TY - BOOK A1 - Kuss, Clemens A1 - Seebacher, Gottfried A1 - Winkler, Herwig A1 - Wurzer, Thomas A1 - Winkler, Simone T1 - Supply Chain Improvement Projekte und Systeme Y1 - 2014 SN - 3-8325-3572-1 SN - 978-3-8325-3572-8 PB - Logos Verlag CY - Berlin ER - TY - GEN A1 - Winkler, Herwig A1 - Allmayer, Sabine T1 - The impact of interorganisational interface problems on company's flexibility T2 - International Journal of Business Research Y1 - 2012 SN - 1555-1296 VL - 12 IS - 2 SP - 62 EP - 70 ER - TY - BOOK A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - Management von Güterverkehrszentren : theoretische Überlegungen und empirische Befunde KW - Management von Güterverkehrszentren KW - Theoretische Überlegungen Y1 - 2012 SN - 978-3-8325-3039-6 PB - Logos Verlag CY - Berlin ER - TY - CHAP A1 - Winkler, Herwig A1 - Seebacher, Gottfried ED - Golinska, P. T1 - Freight Villages - Physical Interfaces for linking Supply Chains T2 - Cooperation in the Supply Chain - Challenges for networking and Value Creation KW - Supply Chain KW - Freight Villages Y1 - 2012 SP - 21 EP - 33 PB - Poznan University of Technology CY - Poznan ER - TY - CHAP A1 - Winkler, Herwig A1 - Allmayer, Sabine ED - Dukic, G. T1 - The impact of interface problems within supplier-buyer relationships on flexibility and productivity T2 - ICIL 2012, Conference Proceedings Y1 - 2012 SP - 38 EP - 47 PB - University of Zagreb CY - Zagreb ER - TY - RPRT A1 - Winkler, Herwig A1 - Kuss, Clemens A1 - Wurzer, Thomas A1 - Hannusch, Gerhard T1 - Bestimmung der funktionalen Anforderungen an Supply Chain Improvement Systeme-Ergebnisse einer empirischen Untersuchung Y1 - 2012 N1 - 2. Projektbericht zum Forschungsprojekt "Untersuchung der konzeptionellen Eigenschaften und Implementierungsanforderungen von Supply Chain Improvement Systemen(SCIS)" PB - Alpen-Adria-Universität Klagenfurt CY - Klagenfurt ER - TY - RPRT A1 - Winkler, Herwig A1 - Kuss, Clemens A1 - Wurzer, Thomas A1 - Hannusch, Gerhard T1 - Literaturrecherche und Marktanalyse zur Relevanz und Verbreitung von Supply Chain Improvement Systemen Y1 - 2012 N1 - 1. Projektbericht zum Forschungsprojekt "Untersuchung der konzeptionellen Eigenschaften und Implementierungsanforderungen von Supply Chain Improvement Sytemen (SCIS)" PB - Alpen-Adria-Universität Klagenfurt CY - Klagenfurt ER - TY - GEN A1 - Winkler, Herwig A1 - Trenkenschuh, A. T1 - Handelsbeziehungen mit Unternehmen in Russland - ausgewählte Ergebnisse einer empirischen Untersuchung T2 - Industrie Management Y1 - 2012 SN - 1434-1980 VL - 28 IS - 2 SP - 15 EP - 18 ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - Considerations on a contemporary flexibility approach T2 - Research in Logistics and Production Y1 - 2012 SN - 2083-4942 VL - 2 IS - 2 SP - 147 EP - 161 ER - TY - GEN A1 - Winkler, Herwig A1 - Allmayer, Sabine T1 - Schnittstellenmanagement bei kundenindividueller Produktion T2 - Productivity Management Y1 - 2012 SN - 1434-2308 IS - 1 SP - 16 EP - 19 ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - A modeling approach for the evaluation of manufacturing flexibility T2 - International Journal of Business Research Y1 - 2012 SN - 1555-1296 VL - 12 IS - 1 SP - 69 EP - 77 ER - TY - GEN A1 - Winkler, Herwig A1 - Slamanig, Michael T1 - Management of product change projects T2 - International Journal of Services and Operations Management Y1 - 2012 VL - 11 IS - 4 SP - 481 EP - 500 ER - TY - GEN A1 - Winkler, Herwig T1 - Effizienzsteigerung in der Produktionslogistik T2 - Computerwelt Y1 - 2012 IS - 08.06.2012 ER - TY - GEN A1 - Winkler, Herwig T1 - Erste Versuche einer City-Logistik mit E-Fahrzeugen T2 - Kurier : Beilage Logistik Y1 - 2012 IS - 14.03.2012 ER - TY - GEN A1 - Winkler, Herwig T1 - Mehr Effizienz mit Supply Chain Management T2 - Computerwelt Y1 - 2012 IS - 09.03.2012 ER - TY - GEN A1 - Winkler, Herwig A1 - Slamanig, Michael T1 - Exploring and defining different forms of product change projects in high variety manufacturing environments T2 - European Journal of Management Y1 - 2013 IS - 1 SP - 23 EP - 32 ER - TY - RPRT A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - Praktische Relevanz ausgewählter Flexibilitätstypen und deren Treiber Y1 - 2013 PB - Alpen-Adria-Universität Klagenfurt CY - Klagenfurt ER - TY - GEN A1 - Winkler, Herwig T1 - Auf der Suche nach effizienten Wertschöpfungsketten T2 - Kurier : Beilage Logistik Y1 - 2013 IS - 20. März 2013 ER - TY - RPRT A1 - Winkler, Herwig A1 - Kuss, Clemens A1 - Wurzer, Thomas T1 - Supply Chain Improvement der Star Favorit Supply Chain bei FunderMax Y1 - 2013 PB - Alpen-Adria-Universität Klagenfurt CY - Klagenfurt ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - Using process capability analysis to evaluate supply chain flexibility based on order lead time and order processing cost deviations T2 - European Journal of Management Y1 - 2013 SN - 1555-4015 VL - 13 IS - 1 SP - 95 EP - 106 ER - TY - GEN A1 - Winkler, Herwig A1 - Slamanig, Michael T1 - Investigation of product change projects in companies with multi-variant serial production T2 - Journal of International Management Studies Y1 - 2013 IS - 1 SP - 65 EP - 74 ER - TY - GEN A1 - Winkler, Herwig A1 - Taschek, H. T1 - Steigerung der Energieeffizienz mit Manufacturing Execution Systemen (MES) T2 - Productivity Management KW - Engergieeffizienz Y1 - 2013 SN - 1868-8519 VL - 18 IS - 4 SP - 19 EP - 21 ER - TY - GEN A1 - Winkler, Herwig A1 - Allmayer, Sabine T1 - Interface management research in supplier-customer relationships: findings from a citation analysis of international literature T2 - Journal of Business Economics KW - Interface Y1 - 2013 U6 - https://doi.org/10.1007/s11573-013-0685-1 SN - 1861-8928 ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - A Citation Analysis of the Research on Manufacturing and Supply Chain Flexibility T2 - International Journal of Production Research (IJPR) KW - Manufacturing Y1 - 2013 VL - 51 IS - 11 SP - 3415 EP - 3427 ER - TY - CHAP A1 - Winkler, Herwig A1 - Wurzer, Thomas A1 - Kuss, Clemens A1 - Seebacher, Gottfried ED - Kramberger, Tomaž T1 - Improving Logistics Efficiency in Supply Chains using a Supply Chain Improvement System (SCIS) T2 - Proceedings of the 10th International Conference on Logistics and Sustainable Transport, 13–15 June 2013, Celje, Slovenia KW - Logistics Y1 - 2013 SP - 44 EP - 56 PB - Univerza v Mariboru, Fakulteta za logistiko CY - Celje ER - TY - GEN A1 - Winkler, Herwig A1 - Allmayer, Sabine T1 - Supply chain interface problems affecting productivity T2 - International Journal of Logistics Systems and Management : IJLSM Y1 - 2014 SN - 1742-7967 VL - 18 IS - 4 SP - 415 EP - 435 ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - Evaluating flexibility in discrete manufacturing based on performance and efficiency T2 - International Journal of Production Economics : IJPE Y1 - 2014 SN - 0925-5273 VL - 153 SP - 340 EP - 351 ER - TY - GEN A1 - Winkler, Herwig A1 - Allmayer, Sabine T1 - Exploring the influence of interorganizational interface problems on firm performance T2 - European Journal of Management : EJM Y1 - 2014 SN - 2378-8526 VL - 14 IS - 1 SP - 23 EP - 36 ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - Indicating the most influential manufacturing flexibility types in scientific research T2 - European Journal of Management : EJM Y1 - 2014 SN - 2378-8526 VL - 14 IS - 1 SP - 13 EP - 22 ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried A1 - Oberegger, Bernhard T1 - In-plant logistics efficiency valuation using discrete event simulation T2 - International Journal of Simulation Modelling : IJSIMM Y1 - 2015 U6 - https://doi.org/10.2507/IJSIMM14(1)6.289 SN - 1726-4529 VL - 14 IS - 1 SP - 60 EP - 70 ER - TY - GEN A1 - Winkler, Herwig A1 - Blöchl, Stefan J. A1 - Stemplinger, Christian T. T1 - Overall Equipment Effectiveness gezielt verbessern : Fallstudie zum Einfluss der OEE auf das operative Firmenergebnis T2 - Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF Y1 - 2014 SN - 0947-0085 VL - 109 IS - 11 SP - 830 EP - 834 ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - A capability approach to evaluate supply chain flexibility T2 - International Journal of Production Economics Y1 - 2015 U6 - https://doi.org/doi:10.1016/j.ijpe.2015.05.035 VL - 167 SP - 177 EP - 186 ER - TY - GEN A1 - Winkler, Herwig A1 - Stemplinger, Christian T. T1 - Instandhaltungswandel und dessen Auswirkungen. Empirische Untersuchung der Instandhaltungsanforderungen und deren Auswirkungen auf das Produktionssystem T2 - Industrie Management Y1 - 2015 SN - 1434-1980 VL - 31 SP - 37 EP - 40 ER - TY - GEN A1 - Winkler, Herwig A1 - Stemplinger, Christian T. T1 - Konzerninternes Performance Benchmarking in der Instandhaltung : eine Fallstudie im globalen Siebdruckproduktionsnetzwerk eines Automobilzulieferers T2 - Zeitschrift für wirtschaftlichen Fabrikbetrieb : (ZWF) Y1 - 2015 SN - 0947-0085 IS - 3 SP - 130 EP - 133 ER - TY - GEN A1 - Winkler, Herwig A1 - Busse, Martin A1 - Beyer, Jan T1 - Fertigungsstrukturwandel in KMU mittels Automatisierung T2 - Productivity Management Y1 - 2015 SN - 1868-8519 VL - 20 IS - 4 SP - 61 EP - 63 ER - TY - GEN A1 - Winkler, Herwig A1 - Seebacher, Gottfried T1 - Examination and determination of the most important supply chain flexibility types in literature T2 - Journal of International Management Studies : JIMS Y1 - 2014 SN - 1930-6105 VL - 14 IS - 1 SP - 49 EP - 58 ER - TY - GEN A1 - Winkler, Herwig A1 - Kuss, Clemens A1 - Wurzer, Thomas T1 - Investigating the relevance of supply chain improvement systems (SCIS) T2 - Logistics and Production (RLP) Y1 - 2013 SN - 2083-4942 VL - 3 IS - 4 SP - 265 EP - 278 ER - TY - CHAP A1 - Winkler, Herwig A1 - Tinello, Daniel T1 - Bionik in der Logistik : Träumerei oder umsetzbares Potential? T2 - Logistics Systems Engineering, 1. Wissenschaftlicher Industrielogistik-Dialog in Leoben, 26. - 27. September 2013 KW - Biotechnologie KW - Logistik KW - Fabrikplanung Y1 - 2013 SN - 978-3-86618-858-7 SP - 19 EP - 31 PB - Hampp CY - München [u.a.] ER - TY - CHAP A1 - Winkler, Herwig A1 - Kuss, Clemens T1 - Conceptual considerations for a real-time-supply chain efficiency assessment and monitoring T2 - Production and Operations Management Society, 26th Annual Conference, 08.05.-11.05.2015, Washington, D.C. Y1 - 2015 UR - https://www.pomsmeetings.org/confpapers/060/060-0186.pdf SP - 1 EP - 10 ER - TY - CHAP A1 - Winkler, Herwig A1 - Kuss, Clemens A1 - Wurzer, Thomas ED - Mieke, Christian T1 - Beurteilung und Verbesserung der Prozesseffizienz in Supply Chains T2 - Prozessinnovation und Prozessmanagement Y1 - 2013 SN - 978-3-8325-3512-4 SN - 3-8325-3512-8 SP - 127 EP - 150 PB - Logos Verlag CY - Berlin ER - TY - CHAP A1 - Winkler, Herwig A1 - Seebacher, Gottfried A1 - Oberegger, Bernhard ED - Mieke, Christian T1 - Effizienzbewertung in der Produktionslogistik anhand einer Simulationsstudie T2 - Logistikorientiertes Produktionsmanagement Y1 - 2014 SP - 97 EP - 116 PB - Logos Verlag CY - Berlin ER - TY - CHAP A1 - Winkler, Herwig A1 - Kaluza, Bernd ED - Siepermann, Christoph ED - Vahrenkamp, Richard ED - Siepermann, Markus T1 - Möglichkeiten der Integration von Performance- und Risikomanagement im SCM T2 - Risikomanagement in Supply Chains : Gefahren abwehren, Chancen nutzen, Erfolg generieren Y1 - 2015 SN - 978-3-503-15818-8 SP - 319 EP - 335 PB - Erich Schmidt Verlag CY - Berlin ET - 2. neu bearbeitete Auflage ER - TY - CHAP A1 - Winkler, Herwig ED - Piska, Christian M. ED - Lindner, Berthold T1 - Management der Abfallverwertung in Verwertungs- und Entsorgungsnetzwerken T2 - Abfallwirtschaftsrecht : Jahrbuch 2015 Y1 - 2015 SN - 978-3-7083-1037-4 SP - 301 EP - 317 PB - NWV Verlag CY - Wien ER - TY - CHAP A1 - Winkler, Herwig A1 - Obmann, Gottfried ED - Mieke, Christian T1 - Defizite im Lieferantenmanagement als Bremser der Innovationskraft – untersucht am Beispiel der österreichischen Papierindustrie T2 - Innovations- und Beschaffungsmanagement Y1 - 2015 SN - 978-3-8325-4088-3 SP - 31 EP - 52 PB - Logos Verlag Berlin CY - Berlin ER - TY - CHAP A1 - Winkler, Herwig A1 - Kuss, Clemens ED - Kramberger, Tomaž ED - Potočan, Vojko ED - Ipavec, Vesna Mia T1 - Using a Supply Chain Improvement System (SCIS) to Increase Supply Chain Efficiency T2 - Sustainable Logistics and Strategic Transportation Planning Y1 - 2016 SN - 978-152250001-8 SP - 437 EP - 456 PB - IGI Global CY - Hershey ER - TY - GEN A1 - Winkler, Herwig A1 - Zolle, Mario T1 - Finanzielle Supply Chains optimieren T2 - IDL Dialog Y1 - 2015 IS - 3 SP - 29 EP - 35 ER - TY - GEN A1 - Winkler, Herwig A1 - Stemplinger, Christian T. A1 - Mohn, Tobias T1 - Kontinuierlicher Verbesserungsprozess : Fallstudie zur Entwicklung eines KVP-Implementierungsmodells unter Berücksichtigung des operativen Spannungsfelds im Tagesgeschäft von Produktionsabteilungen T2 - Industrie Management Y1 - 2015 SN - 1434-1980 VL - 31 IS - 3 SP - 73 EP - 77 ER - TY - CHAP A1 - Winkler, Herwig A1 - Seebacher, Gottfried A1 - Oberegger, Bernhard ED - Obermaier, Robert T1 - Effizienzbewertung und -darstellung in der Produktion im Kontext von Industrie 4.0 T2 - Industrie 4.0 als unternehmerische Gestaltungsaufgabe : betriebswirtschaftliche, technische und rechtliche Herausforderungen Y1 - 2016 SN - 978-3-658-08164-5 U6 - https://doi.org/10.1007/978-3-658-08165-2_13 SP - 219 EP - 243 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - CHAP A1 - Batz, Aglaya A1 - Winkler, Herwig T1 - Network topologies to manage the globalization of innovation T2 - Proceedings of 27th POMS annual conference, Orlando 2016 Y1 - 2016 UR - https://www.pomsmeetings.org/ConfPapers/065/065-1909.pdf SP - 1 EP - 10 ER - TY - CHAP A1 - Batz, Aglaya A1 - Winkler, Herwig T1 - Theoretical considerations to reduce anomalies from the globalization of innovation T2 - Proceedings of 27th POMS annual conference, Orlando 2016 Y1 - 2016 UR - https://www.pomsmeetings.org/ConfPapers/065/065-0653.pdf SP - 1 EP - 10 ER - TY - CHAP A1 - Tinello, Daniel A1 - Winkler, Herwig A1 - Jodin, Dirk T1 - Biomimetics applied to logistics: Assignment of operational resources within ideal facillity layouts by applying Fibonacci, spider webs, nautilus shell and honeycombs T2 - Proceedings der 5th International Conference of Bionic Engineering, 21.06.-24.06.2016, Ningbo, China, abstract book Y1 - 2016 UR - https://www.researchgate.net/publication/304489099_Biomimetics_applied_to_logistics_Assignment_of_operational_resources_within_ideal_facility_layouts_by_applying_Fibonacci_spider_webs_nautilus_shell_and_honeycombs PB - ICBE ER - TY - CHAP A1 - Tinello, Daniel A1 - Winkler, Herwig A1 - Jodin, Dirk A1 - Toferer, Manfred T1 - Biomimetics applied to factory layout planning: Honeycombs as bio-inspiration to reduce internal transport costs in factories T2 - XXI International Conference on "Material Handling, Constructions and Logistics", 23rd – 25th September, 2015, MHCL '15 Y1 - 2016 SN - 978-86-7083-863-5 SP - 161 EP - 164 PB - University of Belgrade, Faculty of Mechanical Engineering CY - Belgrade ER - TY - GEN A1 - Winkler, Herwig T1 - Conceptual considerations for real-time supply chain efficiency monitoring T2 - Research in Logistics and Production Y1 - 2016 SN - 2083-4950 SN - 2083-4942 VL - 6 IS - 5 SP - 393 EP - 405 ER - TY - GEN A1 - Tinello, Daniel A1 - Jodin, Dirk A1 - Winkler, Herwig T1 - Biomimetics applied to factory layout planning: Fibonacci based patterns, spider webs and nautilus shell as bio-inspiration to reduce internal transport costs in factories T2 - CIRP Journal of Manufacturing Science and Technology Y1 - 2016 UR - http://dx.doi.org/10.1016/j.cirpj.2016.02.003 SN - 1755-5817 VL - 13 SP - 51 EP - 71 ER - TY - GEN A1 - Tinello, Daniel A1 - Knödl, Martin A1 - Jodin, Dirk A1 - Winkler, Herwig T1 - Study of biomimetics applied to logistics,material han-dling, SCM and manufacturing: A bibliometric analysis (1990-2013) T2 - Logistics Journal Y1 - 2017 U6 - https://doi.org/10.2195/lj_Rev_tinello_en_201701_01 SN - 1860 -7977 IS - 2017-01-09 ER - TY - RPRT A1 - Winkler, Herwig A1 - Lugert, Andreas T1 - Die Wertstrommethode im Zeitalter von Industrie 4.0 - Studienreport Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-41205 SN - 978-3-940471-29-1 PB - Brandenburgische Technische Universität, IKMZ, Universitätsbibliothek CY - Cottbus ; Senftenberg ER - TY - GEN A1 - Lugert, Andreas A1 - Winkler, Herwig T1 - Von der Wertstromanalyse zum Wertstrommanagement T2 - Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) Y1 - 2017 U6 - https://doi.org/10.3139/104.111703 SN - 0032-678X VL - 112 IS - 4 SP - 261 EP - 265 ER - TY - CHAP A1 - Winkler, Herwig A1 - Seebacher, Gottfried A1 - Oberegger, Bernhard ED - Obermaier, Robert T1 - Effizienzbewertung und -darstellung in der Produktion im Kontext von Industrie 4.0 T2 - Industrie 4.0 als unternehmerische Gestaltungsaufgabe : betriebswirtschaftliche, technische und rechtliche Herausforderungen Y1 - 2017 SN - 978-3-658-16526-0 SP - 219 EP - 243 PB - Springer Gabler CY - Wiesbaden ET - 2. korrigierte Auflage ER - TY - CHAP A1 - Winkler, Herwig ED - Winkler, Herwig ED - Berger, Ulrich ED - Schenk, Michael ED - Mieke, Christian T1 - Methodische Überlegungen zur Flexibilitätsbeurteilung in Wertschöpfungssystemen T2 - Flexibilisierung der Fabrik im Kontext von Industrie 4.0 Y1 - 2017 SN - 978-3-8325-4475-1 SP - 1 EP - 14 PB - Logos Verlag CY - Berlin ER - TY - CHAP A1 - Tinello, Daniel A1 - Winkler, Herwig T1 - Überlegungen zur Übertragung bionischer Systemdesignmuster auf die Fabriklayout- und Materialflussplanung T2 - Tagungsband zum 13. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik (WGTL), 20. und 21. September 2017 in Graz Y1 - 2017 SP - 153 EP - 161 PB - Technische Universität, Institut für Technische Logistik CY - Graz ER - TY - CHAP A1 - Winkler, Herwig A1 - Tinello, Daniel A1 - Drack, Manfred A1 - Gebeshuber, Ille A1 - Boley, Moritz ED - Zsifkovits, Helmut E. ED - Altendorfer-Kaiser, Susanne T1 - Bionik in der Logistik - umsetzbares Potential! T2 - Logistisches Produktionsmanagement, 4. Wissenschaftlicher Industrielogistik-Dialog in Loeben (WiLD) Y1 - 2017 SN - 978-3-7450-1631-4 SP - 125 EP - 139 PB - epubli CY - Berlin ER - TY - GEN A1 - Tinello, Daniel A1 - Winkler, Herwig T1 - Überlegungen zur Übertragung bionischer Systemdesignmuster auf die Fabriklayout- und Materialflussplanung T2 - Logistics Journal: Proceedings Y1 - 2017 UR - https://www.logistics-journal.de/proceedings/2017/4599/tinello_2017.pdf U6 - https://doi.org/10.2195/lj_Proc_tinello_de_201710_01 SN - 2192-9084 ER - TY - CHAP A1 - Richter, Martin A1 - Winkler, Herwig T1 - Flow Shop Scheduling Optimization in the Chipboard Industry: A Simulation-based Analysis using Priority Dispatching Rules T2 - 24th International Conference on Production Research (ICPR 2017) N2 - This paper gives insights on the usability of single priority and multi-criteria dispatching rules for production scheduling based on the results for a German chipboard manufacturing plant. A discrete-event simulation of the manufacturing process has been modeled to compare different priority rules with an expert-based sequence for a real set of jobs. The simulation results show that using one single or multi criteria priority dispatching rule on the total production system basically leads to a poor performance, whereas using different rules for each machine will enhance the overall performance. Higher performance can be achieved by the expert based scheduling and individual multi criteria dispatching rules. Hence, a dynamic modification of the production schedule by switching the dispatching rules according to the current performance is proposed, considering unforeseen disturbances. KW - Flow shop scheduling problem KW - production scheduling KW - priority dispatching rules KW - discrete event simulation KW - two-machine flow shop Y1 - 2018 SN - 978-1-60595-507-0 U6 - https://doi.org/10.12783/dtetr/icpr2017/17625 SP - 296 EP - 301 PB - DEStech Publications CY - Lancaster, Pennsylvania ER - TY - CHAP A1 - Hermann, Mandy A1 - Tinello, Daniel A1 - Winkler, Herwig T1 - Bio-inspired factory layouts: a morphological approach for investigating design criteria T2 - 24th International Conference on Production Research (ICPR 2017) KW - Bio-inspired factory layout KW - material flow KW - efficiency KW - flexibility KW - morphological analysis Y1 - 2018 SN - 978-1-60595-507-0 U6 - https://doi.org/10.12783/dtetr/icpr2017/17631 SP - 330 EP - 335 PB - DEStech Publications CY - Lancaster, Pennsylvania ER - TY - GEN A1 - Tinello, Daniel A1 - Winkler, Herwig A1 - Drack, Manfred A1 - Gebeshuber, Ille A1 - Bevanda-Rauch, Danijela T1 - Bio-inspirierte Fabriklayouts, Natur-Modell für einen effizienten Materialfluss T2 - Hebezeuge, Fördermittel : technische Logistik Y1 - 2018 UR - http://www.hebezeuge-foerdermittel.de/sites/default/files/Fachartikel/PDF/HF_2018_03_Bio-inspirierte-Fabriklayouts.pdf SN - 0017-9442 IS - 3 SP - 34 EP - 36 ER - TY - GEN A1 - Lugert, Andreas A1 - Batz, Aglaya A1 - Winkler, Herwig T1 - Empirical assessment of the future adequacy of value stream mapping in manufacturing industries T2 - Journal of Manufacturing Technology Management Y1 - 2018 UR - https://www.emeraldinsight.com/doi/abs/10.1108/JMTM-11-2017-0236 U6 - https://doi.org/10.1108/JMTM-11-2017-0236 SN - 1741-038X VL - 29 IS - 5 SP - 886 ER - TY - CHAP A1 - Tinello, Daniel A1 - Boley, Moritz A1 - Winkler, Herwig T1 - Beitrag zum Transfer bionischer Systemdesignmuster auf die Fabriklayout- und Materialflussplanung T2 - 27. Deutscher Materialfluss-Kongress 2018, Garching bei München, Deutschland Y1 - 2018 SN - 978-3-18-092325-3 PB - VDI-Verlag CY - Düsseldorf ER - TY - GEN A1 - Kunath, Martin A1 - Winkler, Herwig T1 - Integrating the Digital Twin of the manufacturing system into a decision support system for improving the order management process T2 - Procedia CIRP N2 - Today´s manufacturing companies need to adapt more than ever to changing customer needs, rising resource costs and increasing uncertainties. A promising way to face these issues is the digitalization of the manufacturing system. Key elements of the digitalization are cyber-physical systems (CPS) and the cyber-physical production system (CPPS). In the last years, the Digital Twin has become a synonym for the cyber-part of CPS and CPPS. In this paper, a conceptual framework and potential applications of a decision support system for the order management process are discussed, that is based on the Digital Twin of the manufacturing system. KW - Digital Twin KW - Order Management Process KW - Industry 4.0 KW - Digitalization KW - Decision Support System Y1 - 2018 U6 - https://doi.org/10.1016/j.procir.2018.03.192 SN - 2212-8271 VL - 72 SP - 225 EP - 231 ER - TY - GEN A1 - Lubosch, Marco A1 - Winkler, Herwig T1 - Industrial scheduling with Monte Carlo tree search and machine learning T2 - Procedia CIRP N2 - Although scheduling has been studied for decades, no general approach for solving industrial scheduling problems has yet been found. The variety of production systems often requires unique modifications of scheduling algorithms to meet industrial requirements. To address this challenge, an algorithm is proposed that combines Monte Carlo tree search and machine learning. It tries to eliminate the need for problem-specific knowledge while improving the production system’s performance. The algorithm has been investigated using a reentrant flow-shop problem. The results show that a combination of random-based search algorithms and machine learning is a promising way to handle complex industrial scheduling problems. KW - Scheduling KW - Monte Carlo tree search KW - machine learning KW - flow -shop Y1 - 2018 U6 - https://doi.org/10.1016/j.procir.2018.03.171 SN - 2212-8271 VL - 72 SP - 1283 EP - 1287 ER - TY - GEN A1 - Lugert, Andreas A1 - Winkler, Herwig A1 - Völker, Kevin T1 - Dynamization of Value Stream Management by technical and managerial approach T2 - Procedia CIRP N2 - Value Stream Mapping (VSM) is a widely known lean tool to improve manufacturing systems. Despite having many benefits VSM also has some shortcomings in today’s more dynamic production environment. To eliminate these weaknesses and to further increase flexibility, we developed a dynamic value stream management concept taking both the recent digitalization technologies and organizational structures into account. Therefore, we designed a concept with two dimensions: on one hand a technical infrastructure facing Industry 4.0, on the other hand a management approach describing involved roles and relevant day-to-day activities. The analysis of value streams is facilitated by data analytics and simulation using real-time data. Our contribution possesses first insights in the conceptual considerations. KW - Industry 4.0 KW - Lean Management KW - Toyota Production System KW - Value Stream KW - Value Stream Management KW - Value Stream Mapping Y1 - 2018 U6 - https://doi.org/10.1016/j.procir.2018.03.284 SN - 2212-8271 VL - 72 SP - 701 EP - 706 ER - TY - RPRT A1 - Kaucher, Christian A1 - Kunath, Martin A1 - Winkler, Herwig T1 - Zukunft elektrochemischer Speicher für Hybridantriebe - Studienreport am Beispiel von Hybridrangierlokomotiven N2 - Die Elektrifizierung des Antriebsstrangs ist derzeit eines der großen Zukunftsthemen der Automobilindustrie. Das Thema ist nicht nur für den Automobilsektor relevant, sondern bietet auch Potential für andere Bereiche der Mobilität. Ein Beispiel ist die Umrüstung von Diesel-Rangierlokomotiven und Diesel-Triebwagen auf hybride Antriebe. In verschiedenen Projekten konnte bereits gezeigt werden, dass sich Emissionen und Kraftstoffverbrauch so erheblich reduzieren lassen. Als wichtigste Komponente des hybriden oder elektrischen Antriebsstrangs ist der Energiespeicher zu sehen. Er bestimmt wesentlich über die erzielbare Reichweite sowie die Verbrauchs- und Leistungsparameter des Fahrzeugs. In dieser Studie wird daher ein Überblick über aktuell verfügbare und sich in Entwicklung befindende Speichertechnologien sowie eine Einschätzung zu deren Weiterentwicklung gegeben. Der Fokus liegt dabei auf der Eignung der Speicher für die Anwendung in Hybridrangierlokomotiven. Zu diesem Zweck wurde einerseits eine umfassende Recherche in aktueller Fachliteratur durchgeführt. Andererseits erfolgte eine Befragung von Experten für elektrochemische Speicher aus Wissenschaft und Industrie. Darauf aufbauend erfolgte eine Bewertung der Eignung aktueller und zukünftiger Speichertechnologien für die Verwendung in Hybridrangierlokomotiven. Zur Visualisierung der zukünftigen Entwicklungen wurde eine Produkt- und Technologie-Roadmap für die relevanten Technologien erstellt. KW - Elektrochemische Speicher KW - Elektromobilität KW - Hybridantriebe KW - Rangierlokomotive KW - Roadmap KW - Elektrochemische Energiequelle KW - Elektrolokomotive KW - Energiespeicherung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-45213 PB - Brandenburgische Technische Universität, IKMZ, Universitätsbibliothek CY - Cottbus ; Senftenberg ER - TY - GEN A1 - Batz, Aglaya A1 - Kunath, Martin A1 - Winkler, Herwig T1 - Discrepancies between Cluster Services and SMEs’ Needs Constraining the Creation of a Culture of Innovation amidst Industry 4.0 T2 - LogForum N2 - Background: SMEs performance and their innovativeness are associated to their participation in innovation networks. Thus, SMEs tend to join clusters aiming to accelerate their process of innovation, catch up with the dynamics of the industry and increase their probability to access external knowledge and resources. Consequently, promoting a collaborative atmosphere by boosting the synergies between cluster managers and SMEs will foment a culture of innovation. Moreover, the inclusion of new technologies, and especially the advent of industry 4.0, is facilitating collaboration, while at the same time accelerating the development of innovation outcomes and setting new challenges for SMEs. This contribution identifies discrepancies between offer (clusters) and demand (SMEs), hindering the creation of a culture of innovation and highlights critical points, where both SMEs and Clusters, may gain from a proper interaction. Methods: 120 empirical studies analyzing innovation determinants have been evaluated. Based on these determinants and stressing the importance of SMEs participating in collaborative-networked innovation actions, a concept for supporting the creation of a culture of innovation is proposed. This concept is enhanced by exploring potential benefits of industry 4.0 technologies supporting the acquisition, assimilation and transformation of knowledge into innovation. Additionally, in order to gain an insight about the interrelation between clusters and SMEs towards the creation of an innovation culture, an empirical study has been conducted. Results: The descriptive analysis shows that communication problems and discrepancies between cluster organizations and SMEs are evident. Moreover, the understanding of SMEs on the requirements for building an innovation culture is rather low. Although cluster organizations tend to generate services supporting their members’ innovation processes, a gap between offer and demand is observable among all phases defined in the concept. Conclusions: we suggest that cluster managers could play a more preponderant role as orchestrators of innovation by adjusting their services to the requirements of each innovation process phase. Moreover, this work highlights inconsistencies between offer (clusters) and demand (SMEs) constraining the creation of a culture of innovation, particularly stressing communication problems. Hence, the integration of innovative communication channels, having the potential to increase the effectiveness of communication strategies between cluster managers and SMEs, are key for facilitating a culture of innovation in organizations, especially in SMEs. In this case, we suggest exploring different elements around the industry 4.0 in order to define the characteristics of such communication channels, particularly those supporting the acquisition, assimilation and transformation of internal and external knowledge into innovation. KW - determinants of innovation KW - culture of innovation KW - innovation networks KW - cluster management KW - Small and Medium Enterprises (SMEs) Y1 - 2018 UR - http://www.logforum.net/pdf/14_3_9_18.pdf SN - 1895-2038 SN - 1734-459X VL - 14 IS - 3 SP - 387 EP - 405 ER - TY - GEN A1 - Hermann, Mandy A1 - Winkler, Herwig A1 - Tinello, Daniel T1 - Elaboration and analysis of key figure-based approaches for the efficiency assessment of traditional and bio-inspired factory layouts T2 - Procedia CIRP N2 - Most factory layouts based on stable markets. Companies usually do not consider further development or growth processes, which leads to inefficiencies. Literature reviews have shown, that living systems have the ability to efficiently and flexibly cope with short- and long-term changes. Consequently, this paper shows firstly, as an overview of own studies, new efficient approaches as examples for factory and material flow planning, using biomimetics. Secondly and as the focus of the paper, approaches for the efficiency measurement and assessment are analyzed and examined for their suitability to the context of different factory layouts and their material flows. Based on these results, traditional and bio-inspired factory layouts should be comparable in terms of their efficiency figures. KW - Logistics KW - Factory KW - Analysis KW - Efficiency Assessment Y1 - 2018 U6 - https://doi.org/10.1016/j.procir.2018.03.052 VL - 72 SP - 732 EP - 738 ER - TY - GEN A1 - Gebauer, Marc A1 - Lorbeer, Jenny A1 - Winkler, Herwig T1 - Erfassung und Analyse der Geschäftsmodelle in der ostdeutschen Textilindustrie T2 - Melliand-Textilberichte KW - Geschäftsmodelle KW - Textilindustrie Y1 - 2018 SN - 0341-0781 VL - 99 IS - 3 SP - 132 EP - 134 ER - TY - CHAP A1 - Winkler, Herwig A1 - Stopper, Christina T1 - Green Logistics – an empirical comparison between industrial companies and logistics service providers T2 - The 9th International Conference on Production Research – Americas 2018 N2 - Today, companies are forced to improve their environmental position due to new regulations, the general attitude of the society and special ecological customer requirements. These companies have to plan measures to reduce negative environmental impacts from production processes, improve the consumption of various resources and mind the use of energy. The overall goal is to stabilize the ecological balance, but remain economically viable. Therefore, more and more industrial companies cooperate with their suppliers and logistics service providers to realize better ecological results and be more effective and efficient at the economic level. In this paper we give some insights into the results of a study where we analyzed the status quo of the implementation of Green Logistics in Austria. The results highlight that in many cases ecological measures are only implemented if a simultaneous improvement of the economic situation is given. KW - Green Logistics KW - empirical comparison KW - industrial companies KW - logistics service providers Y1 - 2018 UR - https://icpramericas2018.wixsite.com/icpr/conference-proceedings N1 - Paper unter „Efficiency and Sustainability“ SP - 1 EP - 7 ER - TY - GEN A1 - Lugert, Andreas A1 - Winkler, Herwig T1 - Zukunftsfähigkeit der Wertstrommethode im Kontext von Industrie 4.0 T2 - Logistics Journal Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-14-47985 UR - https://www.logistics-journal.de/not-reviewed/2019/01/4798 SN - 1860-5923 ER - TY - CHAP A1 - Kunath, Martin A1 - Winkler, Herwig ED - Schröder, Meike ED - Wegner, Kirsten T1 - Dynamische Auftragsabwicklung in Netzwerken mit Hilfe digitaler Fertigungsplattformen T2 - Logistik im Wandel der Zeit-Von der Produktionssteuerung zu vernetzten Supply Chains : Festschrift für Wolfgang Kersten zum 60. Geburtstag N2 - Mehr und mehr individualisierte Produkte, kürzer werdende Produktlebenszyklen und die steigende Anzahl an Produktvarianten führen zu einer zunehmenden Komplexität des Auftragsabwicklungsprozesses in vielen Unternehmen. Diese Komplexität steigt insbesondere bei Auftragsfertigern, die ihre Produkte kundenspezifisch aus definierten Komponenten herstellen und/oder entwickeln. Sind zur Herstellung der Produkte individualisierte Komponenten notwendig, die von einem Lieferanten bezogen werden, erhöht sich zusätzlich die Komplexität der Auftragsabwicklung über die gesamte Lieferkette. KW - adaptives Assistenzsystem KW - Digitalisierung KW - Auftragsabwicklungsprozess KW - Industrie 4.0 KW - Agentensysteme Y1 - 2019 UR - http://link.springer.com/10.1007/978-3-658-25412-4_18 SN - 978-3-658-25411-7 SN - 978-3-658-25412-4 U6 - https://doi.org/10.1007/978-3-658-25412-4_18 SP - 381 EP - 400 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - RPRT A1 - Kunath, Martin A1 - Winkler, Herwig T1 - Untersuchung des Status quo betrieblicher Entscheidungsunterstützungssysteme im Zuge der fortschreitenden Digitalisierung N2 - Im Zuge der zunehmenden Digitalisierung und Vernetzung von Geschäftsprozessen innerhalb und außerhalb des Unternehmens sowie den steigenden Dynamiken im gesamten Auftragsabwicklungsprozess sind die Möglichkeiten und Grenzen klassischer betrieblicher Informationssysteme zur Unterstützung der Entscheidungsträger zu hinterfragen. Neben gängigen Tabellenkalkulationstools setzten Unternehmen bisher verschiedene Informationssysteme ein. Klassische Systeme sind u.a. Enterprise Resource Planning (ERP) - Systeme, Supply Chain Management (SCM) - Systeme bzw. Advanced Planning and Scheduling (APS) - Systeme sowie Manufacturing Execution Systeme (MES). Bisherige Studien konnten bereits verschiedene Probleme gängiger Systeme im Kontext der Implementierung, der Systemleistung, des Systemnutzens und der Interoperabilität aufzeigen. Insbesondere stärker projektorientierte Unternehmen mit kundenindividueller Auftragsfertigung kritisieren die fehlende Anpassungsfähigkeit der Systeme an die veränderten Unternehmensprozesse. Unternehmen setzen daher teilweise auf individuell entwickelte Systeme, um den Problemen entgegen zu wirken. Zur Untersuchung des Status quo betrieblicher Entscheidungsunterstützungssysteme wurde eine Studie durchgeführt, welche einen aktualisierten Blick auf die Probleme und Anforderungen zur Verbesserung der Systeme ermöglicht. Die Ergebnisse wurden für die einzelnen Systeme und zusätzlich unter Berücksichtigung des im Unternehmen vorliegenden Auftragsabwicklungstyps analysiert. Es zeigt sich, dass insbesondere die Unterstützung bei Problemen und Störungen im Auftragsabwicklungsprozess verbessert werden muss. KW - Auftragsabwicklungsprozess KW - Betriebliche Informationssysteme KW - Studie KW - Umfrage Enterprise Resource Planning KW - Manufacturing Execution System KW - Supply Chain Management Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-48229 PB - Brandenburgische Technische Universität, IKMZ, Universitätsbibliothek CY - Cottbus ; Sentenberg ER - TY - GEN A1 - Gebauer, Marc A1 - Busse, Martin A1 - Lehmann, Marlon Antonin A1 - Winkler, Herwig A1 - Berger, Ulrich ED - Schenk, Michael T1 - Lebenszyklusorientierte Betrachtung von technologiebasierten Geschäftsmodellinnovationen am Beispiel einer industriellen Wäscherei T2 - 20. Forschungskolloquium am Fraunhofer IFF INDUSTRIE 4.0 - (R)EVOLUTION DER PRODUKTION KW - Geschäftsmodellinnovation KW - Lebenszyklus KW - Wäscherei Y1 - 2019 UR - https://www.iff.fraunhofer.de/de/publikationen/forschungskolloquium.html SP - 17 EP - 26 ER - TY - GEN A1 - Lugert, Andreas A1 - Winkler, Herwig T1 - WiSt-Fallstudie: Verbesserung des Produktionssystems mit der Wertstrommethode, Teil 1: Ausgangssituation und Aufgaben T2 - Wirtschaftswissenschaftliches Studium : WiSt ; Zeitschrift für Studium und Forschung N2 - Mit der Wertstrommethode lassen sich Produktivität und Effizienz des Produktionssystems steigern. Dies geschieht durch Schaffung von Transparenz und Aufdeckung möglicher Optimierungspotentiale. Die Fallstudie zeigt, wie die Methode systematisch anzuwenden ist und welche Erfolge sich durch sie erzielen lassen. Außerdem wird die Notwendigkeit eines fortwährenden Wertstrommanagements deutlich. Y1 - 2019 SN - 0340-1650 VL - 48 IS - 6 SP - 64 EP - 68 ER - TY - GEN A1 - Kunath, Martin A1 - Winkler, Herwig T1 - Usability of Information Systems to Support Decision Making in the Order Management Process T2 - Procedia CIRP N2 - In today’s business environment companies are forced to improve transparency as well as accelerate and digitalize all steps of the order management process. Enterprise Resource Planning (ERP) systems and further information systems have become indispensable to implement an efficient order processing. Scientific papers have already summarized the main problems of these systems. For this paper a survey was carried out showing the suitability of information systems with a focus on ERP systems for decision support in the order management process for a given product delivery strategy. The results show that particularly the support in defining solutions needs to be improved. KW - Order Management Process KW - Information Systems KW - Enterprise Ressource Planning KW - Digitalization KW - Survey Y1 - 2019 U6 - https://doi.org/10.1016/j.procir.2019.03.056 VL - 81 SP - 322 EP - 327 ER - TY - GEN A1 - Richter, Martin A1 - Winkler, Herwig A1 - Kaucher, Christian A1 - Sarram, Amirhossein T1 - Investigation and analysis of accumulators for the use of electrochemical storage in hybrid shunting locomotives T2 - Procedia CIRP N2 - This paper evaluates storage batteries with respect to usage in hybrid shunting locomotives. Topics are the status quo of existing technologies as well as future electrochemical storage technologies. A target system is used to evaluate the technologies. Furthermore, relevant battery characteristics for the usage in hybrid shunting locomotives have been identified. The necessary data have been retrieved from current literature (document analysis) and by a survey made with scientific and industrial experts. The results of the study show, that batteries of the lithium-ion-technology with a lithium-titanate anode and a lithium-iron-phosphate cathode are currently the most suitable batteries for the use in hybrid shunting locomotives. Promising future technologies are under investigation, but these technologies are several years away from their market entry. KW - Current status of batteries KW - future technologies KW - relevant charactristics of batteries for hybrid locomotives KW - battery technologies Y1 - 2019 U6 - https://doi.org/10.1016/j.procir.2019.03.243 SN - 2212-8271 VL - 81 SP - 1010 EP - 1015 ER - TY - GEN A1 - Lugert, Andreas A1 - Winkler, Herwig T1 - Wertstrom – Wertstrommethode – Wertstrommanagement : Wie der Wertstrom systematisch definiert, analysiert und optimiert werden kann und welche Vorteile Wertstrommanagement bietet T2 - Wirtschaftswissenschaftliches Studium : WiSt ; Zeitschrift für Studium und Forschung N2 - Der Wertstrom wird definiert als die Summe aller Wertobjekte. Die Wertstrommethode ist als elementarer Bestandteil des Toyota-Produktionssystems in produzierenden Unternehmen weit verbreitet. Im Fokus stehen dabei Gestaltung und Optimierung des Wertstroms. Durch systematische Anwendung der Methode werden Verschwendungen identifiziert, Optimierungspotentiale aufgedeckt und die Produktivität gesteigert. Y1 - 2019 SN - 0340-1650 VL - 48 IS - 6 SP - 4 EP - 11 ER - TY - CHAP A1 - Kunath, Martin A1 - Winkler, Herwig ED - Obermaier, Robert T1 - Adaptive Assistenzsysteme zur Entscheidungsunterstützung für die dynamische Auftragsabwicklung: Konzeptionelle Überlegungen und Anwendungsszenarien unter Berücksichtigung des Digitalen Zwillings des Produktionssystems T2 - Handbuch Industrie 4.0 und Digitale Transformation N2 - Der Auftragsabwicklungsprozess ist in produzierenden Unternehmen durch eine erhöhte Komplexität infolge der zunehmenden Variantenvielfalt und der steigenden Anforderungen an individualisierte Produkte gekennzeichnet. Diese Komplexität führt zu Intransparenz bei Entscheidungen im Produktionsvollzug. Weiterhin verursachen verschiedene Prozessdynamiken, z. B. unvorhergesehene Störungen, kurzfristige und unregelmäßige Bestellungen sowie nachträgliche Kundenänderungswünsche Störungen in der Auftragsabwicklung. KW - Digitaler Zwilling KW - Auftragsabwicklungsprozess KW - Industrie 4.0 KW - Dynamiken KW - Echtzeit-Abbild Y1 - 2019 SN - 978-3-658-24575-7 SN - 978-3-658-24576-4 U6 - https://doi.org/10.1007/978-3-658-24576-4_12 SP - 269 EP - 294 PB - Springer Gabler CY - Wiesbaden ET - 1. Auflage ER - TY - GEN A1 - Jeglinsky, Vinzenz A1 - Winkler, Herwig T1 - Untersuchungen von Entscheidungsprozessen im Zuge der Digitalisierung T2 - Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) N2 - Die Digitalisierung produzierender Unternehmen schreitet voran. Dennoch bestehen entlang des Entscheidungsprozesses zur Umsetzung von Digitalisierungsvorhaben zahlreiche Hindernisse. Zum zielgerichteten Auflösen der vorhandenen Hindernisse ist ein auf den Besonderheiten des Entscheidungsprozesses fokussierter Ansatz notwendig, der die Umsetzung der Vorhaben beschleunigt, Ressourcen schont und die Entscheidungsqualität verbessert. KW - Entscheidungsprozesse KW - Digitalisierung Y1 - 2019 U6 - https://doi.org/10.3139/104.112116 VL - 114 IS - 7-8 SP - 488 EP - 495 ER - TY - GEN A1 - Tangour, Cyrine A1 - Gebauer, Marc A1 - Fischer, Luise A1 - Winkler, Herwig T1 - Digital Business Model Patterns of Big Pharmaceutical Companies - A Cluster Analysis T2 - DIGITAL ECONOMY. Emerging Technologies and Business Innovation 4th International Conference, ICDEc 2019 Beirut, Lebanon, April 15-18, 2019 Proceedings Y1 - 2019 UR - https://link.springer.com/content/pdf/10.1007%2F978-3-030-30874-2.pdf SN - 978-3-030-30874-2 SP - 397 EP - 412 PB - Springer ER - TY - GEN A1 - Kunath, Martin A1 - Winkler, Herwig T1 - Interaktionsorientierte Organisationsgestaltung T2 - Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) Y1 - 2020 UR - https://www.hanser-elibrary.com/doi/10.3139/104.112247 U6 - https://doi.org/10.3139/104.112247 SN - 0947-0085 VL - 115 IS - 3 SP - 115 EP - 118 ER - TY - RPRT A1 - Jeglinsky, Vinzenz A1 - Winkler, Herwig T1 - Untersuchung von Hindernissen zur Digitalisierung in der industriellen Produktion Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-51588 PB - Brandenburgische Technische Universität, IKMZ, Universitätsbibliothek CY - Cottbus ; Senftenberg ER - TY - GEN A1 - Bartsch, Devis A1 - Winkler, Herwig ED - Kersten, Wolfgang ED - Blecker, Thorsten ED - Ringle, Christian M. T1 - Blockchain technology in Germany: an excerpt of real use cases in logistics industry T2 - Data Science and Innovation in Supply Chain Management : How Data Transforms the Value Chain N2 - Purpose: Due to the large number of intermediaries in logistics networks there is avariety of possible failures, frictions and waste of time and money among the logisticsprocess chain. With the ability to provide data securely in near real-time, liketrack and tracing data of goods to every participant, the Blockchain-Technology(BCT) can help to solve these problems. Methodology: A structured literature analysis has been executed by using the databasesWeb of Science and Science Direct to find out current intermediary´s functionsand real use cases. In addition, available other sources, like manufacturer websites,blog entries or whitepapers are searched for specific blockchain-based applicationsinvented and used by German companies. The identified use cases are then qualitativelyanalyzed. Findings: The first results showed that most of the business cases are still in the conceptphase or are merely ideas how the BCT could solve existing problems. Additionally,we got results on the distribution of applications and economic benefits alongthe logistics chain. Furthermore, important conclusions on implementation problemscan be derived from this. Originality: In order to maintain Germany´s top economic position, it is necessaryto push ahead with the adaption of the BCT. Our analysis contains first results in thearea of real blockchain use cases of German companies. Initial comparisons betweencurrently used and blockchain-based logistics networks are also possible. KW - Logistics ; Industry 4.0 ; Digitalization ; Innovation ; Supply Chain Management ; Artificial Intelligence ; Data Science Y1 - 2020 SN - 978-3-753123-46-2 U6 - https://doi.org/10.15480/882.3111 SN - 2365-5070 SP - 699 EP - 735 PB - epubli CY - Berlin ER - TY - GEN A1 - Stockmann, Christian A1 - Winkler, Herwig T1 - Bedeutung der Robustheit von Produktionssystemen T2 - ZWF Y1 - 2021 U6 - https://doi.org/10.1515/zwf-2021-0028 SN - 0947-0085 VL - 116 IS - 3 SP - 144 EP - 148 ER - TY - GEN A1 - Berneis, Moritz A1 - Bartsch, Devis A1 - Winkler, Herwig T1 - Applications of Blockchain Technology in Logistics and Supply Chain Management—Insights from a Systematic Literature Review T2 - Logistics Y1 - 2021 U6 - https://doi.org/10.3390/logistics5030043 SN - 2305-6290 VL - 5 IS - 3 ER - TY - RPRT A1 - Stockmann, Christian A1 - Winkler, Herwig T1 - Robustheit in Produktionssystemen aus Sicht der industriellen Praxis KW - Industrielle Praxis KW - Produktion KW - Produktionssysteme KW - Robustheit KW - Umfrage KW - Industrial Practice KW - Manufacturing KW - Production KW - Production Systems KW - Robustness KW - Survey Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:co1-opus4-52414 PB - Brandenburgische Technische Universität, IKMZ, Universitätsbibliothek CY - Cottbus ; Senftenberg ER - TY - GEN A1 - Berneis, Moritz A1 - Winkler, Herwig T1 - Value Proposition Assessment of Blockchain Technology for Luxury, Food, and Healthcare Supply Chains T2 - Logistics N2 - Background: In relevant research, blockchain technology (BCT) is credited with great potential for supply chain management (SCM). However, even after more than 10 years of the technology’s existence, it is barely used for any self-sustaining applications. This raises the question of why BC cannot prevail against its alternatives. With this paper we want to identify criteria by which the added value of BCT can be measured. Furthermore, we want to evaluate how well the different supply chains (SC) exploit the added values of BCT. Methods: For this, we identified real-world examples and case studies for luxury, food, and healthcare SCs. These examples are described in detail and then analyzed for their added value compared to possible alternatives. Results: The results show that in the clusters of food and healthcare SCs, no general added value of BC over current best-practice solutions could be verified. Luxury SCs manage valuable products that are typically traded in small quantities. It is within this cluster that the implementation of BC can be justified best. Conclusions: In conclusion, this study shows that the application of BCT is especially beneficial for goods with a high value and low trade volume. In addition, the interface between reality and the digital twin should be as secure as the database or BC solution itself. Furthermore, the demand for transparency and immutability of data should be more important than the need to protect sensitive data. Finally, SC participants, especially the end customer, must also be able to appreciate the advantages of BCT. KW - blockchain technology KW - Smart Contracts KW - logistics KW - supply chain management KW - value proposition assessment Y1 - 2021 U6 - https://doi.org/10.3390/logistics5040085 SN - 2305-6290 VL - 5 IS - 4 SP - 1 EP - 18 ER - TY - GEN A1 - Berneis, Moritz A1 - Winkler, Herwig T1 - Fallstudie zur Fabrikplanung im Greenfield T2 - WiSt Wirtschaftswissenschaftliches Studium Y1 - 2022 UR - https://rsw.beck.de/zeitschriften/wist/das-aktuelle-heft SN - 0340-1650 VL - 51 IS - 1 SP - 58 EP - 63 ER - TY - GEN A1 - Kuteyi, Damilola A1 - Winkler, Herwig T1 - Logistics Challenges in Sub-Saharan Africa and Opportunities for Digitalization T2 - Sustainability N2 - Improvements in logistics performance are considered to be a significant driver of economic growth. Digitalization in logistics, which includes enhanced tracking systems, digitized flows of information, artificial intelligence and automation, has further enabled globalized trade. However, Sub-Saharan African (SSA) economies, majorly export-commodity-dependent, still lag behind, grappling with inadequate policy frameworks, huge infrastructure deficits and trade barriers which result in a broken supply chain that negatively impacts growth. This study aims to investigate existing challenges in Sub-Saharan Africa, the potentials for the region to leapfrog traditional supply chain practices and adopt digital technologies, by evaluating previous findings in a systematic manner and augmenting these findings through semi-structured interviews. Systematic literature analysis conducted on published academic literature within a specific period and based on predefined criteria resulted in 287 articles being used for the final analysis. The most common logistics challenges and potential solutions have been identified. Semi-structured interviews with logistics service providers in the region have been conducted to establish the findings highlighted in the systematic literature review. The interviews showed that human capital training is a major factor when adopting digital technologies, and a focus on infrastructure investments, regulatory and institutional framework improvements will boost economic growth in Sub-Saharan Africa. KW - digitalization KW - industry 4.0 KW - logistics KW - sub-Saharan Africa Y1 - 2022 UR - https://www.mdpi.com/2071-1050/14/4/2399/htm U6 - https://doi.org/10.3390/su14042399 SN - 2071-1050 VL - 14 IS - 4 ER - TY - GEN A1 - Stockmann, Christian A1 - Winkler, Herwig T1 - Robustness of production systems: Evidence from the German manufacturing industry T2 - Journal of Engineering and Technology Management Y1 - 2022 UR - https://www.sciencedirect.com/science/article/pii/S0923474822000029 U6 - https://doi.org/10.1016/j.jengtecman.2022.101672 SN - 0923-4748 VL - Vol. 63 ER - TY - CHAP A1 - Jeglinsky, Vinzenz A1 - Winkler, Herwig ED - Baumann, Sabine T1 - Improved decisions for digitalization projects in digital business ecosystems T2 - Handbook on Digital Business Ecosystems. Strategies, Platforms, Technologies, Governance and Societal Challenges Y1 - 2022 UR - https://www.elgaronline.com/view/edcoll/9781839107184/9781839107184.00028.xml SN - 978-1-83910-719-1 SN - 978-1-83910-718-4 U6 - https://doi.org/10.4337/9781839107191.00028 SP - 307 EP - 326 PB - Edward Elgar Publishing Ltd (Verlag) CY - Chaltenham ER - TY - CHAP A1 - Winkler, Herwig A1 - Mielke, Jonas ED - Roth, Stefan ED - Corsten, Hans T1 - Adaptive Assistenzsysteme zur Entscheidungsunterstützung im Produktionsumfeld T2 - Handbuch Digitalisierung Y1 - 2022 SN - 978-3-8006-6562-4 SP - 651 EP - 672 PB - Vahlen CY - München ER - TY - GEN A1 - Berneis, Moritz A1 - Winkler, Herwig T1 - Fallstudie zur Fabrikplanung im Greenfield. Teil 2: Lösungshinweise T2 - WiSt Wirtschaftswissenschaftliches Studium Y1 - 2022 U6 - https://doi.org/10.15358/0340-1650-2022-2-3-63 SN - 0340-1650 VL - 51 IS - 2-3 SP - 63 EP - 71 ER - TY - GEN A1 - Küpper, Christoph A1 - Rösch, Janina J. A1 - Winkler, Herwig T1 - Empirical findings for the usage of 5G as a basis for real time locating systems (RTLS) in the automotive industry T2 - Procedia CIRP Y1 - 2022 U6 - https://doi.org/10.1016/j.procir.2022.05.146 SN - 2212-8271 VL - 107 SP - 1287 EP - 1292 ER -