TY - CHAP A1 - Burkov, Yevgen A1 - Henkel, Karsten A1 - Schmeißer, Dieter T1 - X-ray photoemission spectroscopy of Aluminium Oxynitride on Si(001) and the rise as buffer layers T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft ; Reihe 6, Bd. 43 N2 - Praseodymium oxide (PrxOy) is one of the candidate as high-k transistor gate dielectrics, but aluminium oxynitride (AlxONy) as buffer layer is needed to prevent diffusions from the silicon into PrxOy and to hinder charge injection from the semiconductor into the insulator. The thermal stability and thickness dependence of aluminum oxynitride (AlxONy) has been investigated by synchrotron radiation photoemission spectroscopy (SR-PES). AlxONy layers were prepared by low energy ion-beam assisted deposition (LE-IBAD) at room temperature on a silicon substrate cleaned with HF-acid. Aluminium oxynitride is stable till 800∘C. From photoemission spectra we can assess that silicon oxynitride is built as first and then the growth of AlxONy follows. Resonant inelastic X-ray scattering measurements with synchrotron radiation have been performed. The combination of X-ray absorption spectroscopy (XAS) and RIXS make possible to determinate the band gap of AlxONy. Y1 - 2008 UR - http://www.dpg-verhandlungen.de/year/2008/conference/berlin/part/ds/session/23/contribution/5 SN - 0420-0195 SP - S. 243 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - GEN A1 - Müller, K. A1 - Goryachko, Andriy A1 - Burkov, Yevgen A1 - Schwiertz, Carola A1 - Ratzke, Markus A1 - Köble, J. A1 - Reif, Jürgen A1 - Schmeißer, Dieter T1 - Scanning Kelvin probe and photoemission electron microscopy of organic source-drain structures T2 - Synthetic Metals Y1 - 2004 VL - 146 IS - 3 SP - 377 EP - 382 ER - TY - CHAP A1 - Müller, Klaus A1 - Milko, Sergey A1 - Burkov, Yevgen A1 - Schmeißer, Dieter T1 - Mischkristalle des Systems ZnS-CuInS2 für multispektrale Solarzellen T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - Wir haben CuInS2 (CIS) unterschiedlicher Herstellung (Koverdampfung, Sputtern, Pulsed Laser Deposition, CIS auf Kupferband aufgebracht) untersucht. Neben Tiefenprofilen (durch Sputtern) der Elementverteilung dieser Proben wurden der Einfluss der Temperatur, von aufgedampftem Kupfer und Indium, ebenfalls bei verschiedenen Temperaturen, auf das Verhalten der Stöchiometrie mit spektroskopischen Methoden (XPS, UPS) studiert. Parallel dazu wurde das Verhalten von im Vakuum aufgedampften ZnS und die entsprechenden Oberflächenreaktionen in Abhängigkeit von der Temperatur untersucht und charakterisiert, so dass Aussagen über die Optimierung und Anpassung von Präparationsbedingungen und Parametern zur Herstellung von erstens reinem CIS und zweitens von Mischkristallen des Typs Zn2-xCuxInxS2 möglich werden. Zwischen den beiden Endgliedern ZnS und CuInS2 besteht bis auf einen Phasenübergang bei etwa 80% CIS lückenlose Mischbarkeit gemäss Zn2-xCuxInxS2 (Bente: Chem.Erde (1991)). Die elektronische Bandlücke dieser Mischkristalle lässt sich im Vergleich zu reinem CuInS2 in einem Bereich von 3,67 eV (ZnS) bis 1,55 eV (CuInS2) variieren. Damit besteht die Möglichkeit, durch kontrollierte Änderung der Zusammensetzung der Schichten die Effizienz von Solarzellen aus diesem Material zu optimieren. KW - CIS-Solarzellen KW - Röntgen-Photoelektronenspektroskopie KW - Tiefenprofilierung Y1 - 2002 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Müller, Klaus A1 - Burkov, Yevgen A1 - Schmeißer, Dieter T1 - Spectromicroscopic Characterisation of All Polymer Transistor Structures T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - In order to optimize organic field effect transistors, the characterization of surfaces in terms of their roughness or chemical composition is very important. We report on high resolution spectromicroscopic mapping of organic thin film transistors by photoemission electron microscopy (PEEM). It was shown that PEEM is a useful technique to characterize the surface morphology (roughness), the chemical homogeneity or the composition of structures in between the source and drain electrodes. Mapping of surface potentials, especially at the interface electrode/channel is possible. We compare different preparation methods and the characterization at applied voltages is also shown. The transistors itself were prepared by a new low cost method. The electrodes for source and drain have been prepared by a plotting method with colloidal graphite or carbon black as the conducting material. P3HT was used as active layer and has been prepared by spin coating. KW - organic field effect transistor KW - photoemission electron microscopy (PEEM) Y1 - 2004 UR - http://www.dpg-verhandlungen.de/year/2004/conference/regensburg/part/syoh/session/5/contribution/74?lang=de PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Müller, Klaus A1 - Burkov, Yevgen A1 - Schmeißer, Dieter T1 - Surface potential profiling on organic thin film transistors by photoemission-electron-microscopy (PEEM) T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - Surface potential imaging with Photoemission-electron-microskopy (PEEM) in high lateral resolution is introduced as a new tool for the characterisation of organic transistor structures. We use source-drain- electrode structures of different organic materials like carbon-black or graphite plotted on a printing foil. Semiconducting regioregular Poly(3-Hexylthiophene-2,5-diyl) (P3HT) was deposited by spin coating. For our measurements we used radiation of a standard high pressure Hg-lamp (4,9 eV) and synchrotron radiation at the BESSYII-U49/2 beam line. In contrast to Kelvin-AFM measurements of the surface potential, PEEM enables a simultaneous analysis of chemical composition by photoelectron spectroscopy. UPS, for example, at zero potential gives information on chemical homogeneity of the organic semiconductor in lateral resolution. PEEM images at applied voltages, compared with UPS-spectra, gives informations on doping profiles in the semiconductor, for example. In conclusion, PEEM should be a complementary method for characterisation of the surface potential with Kelvin-AFM. In addition, PEEM gives opportunities for measurements of chemical composition in the working state of the transistor (applied voltages). KW - organic field effect transistor KW - Photoemission-electron-microscopy (PEEM) KW - Kelvin-AFM KW - X-Ray photoelectron spectroscopy Y1 - 2005 UR - http://www.dpg-verhandlungen.de/year/2005/conference/berlin/part/syoo/session/6/contribution/41?lan=en PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER - TY - CHAP A1 - Seifarth, Olaf A1 - Burkov, Yevgen A1 - Schmeißer, Dieter A1 - Sydorenko, Alexander A1 - Krenek, Radim A1 - Stamm, Manfred T1 - Photoelectron spectroscopy and microscopy on magnetic nano particles embedded into block copolymers T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - The formation of metallic nano particles stored in thin films of block copolymers has been investigated by means of synchrotron radiation based photoemission spectroscopy (PES) and microscopy (PEEM). Empty channels in poly(styrene-block-4-vinylpyridine) copolymer with diameters of tens of nanometers filled with CrO2, Cr2O3 and Ni provide ideal bases for performing electron spectroscopy with energy and lateral resolution on magnetic nano particles. We present UPS, XPS, NEXAFS spectra and PEEM images on and off the C 1s, Cr 2p, Ni 2p resonances and discuss the geometric and electronic structure of such compounds. The synchrotron radiation was delivered from the U49/2 beamline at BESSY II. KW - photoelectron emission microscopy (PEEM) KW - X-ray photoelectron spectroscopy KW - X-ray absorption spectroscopy KW - block copolymers KW - magnetic nano particles Y1 - 2005 UR - http://www.dpg-verhandlungen.de/year/2005/conference/berlin/part/cpp/session/29/contribution/27?lan=en PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER -