TY - GEN A1 - Karnapke, Reinhardt A1 - Richter, Martin A1 - Werner, Matthias T1 - Virtualization in robot swarms: past, present, and future T2 - 2024 IEEE 21st Consumer Communications & Networking Conference (CCNC) N2 - Robot swarms have come a long way since the first mobile sensor/actuator networks. Since then, we have seen the rise of operating systems for robots and swarm operating systems that ease the use of robots, and especially of large swarms of them, a lot. Still, the description of a task is often not easy and best done by experts. In this paper we envision future swarm operating systems, where task descriptions take a form which can be realized by non-experts. We describe our idea of hugely increased virtualization in the swarm and how this can be used to realize the aforementioned vision. KW - Actuators KW - Runtime KW - Operating Systems KW - Soft Sensors KW - Robot Sensing Systems KW - User Experience KW - Planning KW - Virtualization KW - Heterogeneity KW - Swarm Robotics KW - Transparency KW - Motion Y1 - 2024 SN - 979-8-3503-0457-2 U6 - https://doi.org/10.1109/CCNC51664.2024.10454838 SP - 1 EP - 6 PB - IEEE ER - TY - GEN A1 - Rotta, Randolf A1 - Chatharajupalli, Navya Sneha A1 - Naumann, Billy A1 - Schulz, Julius A1 - Karnapke, Reinhardt A1 - Werner, Matthias A1 - Nolte, Jörg T1 - Demo: B.A.T.M.A.N. mesh routing on ultra low-power IEEE 802.11 modules T2 - 2024 IEEE 49th Conference on Local Computer Networks (LCN) N2 - When implementing multi-hop mesh network protocols, efficient direct communication, route discovery, and route repair are crucial to achieve high network throughput. To our knowledge, there is no open mesh routing protocol available for ultra low power IEEE 802.11 modules. Previous work relied on single board computers like Raspberry Pi. We implemented the B.A.T.M.A.N. mesh protocol on the popular Espressif ESP32 along with a novel hybrid rate adaptation for the selection of efficient routes. In this demo we showcase challenges and solutions related to the implementation on ESP32 and how the hybrid rate adaptation improves end-to-end throughput. KW - ad-hoc networks KW - mesh networks KW - low power electronics KW - throughput Y1 - 2024 SN - 979-8-3503-8800-8 U6 - https://doi.org/10.1109/LCN60385.2024.10639789 SN - 2832-1421 PB - IEEE ER - TY - GEN A1 - Rotta, Randolf A1 - Schulz, Julius A1 - Naumann, Billy A1 - Chatharajupalli, Navya Sneha A1 - Nolte, Jörg A1 - Werner, Matthias T1 - B.A.T.M.A.N. Mesh Networking on ESP32’s 802.11 T2 - 2024 IEEE 49th Conference on Local Computer Networks (LCN) N2 - Mesh routing protocols are widely used in IoT and sensor networks. In recent years, the ESP32 Wi-Fi/BLE SoC became popular for prototyping IoT applications. However, the existing mesh networks for this platform lack efficient node to node communication, fast route discovery and repair, and energy efficiency. This paper addresses the formation of IEEE 802.11 based ad-hoc mesh networks without the delays inflicted by the Station to Access Point association protocol. We implemented the B.A.T.M.A.N. protocol on top of the ESP32 Wi-Fi MAC interface and integrated it into the LwIP network stack. The performance evaluation with respect to UDP/IP and TCP/IP end-to-end throughput shows the general usefulness but also identifies bottlenecks caused by limitations of the existing MAC interface. Overall, this opens an interesting opportunity for research on mesh protocols by providing a simpler platform than full featured Wi-Fi routers; and for wireless IoT applications by providing higher throughput than subGHz and BLE technologies. KW - wireless communication KW - mesh networks KW - wireless sensor networks KW - routing protocols Y1 - 2024 SN - 979-8-3503-8800-8 U6 - https://doi.org/10.1109/LCN60385.2024.10639698 SN - 2832-1421 SN - 2831-7742 SP - 1 EP - 7 PB - IEEE ER - TY - GEN A1 - Richter, Martin A1 - Karnapke, Reinhardt A1 - Werner, Matthias T1 - Utilizing sensor and actuator virtualization to achieve a systemic view of mobile heterogeneous cyber-physical systems T2 - Proceedings of the 14th International Conference on Simulation and Modeling Methodologies, Technologies and Applications N2 - When programming cyber-physical systems, application developers currently utilize physical sensors and actuators individually to achieve the desired observations and impacts within the physical world. This is an error-prone and complex task given the size, heterogeneity, and mobility of prevailing cyber-physical systems. We introduce an application model that allows the application developers to take a physical perspective. By means of this model, the programmers describe desired observations and influences with respect to the physical world without directly referencing physical devices. We present an additional model for a runtime environment that transparently utilizes the available physical devices to reach the application developers’ targets. We show that an implementation of our models is functional via simulation. KW - Cyber-Physical Systems KW - Virtualization KW - Mobility KW - Heterogeneity KW - Transparency Y1 - 2024 SN - 978-989-758-708-5 U6 - https://doi.org/10.5220/0012715800003758 SP - 207 EP - 214 PB - SCITEPRESS - Science and Technology Publications ER -