten neuartigen Elektroden berücksichtigen die Topologie der Bleche, um eine Einebnung der strukturierten Bleche zu vermeiden. Daher wurden Elektroden mit veränderten Geometrien an den Elektrodenarbeitsflächen gestaltet. Eine der Elektroden besitzt eine periodisch unterbrochene und die zweite eine laterale Profilierung mit in Schweißrichtung nichtlinearer Form der Elektrodenarbeitsfläche. Das Verhalten beim Schweißen wurde in Schweißversuchen bestimmt und Schweißbereichsdiagram-me bzw. Prozessfenster abgeleitet. Die Verbindungseigenschaften wurden durch Metallografie-, Fes-tigkeits-, Druck- und Dichtheitsuntersuchungen validiert. Als Vergleich und Referenz dienen Schweiß-untersuchungen mit konventionellen Rollennahtelektroden. Die Untersuchungsergebnisse zeigen Unterschiede bei den Prozessparametern und der Ausprägung der Verbindung in Abhängigkeit von der geschweißten Struktur, dem ausgewählten Schweißpfad und des geschweißten Werkstoffes gegenüber den Referenzschweißungen. Eine anschließende Optimie-rung führte zu einer vergleichbar guten Schweißnahtqualität sowohl bei Erhalt der Versteifungselemen-te mit den neuen Elektroden als auch bei deren Einebnung mit konventionellen Elektroden in Referenz zu Schweißuntersuchungen am ebenen Blech. Anschließend wurde ein Vergleich der Verbindungsfestigkeiten mit dem Widerstandspunktschweißen und dem Metall-Aktivgas-Schweißen durchgeführt. KW - Rollennahtschweißen KW - Leichtbauelement KW - durchströmbar KW - neuartig KW - Elektrodengeometrie KW - Wärmetauscher Y1 - 2016 SN - 978-3-945023-75-4 SP - 230 EP - 240 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Schleuß, Leander A1 - Springer, Katrin A1 - Zoeke, Jörg A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Qualifizierung von wärmearmen MSG-Schweißverfahren für Leichtbaukonstruktionen mit strukturierten Halbzeugen T2 - Internationaler Fachkongress der Schweiß- und Verbindungstechnik Join-Ex 2012 Wien, 10. + 11. Oktober 2012, Congress Center der Messe Wien KW - wärmearm KW - Schweißen KW - strukturiert KW - Steifigkeitserhöhung KW - Hochgeschwindigkeitsaufnahme KW - Temperaturzyklen Y1 - 2012 SP - 75 EP - 83 PB - Schweißtechnische Zentralanstalt e.V. CY - Wien ER - TY - GEN A1 - Kazak, Fedor A1 - Schleuß, Leander A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin A1 - Weiß, Sabine T1 - Particularities of testing structured sheet metals in 3-point bending tests T2 - Materials Testing N2 - Thin sheet metals from deep drawing steel DC04 are very often used in the production of car body and case parts. Quality improvement of sheet metal components by new constructive solutions (structuring) as well as adapted joining technology is going on. Structured sheet metals differ from each other by their high bending stiffness. At the same time, they show certain anisotropy due to the structure. Therefore a typical testing method of structured semi-finished parts (single sheet metals, sandwiches)is the bending test. The literature review revealed that in many studies no special demands on tests of structured materials were made. This concerns particularly the structure arrangement, structure direction and structure location of the specimen relative to the mandrel position during bending tests, i. e., the direction of the fixed load relative to the structure. The aim of this study was to determine the influence of the test specification on flexural behavior. In the present paper, honeycomb-structured sheet metals were examined using 3-point bending tests. Bending stiffness and lightweight potential were calculated with respect to the location of load application and compared for different structure arrangements,directions and locations. The influence of the anisotropy on flexural behavior of the honeycomb-patterned sheet metals was moderate. Y1 - 2016 U6 - https://doi.org/10.3139/120.110883 SN - 0025-5300 SN - 2195-8572 VL - 58 IS - 6 SP - 495 EP - 500 ER - TY - CHAP A1 - Haase, Florian Vincent A1 - Reinhold, Maximilian A1 - Woll, Ralf A1 - Wolf, Matthias A1 - Seidlitz, Holger ED - Walls, Lesley ED - Revie, Matthew ED - Bedford, Tim T1 - Reliability capability assessment of cooperative networks using the example of developing demonstrators of structured materials T2 - Risk, Reliability and Safety: Innovating Theory and Practice, Proceedings of the ESREL 2016, Glasgow (United Kingdom) Y1 - 2016 SN - 978-1-138-02997-2 SP - 1323 EP - 1329 PB - CRC Press CY - Boca Raton ER - TY - GEN A1 - Zhang, Wei A1 - Melcher, Reinhold A1 - Travitzky, Nahum A1 - Greil, Peter T1 - Three-Dimensional Printing of Complex-Shaped Alumina/Glas Composites T2 - Advanced engineering materials Y1 - 2009 U6 - https://doi.org/10.1002/adem.200900213 SN - 1527-2648 VL - 11 IS - 12 SP - 1039 EP - 1043 ER - TY - CHAP A1 - Cypris, Jochen A1 - Weclas, Miroslaw A1 - Greil, Peter A1 - Schlier, Lorenz M. A1 - Travitzky, Nahum A1 - Zhang, Wei T1 - Application of macro-cellular SiC reactor to diesel engine-like injection and combustion conditions T2 - Porous Media and its Applications in Science, Engineering, and Industry: Fourth International Conference, Potsdam, Germany, 17-22 June 2012 KW - Three-dimensional printing, Macro-cellular SiSiC, complex shaped ceramic composites Y1 - 2012 SN - 978-0-7354-1053-4 U6 - https://doi.org/10.1063/1.4711197 SP - 341 EP - 346 PB - AIP, American Inst. of Physics CY - Melville, NY ER - TY - GEN A1 - Schlier, Lorenz M. A1 - Zhang, Wei A1 - Travitzky, Nahum A1 - Greil, Peter A1 - Cypris, Jochen A1 - Weclas, Miroslaw T1 - Macro-Cellular Silicon carbide Reactors for Nonstationary Combustion Under Piston Engine-Like Conditions T2 - International Journal of Applied Ceramic Technology KW - Three-dimensional printing KW - Macro-cellular SISIC KW - Complex shaped ceramic composites Y1 - 2011 U6 - https://doi.org/10.1111/j.1744-7402.2010.02591.x SN - 1744-7402 VL - 8 IS - 5 SP - 1237 EP - 1245 ER - TY - GEN A1 - Zhang, Wei A1 - Travitzky, Nahum A1 - Hu, Chunfeng A1 - Zhou, Yanchun A1 - Greil, Peter T1 - Reactive Hot Pressing and Properties of Nb2AlC T2 - Journal of the American Ceramic Society KW - MAX phases KW - Ceramic KW - Reactive Hot Pressing Y1 - 2009 U6 - https://doi.org/10.1111/j.1551-2916.2009.03187.x SN - 1551-2916 SN - 0002-7820 VL - 92 IS - 10 SP - 2396 EP - 2399 ER - TY - GEN A1 - Zhang, Wei A1 - Travitzky, Nahum A1 - Greil, Peter T1 - Formation of NbAl3/Al2O3 Composites by pressureless reactive Infiltration T2 - Journal of the American Ceramic Society KW - NbAl3/Al2O3 Composites KW - Pressing and three-dimensional printing KW - Reactive Infiltration Y1 - 2008 U6 - https://doi.org/10.1111/j.1551-2916.2008.02583.x SN - 1551-2916 SN - 0002-7820 VL - 91 IS - 9 SP - 3117 EP - 3120 ER - TY - GEN A1 - Melcher, Reinhold A1 - Zhang, Wei A1 - Travitzky, Nahum A1 - Greil, Peter T1 - 3D-Printing of Al2O3/Cu-O Composites T2 - Ceramic Forum international KW - Al2O3/Cu-O Composites KW - Pressureless Infiltration KW - 3D-Printing Y1 - 2006 SN - 0173-9913 VL - 83 IS - 13 SP - 18 EP - 22 ER - TY - GEN A1 - Jakobsen, Daniel A1 - Zhang, Wei A1 - Doynov, Nikolay A1 - Böhm, Anna A1 - Malzbender, Jürgen A1 - Michailov, Vesselin A1 - Roosen, Andreas T1 - Thermal shock behaviour of laminated multilayer refractories for steel casting applications reinforced by residual stresses T2 - Ceramics International Y1 - 2016 U6 - https://doi.org/10.1016/j.ceramint.2016.05.149 SN - 0272-8842 VL - 42 IS - 12 SP - 13562 EP - 13571 ER - TY - GEN A1 - Zhang, Wei A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Physical and FE-Simulation of Thermal Shock Behaviour of Refractory Ceramics T2 - refractories WORLDFORUM Y1 - 2016 SN - 1868-2405 VL - 8 IS - 2 SP - 110 EP - 117 ER - TY - CHAP A1 - Zhang, Wei A1 - Priefer, Marian A1 - Olenina, Mariia A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Additive manufacturing by laser beam build-up welding T2 - 6th International Conference on Additive Technologies - iCAT 2016, Nürnberg, Germany, 29. - 30. November 2016 Y1 - 2016 SN - 978-961-285-537-6 SP - 324 EP - 327 ER - TY - CHAP A1 - Zhang, Wei A1 - Schramm, Maximilian A1 - Kaneneks, Michael A1 - Michailov, Vesselin A1 - Fleischhauer, Matthias T1 - Laserstrahl-Auftragschweißen mit pulverförmigen keramischen und metallischen Zusatzwerkstoffen zur Herstellung von Gradientenwerkstoffen T2 - Große Schweißtechnische Tagung, Nürnberg, 15. - 17. September 2015 Y1 - 2015 SN - 978-3-945023-46-4 SP - 842 EP - 845 PB - DVS Media CY - Düsseldorf ER - TY - CHAP A1 - Zhang, Wei A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin A1 - Scheithauer, Uwe A1 - Michaelis, Alexander T1 - Investigation of thermal shock behaviour of refractory ceramics based on the calcium-aluminate T2 - 14th Biennial Worldwide Congress Unified International Technical Conference on Refractories (UNITECR) 2015, Vienna, Austria, September 15-18, 2015 Y1 - 2015 SN - 978-3-9815813-1-7 CY - Hannover ER - TY - GEN A1 - Atanga, Valetine Kubong A1 - Zhang, Wei A1 - Dreibati, Ossama A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin A1 - Scheffler, Michael T1 - Alumina-mullite Materials for Refractory Applications: Microstructure, Physical and Finite Element Simulation of Thermal Shock Behaviour T2 - refractories WORLDFORUM Y1 - 2012 SN - 1868-2405 VL - 4 IS - 1 SP - 159 EP - 164 ER - TY - GEN A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Boywitt, Ralf A1 - Risse, Steffen A1 - Paulinus, Dietmar T1 - Utilisation of aluminium foam sandwich components in welded structures T2 - Welding and Cutting Y1 - 2016 SN - 1612-3433 IS - 5 SP - 317 EP - 325 ER - TY - GEN A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Boywitt, Ralf A1 - Risse, Steffen A1 - Paulinus, Dietmar T1 - Einsatz von Aluminiumschaum-Sandwich-Bauteilen in Schweißkonstruktionen T2 - Schweissen und Scheiden Y1 - 2016 SN - 0036-7184 VL - 68 IS - 3 SP - 106 EP - 114 ER - TY - GEN A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Modelling the Local Microstructure Properties due to Multi-Pass Welding T2 - Materials Science Forum Y1 - 2017 U6 - https://doi.org/10.4028/www.scientific.net/MSF.879.595 SN - 0255-5476 SN - 1662-9752 N1 - International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, May 29 - June 3, 2016 Graz, Austria VL - Vol. 879 SP - 595 EP - 600 ER - TY - GEN A1 - Michailov, Vesselin A1 - Doynov, Nikolay T1 - Analytical-Numerical Modeling Approach for Calculation of the Structural Distortions after Welding and Thermal Straightening T2 - Journal of Mechanics Engineering and Automation Y1 - 2016 U6 - https://doi.org/10.17265/2159-5275/2016.05.004 SN - 2159-5283 SN - 2159-5275 VL - 6 IS - 5 SP - 246 EP - 253 ER - TY - CHAP A1 - Doynov, Nikolay T1 - Anwendungsnahe Simulation des thermischen Richtens T2 - Schweißen in der Maritimen Technik und im Ingenieurbau, 16. Tagung, 20./21. April 2016 in Hamburg Y1 - 2016 SP - 78 EP - 88 PB - GSI SLV Nord CY - Hamburg ER - TY - CHAP A1 - Hantelmann, Cord A1 - Fritzsche, Sebastian A1 - Michailov, Vesselin A1 - Paulinus, Dietmar T1 - Einsatz von Aluminiumschaumsandwich in Schweißkonstruktionen T2 - DVS Congress 2014, Große Schweißtechnische Tagung, DVS-Studentenkongress, Vorträge der Veranstaltungen in Berlin am 15. und 16. September 2014 Y1 - 2014 SN - 978-3-945023-03-7 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Seidlitz, Holger A1 - Fritzsche, Sebastian A1 - Schleuß, Leander A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Neuartige Fügetechnologie zum Herstellen von hochbelastbaren Multi-Material-Bauweisen aus textilverstärkten Kunststoffen und Metallen bei einseitiger Zugänglichkeit der Fügestelle T2 - DVS Congress 2016, Große Schweißtechnische Tagung, Vorträge der Veranstaltungen in Leipzig am 19. und 20. September 2016 Y1 - 2016 SN - 978-3-945023-74-7 SP - 424 EP - 428 PB - DVS-Verlag CY - Düsseldorf ER - TY - GEN A1 - Koltsova, Tatiana S. A1 - Michailov, Vesselin T1 - Hybrid Composite Materials Aluminum-Carbon Nanostructures T2 - Materials science medziagotyra Y1 - 2015 SN - 1392-1320 SN - 2029–7289 VL - 21 IS - 3 SP - 372 EP - 375 ER - TY - GEN A1 - Koltsova, Tatiana S. A1 - Tolochko, Oleg V. A1 - Michailov, Vesselin T1 - Effect of hot pressing modes on the structure and properties of an aluminum-carbon nanofibers’ composite material T2 - Metal Science and Heat Treatment Y1 - 2015 U6 - https://doi.org/10.1007/s11041-015-9793-6 SN - 0026-0673 SN - 1573-897 VL - 56 IS - 9–10 SP - 525 EP - 530 ER - TY - CHAP A1 - Naumov, Anton A1 - Chenikov, Evgenii V. A1 - Golubev, Iurii A1 - Michailov, Vesselin T1 - Numerical simulation and microstructure analysis of friction stir welded Al 6082 T2 - METAL 2015, 24th International Conference on Metallurgy and Materials, conference proceedings, June 3rd-5th 2015, Brno Y1 - 2015 SN - 978-80-87294-62-8 PB - Tanger CY - Ostrava ER - TY - CHAP A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Schweißtechnische Simulation der lokalen Eigenschaften in der Wärmeeinflusszone von Mehrlagenschweißungen T2 - ANSYS Conference & 33rd CADFEM Users' Meeting, 24. - 26. Juni, Bremen, conference proceedings Y1 - 2015 PB - CADFEM GmbH CY - Grafing ER - TY - CHAP A1 - Doynov, Nikolay A1 - Kuke, Felix A1 - Michailov, Vesselin T1 - Thermal straightening simulation of welded structures T2 - Proceedings, METEC & 2nd ESTAD 2015, European Steel Technology and Application Days, Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 Y1 - 2015 SN - 978-3-00-049542-7 SP - P 709, 1 EP - 6 PB - TEMA Technologie Marketing AG CY - Aachen ER - TY - CHAP A1 - Fritzsche, Sebastian A1 - Seidlitz, Holger A1 - Winkelmann, Kai A1 - Michailov, Vesselin ED - Pająk, Anna T1 - Structural reinforced FRP sandwich constructions for lightweight floor panels T2 - Conference papers, APT '15, 11th International Conference Advances in Plastics Technology, Sosnowiec, 13 - 15 October 2015 Y1 - 2015 SN - 978-83-63555-47-4 CY - Gliwice ER - TY - CHAP A1 - Golubev, Iurii A1 - Naumov, Anton A1 - Michailov, Vesselin T1 - Developing finite element model of the friction stir welding for temperature calculation T2 - METAL 2014, International Conference on Metallurgy and Materials, May 21 st - 23rd 2014, Brno Y1 - 2014 SN - 978-80-87294-54-3 SP - 1242 EP - 1248 ER - TY - GEN A1 - Genchev, Gancho Vladimirov A1 - Doynov, Nikolay A1 - Ossenbrink, Ralf A1 - Bokuchava, Gizo A1 - Petrov, Peter A1 - Michailov, Vesselin T1 - Numerical and Experimental Study of Residual Stress Distribution in Laser Beam Welded Joint Y1 - 2016 UR - https://www.tugraz.at/fileadmin/user_upload/Events/Seggau/Dokumente/Dokumente_THERMEC/Program_Book_April_2016.pdf N1 - THERMEC 2016, 9th International Conference on Processing & Manufacturing of Advanced Materials, May 29-June 03, 2016, Graz, Austria SP - S. 20 ER - TY - GEN A1 - Michailov, Vesselin T1 - Prediction of the Properties of Heat-Affected Zone of Welded Joints of Sheets from Aluminum Alloys with Structured Surface T2 - Metal Science and Heat Treatment Y1 - 2016 SN - 0026-0673 SN - 1573-8973 VL - 58 IS - 1-2 SP - 46 EP - 50 ER - TY - GEN A1 - Karkhin, Victor A. A1 - Garkov, Sergey Vladimirovich A1 - Michailov, Vesselin T1 - Calculation of thermal processes in welding thick plates with moving axisymmetric heat sources T2 - Welding International Y1 - 2016 SN - 0950-7116 SN - 1754-2138 VL - 30 IS - 9 SP - 708 EP - 711 ER - TY - CHAP A1 - Ivanov, Sergey Y. A1 - Panchenko, Oleg V. A1 - Karkhin, Victor A. A1 - Michailov, Vesselin A1 - Velichko, Olga V. T1 - Comparative study of mechanical inhomogeneity of laser and friction stir welded joints of Al-Mg-Si alloy T2 - METAL 2015, 24th International Conference on Metallurgy and Materials, conference proceedings, June 3rd-5th 2015, Brno Y1 - 2016 SN - 978-80-87294-62-8 PB - Tanger CY - Ostrava ER - TY - CHAP A1 - Kuke, Felix A1 - Kloshek, Alexander A1 - Michailov, Vesselin T1 - Untersuchung des Einflusses von rohrförmigen Stahlelektroden auf das Prozessverhalten und den Werkstoffübergang beim MSG-Schweißen T2 - DVS Congress, September 2015, Nürnberg Y1 - 2015 SN - 978-3-945023-46-4 SP - 615 EP - 620 PB - DVS Media GmbH CY - Düsseldorf ER - TY - CHAP A1 - Naumov, Anton A1 - Chenikov, Evgenii V. A1 - Golubev, Iurii A1 - Michailov, Vesselin T1 - Research of temperature distribution during friction stir welding of 2 mm Aw 6082 sheets T2 - METAL 2015, 24th International Conference on Metallurgy and Materials, conference proceedings, June 3rd-5th 2015, Brno Y1 - 2015 SN - 978-80-87294-62-8 SP - 651 EP - 653 PB - Tanger CY - Ostrava ER - TY - GEN A1 - Schleuß, Leander A1 - Richter, Thomas A1 - Ossenbrink, Ralf A1 - Michailov, Vesselin T1 - Plasma Cutting of Structured Sheet Metals in Comparison with Laser Beam Cutting T2 - Journal of Materials Science and Engineering Y1 - 2015 U6 - https://doi.org/10.17265/2161-6221/2015.3-4.004 SN - 2161-6221 VL - 5 IS - 3-4 SP - 135 EP - 144 ER - TY - BOOK A1 - Michailov, Vesselin A1 - Karkhin, Victor A. A1 - Petrov, Peter T1 - Principles of welding Y1 - 2016 SN - 978-5-7422-5569-7 PB - Polytechnic Univ. Publ. CY - St. Petersburg ER -