TY - CHAP A1 - Grüger, Lennart A1 - Fischer, Tim Sebastian A1 - Woll, Ralf ED - Gapiński, Bartosz ED - Ciszak, Olaf Stanisław ED - Ivanov, Vitalii ED - Machado, Jose Mendes T1 - Investigation of the Wire Arc Direct Energy Deposition-Process and Possible Interactions T2 - Advances in Manufacturing IV N2 - The Wire Arc Direct Energy Deposition (WA-DED) process is highly regarded as part of additive manufacturing. Compared to other additive manufacturing processes, it is characterized above all by its high deposition rate and low system costs. Despite many years of experience in the build-up welding process, WA-DED still holds a number of challenges in terms of process stability. This article analyses the interactions in the WA-DED process. To this end, the process was visualized and described with the help of Structured Analysis and Design Technique (SADT). Building on this, a process Failure Mode and Effects Analysis (FMEA) was presented to identify and priorities risks. Finally, the results of the Taguchi tests were analyzed and visualized. The results illustrate the strong interactions between the influencing factors. These have a material-specific effect on the production results. Each new material composition therefore requires a systematic analysis in order to determine quantitative correlations. In future, these can be supported by machine learning approaches. KW - Additive Manufacturing KW - Structured Analysis and Design Technique KW - Failure Mode and Effects Analysis KW - Design of Experiments Y1 - 2024 SN - 9783031564659 U6 - https://doi.org/10.1007/978-3-031-56463-5_14 SN - 2195-4356 VL - 2024 SP - 176 EP - 194 PB - Springer Nature Switzerland CY - Cham ET - 4 ER - TY - GEN A1 - Fischer, Tim Sebastian A1 - Grüger, Lennart A1 - Woll, Ralf T1 - Modellierung von Einflüssen auf das Wire Arc Additive Manufacturing T2 - Industrie Management 4.0 N2 - Das Wire Arc Additive Manufacturing, kurz WAAM, ist ein additives Fertigungsverfahren, welches metallische Bauteile auf Grundlage des Lichtbogenschweißens fertigt. Additive Fertigung ist laut DIN EN ISO/ASTM 52900 ein Prozess, welcher Bauteile aus 3D-Modelldaten schichtweise herstellt. Die grundlegenden Komponenten sind ein Schweißgerät, welches die benötigte Energie zum Schmelzen des Metalldrahts in den Prozess einbringt sowie eine Führungsmaschine, welche die vorgegebene Geometrie des Bauteils abfährt. Anwendungsbereiche sind Rapid Prototyping und Tooling, Direct Manufacturing und Additive Repair. Die größten Vorteile stellen die kostengünstige Anlagentechnik und die hohen Abscheidungsraten dar. Nachteilig am Verfahren sind die mangelnde Prozessstabilität und Wiederholgenauigkeit. Der Beitrag soll dazu dienen, den Fertigungsprozess des WAAM-Verfahrens übersichtlich darzustellen, und dabei auf die komplexen Wechselwirkungen eingehen. KW - Prozessvisualisierung KW - Additive Manufacturing KW - Wire Arc Additive Manufacturing KW - Structured Analysis and Design Technique Y1 - 2023 UR - https://library.gito.de/2023/09/fischer-im-23-05/ U6 - https://doi.org/10.30844/IM_23-5_53-57 SN - 2364-9208 IS - 5 SP - 53 EP - 57 ER -