TY - GEN A1 - Chatharajupalli, Navya Sneha A1 - Rotta, Randolf A1 - Karnapke, Reinhardt A1 - Nolte, Jörg T1 - Assessing the Feasibility of Combined BLE and Wi-Fi Communication for High Data Sensing Applications T2 - EWSN '23: Proceedings of the 2023 International Conference on Embedded Wireless Systems and Networks N2 - Advanced sensors generate more data than can be transmitted using classic battery-powered wireless sensor networks. While using Wi-Fi would provide plenty of throughput, the receivers are energy hungry and, thus, the radio time needs to be reduced. Previous research suggests to combine Wi-Fi with low-power technologies such as BLE for an energy efficient coordination of the Wi-Fi radios. Existing approaches focus on individual point-to-point routes whereas certain applications require concurrent transmissions. We evaluated the combination of BLE and Wi-Fi on the ESP32-S3 multi-radio microcontroller through detailed energy and throughput measurements. The results show that established BLE connections allow to activateWi-Fi quickly on-demand; the energy efficiency of the data transmission is significantly improved over previous works but the BLE connection setup is prohibitively slow. While the combination of BLE and Wi-Fi provides high throughput with good energy efficiency, careful design of the BLE-based signalling protocol is necessary to also achieve low latency. Y1 - 2023 U6 - https://doi.org/10.5555/3639940.3639948 SP - 56 EP - 59 PB - Association for Computing Machinery CY - New York ER - TY - GEN A1 - Chatharajupalli, Navya Sneha A1 - Rotta, Randolf A1 - Karnapke, Reinhardt A1 - Nolte, Jörg T1 - Probing considered harmful : leveraging RSSI for link quality prediction T2 - Proceedings of the IEEE 50th Conference on Local Computer Networks : LCN 2025 : October 14-16, 2025, Sydney, Australia N2 - Wireless mesh protocols that use a routing metric based on throughput or airtime require predictions about future throughput for all mesh neighbors. Typically, the Wi-Fi rate controller provides this information, and state-of-the-art rate control algorithms estimate it based on statistics from past unicast transmissions. This introduces an adverse cross-layer dependency because meaningful statistics are only available for the links that were used by the routing layer. Existing implementations either ignore this, or use other routing metrics, such as distance, or generate artificial periodic probe traffic to all neighbors. Unfortunately, probing reacts slowly to changing conditions, increases the medium contention, and can lead to overly optimistic predictions. To overcome this, we introduce an RSSI-based link quality prediction for the routing layer. Benchmarks in a B.A.T.M.A.N. version V mesh show a decrease of round-trip time by three orders of magnitude and an increase of the end-to-end packet delivery ratio. TCP connections became possible over long routes that were previously unusable. Although highly imprecise, the easy to acquire RSSI provided sufficiently good predictions for our mesh network. KW - Wireless Mesh Network KW - Multi-hop routing KW - Neural Networks KW - Machine Learning KW - Link quality predictors Y1 - 2025 SN - 979-8-3315-3704-3 U6 - https://doi.org/10.1109/LCN65610.2025.11146347 SN - 2831-7742 SP - 1 EP - 9 PB - IEEE CY - New York, NY ER - TY - GEN A1 - Chatharajupalli, Navya Sneha A1 - Rotta, Randolf A1 - Karnapke, Reinhardt A1 - Nolte, Jörg T1 - Animal health monitoring and tracking through solar-powered mesh network T2 - 22. GI/ITG KuVS Fachgespräch Sensornetze : 11. und 12. September 2025, Clausthal-Zellerfeld N2 - Various health and movement sensors, especially bolus sensors inside a cow’s stomach, are crucial for timely medical interventions. Commonly, wall-powered gateways are used to retrieve sensor updates and forward them quickly to an analysis service. In large outdoor farmlands, however, localisation of individual cows becomes important while the long-term operation of wall-powered gateways is costly. Previous solutions that use a LoRaWAN gateway with bigger antennas are still limited to 500m and provide only poor localization information. Existing solutions based on a mesh network of repeaters provide good localization but still depend on external wall power. Solar-powered mesh nodes would simplify the long-term operation. In order to achieve this, a significant improvement of the energy efficiency of the mesh nodes is necessary. This paper explores protocol design choices for the energy-efficient communication between mesh nodes and the bolus sensors. By introducing synchronised sleep and communication intervals, the size of the solar panels and energy storage can be reduced. KW - Wireless Networks KW - Solar-harvesting KW - Localisation Y1 - 2025 UR - https://dokumente.ub.tu-clausthal.de/receive/clausthal_mods_00002954 U6 - https://doi.org/10.21268/20250805-0 SP - 1 EP - 3 PB - TU Clausthal-Zellerfeld CY - Clausthal-Zellerfeld ER - TY - GEN A1 - Herglotz, Christian A1 - Jabłoński, Ireneusz A1 - Karnapke, Reinhardt A1 - Shahin, Keyvan A1 - Reichenbach, Marc T1 - Designing intelligent sensor networks : a comprehensive survey of sensing, edge AI, and 5G+/6G connectivity T2 - IEEE access N2 - With the advent of advanced transmission technologies, powerful neural-network architectures, and the availability of cheap sensing solutions, new paradigms for monitoring, controlling, and optimizing any automated system are appearing. While traditionally, sensors simply provided visual or acoustic feedback to human operators of such systems, nowadays, autonomous systems more and more rely on the automatic sensing and processing of such data to react and adapt their control mechanisms. In such complex control systems, sensor networks play a vital role. In this paper, we assess the state of the art in the three main components used within sensor networks: smart sensing elements, transmission technologies, and processing technologies. Concerning the latter, more and more artificial intelligence-based methods are developed and applied turning smart sensor networks into intelligent or even cognitive sensor networks. For the development of such sensing systems, a high variety of performance metrics could be important to the designer. This paper discusses the vast design space for intelligent sensor networks and provides guidance and directions on how to construct future intelligent sensor networks efficiently. KW - 5G, Sensor networks, Edge computing, Energy efficiency, KPIs, Design space, AI Y1 - 2025 U6 - https://doi.org/10.1109/ACCESS.2025.3615205 SN - 2169-3536 VL - 13 SP - 172306 EP - 172325 PB - IEEE CY - Piscataway, NJ ER - TY - GEN A1 - Karnapke, Reinhardt A1 - Mikhalev, Daniil A1 - Cotardo, Dario A1 - During, Fabian A1 - Kupke, David A1 - Walther, Karsten A1 - Mechtcherine, Viktor T1 - Enhancing performance and increasing safety of concrete pumps through digitalization T2 - IEEE SAS 2025 : IEEE Sensors and Applications 2025 : symposium proceedings N2 - Modern concrete mixtures are becoming increasingly complex due to environmental and economic pressures. The use of fillers and advanced admixtures enables a reduction in cement content, which alters the properties of fresh concrete. These changes often lead to higher viscosity and increased sensitivity to temperature fluctuations and water content variations, potentially causing flow instabilities and pipeline blockages during pumping.In this paper, a sensor-based edge device is introduced that can be attached to existing concrete pumps to monitor process data and detect impending blockages. By continuously analyzing hydraulic data during the pumping process, the system assesses the material’s flow behavior to identify early signs of potential blockages. These insights enable proactive interventions, improving operational safety and reducing costly disruptions.conct KW - Temperature sensors KW - Viscosity KW - Temperature measurement KW - Temperature distrubution KW - Sensitivity KW - Pipelines KW - Sensors KW - Safety KW - Synthetic aperture sonar KW - Monitoring Y1 - 2025 SN - 979-8-3315-1193-7 U6 - https://doi.org/10.1109/SAS65169.2025.11105159 SP - 1 EP - 6 PB - Institute of Electrical and Electronics Engineers (IEEE) CY - Piscataway, NJ ER - TY - GEN A1 - Rotta, Randolf A1 - Chatharajupalli, Navya Sneha A1 - Naumann, Billy A1 - Schulz, Julius A1 - Karnapke, Reinhardt A1 - Werner, Matthias A1 - Nolte, Jörg T1 - Demo: B.A.T.M.A.N. mesh routing on ultra low-power IEEE 802.11 modules T2 - 2024 IEEE 49th Conference on Local Computer Networks (LCN) N2 - When implementing multi-hop mesh network protocols, efficient direct communication, route discovery, and route repair are crucial to achieve high network throughput. To our knowledge, there is no open mesh routing protocol available for ultra low power IEEE 802.11 modules. Previous work relied on single board computers like Raspberry Pi. We implemented the B.A.T.M.A.N. mesh protocol on the popular Espressif ESP32 along with a novel hybrid rate adaptation for the selection of efficient routes. In this demo we showcase challenges and solutions related to the implementation on ESP32 and how the hybrid rate adaptation improves end-to-end throughput. KW - ad-hoc networks KW - mesh networks KW - low power electronics KW - throughput Y1 - 2024 SN - 979-8-3503-8800-8 U6 - https://doi.org/10.1109/LCN60385.2024.10639789 SN - 2832-1421 PB - IEEE ER -