TY - CHAP A1 - Mandal, Dipankar A1 - Müller, Klaus A1 - Seifarth, Olaf A1 - Hoffman, Patrick A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Study of reactions at the interface P(VDF/TrFE)/Al and P(VDF/TrFE)/PEDOT:PSS T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 42 N2 - Due to potential use in non volatile memory application, Poly(vinylidene fluoride/trifluoroethylene) (P(VDF-TrFE)) is a great deal of interest, especially to produce organic field effect transistors (OFET). Right now it was found that Aluminum is one of the cost-effective inorganic electrode candidate. On the other hand, poly(3,4 ethylenedioxythiophene):poly(4-styrenesulfonate)(PEDOT:PSS) shows promising behavior for the application as organic electrode. In part of our investigations we have systematically studied surface interactions of organic ferroelectric thin films (P(VDF-TrFE))with inorganic (Al) and organic layers (PEDOT:PSS). By X-ray photoelectron spectroscopy (XPS) is has been found that there is a interfacial reaction with Al and the copolymer. In contrast, for electrodes, made of PEDOT: PSS, we found not such kind of behavior. In this case, we found no evidence for any surface reaction. Furthermore, we present our results concerning the orientation of permanent dipoles in the co-polymer (formed between hydrogen and fluorine atom). Here, we use Near-edge X-ray absorption fine structure (NEXAFS) analysis at the U 49/2 - PGM2 beam line of the BESSY-II Synchrotron. This work is supported by Deutsche Forschungsgemeinschaft (DFG) within priority program 1157 (DSCH 745/11-1). Y1 - 2007 UR - http://www.dpg-verhandlungen.de/year/2007/conference/regensburg/part/syoe/session/8/contribution/18 SN - 0420-0195 SP - S. 797 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Henkel, Karsten A1 - Sohal, Rakesh A1 - Torche, Mohamed A1 - Schwiertz, Carola A1 - Burkov, Yevgen A1 - Schmeißer, Dieter T1 - PrOx/AlON stacks as a high-k candidate on SiC T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 42 N2 - We study the chemical stability and electrical properties of Pr-oxides-SiC MIS stacks. In MISFET devices for high power applications the electric field scaling at the interface between semiconductor and insulator is determined by the ratio of their permittivity values. A high-k material can be used to optimize the performance of such devices. In previous studies we had to understand that the chemical reactivity of the PrOx/SiC interface causes a destructive interaction yielding silicate and graphite formation as well as poor electrical performance after direct deposition of PrOx onto SiC. Therefore we introduced an additional chemically inert layer and in this contribution we focus on PrOx/AlON as a suitable insulator stack. In our spectroscopic investigations we recognized a stable AlON/3C-SiC interface even for annealing steps up to 900∘C. First electrical characterizations are performed on Si substrates and we find a strong improvement in the leakage current by several orders of magnitude down to values of 10−7 A/cm2 at an EOT of 4nm and interface state densities of mean values of 5*1011/eVcm2. We also report on our ongoing electrical characterization of such stacks on SiC substrates. This work is supported by Deutsche Forschungsgemeinschaft within priority program 1157 (DSCH 745/9-2). Y1 - 2007 UR - http://www.dpg-verhandlungen.de/year/2007/conference/regensburg/part/df/session/10/contribution/8 SN - 0420-0195 SP - S. 215 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Burkov, Yevgen A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - X-ray photoemission spectroscopy of Aluminium Oxynitride on Si(001) and the rise as buffer layers T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43 N2 - Praseodymium oxide (PrxOy) is one of the candidate as high-k transistor gate dielectrics, but aluminium oxynitride (AlxONy) as buffer layer is needed to prevent diffusions from the silicon into PrxOy and to hinder charge injection from the semiconductor into the insulator. The thermal stability and thickness dependence of aluminum oxynitride (AlxONy) has been investigated by synchrotron radiation photoemission spectroscopy (SR-PES). AlxONy layers were prepared by low energy ion-beam assisted deposition (LE-IBAD) at room temperature on a silicon substrate cleaned with HF-acid. Aluminium oxynitride is stable till 800∘C. From photoemission spectra we can assess that silicon oxynitride is built as first and then the growth of AlxONy follows. Resonant inelastic X-ray scattering measurements with synchrotron radiation have been performed. The combination of X-ray absorption spectroscopy (XAS) and RIXS make possible to determinate the band gap of AlxONy. Y1 - 2008 UR - http://www.dpg-verhandlungen.de/year/2008/conference/berlin/part/ds/session/23/contribution/5 SN - 0420-0195 SP - S. 243 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Henkel, Karsten A1 - Seime, Bernd A1 - Paloumpa, Ioanna A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - C(V) and C(t) measurements on MFIS structures consisting P[VDF/TrFE] as ferroelectric layer T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43 N2 - Ferroelectric Field Effect Transistors (FeFETs) are considered as a candidate for future non volatile and non destructive readout memory cells. A possible low cost solution is the use of poly[vinylidene fluoride trifluoroethylene (P[VDF/TrFE]). Using P[VDF/TrFE] we focus on metal ferroelectric insulator semiconductor (MFIS) capacitor structures. In this contribution we will summarize our investigations related to capacitance measurements in dependence of applied bias (C(V)) and time (C(t)). The thickness of the ferroelectric layer as well as the thickness and the material of the buffer layer have been investigated for optimization of the write voltage. CV measurements at higher temperatures deliver decreased flatband voltage shifts within one CV loop resulting in lower memory windows. At temperatures around 100∘C the hysteresis totally vanished, pointing out the ferroelectric behavior of the system. C(t) measurements at a constant bias have been performed for retention analysis of the MFIS stack. After applying a writing pulse we could distinguish between a higher and a lower capacitance state for more than 5 days. This work is supported by Deutsche Forschungsgemeinschaft within priority program 1157 (SCHM 745/11-2). Y1 - 2008 UR - http://www.dpg-verhandlungen.de/year/2008/conference/berlin/part/sysa/session/4/contribution/7 SN - 0420-0195 SP - S. 828 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Müller, Klaus A1 - Mandal, Dipankar A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - Interface reactions of ferroelectric copolymer layers with different electrode materials T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43 N2 - The ferroelectric copolymer poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) is a possible material for low cost applications as organic nonvolatile memory element. We present an XPS interface investigation of the copolymer/electrode interface. Below 100nm film thickness, interface phenomena becomes important. Possible interface reactions could lead to a reduction of the ferroelectric functionality.We present a comparative study of the two interfaces Al/P(VDF-TrFE) and PEDOT:PSS/P(VDF-TrFE). The result is a clear indication of a surface reaction in between the Aluminum-electrodes. In contrast, for PEDOT:PSS the measurements shows a layer by layer formation of the interface PEDOT:PSS/PVDF without any reaction. Second, we present a study of remanent polarization of ultrathin spincoated films of the copolymer, in a thickness range from 5 to 100mn, with organic electrodes like PEDOT:PSS. The measurements are carried out by using the flatband shift of a capacitance-voltage (CV) characteristic. This shift of flatband voltage is used as value for the electric polarization of the polymer. Y1 - 2008 UR - http://www.dpg-verhandlungen.de/year/2008/conference/berlin/part/sysa/session/5/contribution/16 SN - 0420-0195 SP - S. 830 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Henkel, Karsten A1 - Torche, Mohamed A1 - Schwiertz, Carola A1 - Paloumpa, Ioanna A1 - Sohal, Rakesh A1 - Müller, Klaus A1 - Schmeißer, Dieter T1 - Inorganic and organic layers for high-k and organic memory applications T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 41 N2 - We report about organic and inorganic MIS stacks for new possibilities for high frequency and high power applications as well as for non volatile memory cell. The organic stack contains a ferroelectric polymer as the functional layer. Poly[vinylidene fluoride trifluoroethylene] (P[VDF/TrFE]) is spin coated from a solution onto oxidised silicon substrates. We report on the polarisation induced flatband voltage shifts. For the inorganic stack our attempt is to combine higk-k dielectrics with high band gap semiconductors (SiC). Praseodymium oxide layers are prepared by electron beam evaporation from Pr6O11 powder and in situ controlling of interface and volume composition (XPS). Praseodymium silicate layers were prepared either by metal evaporation onto a thin ox- ide on top of the semiconductor and following annealing steps or by a wet chemical process out of aqueous Pr(NO3)3 solutions. Using spectro-scopic characterisation we investigate the stability of the various inter-faces within the stacks as well as the reactivity of the metal electrodes on thin Pr2O3. We report the results of electrical characterisation consisting of permittivity values, leakage current and density of interface states. Y1 - 2006 UR - http://www.dpg-verhandlungen.de/year/2006/conference/dresden/part/df/session/1/contribution/4 SN - 0420-0195 SP - S. 127 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Müller, Klaus A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter T1 - P(VDF/TrFE) as ferroelectric insulation layer for organic field effect transistors T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 41 N2 - The ferroelectric polymer poly(vinylidene fluoride trifluoroethylene)(P(VDF-TrFE)) is used as insulating material for organic field effect tran-sistors (OFET) and metal-insulator-semiconductor (MIS)-structures. For the MIS-structures, we find the typical hysteresis in the CV charac-teristic upon increasing the voltage scan window. Based on these results, we fabricate OFET with regioregular poly(3-hexlythiophene)(P3HT) as organic semiconductor. The transistors are constructed in bottom gate architecture with thin layers of spincoated P(VDF-TrFE) as gate insulation (100nm). The drain-source current of the OFET is reversible affected by the polarized gate, which gives opportunities for organic nonvolatile memory elements. We present characteristic features like the hysteretic drain current response or the data retention. Furthermore, we present measurements with Kelvin probe force microscopy, a method which gives informations on the lateral distributions of the surface potential. Y1 - 2006 UR - http://www.dpg-verhandlungen.de/year/2006/conference/dresden/part/cpp/session/23/contribution/28 SN - 0420-0195 SP - S. 101 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Richter, Matthias A1 - Müller, Klaus A1 - Philip, Shine A1 - Paloumpa, Ioanna A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Temperature dependence of organic solar cell parameters T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 44 N2 - The influence of an annealing step on the parameters of bulk heterojunction organic solar cells is investigated. In order to fabricate the solar cells we use glass coated with ITO (Indiumtinoxide) as a substrate on which the active layer consisting of P3HT and PCBM is spincoated. Al-electrodes are evaporated on top of the active layer. We use PEDOT:PSS as buffer layer. Each sample is annealed at different temperatures for a short time. Between every temperature step the I-V characteristic of the cell is measured. The following parameters are derived afterwards: FF, Isc (density), Voc. Also the efficiency is estimated. The results show a maximum cell efficiency for drying at 100°C for 20sec. A further important step for preparation is the drying procedure of the PEDOT:PSS layer. Here an improvement of about 50% in cell efficiency is measured after drying at 50°C for 5 days under inert gas atmosphere. Y1 - 2009 UR - http://www.dpg-verhandlungen.de/year/2009/conference/dresden/part/syop/session/4/contribution/2 SN - 0420-0195 SP - S. 671 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Hoffmannbeck, David A1 - Richter, Matthias A1 - Städter, Matthias A1 - Paloumpa, Ioanna A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - Spectroscopic and microscopic characterization of potential catalysts for the hydrogenation of CO2 T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46 N2 - The reduction of CO2 emissions is a general demand of the society in order to avoid irreversible climate changes. We are investigating potential catalysts for the hydrogenation of CO2 in particular for its application in the so called oxyfuel combustion process. In order to understand the catalytic behavior of the investigated materials we use the techniques X-Ray Photoemission (XPS) and -absorption (XAS) Spectroscopy as well as X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The prospective of our work is to figure out the electronic and structural properties of the material and to optimize proper catalysts or design new ones for best catalytic activity. Beside the spectro-microscopic investigations the catalysts are tested under Sabatier reaction conditions in terms of activity, stability and sensitivity against poisoning. In our preliminary work we constructed a Sabatier reactor system with analytical parts based on infrared absorption and mass spectroscopy modules. First spectroscopic and catalytic results achieved on a commercially available Ru/Al2O3 catalyst will be presented. Y1 - 2011 UR - http://www.dpg-verhandlungen.de/year/2011/conference/dresden/part/o/session/60/contribution/123 SN - 0420-0195 SP - S. 483 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Mbua, Roy A1 - Müller, Klaus A1 - Richter, Matthias A1 - Henkel, Karsten A1 - Paloumpa, Ioanna A1 - Schmeißer, Dieter A1 - Kramm, Ulricke T1 - Investigation of new Catalysts for PEM Fuel Cells T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft, Reihe 6, Bd. 46 N2 - Increasing green house emissions amplify global warming concerns worldwide. Fuel cells, based on polymer electrolyte membranes (PEM) are part of the solution to this issue. We aim at developing and testing new catalysts for fuel cells. Platinum catalysts perform best in PEM fuel cells to date but they are very expensive. For fuel cells to be perfectly applicable and economically affordable, an alternative catalyst with similar or even greater efficiency should be developed. Metal phthalocyanines are known to be good oxygen reduction catalysts and are associated with high electron transfer properties. We investigated Cobalt Phthalocyanine in its pure state mixed with Carbon Black (CoPc:Carbon Black=1:9) untreated and also after a treatment in N2 at several temperatures, up to 1000°C for 30 minutes. Results of XPS and EDX analyses reveal that the treatment at higher temperatures causes a rearrangement in the chemical states of Co, N and C atoms. Furthermore, results of cycling voltammetry (CV) analysis reveal that CoPc treated in N2 at 800°C exhibited a higher current density, in conclusion, a higher catalytic activity than the untreated CoPc. Y1 - 2011 UR - http://www.dpg-verhandlungen.de/year/2011/conference/dresden/part/o/session/60/contribution/119 SN - 0420-0195 SP - S. 483 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Henkel, Karsten A1 - Das, Chittaranjan A1 - Sowinska, Małgorzata A1 - Tallarida, Massimo A1 - Schmeißer, Dieter A1 - Gargouri, Hassan A1 - Kärkkänen, Irina A1 - Schneidewind, Jessica A1 - Gruska, Bernd A1 - Arens, Michael ED - Glück, B. K. ED - Schmidt, S. ED - Stein, E. ED - Raschke, Jörg-Uwe ED - Richter, H. T1 - Charakterisierung von TiO2-ALD-Schichten und deren Nutzung für die Passivierung von Si-Photokathoden T2 - Tagungsband Photovoltaik-Meeting: Anwendungen-Qualität-Perspektiven, Senftenberg, 15.04.2015 N2 - Wir berichten zunächst über den Einfluss der Methode der Atomlagenabscheidung auf die TiO2-Schichteigenschaften. Insbesondere wird der Zusammenhang zwischen Ti3+- sowie Interbandzuständen mit elektrischen Kennlinien und deren Einfluss auf funktionale Schichteigenschaften diskutiert. Anschließend werden Mikrostrukturierung, Grenzflächen-Engineering und konforme Abscheidung einer TiO2-ALD-Schutzschicht effektiv zur Performance-Steigerung von p-Si-Photokathoden angewendet. KW - TiO2 KW - Korrosion KW - Atomlagenabscheidung KW - Silizium KW - Photokathoden KW - Linear Scan Voltametry KW - Photoelektronenspektroskopie Y1 - 2015 SP - 3 EP - 8 PB - BTU Cottbus-Senftenberg CY - Senftenberg ER - TY - GEN A1 - Tamang, Abiral A1 - Ghosh, Sujoy Kumar A1 - Garain, Samiran A1 - Alam, Md. Mehebub A1 - Haeberle, Jörg A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Mandal, Dipankar T1 - DNA-Assisted β‑phase Nucleation and Alignment of Molecular Dipoles in PVDF Film: A Realization of Self-Poled Bioinspired Flexible Polymer Nanogenerator for Portable Electronic Devices T2 - ACS Applied Materials & Interfaces N2 - A flexible nanogenerator (NG) is fabricated with a poly(vinylidene fluoride) (PVDF)film, where deoxyribonu-cleic acid (DNA) is the agent for the electroactive β-phase nucleation. Denatured DNA is co-operating to align the molecular−CH2/−CF2 dipoles of PVDF causing piezo- electricity without electrical poling. The NG is capable of harvesting energy from a variety of easily accessible mechanical stress such as human touch, machine vibration, football juggling, and walking. The NG exhibits high piezoelectric energy conversion efficiency facilitating the instant turn-on of several green or blue light-emitting diodes. The generated energy can be used to charge capacitors providing a wide scope for the design of self-powered portable devices. KW - PVDF KW - β-phase KW - DNA KW - self-poling KW - piezoelectric flexible nanogenerator Y1 - 2015 U6 - https://doi.org/10.1021/acsami.5b04161 SN - 1944-8244 SN - 1944-8252 IS - 7 SP - 16143 EP - 16147 ER - TY - GEN A1 - Sowińska, Małgorzata A1 - Henkel, Karsten A1 - Schmeißer, Dieter A1 - Kärkkänen, Irina A1 - Schneidewind, Jessica A1 - Naumann, Franziska A1 - Gruska, Bernd A1 - Gargouri, Hassan T1 - Plasma-enhanced atomic layer deposition of titanium oxynitrides films: A comparative spectroscopic and electrical study T2 - Journal of Vacuum Science and Technology A N2 - The process parameters’ impact of the plasma-enhanced atomic layer deposition (PE-ALD) method on the oxygen to nitrogen (O/N) ratio in titanium oxynitride (TiOxNy) films was studied. Titanium(IV)isopropoxide in combination with NH3 plasma and tetrakis(dimethylamino) titanium by applying N2 plasma processes were investigated. Samples were characterized by the in situ spectroscopic ellipsometry, x-ray photoelectron spectroscopy, and electrical characterization (current–voltage: I-V and capacitance–voltage: C-V) methods. The O/N ratio in the TiOxNy films is found to be very sensitive for their electric properties such as conductivity, dielectric breakdown, and permittivity. Our results indicate that these PE-ALD film properties can be tuned, via the O/N ratio, by the selection of the process parameters and precursor/coreactant combination. KW - plasma enhanced atomic layer deposition KW - titanium oxynitride KW - X-ray photoelectron spectroscopy KW - ellipsometry KW - current-voltage KW - capacitance-voltage Y1 - 2016 U6 - https://doi.org/10.1116/1.4936227 SN - 0734-2101 SN - 1520-8559 IS - 34 SP - 01A127-1 EP - 01A127-9 ER -